Quidway 2000TP-EA Series of Carrier-class Access Switches Overview of the Product Quidway S2000TP-EA carrier-class series of switches (hereinafter referred to as S2000TP-EA) is a carrier-class Ethernet access switch launched by Huawei to meet detailed operation requirements. The S2000TP-EA series of switches supports powerful access control list (ACL) and is a real corridor security intelligent access switch. It also supports Ethernet HWPING, which greatly enhances management and maintenance. The S2000TP-EA series of switches supports QinQ, service control based on VLAN and multicast VLAN and can provide users with rich and flexible service features. The 2000TP-EA series of switches is greatly improved in terms of security, operability, manageability and service scalability and is a new generation of carrier-class corridor access product. The 2000TP-EA series of carrier-class access switches consists of, S2016TP-EA, S2403TP-EA, and S2403TP-PWR-EA. Appearance of the Product 2016TP-PWR-EA S2403TP-EA/2403TP-PWR-EA : 8 10/100Base-TX Ethernet ports, 1 100/1000BASE-X SFP or 1 10/100/1000BASE-TX interface, supporting 220 V AC power or -48 V DC power S2016TP-EA: 16 10/100Base-TX Ethernet ports, 2 100/1000BASE-X SFP or 2 10/100/1000BASE-TX interfaces, supporting 220 V AC power or -48 V DC power : 16 10/100Base-TX Ethernet ports with the power over Ethernet (PoE) function, 2 100/1000BASE-X SFP or 2 10/100/1000BASE-TX interfaces, supporting 220 V AC power S2403TP-EA: 24 10/100Base-TX Ethernet ports, 2 100/1000BASE-X SFP or 2 10/100/1000BASE-TX interfaces, supporting 220 V AC power or -48 V DC power S2403TP-PWR-EA: 24 10/100Base-TX Ethernet ports with the power over Ethernet (PoE) function, 2 100/1000BASE-X SFP or 2 10/100/1000BASE-TX interfaces, supporting 220 V AC power or -48 V DC power
Product Features Service control based on VLAN The S2000TP-EA series of switches supports rate control for traffic. It can provide different bandwidth assurance for different services and different users. As a result, it can control the bandwidth occupied by the traffic more accurately, thus meeting detailed operation requirements of network. The S2000TP-EA series of switches supports delivery of ACL rules based on VLAN. It can deliver ACL rules according to different services and users and ensures the security of services and users with higher priority. The S2000TP-EA series of switches also supports traffic measurement based on VLAN. It can measure the bandwidth used by each service or each user, thus facilitating operators to charge by traffic. The S2000TP-EA series of switches supports QinQ and can encapsulate the VLAN tag of a private network into the VLAN tag of a public network so that messages can traverse operator s backbone network with two layers of VLAN Tag. Complete security intelligent control policies The S2000TP-EA series of switches supports the ACL based on source MAC address, destination MAC address, source IP address, destination IP address, layer-4 port, protocol type, VLAN, Ethernet frame protocol and class of service (CoS). It can filter messages according to features of users and provide end-to-end protection against virus and hackers attacks. The S2000TP-EA series of switches supports binding of IP address, MAC address, VLAN and port and can create binding rules to prevent invalid intrusion according to DHCP Snooping. The S2000TP-EA series of switches supports rate control for ports (the rate control granularity can be up to 64kbps) to prevent malicious occupation of network bandwidth. The S2000TP-EA series of switches supports suppression of broadcast storm and MAC black hole, isolation from or interworking with ports in the VLAN, and the HWTACACS function, which fully ensures the security of operators networks. Powerful service capability The S2000TP-EA series of switches supports rich layer-2 multicast protocols such as IGMP Snoopingv1&v2&v3 and IGMP Snooping Filter/Fast-Leave. It also supports multicast VLAN and can serve as the corridor multicast replication point and control point. The S2000TP-EA series of switches supports IPv6 management features and facilitates transition from the IPv4 network to IPv6 network. The S2000TP-EA series of switches supports DHCP Snooping, DHCP Option82, and DHCP Snooping Trust and can meet operation requirements of the IPTV service. S2000TP-PWR-EA supports PoE. S016TP-PWR-EA can deliver the necessary power to support 8 ports at 15.4W, 16 ports at 7.7W. S2403TP-PWR-EA can support 24 simultaneous full-powered
PoE ports at 15.4W for maximum powered-device support. It can remotely supply power for the equipment connected with it over the Ethernet, thus solving the problem of power supply for terminal equipment. The S2000TP-EA series of switches supports bi-directional module over a single optical fiber and can realize bi-directional transmission over a single optical fiber, thus solving shortage of optical resources. Management and maintenance The S2000TP-EA series of switches supports HWPING. It can check whether the DHCP, HTTP and SNMP services are available and the service response time and detect the delay and jitter of networks so that operators can master the current situation of networks. The S2000TP-EA series of switches supports RSPAN remote port mirroring, which breaks through the restriction of simultaneous setting for traditional mirror port and source mirror port. It supports the virtual cable test (VCT) and can report link failure within 5 seconds. It also supports DLDP unidirectional link detection and can automatically detect the fault of unidirectional communication. The S2000TP-EA series of switches supports the 1:1 or N:1 mirroring and can monitor network traffic in multiple points for users. The S2000TP-EA series of switches supports SNMP V1/V2/V3 and configuration and management for the imanager network management system (NMS). It also supports the command line interface (CLI), Telnet, and HGMP cluster management, thus facilitating equipment maintenance. Product Specifications Port 8*10/100TX+1*10/10 0/1000BASE-TX or 100/1000BASE-X SFP 16*10/100TX+2*10/1 00/1000BASE-TX or 100/1000BASE-X SFP 24*10/100TX+2*10/100/1000BAS E-TX or 100/1000BASE-X SFP 10/100/1000BASE-T[100m] 100BASE-SX[2km] Optional module 100BASE-LX[15km] 100BASE-LH40[40km] 1000BASE-SX[0.5km] 1000BASE-LX[10km] 1000BASE-LH40[40km])
Layer-2 line speed Packet forwarding rate: 2.68 Mpps Port capacity: 3.6 Bus bandwidth: 19.2 Packet forwarding rate: 5.36 Mpps Port capacity: 7.2 Bus bandwidth: 19.2 Packet forwarding rate: 6.55 Mpps Port capacity: 8.8 Bus bandwidth: 19.2 Supports 8K MAC address list. Supports adding or deleting the MAC address list manually. MAC address list Supports configurable aging time of MAC addresses. Supports closing study MAC by port/aggregation groups. Supports port/aggregation groups for restricting the number of MAC addresses. Supports black hole MAC. Supports IEEE 802.1Q (VLAN). The integrated equipment can support up to 4000 VLANs. VLAN features Supports the VLAN based on port. Supports multicast VLAN. Supports QinQ. Supports port rate auto-negotiation. Supports IEEE802.3x flow control (full duplex) or back-pressure based flow control (half duplex). Port features Supports the network cable type MDI/MIDX of Ethernet ports. Supports copying basic configuration between ports. Supports port outloop and inloop test. Supports configurable interval of port information statistics. Supports unknown unicast suppression. Port security Port convergence Supports multicast storm suppression. Supports broadcast storm suppression. Supports IEEE 8.2.3ad (link aggregation control protocol (LACP)). Supports load sharing among ports of the aggregation group. Supports isolation of ports in the VLAN. Port mirroring Supports 1:1 or n:1 mirroring. Port rate control Supports rate control based on ports. The bidirectional rate is 64 kbps.
STP/RSTP/ MSTP Supports STP/RSTP/MSTP. Supports STP protection. Supports IGMP v1/v2&v3 Snooping. Multicast Supports controllable multicast. Support MVLAN. Supports traffic classification based on source MAC address, destination MAC address, source IP address, destination IP address, layer-4 port, protocol type, VLAN, Ethernet frame protocol and CoS. QoS/ACL Supports marking priority based on traffic, modifying the VLAN ID of messages, and redirecting messages to the port or next hop of IP address. Supports four port priority queues. Supports WRR, SP, and WRR+SP queue scheduling. Loading and upgrade Supports FTP loading and upgrade. Supports TFTP loading and upgrade. Supports configuration of CLI. Supports Telnet configuration. Management Supports SNMPV1/V2c/V3. Supports RMON. Supports cluster management HGMP V2. Supports SSH. Supports HWPING. Supports Telnet maintenance. Maintenance Supports port loopback detection. Supports RSPAN remote port mirroring. Supports VCT. Supports device link detection protocol (DLDP). Dimensions (W x D x H) mm 230*160*43.6 360*160*43.6 300*260*43.6(POE) 440*160*43.6 440*420*43.6(POE) Weight < 3kg < 3kg <6.5kg (POE) < 3kg <6.5kg (POE)
AC: Rated voltage range: 100-240V AC; 50/60 Hz Power supply Maximum voltage range: 90-264V AC; 50/60 Hz DC: Rated voltage range: -48 to -60 V DC Maximum voltage range: -36 to -72 V DC Power consumption <10 W <12 W/160W(8 ports fully configured) <20W/395W (24 ports fully configured) Ambient temperature 0 C - 45 C Relative humidity (not condensation) 10% - 90% Information of Order The table below lists the hosts of S2000-EA series of Ethernet switches: Description Quantity Remarks host (AC power, 220 V input voltage) 1 Optional -DC host (DC power, -48 V input voltage) 1 Optional S2016TP-EA host (AC power, 220 V input voltage) 1 Optional S2016TP-EA-DC host (DC power, -48 V input voltage) 1 Optional S2403TP-EA host (AC power, 220 V input voltage) 1 Optional S2403TP-EA-DC host (DC power, -48 V input voltage) 1 Optional host (AC power, 220 V input voltage) 1 Optional S2403TP-PWR-EA host (AC power, 220 V input voltage; or DC power, -48 V input voltage) 1 Optional
The table below lists the interface modules of S2000-EA series of Ethernet switches: Module name Central wavelength Type of user interface connector provided by SFP module Interface cable specifications and maximum transmission distance Quantity Remarks 100BASE-FX-M M-SFP 100BASE-FX-S M-SFP 1310nm LC 62.5/125µm multi-mode optical fiber 2km 9/125µm single-mode optical fiber 15km 1000BASE-SX-S FP 850nm LC 50/125µm multi-mode optical fiber 550m 1000BASE-LX-S FP 1310nm Single-mode optical fiber 10km 1000BASE-T-AN -SFP RJ-45 Category-5 twisted pair 100m