Technaxx Fitness Wristband Trackfit TX 63 User Manual This device complies with the requirements of the standards referred to the Directive R&TTE 1999/5/EC. The Declaration of Conformity you find here: www.technaxx.de/ (in bar at the bottom Konformitätserklärung ). Before using the device the first time, read the user manual carefully. This device has a rechargeable battery. It must be fully charged before first use. NOTE: Charge the battery of the device every 2 3 month if it is not used! Service phone No. for technical support: 01805 012643 (14 cent/minute from German fixed-line and 42 cent/minute from mobile networks). Free Email: support@technaxx.de Features Wristband to monitor your fitness, your sleep and your active phases Displays real activity step, distance covered and calories burned Clock & date display, calendar function Caller name or telephone number Notifications: achieved goals, MSN, @, SMS Anti-lost function Vibrating function Sleep monitoring & wake up with vibrating alarm Displays statistics via diagram in the APP Bluetooth 4.0 BLE connection, controllable via APP Free ios and Android APP Easy handling with 1 key IP66 protection class (dustproof & against waterjet) Especially suitable for outdoor activities Technical specifications Bluetooth / Distance Bluetooth version 4.0 BLE / max. 10m Display / Resolution 0.91 OLED display (2.3cm) / 128 x 32 pixels Protection class IP66 (dustproof + protection against water jets) Charging port at device Displacement contact Charger USB charger with clamping function Data transmission BT 4.0 BLE or USB Time synchronization Supports RTC (Real Time Clock) and time sychronization Accelerate sensor Supports 3 AXIS Built-in rechargeable lithium-ion polymer 60mAh battery, 3.7V / Power supply Charging time ~2 hours / Working time ~36 hours / Stand-by time ~7 days Material PC half transparent (housing)+ TPU (wristband) Weight / Dimensions 21g / (L) 14 19.5 x (W) 1.7 x (H) 1.1cm Package Contents Fitness Wristband Trackfit TX-63, USB charger with clamping function, User Manual Apple ios Devices: supports ios device with 4.0 BLE, ios 7.0 and above. Android Devices: supports almost all Android devices with 4.0 BLE, Android system 4.3 and above. Approve which ios or Android version your Smartphone is using.
View of the wristband 1 OLED Screen 4 Strap colsure of the wristband 2 Mounting hole for the wristband (from the inside) 5 Charging port 3 Mounting hole for the closure of the wristband 6 Operation button (from the outside) 7 Wristband 1. Charging Before first use, charge the device as shown in the picture below and make sure that the charging hole be connected in the correct way. Be careful, not to charge in the opposite direction, or it will lead the device to be short-circuit or scrap. a with cycle = Operation button
TX-63 indicates the battery charge level as when it is being charged. If not, check whether you charge it in the correct way and make sure the USB interface is connected in correct way. TX-63 can be charged directly via USB (5V). It shows charged. Standby time are ~ 7 days (depending on the actual usage). when it is full Do not try to take out built-in battery in case of danger. Use the TX-63 USB charging line for charging. Please keep using and charging it. TX-63 Bluetooth will be off and cannot sync data while being charged. 2. Download & installion My Fitness Pro APP Android APP: Search for Technaxx My Fitness Pro in Google TM Play Store to download the APP. ios APP: Search for Technaxx My Fitness Pro in Apple TM Store to download the APP. Install the respective APP. 3. Device initialization The device will display when you use it for the first time. Press the button for more than 3 seconds until time displays on the screen that means the initialization is completed. 3.1. How to use Android APP and ios APP 3.1.1. Sports Main function: upload sports and sleep data, sync time, check steps/distance/calories/ battery usage state for every day/every week/every month. 3.1.1.1. You can upload data, sync time and check battery usage state all by Synchronization the TX-63 with your phone When using TX-63 for the first time, synchronize it with your mobile phone via the My Fitness Pro APP.
1. Activate Bluetooth, internet on your phone, open the APP, register it and then you will see the main interface, click in the Sports interface. 2. Quickly press the button of TX-63 to light screen (do not hold the button for a long time, in case it will switch into the Sleep mode). 3. The APP will display when in syncing until it s 100% completed. 4. The first time synchronization means reset for TX-63, so after this down all existed data will be cleared of wristband. 3.1.1.2. How to check steps, distance, calories and sleep data by APP Click the triangle icon to choose a date which you need to check, then click steps, distance, calories, sleep for detail data check at that day. data statistics.. The user can also choose Day Week Month to check the 3.1.2. Reminder Main functions: create, add, modify, update and delete a reminder 3.1.2.1. How to create a reminder Tap + to choose a reminder s time and type; to choose the reminder s happen date by self-defined repeat. Click to save the reminder. Notice: 20 reminders could be created at most. 3.1.2.2. Reminder Modification - How to modify an reminder s mode In the interface, click in one of the reminders to turn on or turn off the Reminder. When the reminder icon changes to, the device will remind you by vibration following the settled time. Otherwise, it will not remind you.
3.1.2.3. How to modify an reminder s content Click in the main interface, then click the to modify the reminder content. How to operate you can refer to 3.1..2.2. 3.1.2.4. How to delete an reminder Click the Edit, then click the item s left side. 3.1.3. Setting 3.1.3.1. My profile Click on to Setting and put in your information. First, under My Profile, it is important to record accurate information to ensure that the reading and outcome will be more beneficial to the user. Here you can add information s such as your name, your size and your weight.. Click the save once finishing, return for 3.1.3.2. Preset sleeps Click on Preset sleep to enter your desired bed and wake up time automatically. Close it th e device will not enter the sleep mode automatically. 3.1.3.3. Goals Set the goals of steps, distance, calories and sleep by rolling up and down, click the Done for confirmation, or click the Cancel for reset. Click on Save once finishing. 3.1.3.4. Reset Go in the APP in the menu Settings. Tap Decoupling and decouple the wristband from your mobile phone. The wristband will reset to factory defaults. 3.1.3.5. Time format Time format can be 12 hours or 24 hours 3.1.3.6. Log out Click Log out can quit the account, or change to other account. 3.1.3.7 If nothing works! Press and hold the button on the wristband. Only then connect the wristband to the power supply. The icon for battery charging appears. The wristband will be activated and can now be operated normally again.
4. Display mode 4.1. Set up Once reset the device or for the first use, it will show SET UP. 4.2. Activity mode Interfaces of activity mode are as following: 1. Time, Date, Battery 2. Steps 3. Distance 4. Calories It will display the data and reminder you once finishing targets under the activity mode. Lighten the display by pressing the button can open the device Bluetooth. The device will record the intraday data; data will be zero clearing on 24:00 automatically. 4.3. Sleep mode Interfaces of sleep mode are as following: 1. Time, Date, Battery 2. Sleep It will record the user s sleep status under the sleep mode. Reminder notifications are disabled during this period of time. 4.4. Switch of activity mode and sleep mode Press the button for 3 seconds under the activity mode, it will vibrate you and enter the sleep mode. User can exit sleep mode by pressing the button for 3 seconds, or it exits according to user activity automatically. Device shows and records the data as long as switching the relevant mode.
5. Notification 5.1. Messages 1. Calendar event 2. Social media 3. Email 4. Missed calls 5. Call reminder It just shows the caller number for the mobile phone. Smartphone. It can show the name of the caller if you have set address book in your 6. SMS 7. Bluetooth is disconnected 5.2. Charging reminder When the device battery is low up to 10%, it will show You cannot operate the device when it under the low power. and vibrate you. 5.3. Time sync. Before set up the device, if charge the device when the power runs out, it will show PLS SYNC TIME once take out of the charging clip. Connect it via Bluetooth with your mobile phone and sync time. 5.4. Memory full reminder Once the device memory up to 80% it will vibrate to alarm you.
5.5. Sync data reminder When the device need to sync data, battery is going to run out, or memory is full up to 100%, it will vibrate you when you lighten the device. 5.6. Achieved goals reminder achieved. once you hit one of your daily goals, it will gently vibrate and display 5.7. Event reminder Once hit the event reminder, the device will vibrate you and show the icon as below: Sport Sleep Eat Medicine Wake up User-defined Once you hit the reminder, press the button to confirm it, if not, it will vibrate you after two minutes.
6. Use of the APP (refer 3.1.) When starting the APP My Fitness Pro you see following pictures below. Sign up or Login! For Login put your email & password. You forgot your password? Then reset your password with pressing Reset My Password to sign up fill all required fields like the following pictures.
After successful registration you see the picture below. Select TX-63 & press Next. When Bluetooth was activated you see the following picture & select your wristband & press the button Next.
To continue with setting, enable the Bluetooth on your Smartphone. If no Bluetooth device is found, go to the Bluetooth settings of your Smartphone and disable / enable the Bluetooth connection. If still no Bluetooth device is found, try the step above again. When the appropriate wristband was found you will receive a pairing, request tap on the display to accept the pairing. When pairing with TX-63 was successful, you see the picture below and start the button Start now. Pairing failed then TRY AGAIN!
Tap on, to synchronize your bracelet with the mobile phone. Now you can track your progress on your mobile phone. The graphic down shows your daily achieved activities. The graphic down shows your weekly achieved activities. The graphic down shows your monthly achieved activities.
The graphic down shows percentage of your daily achieved activities. The graphic down shows your monthly achieved activities in graphic. The graphic down shows your monthly achieved activities in graphic. The graphic down shows your monthly achieved Calorie in graphic.
The following picture shows your sleep status. The graphic down shows percentage of your daily sleep status.
Main Setting page: The following picture shows type of notifications which can be selected. You can select all types of notifications. Set your daily goals.
To enter you sleep activities, adjust under the mode Preset Sleep your estimated sleep time. Under Time Format you can choose between the 12h (12 hours) or 24h (24 hours) time format. Set your reminders from the following:
Press at the + symbol. Select the type of reminders and select the date for which you need the reminder and put the time to remember. After you finished setting the reminder you can edit every reminder which was saved! Save the reminders after editing. Profile can be edited like in the following pictures (refer to 3.1.3.1. My profile).
Here you can set your birthday, gender, height and weight.
Remarks & Safety hints & Warnings Charge the device in time when it shows low power, and please use our standard charging clip. Do not put the device in damp environment or rain during the charging proess. Do not put the device too high or too low temperature. Do not put the device into the direct sunlight place for a long time & do not close to the fire. Do not let your device touch any sharp objects Do not misuse the device such as, do not fall, dismantling, extrusion, puncturing, baking, burning, etc. Keep the surface of the device clean, but do not use organic solvents. Do not clean the device by abrasive cleaning. Do not give it to children, small parts may cause choking. Security and Disposal Hints for Batteries: Hold children off batteries. When a child swallowed a battery go to a doctors place or bring the child into a hospital promptly! Look for the right polarity (+) and ( ) of batteries! Always change all batteries. Never use old and new batteries or batteries of different types together. Never short, open, deform or load up batteries! Risk of injury! Never throw batteries into fire! Risk of explosion! Hints for Environment Protection: Packages materials are raw materials and can be recycled. Do not disposal old devices or batteries into the domestic waste. Cleaning: Protect the device from contamination and pollution (use a clean drapery). Avoid using rough, coarse-grained materials or solvents/aggressive cleaner. Wipe the cleaned device accurately. Important Notice: Should battery fluid leak from a battery, wipe the battery case with a soft cloth dry. Distributor: Technaxx Deutschland GmbH & Co.KG, Kruppstr. 105, 60388 Frankfurt a.m., Germany