Circuit Protectors CP31E, 32E, 33E, 34E CP31V, 32V, 33V, 34V

Similar documents
Magnetic and Hydraulic-Magnetic Circuit Breaker 8340-F...

Magnetic and Hydraulic-Magnetic Circuit Breaker 8340-F...

3 Pole Contactors with AC operating coils

MULTI 9 System Catalog UL Recognized NC100H Supplementary Protectors

Magnetic and Hydraulic-Magnetic Circuit Breaker

Section 4 Ground-Fault Protection Devices

RE7RB13MW adjustable off-delay timing relay s V AC DC - 2OC

MULTI 9 System Catalog UL Recognized C60N Supplementary Protectors

Micro Contactor MA Series

RE7YA12BU time delay relay for star-delta starter s - 24 V AC DC - 2OC

CP30F Series Circuit Protector for Improving Safety and Wiring Workability

DIN Series MINIATURE CIRCUIT BREAKERS, RESIDUAL CURRENT CIRCUIT BREAKERS. Introducing the DIN Series High-quality, high-performance circuit breakers

Magnetic and Hydraulic-Magnetic Circuit Breaker 8340-T...

RM4JA01F current measurement relay RM4-J - range ma V AC

Plug-in relays RH control relays Instantaneous (RHN) and latching (RHK)

MG24434 Supplementary Protector SUPPLEMENTARY PROTECTOR, 240VAC, 16A, CIRCUIT BREAKER TYPE: STANDARD

Issued February DATA SHEET 5SX2 MCB. Based on Siemens Industrial Control Catalog

209/219/229 Multi-Pole Circuit Protectors 202 branch circuit applications such as EDP, air conditioners, panel boards

Products :: Circuit Protection :: Hydraulic/Magnetic Circuit Breakers

Thermal-Magnetic Circuit Breaker 4220-T...

Mini Contactors. Mini Contactor Relays 4-pole 20 Auxiliary Contact Blocks. Interface Contactor Relays. Mini Contactors 22 Auxiliary Contact Blocks

RM4JA32MW current measurement relay RM4-J - range A V AC DC

RM4TA32 three-phase network control relay RM4-T - range V

RE7YA12BU. Main. Contacts type and composition Component name Time delay type. 24 V AC/DC at 50/60 Hz V AC/DCat 50/60 Hz

FAZ Supplementary Protectors, FAZ Miniature Circuit Breakers, P2 Disconnect Switches Overview

RE8TA31BU industrial timing relay s - type A - 24 V AC/DC, V AC - 1 C/O

RSB1A160JD interface plug-in relay - Zelio RSB - 1 C/O - 12 V DC - 16 A

RM4TR31 three-phase network control relay RM4-T - range V

RE7RM11BU off-delay timing relay with control contact s - 24 V AC DC - 1OC

4 C/O. Contact material AgNi AgNi gold-plated Nominal contact current Inrush current

low voltage GLOBAL CATALOGUE RANGE Motor Control Contactors - Thermal Overload Relay s - Manual Motor Starters

1492-SP Supplementary Protectors

APL/UPL, 205/295 Series Magnetic Circuit Protectors

ABE7R16S210 sub-base - soldered electromechanical relays ABE7-16 channels - relay 10 mm

ABE7R16S210 sub-base - soldered electromechanical relays ABE7-16 channels - relay 10 mm

IELR Rail-Mount Series Magnetic Circuit Protectors

RE8YG31BUTQ industrial timing relay s - type Qc - 24 V AC/DC, V AC - 1C/O

Time Delay Values (E-Series)

PERCENT OF RATED CURRENT

RE8YG31BUTQ industrial timing relay s - type Qc - 24 V AC/DC, V AC - 1C/O

ABR1S102B. Main. Contacts type and composition [Uc] control circuit voltage Control circuit type

Products :: Circuit Protection :: Hydraulic/Magnetic Circuit Breakers

APG/UPG/IPG Series Existing Designs Only APG/UPG/IPG

RPM42P7 power plug-in relay - Zelio RPM - 4 C/O V AC - 15 A - with LED

RXM4AB1BD miniature plug-in relay - Zelio RXM - 4 C/O - 24 V DC - 6 A

Industrial Control Relays Relays and terminal module RS type

3 - Interfaces. Contents 0. Interfaces for discrete signals. Selection guide... page 3/2. # Electromechanical interface modules...

IELR Series

K1D004ACH cam switch - 4-pole A - for Ø 22 mm

1.3. Miniature Circuit Breakers and Supplementary Protectors. Contents. WMZS Circuit Breaker. UL 1077 DIN Rail Supplementary Protectors

Model Number Structure

9926 Series Branch Rated Circuit Breakers AC Version

ABB i-bus KNX Switch Actuator, x-fold, 6 A, MDRC SA/S x.6.1.1, 2CDG x R0011

RM4JA31M current measurement relay RM4-J - range ma V AC

Product Guide. UL 1077 DIN Rail Supplementary Protectors

Kuhnke Technical Data. Contact Details

K1F037MCH cam voltmeter switch - 3L and 3L-N A - for Ø 22 mm

Magnetic Circuit Protectors 153. Multi-Pole Circuit Protectors 154. APL/UPL, 205/295 Barriers 155. Configurations 156. Operating Characteristics 158

PR - PCB relay. 42 catalog 2002 e / the PR-PCB relay. By using best materials and because of the simple construction the highest failsecurity

E-Series General Specifications

XCKL115 limit switch XCKL - thermoplastic roller lever - 1NC+1NO - snap - Cable gland

ALLEN BRADLEY RELAY Bulletin 700-HF

Control relays. K mini-control relays. Conforming to standards IEC/EN , , NF C , VDE 0660 UL, CSA, DEMKO, NEMKO, SEMKO

RPM13F7 power plug-in relay - Zelio RPM - 1 C/O V AC - 15 A - with LED

Note: Each relay to be mounted must incorporate a coil that has proper specifications within the maximum rated voltage range.

XCKM102 limit switch XCKM - steel roller plunger - 1NC +1NO - snap action - Pg11

24973 Circuit Breaker MINIATURE CIRCUIT BREAKER, 440VAC, 10A, CIRCUIT BREAKER TYPE: STANDARD

Selection Guide. Control Circuit and Load Protection. Allen-Bradley 1489-M2C020

60103 Circuit Breaker

XCKN2118G11 limit switch XCKN - thermoplastic roller lever - 1NC+1NO - snap - Pg11

Relays & Sockets RR Series Power Relays. Part Number Selection

NF44E-.. / NFZ44E-.. Contactor Relays AC / DC Operated - with Screw Terminals

29 $ Manual Motor Starters FREESHIPPING. MOTOR CONTROLS 25. Features: MMS-32H Frame. MMS-63H Frame.

Model Number Structure

G3PC. Model Number Structure. Solid State Relays with Failure Detection Function. Model Number Legend

Timers. GT5Y Series ON Delay Timers. ±3% maximum (over 10 to 50 C, reference temperature 20 C) Setting Error. ±10% maximum

RM4UA33M voltage measurement relay RM4-U - range V V AC

TeSys IEC Contactors and Overload Relays

Dual Channel Monitor for Measurement of Speed and Ratio with SIL1 requirements Series D224.xx

TeSys contactors From 115 to 2750 A

Ihr autorisierter Distributor: Neumüller Elektronik GmbH

Electronic timer CT-VBS OFF-delayed without auxiliary voltage, for DC contactors Data sheet

Conforms to VDE0435/2021 C/250, VDE0110, VDE0106/P100 Conforms to EN , pren

IEC Type Industrial Control Relays; TeSys D-Line, K-Line, and SK-Line K-Line Ordering Informaiton

K1F003MCH cam ammeter switch - 3 circuits A - for Ø 22 mm

Kuhnke Technical Data. Contact Details

Transistor drive 2c/4c 5A slim power relays

Supplementary Circuit Protectors Type GSB63

Protection Equipment

XCKS141H29 limit switch XCKS - th.plastic roller lever var. length - 1NC+1NO - snap - M20

Introduction Circuit Protection

Motor protection relays

K-Line Mini - Contactors, Overload Relays and Accessories

UL 489 DIN Rail Miniature Circuit Breakers

1.2. Miniature Circuit Breakers and Supplementary Protectors. Contents. WMZ Circuit Breaker. UL 489 DIN Rail Miniature Circuit Breakers

Approved Standards. Motor Protection Circuit Breaker (MPCB) J7MN. MPCB system (motor protection CLASS 10) Auxiliary contact modules.

UL 489 DIN rail branch circuit breakers

WMS SUPPLEMENTARY PROTECTORS

ZB5FG09 flush mounted selector switch head key pos stay put

TIMERS FOR ALL APPLICATIONS

Transcription:

CP3E, 32E, 33E, 34E CP3V, 32V, 33V, 34V CP-E and CP-V circuit protectors 250V AC 0.05A to 30A 65V DC 0.05A to 30A Description CP-E, CP-V circuit protectors have been specially developed for computers, communication equipment and peripheral applications. In these situations power irregularities can lead to serious and expensive damage, and reliable protective equipment is required. FUJI circuit protectors meet this need. These protectors are available with ratings from 50mA to 30A. They are widely used in FA, office machinery, communication equipment and industrial computer-controlled equipment. They are also suitable for extremely severe service since they can withstand mechanical shocks up to 98m/s 2. Features Available in instantaneous, short time, medium time and long time delay types, thus making them suitable for a wide range of electronic applications. Also available in types having inertia delay characteristics. These do not trip due to inrush current. For internal circuits, series trip, shunt trip, relay trip and switch types are available. Circuit protectors with an auxiliary and alarm switch are also available. Single pole to 3-pole CP types can be operated with a single handle. Handle holes are easily made in panels. Widths down to 9mm. Standards : CP-E, CP-V (File No. E96846), (File No. E8346 for switch type), Socket CP-S (E96846SP, E8346, LR67978 (CSA C22.2 No.4)) TÜV (IEC): CP-V(R50064785) Accessories Auxiliary switch (Type W) This switch is used for indicator lamp or control circuit. Alarm switch (Type K) This switch can be connected to a warning lamp or buzzer to indicate when the circuit protector has been tripped. Auxiliary (W) and alarm (K) switch for low level circuit are also available on request. CP3E with socket Specifications SM-393 CP3V SM-376 SM-382 CP32E Rail mounting Socket CP-S2 Type CP3E, V CP32E, V CP33E, V CP34E, V Pole -pole 2-pole 3-pole 4-pole Rated insulation voltage (Ui) 250V AC 50/60Hz, 65V DC Rated operational voltage (Ue) 250V AC 50/60Hz, 60V DC Rated current 0.05,, 0.25, 0.5, 0.75,, 2, 2.5, 3, 5, 7.5, 5, 20, 25, 30A Rated breaking capacity 00A at 250V AC 00A at 60V DC Operating characteristic Long time delay, Medium time delay Short time delay, Instantaneous tripping Tripping mechanism Hydraulic-magnetic Ambient temperature C to +60 C Electrical durability 000 operations Terminals Main circuit Tab, screw, printed board Auxiliary circuit Tab, printed board Accessories Auxiliary switch (W, W) Available Alarm switch (K, K) Available Inertia delay device (D) Available Mass (Approx.) 60g 20g 80g 240g Ratings of auxiliary and alarm switches 250V AC Resistive load: 3A Inductive load: 2A 25V AC Resistive load: 5A Inductive load: 3A 60V DC Resistive load: A Inductive load: 0.5A 30V DC Resistive load: 4A Inductive load: 3A Inertia delay device (Type D) When a circuit carrying loads such as transformers or lamps is closed, an extremely large inrush current flows. This inertia delay device is designed to prevent the circuit protector from operating erroneously due to such inrush current and to carry out an interruption within the prescribed operating characteristics in the face of an overcurrent. For instance, the following graph explains that the protector does not operate even when a pulse current of approx. 8 times (peak value) rated current with a pulse width of 8ms flows. Scale factor of rated current (%) Inertia delay characteristics 2000 000 8000 6000 4000 2000 With inertia delay device 0 2 3 4 5 6 7 8 9 Pulse time [ms] Scale factor of the rated current (%) Peak value of pulse current Rated current for protector Without inertia (for reference) delay device Waveform of pulse current: Sinusoidal wave or parabolic pulse Peak value of pulse current 0 08 Information subject to change without notice 08/23 Pulse time

CP3E, 32E, 33E, 34E Versions Internal circuit Operating CP3E (-pole) CP32E (2-pole) CP33E (3-pole) CP34E (4-pole) characteristics Type Type Type Type Series trip type Long time CP3E/ CP32E/ CP33E/ CP34E/ Medium time CP3EM/ CP32EM/ CP33EM/ CP34EM/ Short time CP3EF/ CP32EF/ CP33EF/ CP34EF/ Instantaneous CP3EI/ CP32EI/ CP33EI/ CP34EI/ Series trip type Long time CP3E/ D CP32E/ D CP33E/ D CP34E/ D With inertia delay device Medium time CP3EM/ D CP32EM/ D CP33EM/ D CP34EM/ D Short time CP3EF/ D CP32EF/ D CP33EF/ D CP34EF/ D Series trip type Long time CP3E/ W CP32E/ W CP33E/ W CP34E/ W With auxiliary switch Medium time CP3EM/ W CP32EM/ W CP33EM/ W CP34EM/ W Short time CP3EF/ W CP32EF/ W CP33EF/ W CP34EF/ W Instantaneous CP3EI/ W CP32EI/ W CP33EI/ W CP34EI/ W Series trip type Long time CP3E/ WD CP32E/ WD CP33E/ WD CP34E/ WD With auxiliary switch Medium time CP3EM/ WD CP32EM/ WD CP33EM/ WD CP34EM/ WD and inertia delay device Short time CP3EF/ WD CP32EF/ WD CP33EF/ WD CP34EF/ WD Series trip type Long time CP3E/ K CP32E/ K CP33E/ K CP34E/ K With alarm switch Medium time CP3EM/ K CP32EM/ K CP33EM/ K CP34EM/ K Short time CP3EF/ K CP32EF/ K CP33EF/ K CP34EF/ K Instantaneous CP3EI/ K CP32EI/ K CP33EI/ K CP34EI/ K Series trip type Long time CP3E/ KD CP32E/ KD CP33E/ KD CP34E/ KD With alarm switch Medium time CP3EM/ KD CP32EM/ KD CP33EM/ KD CP34EM/ KD and inertia delay device Short time CP3EF/ KD CP32EF/ KD CP33EF/ KD CP34EF/ KD Shunt trip type Long time CP3E2/ CP32E2/ CP33E2/ CP34E2/ Medium time CP3E2M/ CP32E2M/ CP33E2M/ CP34E2M/ Short time CP3E2F/ CP32E2F/ CP33E2F/ CP34E2F/ Instantaneous CP3E2I/ CP32E2I/ CP33E2I/ CP34E2I/ Shunt trip type Long time CP3E2/ D CP32E2/ D CP33E2/ D CP34E2/ D With inertia delay device Medium time CP3E2M/ D CP32E2M/ D CP33E2M/ D CP34E2M/ D Short time CP3E2F/ D CP32E2F/ D CP33E2F/ D CP34E2F/ D Relay trip type Long time CP3E3/ CP32E3/ CP33E3/ CP34E3/ (Current trip) Medium time CP3E3M/ CP32E3M/ CP33E3M/ CP34E3M/ Short time CP3E3F/ CP32E3F/ CP33E3F/ CP34E3F/ Instantaneous CP3E3I/ CP32E3I/ CP33E3I/ CP34E3I/ Relay trip type Long time CP3E3/ D CP32E3/ D CP33E3/ D CP34E3/ D With inertia delay device Medium time CP3E3M/ D CP32E3M/ D CP33E3M/ D CP34E3M/ D Short time CP3E3F/ D CP32E3F/ D CP33E3F/ D CP34E3F/ D Switch type CP3E4/30 CP32E4/30 CP33E4/30 CP34E4/30 Switch type CP3E4/30W CP32E4/30W CP33E4/30W CP34E4/30W With auxiliary switch Relay trip type CP3E5/30 CP32E5/30 CP33E5/30 CP34E5/30 (Shunt trip) Dual coil type Long time CP3E6/ CP32E6/ CP33E6/ CP34E6/ Medium time CP3E6M/ CP32E6M/ CP33E6M/ CP34E6M/ Short time CP3E6F/ CP32E6F/ CP33E6F/ CP34E6F/ Instantaneous CP3E6I/ CP32E6I/ CP33E6I/ CP34E6I/ Dual coil type Long time CP3E6/ D CP32E6/ D CP33E6/ D CP34E6/ D With inertia delay device Medium time CP3E6M/ D CP32E6M/ D CP33E6M/ D CP34E6M/ D Short time CP3E6F/ D CP32E6F/ D CP33E6F/ D CP34E6F/ D Notes: Enter the rated current in the mark of the type number. 0.05A: 0.05, A:, 0.25A: 0.25...30A: 30 When ordering types with auxiliary switch (W) or alarm switch (K), add suffix to type number. 08/24 Information subject to change without notice

CP3V, 32V, 33V, 34V Versions Internal circuit Operating CP3V (-pole) CP32V (2-pole) CP33V (3-pole) CP34V (4-pole) characteristics Type Type Type Type Series trip type Long time CP3V/ CP32V/ CP33V/ CP34V/ Medium time CP3VM/ CP32VM/ CP33VM/ CP34VM/ Short time CP3VF/ CP32VF/ CP33VF/ CP34VF/ Instantaneous CP3VI/ CP32VI/ CP33VI/ CP34VI/ Series trip type Long time CP3V/ D CP32V/ D CP33V/ D CP34V/ D With inertia delay device Medium time CP3VM/ D CP32VM/ D CP33VM/ D CP34VM/ D Short time CP3VF/ D CP32VF/ D CP33VF/ D CP34VF/ D Series trip type Long time CP3V/ W CP32V/ W CP33V/ W CP34V/ W With auxiliary switch Medium time CP3VM/ W CP32VM/ W CP33VM/ W CP34VM/ W Short time CP3VF/ W CP32VF/ W CP33VF/ W CP34VF/ W Instantaneous CP3VI/ W CP32VI/ W CP33VI/ W CP34VI/ W Series trip type Long time CP3V/ WD CP32V/ WD CP33V/ WD CP34V/ WD With auxiliary switch Medium time CP3VM/ WD CP32VM/ WD CP33VM/ WD CP34VM/ WD and inertia delay device Short time CP3VF/ WD CP32VF/ WD CP33VF/ WD CP34VF/ WD Series trip type Long time CP3V/ K CP32V/ K CP33V/ K CP34V/ K With alarm switch Medium time CP3VM/ K CP32VM/ K CP33VM/ K CP34VM/ K Short time CP3VF/ K CP32VF/ K CP33VF/ K CP34VF/ K Instantaneous CP3VI/ K CP32VI/ K CP33VI/ K CP34VI/ K Series trip type Long time CP3V/ KD CP32V/ KD CP33V/ KD CP34V/ KD With alarm switch Medium time CP3VM/ KD CP32VM/ KD CP33VM/ KD CP34VM/ KD and inertia delay device Short time CP3VF/ KD CP32VF/ KD CP33VF/ KD CP34VF/ KD Shunt trip type Long time CP3V2/ CP32V2/ CP33V2/ CP34V2/ Medium time CP3V2M/ CP32V2M/ CP33V2M/ CP34V2M/ Short time CP3V2F/ CP32V2F/ CP33V2F/ CP34V2F/ Instantaneous CP3V2I/ CP32V2I/ CP33V2I/ CP34V2I/ Shunt trip type Long time CP3V2/ D CP32V2/ D CP33V2/ D CP34V2/ D With inertia delay device Medium time CP3V2M/ D CP32V2M/ D CP33V2M/ D CP34V2M/ D Short time CP3V2F/ D CP32V2F/ D CP33V2F/ D CP34V2F/ D Switch type CP3V4/30 CP32V4/30 CP33V4/30 CP34V4/30 Switch type CP3V4/30W CP32V4/30W CP33V4/30W CP34V4/30W With auxiliary switch Notes: Enter the rated current in the mark of the type number. 0.05A: 0.05, A:, 0.25A: 0.25...30A: 30 When ordering types with auxiliary switch (W) or alarm switch (K), add suffix to type number. 08 Sockets (CP3 E only) No. of Circuit protector Auxiliary Alarm Socket Terminal cover poles Type contact contact Type Type -pole CP3E, 3E4 CP-S CP3E/ W, 3E4/ W NO CP-SA NC CP-SB CP3E/K NC CP-SA NO CS-SB 2-pole CP32E, 32E4 CP-S2 CP32E/W, 32E4/W SPDT CP-S2C CP32E/K SPDT CP-T3 AF9-566 Information subject to change without notice 08/25

CP3E, 32E, 33E, 34E CP3V, 32V, 33V, 34V Type number nomenclature CP3 E 2 M / W D DC N (AC 200V) Basic type CP3 E ( ), CP3 V (, IEC) Number of poles : -pole 3: 3-pole 2: 2-pole 4: 4-pole Internal circuit Blank: Series trip type 2: Shunt trip type 3: Relay trip type (Current trip) * 4: Switch type 5: Relay trip type (Shunt trip) * 6: Dual coil * * for CP3 E only Operating characteristics Blank: Long time delay M: Medium time delay F: Short time delay I: Instantaneous Rated current 0.05: 0.05A 2: 2A : A : A 2.5: 2.5A 5: 5A 0.25: 0.25A 3: 3A 20: 20A 0.5: 0.5A 5: 5A 25: 25A 0.75: 0.75A 7.5: 7.5A 30: 30A : A Rated tripping voltage (for CP3 E5 and CP3 E6 only) Relay trip type (shunt trip type) / CP3 E5 200V, 0V, 48V, 24V AC 50/60Hz or DC Dual coil type / CP3 E6 0V, 50V, 32V, 24V, 2V, 6V AC 50/60Hz or DC Blank: Tab terminal N: Screw terminal (series trip type and switch type) P: Printed board type (CP3 E only) Circuit voltage Blank: AC circuit DC: DC circuit Inertia delay device Blank: Without inertia delay device D: With inertia delay device (Except instantaneous type) Accessories Blank: Without accessories W: With standard auxiliary switch (For series and switch types) W: With auxiliary switch for low level circuit K: With standard alarm switch (For series type) K: With alarm switch for low level circuit Ordering information Specify the following:. Type number (Including rated tripping voltage) 08/26 Information subject to change without notice

CP3E, 32E, 33E, 34E CP3V, 32V, 33V, 34V Dimensions, mm Series trip and switch types Tab terminal CP3E, CP3E4 CP3V, CP3V4 -pole 2-pole 3-pole 4-pole 6 39 *2 * 7 9.5 53 42 3.3 8 max. 6 39 9.5 * *2 7 * With auxiliary switch (W), With alarm switch (K) : 6 *2 With auxiliary switch (W), With alarm switch (K) : 53 42 9 max. 26.5.5 3.3 9.5 42 8 max. M3 Depth 4 φ5 φ5 42 26.5 38.5 max. 9 M3 Depth 4 57.5 max. 9 φ5 9 φ5 9 76.5 max. 9 9 Screw terminal 53 8 max. 5 6 42 3.3 Panel drilling -pole 2-ø4 2-pole 4-ø4 3-pole 4-pole 4-ø4 4-ø4 Line side 42±0.2 26.5±0.2 ø6 ø6 ø6 R8 Load side 9±0.2 9±0.2 9±0.2 56.4±0.2 M4 8 Thickness: 0.8 Width: 6.3 Shunt trip type Socket for rail mounting (CP-E/Series trip and switch types) Tab terminal -pole 2-pole 29 6 28 (78) (32) 2 9 Main terminal M4 2 38 9 Relay trip type (CP-E only) Tab terminal C 2 NO 20 NC 30 C 2 NO 20 NC 30 77 84 93 08 Circuit protector 30 30 9 6 5 20 Mounting rail 35mm width IEC standard M3.5 2-M4 Mounting hole Terminal arrangement Common NO NC 5 5 5 5 Information subject to change without notice 08/27

CP3E, 32E, 33E, 34E CP3V, 32V, 33V, 34V Characteristic curves AC circuit Long time dealy (s) Medium time delay (M) Short time delay (F) 00 00 00 0 0 0 0.0 0.0 0.0 0 200 300 400 500 600 700 800 900 00 0 200 300 400 500 600 700 800 900 00 0 200 300 400 500 600 700 800 900 00 AC circuit Instantaneous (I) 00 DC circuit Long time delay 00 Medium time delay (M) 00 0 0 0 0.0 0.0 0.0 0 200 300 400 500 600 700 800 900 00 0 200 300 400 500 600 700 800 900 00 0 200 300 400 500 600 700 800 900 00 DC circuit Short time delay (F) Instantaneous (I) 00 00 0 0 Ambient temperature compensation 0.0 0 200 300 400 500 600 700 800 900 00 0.0 0 200 300 400 500 600 700 800 900 00 Scale factor of operating time (%) 300 200 0 80 60 40 Ref. temp.: 25 C - 0 20 25 30 40 50 60 Ambient temp. ( C) 08/28 Information subject to change without notice