PROJECTOR LIFTS CUSTOM E-CATALOG 2017 All Rights Reserved 800.238.7999 draperinc.com/av 1
PROJECTOR LIFT AEROLIFT MODELS 35, 100, 150 Aerolift in private residence, Universal projector mount above. Aesthetically designed, each model in the AeroLift series varies in vertical extension length, maximum lifting capacity, and features a stabilizing arm for cable management. Built-in adjustability provides for quick and easy response to job-site conditions. 110 or 220 Volt. The AeroLift 35 the first in the series provides a ceiling-recessed projector lift with a 35-pound (16 kg) maximum lifting capacity for areas that have space limitations. The AeroLift 100 the second in the series provides a ceiling-recessed projector lift with a 100-pound (45 kg) maximum lifting capacity for areas that have space limitations. The AeroLift 150 the largest in a series of three provides ceilingrecessed projector lifts with a 150-pound (68 kg) maximum lifting capacity in areas that have space limitations. Wall switch standard. WARRANTY: One year against defects Optional IR or RF remote control, or integrate into your control system. 35 Accessories, 35 Controls 35 only: Video Conferencing camera shelf and closure available. 100 Accessories 100 Controls 150 Accessories 150 Controls ALL LIFTS Environmental Airspace Housing to isolate projector from environmental airspace above ceiling. Ceiling closure panel available in white (standard) or black. Ceiling finish kit. Kit includes ceiling trim ring and closure panel. Universal-style bracket for projector attachment to lift. AeroLift 35 Maximum lifting capacity up to 35 lb (16 kg). Maximum extension 24.5" (62 cm). AeroLift 100 Maximum lifting capacity up to 100 lb (45 kg). Maximum extension 38.5" (98 cm). AeroLift 150 Maximum lifting capacity up to 150 lb (68 kg). Maximum extension 38.5" (98 cm). 2018 All Rights Reserved Form: Lift_Aerolift_18
PROJECTOR LIFT CREDENZA LIFT MODELS A, B Product: Credenza Lift. The Credenza Projector Lift conceals a projector in a credenza, cabinet, or table, and raises it into presentation position. When concealed, your projector is protected and out of sight. Models A and B are available to accommodate different projector sizes. 110 and 120 Volt. Two sizes available, Models A and B. Wall switch standard. WARRANTY: One year against defects US PATENTS: legal/patents/ Controls: IR or RF remote control, or integrate into your control system. Maximum lifting capacity up to 100 lb (45 kg). Maximum extension up to 12" (30 cm). 2018 All Rights Reserved Form: Lift_Credenza_18
PROJECTOR LIFT LCD LIFT MODELS A, B Product: LCD Lift A., Eisenhower High School, Blue Island, IL., Photography: Rich Sistos, Itasca, IL. The LCD Lift A, B positions the projector just below the ceiling line and features two models to accommodate different projector sizes. Model A is designed to accommodate smaller projector sizes. Model B is designed to accommodate larger projector sizes. 110 or 120 Volt. Two sizes available, models A and B. Positions projector directly below the ceiling. Includes Environmental Airspace Housing to isolate projector from environmental airspace above ceiling. Includes ceiling closure panel available with flat closure or bomb bay style doors. Installation of factory installed cables for video and projector control available. Wall switch standard. WARRANTY: One year against defects A or B Controls: IR or RF remote control, or integrate into your control system. A or B Accessories: Ceiling Access Door, Universal projector mount. Universal-style bracket for easy attachment of a variety of projector models. Model A Maximum lifting capacity up to 65 lb (29 kg). Model B Maximum lifting capacity up to 65 lb (29 kg). Accomodates larger projectors. 2018 All Rights Reserved Form: Lift_LCD_18
PROJECTOR LIFT MICRO PROJECTOR LIFT Products: MPL and Access V Screen., Private residence, Greensboro, GA., Photography: Joseph Hilliard Elkhart, IN. The Micro Projector Lift utilizes an exclusive three-scissor design to provide lateral and front-to-back stability for the projector. It features a maximum 35-pound lifting capacity with extension positions for show and service to provide ease-of-access for projector maintenance. It requires only a minimal amount of overhead ceiling space for installation. 110 or 220 Volt. Can be installed in existing 2 x 2 (61 cm x 61 cm) ceiling grid. Installation of factory installed cables for video and projector control available. Wall switch standard. WARRANTY: One year against defects US PATENTS: legal/patents/ Controls: optional IR or RF remote control, or integrate into your control system. Accessories: Environmental Airspace Housing to isolate projector from environmental airspace above ceiling. Ceiling closure panel available in white (standard) or black. Ceiling finish kit. Kit includes ceiling trim ring and closure panel. Universal-style bracket for projector attachment to lift. Maximum lifting capacity up to 35 lb (16 kg). Maximum extension up to 48 (122 cm). 2018 All Rights Reserved Form: Lift_Micro_18
PROJECTOR LIFT ORBITER LIFT MODELS A, B CAN BE INSTALLED IN AN AGLED CEILING OR WALL Product: Orbiter., Simon Properties Group, Indianapolis, IN.: The Orbiter Models A and B Lift features a unique lift design that provides an impressive entrance as it quietly rotates the projector into presentation position. Ideal for small ceiling spaces, it can also be installed in an angled ceiling or wall. Model A is designed to accommodate smaller projector sizes. Model B is designed to accommodate larger projector sizes. 110 and 120 Volts. Two sizes available, models A and B. Lift positions projector directly below ceiling. Includes ceiling closure panel in white. Includes universal-style bracket for easy attachment of a variety of projector models. Wall switch standard. Lift finish is black. WARRANTY: One year against defects Controls: IR or RF remote control, or integrate into your control system. Accessories: Angled Ceiling adaptor, ceiling access door(s). Environmental Airspace Housing to isolate projector from environmental airspace above ceiling. Maximum lifting capacity up to 26 lb (12 kg). Model B accomodates larger projectors. 2018 All Rights Reserved Form: Lift_Orbiter_18
PROJECTOR LIFT PHANTOM LIFT MODELS A, B CAN ALSO BE TABLE MOUNTED Product: Phantom projector Lift Celing mount. Right, shows table mount. The Phantom Models A and B lift pivots the projector into presentation position. The projector can be easily aligned during installation to provide a direct light path onto your Draper projection screen. Model A is designed to accommodate smaller projector sizes. Model B is designed to accommodate larger projector sizes. 110 and 120 Volt. Two sizes available, models A and B. Lift positions projector directly below the ceiling. Includes ceiling closure panel in white. Includes universal-style bracket for easy attachment of a variety of projector models. Wall switch standard. WARRANTY: One year against defects Controls: IR or RF remote control, or integrate into your control system. Accessories: Celing access door(s). Environmental Airspace Housing to isolate projector from environmental airspace above ceiling. Maximum lifting capacity up to 26 lb (12 kg). Model B accomodates larger projectors. 2018 All Rights Reserved Form: Lift_Phantom_18
PROJECTOR LIFT REVELATION LIFT MODELS A, B Product: Revelation Projector Lift and Access V Screen., Navel Base at Gulfport, MS., Photography: Jim Bramblett. The Revelation Model A and B conceals the projector and noise above the ceiling, providing a quiet presentation. This unique lift hides the projector and utilizes two mirrors that reflect the image onto the screen. The only visible element is a hinged door in the ceiling. Model A is designed to accommodate smaller projector sizes. Model B is designed to accommodate larger projector sizes. 110 and 120 Volt. Two sizes available, models A and B. Replicates positioning of projector right below ceiling line. Can be installed to match a 2' x 2' (61 cm x 61 cm) ceiling grid. Wall switch standard. WARRANTY: One year against defects A or B Controls: IR or RF remote control, or integrate into your control system. A or B Accessories: Glass shield, Microclear cleaning kit, Ceiling access door. Model A Maximum lifting capacity up to 65 lb (29 kg). Model B Maximum lifting capacity up to 65 lb (29 kg). Accomodates larger projectors. 2018 All Rights Reserved Form: Lift_Revelation_18
PROJECTOR LIFT SCISSOR LIFT SLX Scissor Lift SLX The Scissor Lift SLX features three sets of scissors that provide lateral and front-to-back projector stability with a 350-pound (158 kg) lifting capacity that makes it an ideal option for heavier projector applications. The SLX offers longer extension positions for show and service to provide ease of access for projector maintenance. Available with models that vary in maximum lifting capacity and extension to service positions. 110 or 220 Volt. Six models available. Installation of factory installed cables for video and projector control available. Lift finish available in white (standard) or black. WARRANTY: One year against defects US PATENTS: legal/patents/ Controls: Optional IR or RF. Accessories Environmental Airspace Housing to isolate projector from environmental airspace above ceiling. Ceiling closure panel available in white (standard) or black. Ceiling finish kit. Kit includes ceiling trim ring and closure panel (order when Airspace Housing is not required). Optional universal-style bracket for easy attachment of a variety of projector models. For use with projectors under 26 lb (12 kg). Maximum lifting capacity up to 350 lb (158 kg). Six models available: Maximum extension of models: 10' (305 cm) 14' (427 cm) 17' (518 cm) 21' (640 cm) 24' (732 cm) 28' (853 cm) extension capacity. 2018 All Rights Reserved Form: Lift_ScissorSLX_18
PROJECTOR LIFT SCISSOR LIFT SL Wheelersburg Schools K-12, Wheelersburg, OH., Dealer/Installer: A1 Products, Inc. Sellersburg, IN., Photography: Javier Jarrin, OMS Photography, Cincinnati, OH.. Designed for demanding projector applications, the Scissor Lift SL features three sets of scissors to provide lateral and front-to-back projector stability with a maximum 100-pound (45 kg) lifting capacity. The SL offers extension positions for show and service that provide ease of access for projector maintenance. Available with models that vary in maximum lifting capacity and extension to service positions. 110 or 220 Volt. Five models available. Smaller projectors can fit within 2 x 2 (61 cm x 61 cm) ceiling grid. Installation of factory installed cables for video and projector control available. Wall switch and service key switch, standard. Lift finish available in white (standard) or black. WARRANTY: One year against defects US PATENTS: legal/patents/ Controls: Optional IR or RF. Accessories Environmental Airspace Housing to isolate projector from environmental airspace above ceiling. Ceiling closure panel available in white (standard) or black. Ceiling finish kit. Kit includes ceiling trim ring and closure panel (order when Airspace Housing is not required). Universal-style bracket for projector attachment to lift. For use with projectors under 26 lb (12 kg). Maximum lifting capacity up to 100 lb (45 kg). Five models available: Maximum extensions of models: 4' (122 cm), 6' (183 cm), 8' (244 cm), 10' (305 cm ) 12' (366 cm) extension capacity. For larger sizes see Scissor Lift SLX. 2018 All Rights Reserved Form: Lift_ScissorSL_18
SCREEN LIFT SCREEN BOOM STORES SCREEN AGAINST WALL, SWINGS OUT WHEN IN USE Screen Boom and Premier Screen., Camp Hill UMC, Camp Hill, PA., Photography: Sandii Laing Peiffer, Camp Hill, PA. The new and unique Screen Boom solves an old problem and allows the installation of a motorized screen in new settings. The screen is mounted on a motorized operable arm. The whole system can be stored, with the screen retracted, nearly flat against a wall. Operate the Screen Boom first to swing the screen out into the room, any distance up to 90 degrees, then lower the screen for use. Perfect for use under high vaulted ceiling, in gymnasiums, and other settings where typical ceiling or wall installation is impractical or won't meet the viewer s needs. The operable arm is 198 ¹/8" long and 2 1/2" O.D. May be cut in the field to a shorter length if needed. A plastic cap finishes the cut end of the arm. Screen Boom accommodates Targa and Premier in sizes through 160" (406 cm) wide (image area). Includes all hardware for mounting the screen to the operable arm. Includes one SS-1R operating switch. The stored position may be either in front or behind the viewing position. Available with black or white finish WARRANTY: One year against defects Optional controls available. Operable arm length is 198 ¹/8" long and 2 1/2" O.D. May be cut in the field to a shorter length if needed. Overall finish size dependant on screen size. VIDEO Screen Boom in action. https://www.youtube.com/ watch?v=xsg2qbxejjc&feature=youtu. be&list=uux6witql2diazoysre1eddq 2018 All Rights Reserved Form: Lift_ScreenBoom_18
CAMERA MOUNT VIDEO CONFERENCING CAMERA CREDENZA TABLE MOUNTED, RECESSED : The Video Conferencing Camera Lift - Credenza conceals a camera in a credenza, cabinet, or table. This lift installs in virtually any conference room furniture. The lift raises the camera into position when it s time for a video conference. When concealed, your video conferencing camera is protected and out of sight. Models A and B are available to accommodate different projector sizes. Available in two sizes to accommodate almost any video conferencing camera. Wall switch standard, optional IR or RF remote control, or integrate into your control system. WARRANTY: One year against defects 110 or 220 Volts. Optional Controls. Maximum lifting capacity up to 100 lb (45 kg). Maximum extension up to 12 (30 cm). 2018 All Rights Reserved Form: CM_VCCLCredenza_18
CAMERA MOUNT VIDEO CONFERENCING CAMERA LIFT CEILING RECESSED CASE, LOWERED WHEN IN USE VCCL and adapter bracket The Video Conferencing Camera Lift Ceiling is designed to provide complete concealment of the conferencing camera in a ceilingrecessed case. The compact case installs directly behind the screen case and features motorized door closures. The camera can be lowered up to 10 feet below the ceiling and remain centered for more precise camera positioning. It accommodates larger camera sizes and provides more flexibility during installation due to the ability to adjust the lowering position. Accommodates cameras up to 14 wide x 8" high x 9 deep (36 cm x 20 cm x 23 cm). Travel range anywhere from 0 to 120 (0 cm to 305 cm) with infinite adjustability. Includes single station wall switch. WARRANTY: One year against defects Control options available. Accessories/related products include: Adapter bracket, Video Conferencing camera box. 110 or 220 Volt. Case dimensions are 15-¹/8 high x 12-15/16" deep x 77" minimum length ( 38 cm x 33 cm x 196 cm). Maximum lifting capacity 15 lb (7 kg). 2018 All Rights Reserved Form: CM_VCCL_18
CAMERA MOUNT VIDEO CONFERENCING CAMERA BOX WALL RECESSED Draper s Video Conferencing Camera Box recesses a camera in the wall, behind a hinged tempered glass door to keep your camera out of view and protected. It makes installing a video conferencing camera quick and easy. Installer simply cuts the desired opening in the wall, inserts the five-sided steel enclosure and engages the "quick clamps". No additional hardware or brackets are required. There s no finishing either: the box has a bezel that trims the rough opening. All visible surfaces are finished with black powder coat for a sleek modern look. Five convenient cable exits make wire management simple. Suitable for use with thin panels or gypsum board wall openings. Includes lock to protect sensitive equipment. Two keys provided. Precision formed and punched from 16-gauge, cold-rolled steel. Finished inside and out with durable black powder coat. Front of enclosure features a finishing frame bezel that is self-trimming. Enclosure features five "knock out" wire management locations for cabling options. Enclosure will mount in any opening. Built-in "quick clamps" can clamp to most walls or panels. Glass door is hinged to fold down for easy access. Includes lock and keys WARRANTY: One year against defects Size is 10 11/16" H x 14 5/16" W x 11" D (27cm W x 36cm H x 28cm D). 110 and 220 Volts. 2018 All Rights Reserved Form: CM_VCCBox_18
SCREEN LIFT CUSTOM LIFT CUSTOM INSTALLED, UNIQUE SOLUTION Custom Monitor lift, Chile Banco left, other custom work above. Do your customers ever ask for help concealing their AV equipment? Do they ask for mechanisms you've never seen before? Now Draper can help. Draper is pleased to announce our new Custom Lifts. These lifts are not based on standard lift products, but rather are custom designed to fit any need. Whether you want to conceal a single videoconferencing camera or you want 20 flat panel displays to move in concert, Draper's Custom Lifts can help. You provide the inspiration, and we will design a customized lifting system to fit your need. LOCATION Recipient of the CustomRetailer Magazine EXC!TE Award. These awards go to the best products available in the industry for being innovative, highperforming and solutions-oriented for the custom installation professional. WARRANTY: One year against defects Walls Ceilings Floors Tables CONCEAL MOVE ITEM Projectors Flat panel displays Videoconferencing cameras Speakers Microphones Computer monitors and keyboards Document cameras Controls, touch panels and remotes CALL FOR CUSTOM LIFTS. Credenzas Cabinets Furniture If you have a requirement not easily addressed by Draper's or other manufacturers' standard lift products, give us a call. We'll consider anything. LOCATION RF Remote IR Remote Lift up Pull out Swivel Turn Touch pad Wall Switch Drop Down Swing down Pivot Rotate 2018 All Rights Reserved Form: Lift_Custom_18