mm Pitch Miniature Connector A A Series Features 1. Miniature Type and High Density Mounting These connectors are designed in a miniature and light weight product, and mounted in the high density. The crimping case is structured in the mm pitch grid, so that connectors can be arranged for use.. Variation in Number of Contacts In addition to the dip type, SMT and crimping types are available with broad variations.. Stacking Variation Product Specifications When the connector is used for board to board, set mm between boards in conjunction with the pin header AB, or 5.1mm between boards in conjunction with the pin header AC. Rating Current rating 1A Voltage rating 00V AC Operating Temperature Range Operating Moisture Range 55 to +5ç (Note 1) 0 to 0% Storage Temperature Range Storage Humidity Range to +0ç (Note ) 0 to 70% (Note ) Item Specification Condition 1. Insulation Resistance. Withstanding voltage. Contact Resistance. Vibration 5. Humidity (Steady state) 00M ohms min. No flashover or insulation breakdown. 15m ohms max No electrical discontinuity of µs or more Insulation resistance: 00M ohms min. 500V DC 50V AC/1 minute 0.1A Frequency: to 55 Hz, single amplitude of 0.75 mm, hours in each of the directions. 9 hours at temperature of 0ç and humidity of 90% to 95%. Humidity resistance ( 5ç: 0 minutes 15 to 5ç: 5 minutes max. No damage, cracks, or parts looseness. (Steady state) (15ç: 0 minutes 15 to 5ç: 5 minutes max.) 5 cycles 7. Operating Life Contact resistance: 0m ohms max. 0 cycles. Resistance to Flow: 0ç for seconds No deformation of components affecting performance. Soldering heat Manual soldering: 00ç for seconds Note 1: Includes temperature rise caused by current flow. Note : The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and Humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation. Applications VTR, vehicle telephones, and other various kinds of electronic equipment Material Insulator Contact Part Pin header (Through hole) Receptacle (Through hole) Pin header (SMT) Receptacle (SMT) Crimping socket Pin header Receptacle Crimping contact Material Finish Remarks Polyamid PBT PPS PBT Brass Black Light brown Black UL9V-0 Phosphor bronze Selective gold plated --- C
Ordering Information Pin Header (DIP type) A B - 1 P - DS 1 5 1 5 Series Name: A Series No.: B : double row B : single row C : double row (low profile product) Number of contacts: Double row...,,,, 1, 1, 1, 1, 0,,,,, 0,,, 0, 50 ( and 50 contacts correspond to the right angle type only. Straight angle type corresponds to the AC type.) Single row...,,, 5,, 7,, 9,, 11, 1, 1, 1, 15, 1 P, PA: Pin header Contact pitch : mm Contact type DS : Right angle type DSA : Straight type Receptacle (DIP type) A - D - DS 1 5 1 5 Series Name: A Series No.: : double row C : double row D : double row (for FFC, FFC) (Note) Number of contacts: :, 50 C, D :,,,, 1, 1, 1, 1, 0,,,, 50 DA: Receptacle Contact pitch : mm Contact type DS: Right angle type DSA: Straight type (lead length: mm) DSC: Straight type (lead length: mm) DSE: Straight type (lead length: 1.7mm) Crimping Socket A B - D - C 1 5 1 5 Series Name: A Series No.: B : double row B : single row Number of contacts: Double row...,,,, 1, 1, 1, 0,,,, Single row...,,, 5,, 7,, 9,, 1, 15, 1, 1 Contact alignment: D : double row S : single row Contact pitch : mm Connection type: C : crimping C11
Crimping Contact A B - 0 SCFC 1 1 Series Name: A Series No.: B Applicable cable size 0: AWG# to AWG#0 : AWG# to AWG# Packaging type SCFC: Reel SCC: Bag Pin Header (SMT type) A A - P A - SV 1 5 7 1 5 7 Series Name: A Series No.: Positioning Boss:A : With boss No symbol : Without boss Number of contacts:,,,, 1, 1, 1, 1, 0,,, 0,,, 0, 50 P: Pin header A: Selective gold plating Contact pitch : mm Contact type SV: Board virtical type Receptacle (SMT type) A A - D A - SV 1 5 7 1 5 7 Series Name: A Series No.: Positioning Boss: A : With boss No symbol : Without boss Number of contacts:,,,, 1, 1, 1, 1, 0,,, 0, D: Receptacle A: Selective gold plating Contact pitch : mm Contact type: SV: Virtical type C1
Pin Header AB Straight Type AB-0PA-DSA AB-0PA-DSA AB-0PA-DSA AB-PA-DSA AB-1PA-DSA AB-1PA-DSA AB-1PA-DSA AB-1PA-DSA AB-0PA-DSA AB-PA-DSA AB-PA-DSA AB-PA-DSA AB-PA-DSA AB-0PA-DSA AB-PA-DSA 1-001-1 1-00- 1-00-7 1-00-0 1-005- 1-00-5 1-007- 1-00-0 1-009- 1-0- 1-011-5 1-01- 1-01-0 1-01- 1-015- 1 1 1 1 0 0 Note: Please, order the product per 0 pcs. 0.0 0.0 1.0 1.0 0.0.0.0.0.0.0 0.0 0.0 0.0 1.0 1.0 0.0.0.0.0.0 ±0.05 B±0.1 ±0.05 Ø0. +0.1 _1 AB Right Angle Type AB-0PA-DS AB-0PA-DS AB-0PA-DS AB-PA-DS AB-1PA-DS AB-1PA-DS AB-1PA-DS AB-1PA-DS AB-0PA-DS AB-PA-DS AB-PA-DS AB-PA-DS AB-PA-DS AB-0PA-DS AB-PA-DS AB-PA-DS AB-50PA-DS 1-051-5 1-05- 1-05-0 1-05- 1-055- 1-05-9 1-057-1 1-05- 1-059-7 1-00- 1-01-9 1-0-1 1-0- 1-0-7 1-05-0 1-077-9 1-0-1 1 1 1 1 0 0 50 0.0 0.0 1.0 1.0 0.0.0.0.0.0.0.0 50.0 0.0 0.0 0.0 1.0 1.0 0.0.0.0.0.0.0.0 Kink Positions 1 or alternately alternately or alternately alternately or alternately alternately or 5 alternately 5 alternately 5 or alternately alternately or 7 alternately 7 alternately 7 or alternately alternately 11 alternately 1 or 1 alternately B±0.1 ±0.05 Note 1. Please order the product per 0 pcs. Note. Diameter of or more contacts is Ø0.95±0.0. ±0.05 Note Ø0.9±0.0 C1
AB Straight Type AB-0PA-DSA AB-0PA-DSA AB-0PA-DSA AB-05PA-DSA AB-0PA-DSA AB-07PA-DSA AB-0PA-DSA AB-09PA-DSA AB-PA-DSA AB-1PA-DSA AB-1PA-DSA AB-1PA-DSA AB-15PA-DSA AB-1PA-DSA -001- -00-0 -00- -00- -005-9 -00-1 -007- -00-7 -009-0 -011-1 -01- -01-7 -01-0 -015- Note: Please order the product per 0 pcs. 5 7 9 1 1 1 15 1 0.0 0.0 1.0 1.0 0.0.0.0.0.0 0.0 0.0 0.0 1.0 1.0.0.0.0.0 B±0.1 ±0.05 Ø0. +0.1 0 AB Right Angle Type AB-0PA-DS AB-0PA-DS AB-0PA-DS AB-05PA-DS AB-0PA-DS AB-07PA-DS AB-0PA-DS AB-09PA-DS AB-PA-DS AB-11PA-DS AB-1PA-DS AB-1PA-DS AB-1PA-DS AB-15PA-DS AB-1PA-DS -051-1 -05- -05-7 -05-0 -055- -05-5 -057- -05-0 -059- -00- -01-5 -0- -0-0 -0- -05-5 7 9 11 1 1 1 15 1 0.0 0.0 1.0 1.0 0.0.0.0.0.0.0 0.0 0.0 0.0 1.0 1.0 0.0.0.0.0.0 Note 1. Please order the product per 0 pcs. Kink Positions 1 or alternately alternately or alternately alternately or alternately alternately or 5 alternately 5 alternately 5 or alternately alternately or 7 alternately 7 alternately 7 or alternately alternately B±0.1 ±0.05 Note Ø0.9±0.0 C1
Pin Header Note: Please order the product per 0 pcs. AC-0P-DSA AC-0P-DSA AC-0P-DSA AC-0P-DSA AC-P-DSA AC-1P-DSA AC-1P-DSA AC-1P-DSA AC-1P-DSA AC-0P-DSA AC-P-DSA AC-P-DSA AC-P-DSA AC-P-DSA AC-P-DSA AC-P-DSA AC-P-DSA AC-50P-DSA 1-001-0 1-00- 1-00- 1-00-9 1-005-1 1-00- 1-007-7 1-00-0 1-009- 1-0-1 1-011- 1-01-7 1-01-0 1-01- 1-015-5 1-0-0 1-05-9 1-0-7 Unit: mm 0.0 ---- 0.0 0.0 0.0 0.0 0.0 1 1 1.0 1 1.0 1.0 1 1.0 0 0.0.0 0.0.0.0.0.0.0.0.0.0.0.0.0 50 50.0.0 C15
Receptacle A Right Angle Type A-DA-DS 1-0711-9 A-50DA-DS 1-071-7 Note: Please order the product per 0 pcs. A 50 Unit: mm B C1
Receptacle KAC Type Unit: mm C C AC-0DA-DSA AC-0DA-DSC AC-0DA-DSA AC-0DA-DSC AC-0DA-DSA AC-0DA-DSC AC-DA-DSA AC-DA-DSC AC-1DA-DSA AC-1DA-DSC AC-1DA-DSA AC-1DA-DSC AC-1DA-DSA AC-1DA-DSC AC-1DA-DSA AC-1DA-DSC 1-0501- 1-051-7 1-050-9 1-05-0 1-050-1 1-05- 1-050- 1-05-5 1-0505-7 1-055- 1-050-0 1-05-0 1-0507- 1-057- 1-050-5 1-05- 1 1 1 1 0.0 0.0 1.0 1.0 0.0 0.0 0.0 1.0 1.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0 AC-0DA-DSA AC-0DA-DSC AC-DA-DSA AC-DA-DSC AC-DA-DSE AC-DA-DSA AC-DA-DSC AC-DA-DSA AC-DA-DSC AC-DA-DSE AC-50DA-DSA AC-50DA-DSC AC-50DA-DSE 1-0509- 1-059-9 1-0511-0 1-051-0 1-0571-1 1-051-5 1-05- 1-0515-0 1-055-1 1-0575- 1-05-1 1-055- 1-05- 0 50 0.0.0.0.0 50.0.0.0.0.00.00.00.00 1.7.00.00.00.00 1.7.00.00 1.7 C17
AD Type AD-0DA-DSE AD-0DA-DSE AD-0DA-DSE AD-DA-DSE AD-1DA-DSE AD-1DA-DSE AD-1DA-DSE AD-1DA-DSE AD-0DA-DSE AD-DA-DSE AD-DA-DSE 1-0751- 1-075- 1-075-9 1-075-1 1-0755- 1-075-7 1-0757-0 1-075- 1-0759-5 1-07- 1-07-0 Unit: mm 0.0 0.0 0.0 0.0 0.0 1 1 1.0 1 1.0 1.0 1 1.0 0 0.0.0.0.0.0 C1
Crimping Socket AB-*D-C AB-0D-C AB-0D-C AB-0D-C AB-D-C AB-1D-C AB-1D-C AB-1D-C AB-0D-C AB-D-C AB-D-C AB-D-C 1-005- 1-00-0 1-007- 1-00- 1-009-9 1-0- 1-011-0 1-01- 1-01- 1-01-9 1-00-5 1 1 1 0 0.0 0.0 1.0 0.0.0.0.0 0.0 0.0 0.0 1.0.0.0.0 Note 1. * indicates the number of contacts. Note. Please order the product per 0 pcs. Note. Use other contacts in combination. (Example: 50 contacts = contacts + contacts) AB-*S-C AB-0S-C AB-0S-C AB-0S-C AB-05S-C AB-0S-C AB-0S-C AB-S-C AB-1S-C AB-15S-C AB-1S-C AB-1S-C -001- -00- -00-9 -00-1 -005- -00-7 -007-0 -00- -011-7 -0- -009-5 5 1 15 1 1 0.0 0.0 1.0 0.0.0.0.0 0.0 0.0 0.0 1.0.0.0.0 Note 1. * indicates the number of contacts. Note. Please, order the product per 0 pcs. C19
Crimping Contact SCC contact SCFC contact Note 1. The plating specification is shown as follows: (Contact area) : Gold plating (Others): Nickel plating Note. "0" is stamped on AB-0SCFC(SCC), and "" is stamped on AB-SCFC(SCC). AB-0SCFC AB-0SCC AB-SCFC Applicable Cable Type Quantity Crimping Tool 1-001-7 1-00-0 1-00- AWG# to #0 AWG# to #0 AWG# to # Reel Bag Reel 000 0 000 Automatic crimper CM-5-AP 5-AB-0 AB-TA0HC Automatic crimper CM-5-AP 5-AB- BCrimping Tool Manual crimping tool AB-TA0HC Automatic crimping machine CM-5 Specification (CM-5 type) Features This tool is a new model to meet many user needs, and finely designed to enhance operativity and expand the application range for setup adjustment and various applicator installations. The easy to handle semi-automatic crimping machine can be used for crimping connection of various strip contacts. Power supply Gross weight Machining range Remarks Specification 0V AC, single phase 00W 75kg 000 to 000 contacts/hour Crimping of various contacts by replacing the applicator Type Item Applicable Contact Applicable Cable Manual Manual crimping tool AB-TA0HC 550-000-7 AB-0SCC AWG# to #0 Automatic crimping machine CM-5 901-0005- --- --- Automatic Applicator AP5-AB-0S AP5-AB-S 901-01- 901-017-5 AB-0SCFC AB-SCFC AWG# to #0 AWG# to # C0
BShort Pin Please, order the product per 00 pcs. Material Finish A-SP(A) 1-0- Housing Contact PBT Phosphor bronze Black (UL9V-0) Selective gold plating B Polarizing Key A-GPIN(A) Note: This product is provided in a set of pieces in conjunction with a runner. The unit for sale consists of sets, which are included in one pack. Material A-GPIN(A) 1-017- Poly acetal (white) C1
Pin Header PCB mounting pattern for pos. AA-0PA-SV AA-0PA-SV AA-0PA-SV AA-0PA-SV AA-0PA-SV AA-0PA-SV AA-PA-SV AA-PA-SV AA-1PA-SV AA-1PA-SV AA-1PA-SV AA-1PA-SV AA-1PA-SV AA-1PA-SV AA-0PA-SV AA-0PA-SV AA-PA-SV AA-PA-SV AA-PA-SV AA-PA-SV AA-PA-SV AA-PA-SV AA-PA-SV AA-PA-SV AA-50PA-SV AA-50PA-SV 1-00- 1-0-0 1-01-9 1-1- 1-0-1 1-- 1-0- 1--9 1-0-7 1--1 1-05-0 1-5- 1-0- 1--7 1-0- 1-- 1--0 1-50- 1-1-5 1-5-0 1-1-0 1-5-5 1-15- 1-55- 1-1- 1-5-0 Unit: mm C 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 1 1 1.0 1 1.0 1.0 0 0.0 1.0.0.0 0.0.0.0.0.0.0.0.0 0.0 50 50.0.0.0 C
Receptacle PCB mounting pattern for pos. AA-0DA-SV AA-0DA-SV AA-0DA-SV AA-0DA-SV AA-0DA-SV AA-0DA-SV AA-DA-SV AA-DA-SV AA-1DA-SV AA-1DA-SV AA-1DA-SV AA-1DA-SV AA-1DA-SV AA-1DA-SV AA-0DA-SV AA-0DA-SV AA-DA-SV AA-DA-SV AA-DA-SV AA-DA-SV AA-DA-SV AA-DA-SV 1-10-0 1-1-5 1-11- 1-111- 1-1- 1-11-0 1-1-9 1-11- 1-1-1 1-11- 1-15- 1-115-9 1-1-7 1-11-1 1-1- 1-11-7 1-11- 1-1150-9 1-111-0 1-115- 1-111-5 1-115-0 Unit: mm C 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 1 1 1.0 1 1.0 1.0 0 0.0 1.0.0.0 0.0.0.0.0.0.0 C
BRecommended Temperature Profile 50 MAX 0ç(5sec.Max.) 0ç 00 00ç Temperature (ç) 150 0 150ç Applicable Reflow method : IR reflow Solder : Paste type Sn/7 Pb (Flux content 9%/wt) Test board : Glass epoxy 5 0 1.mm Metal mask thichness : 0.mm 50 0 Start 5ç (0sec.) 0sec. Preheating 0 (0sec.) Soldering Recommended temperature profile The temperature may be slightly changed according to the solder paste type and amount. Time (Secounds) BFunctional Block Chart Receptacle and Socket Side A (A)-*DA-SV Straight SMT Type Pin Header Side A (A)-*PA-SV Straight SMT Type A (A)-*DA-DSA(DSC, DSE) Straight Through hole Type AC-*P-DSA Straight Through hole (low profile) Type AB-*D-C Cable crimping type AB-*PA-DSA Straight Through hole Type AB-*PA-DS Right Angle Through hole Type C
BApplication Pattern (A series) A(A)-*DA-SV AC-*DA-DSA AB-*D-C A(A)-*PA-SV AC-*DA-DSA A(A)-*PA-SV AB-*D-C A(A)-*PA-SV A(A)-*DA-SV AC-*P-DSA A(A)-*DA-SV AC-*P-DSA AC-*DA-DSA AC-*P-DSA AB-*D-C AB-*PA-DSA A(A)-*DA-SV AB-*PA-DSA AC-*DA-DSA AB-*PA-DSA AB-*D-C AB-*PA-DS AB-*PA-DS AB-*PA-DS Note.When the connector is mounted on the board surface, the mounting height is a size designed in single connector. Solder paste used for installation will slightly change according to solder thickness. C5