FORM H REGISTRATION OF ENGINEERS ACT 1967 (REVISED 2015) APPLICATION FOR RENEWAL OF REGISTRATION FOR YEAR.... Regulation 20 of the Registration of Engineers Regulations 1990 (Revised 2015) A. APPLICATION FOR RENEWAL OF REGISTRATION FOR: Professional Engineer (Renewal fee RM200.00 and RM100.00 for age 60 years old) Professional Engineer with Practicing Certificate (Renewal fee RM400.00) Inspector of Works (Renewal fee RM30.00 for every 3-year) Accredited Checkers (Renewal fee RM 200.00 and RM100.00 for age 60 years old) B. APPLICANT DETAIL (to be completed by the applicant in BLOCK LETTERS): 1. Name:... 2. MyKad (Malaysian) / Identity Card No. (Foreign): Nationality:... 3. BEM Registration No.: 4. Address (if any change): Choose only one. If you are registered in both category, PEPC & Accredited Checker, separate FORM H is required for each category. 5. Tel. No.:... Mobile Phone No.:... 6. Email :.. Fax No.: C. PAYMENT DETAILS: Payable to LEMBAGA JURUTERA MALAYSIA. Payment details: Bank draft/cheque No.:... Malaysia Money Order/Postal Order No.:. Payment online via bank amount.. on.. Others (please specify):... D. DECLARATION: (choose either one) I declare that I, a) b) Not a bankrupt E. CPD RECORD for the last three years: Residing in Malaysia for NOT less than 6-month prior to date of renewal. A bankrupt CPD Record is not applicable for Accredited Checker Residing in Malaysia for less than 6- month prior to date of renewal. Years Total CPD CPD hours I hereby declare that the information and particulars provided by me in this form is true and correct. (signature of applicant) NOTE: Please ( ) where applicable. (date)
FORM H REGISTRATION OF ENGINEERS ACT 1967 (REVISED 2015) APPLICATION FOR RENEWAL OF REGISTRATION FOR YEAR.... Regulation 20 of the Registration of Engineers Regulations 1990 (Revised 2015) A. APPLICATION FOR RENEWAL OF REGISTRATION FOR: Professional Engineer (Renewal fee RM200.00 and RM100.00 for age 60 years old) Professional Engineer with Practicing Certificate (Renewal fee RM400.00) Inspector of Works (Renewal fee RM30.00 for every 3-year) Accredited Checkers (Renewal fee RM 200.00 and RM100.00 for age 60 years old) B. APPLICANT DETAIL (to be completed by the applicant in BLOCK LETTERS): 1. Name:... 2. MyKad (Malaysian) / Identity Card No. (Foreign): Nationality:... 3. BEM Registration No.: 4. Address (if any change): 5. Tel. No.:... Mobile Phone No.:... 6. Email :.. Fax No.: C. PAYMENT DETAILS: Payable to LEMBAGA JURUTERA MALAYSIA. Payment details: Bank draft/cheque No.:... Malaysia Money Order/Postal Order Payment online via bank To be filled by the applicant either PE, PEPC, AC or IOW amount.. on.. Others (please specify): No.:.... D. DECLARATION: (choose either one) I declare that I, a) Not a bankrupt A bankrupt b) Residing in Malaysia for NOT less than 6-month prior to date of renewal. Residing in Malaysia for less than 6- month prior to date of renewal. E. CPD RECORD for the last three years: Years Total CPD CPD hours I hereby declare that the information and particulars provided by me in this form is true and correct. (signature of applicant) NOTE: Please ( ) where applicable. (date)
FORM H REGISTRATION OF ENGINEERS ACT 1967 (REVISED 2015) APPLICATION FOR RENEWAL OF REGISTRATION FOR YEAR.... Regulation 20 of the Registration of Engineers Regulations 1990 (Revised 2015) A. APPLICATION FOR RENEWAL OF REGISTRATION FOR: Professional Engineer (Renewal fee RM200.00 and RM100.00 for age 60 years old) Professional Engineer with Practicing Certificate (Renewal fee RM400.00) Inspector of Works (Renewal fee RM30.00 for every 3-year) Accredited Checkers (Renewal fee RM 200.00 and RM100.00 for age 60 years old) B. APPLICANT DETAIL (to be completed by the applicant in BLOCK LETTERS): 1. Name:... 2. MyKad (Malaysian) / Identity Card No. (Foreign): Nationality:... 3. BEM Registration No.: 4. Address (if any change): 5. Tel. No.:... Mobile Phone No.:... 6. Email :.. Fax No.: C. PAYMENT DETAILS: Payable to LEMBAGA JURUTERA MALAYSIA. Payment details: Bank draft/cheque No.:... Malaysia Money Order/Postal Order No.:. Payment online via bank amount.. on.. Others (please specify):... D. DECLARATION: (choose either one) I declare that I, a) Not a bankrupt A bankrupt b) E. CPD RECORD for the last three years: Years CPD hours Residing in Malaysia for NOT less than 6-month prior to date of renewal. Choose only one with payment detail I hereby declare that the information and particulars provided by me in this form is true and correct. Residing in Malaysia for less than 6- month prior to date of renewal. Total CPD (signature of applicant) NOTE: Please ( ) where applicable. (date)
FORM H REGISTRATION OF ENGINEERS ACT 1967 (REVISED 2015) APPLICATION FOR RENEWAL OF REGISTRATION FOR YEAR.... Regulation 20 of the Registration of Engineers Regulations 1990 (Revised 2015) A. APPLICATION FOR RENEWAL OF REGISTRATION FOR: Professional Engineer (Renewal fee RM200.00 and RM100.00 for age 60 years old) Professional Engineer with Practicing Certificate (Renewal fee RM400.00) Inspector of Works (Renewal fee RM30.00 for every 3-year) Accredited Checkers (Renewal fee RM 200.00 and RM100.00 for age 60 years old) B. APPLICANT DETAIL (to be completed by the applicant in BLOCK LETTERS): 1. Name:... 2. MyKad (Malaysian) / Identity Card No. (Foreign): Nationality:... 3. BEM Registration No.: 4. Address (if any change): Choose either one: Not a bankrupt A bankrupt Residing in Malaysia NOT less Residing in Malaysia less than 6-month prior to date of than 6-month prior to date renewal of renewal 5. Tel. No.:... Mobile Phone No.:... 6. Email :.. Fax No.: C. PAYMENT DETAILS: Payable to LEMBAGA JURUTERA MALAYSIA. Payment details: Bank draft/cheque No.:... Malaysia Money Order/Postal Order No.:. Payment online via bank amount.. on.. Others (please specify):... D. DECLARATION: (choose either one) I declare that I, a) Not a bankrupt A bankrupt b) Residing in Malaysia for NOT less than 6-month prior to date of renewal. Residing in Malaysia for less than 6- month prior to date of renewal. E. CPD RECORD for the last three years: Years Total CPD CPD hours I hereby declare that the information and particulars provided by me in this form is true and correct. (signature of applicant) NOTE: Please ( ) where applicable. (date)
FORM H REGISTRATION OF ENGINEERS ACT 1967 (REVISED 2015) APPLICATION FOR RENEWAL OF REGISTRATION FOR YEAR.... Regulation 20 of the Registration of Engineers Regulations 1990 (Revised 2015) A. APPLICATION FOR RENEWAL OF REGISTRATION FOR: Professional Engineer (Renewal fee RM200.00 and RM100.00 for age 60 years old) Professional Engineer with Practicing Certificate (Renewal fee RM400.00) Inspector of Works (Renewal fee RM30.00 for every 3-year) Accredited Checkers (Renewal fee RM 200.00 and RM100.00 for age 60 years old) B. APPLICANT DETAIL (to be completed by the applicant in BLOCK LETTERS): 1. Name:... 2. MyKad (Malaysian) / Identity Card No. (Foreign): Nationality:... 3. BEM Registration No.: 4. Address (if any change): 5. Tel. No.:... Mobile Phone No.:... 6. Email :.. Fax No.: C. PAYMENT DETAILS: Payable to LEMBAGA JURUTERA MALAYSIA. Payment details: Bank draft/cheque No.: Fill in the table as sample below:... Payment online via bank Years 2016 2017 2018 Total CPD CPD hours 30 60 70 160 amount.. on.. Malaysia Money Order/Postal Order No.:. Others (please specify):... D. DECLARATION: (choose either one) I declare that I, a) Not a bankrupt A bankrupt b) Residing in Malaysia for NOT less than 6-month prior to date of renewal. Residing in Malaysia for less than 6- month prior to date of renewal. E. CPD RECORD for the last three years: Years Total CPD CPD hours I hereby declare that the information and particulars provided by me in this form is true and correct. (signature of applicant) (date)
NOTE: Please ( ) where applicable. FORM H REGISTRATION OF ENGINEERS ACT 1967 (REVISED 2015) APPLICATION FOR RENEWAL OF REGISTRATION FOR YEAR.... Regulation 20 of the Registration of Engineers Regulations 1990 (Revised 2015) A. APPLICATION FOR RENEWAL OF REGISTRATION FOR: Professional Engineer (Renewal fee RM200.00 and RM100.00 for age 60 years old) Professional Engineer with Practicing Certificate (Renewal fee RM400.00) Inspector of Works (Renewal fee RM30.00 for every 3-year) Accredited Checkers (Renewal fee RM 200.00 and RM100.00 for age 60 years old) B. APPLICANT DETAIL (to be completed by the applicant in BLOCK LETTERS): 1. Name:... 2. MyKad (Malaysian) / Identity Card No. (Foreign): Nationality:... 3. BEM Registration No.: 4. Address (if any change): 5. Tel. No.:... Mobile Phone No.:... 6. Email :.. Fax No.: C. PAYMENT DETAILS: Payable to LEMBAGA JURUTERA MALAYSIA. Payment details: Bank draft/cheque No.:... Malaysia Money Order/Postal Order No.:. Payment online via bank amount.. on.. Others (please specify):... D. DECLARATION: (choose either one) I declare that I, a) Applicant signature Not a bankrupt and date of submission. A bankrupt b) E. CPD RECORD for the last three years: Residing in Malaysia for NOT less than 6-month prior to date of renewal. Residing in Malaysia for less than 6- month prior to date of renewal. Years Total CPD CPD hours I hereby declare that the information and particulars provided by me in this form is true and correct. (signature of applicant) (date)
NOTE: Please ( ) where applicable. CHECKLIST (to be submitted together with FORM H) Applicant For office use 1. Form H have been duly filled and signed. 2. CPD record for the last 3 years. 3. Payment by cheque: (a) Payable to Lembaga Jurutera Malaysia. (b) Same amount and figure. (c) Valid bank account and signature. (d) Valid date/month/year. (e) No correction made on cheque. Remarks:............ I confirm that I have completed the above and fulfil BEM requirement FOR OFFICE USE ONLY Signature of Officer-in-Charge Board of Engineers Malaysia (Signature of applicant) Date :. Date :
BOARD OF ENGINEERS MALAYSIA CPD 7/2003 REGISTERED PROFESSIONAL ENGINEER WITH PRACTICING CERTIFICATE CONTINUING PROFESSIONAL DEVELOPMENT RECORD SHEET No. 1 Name : Ir. Ali bin Ahmad Year : 2018 PEPC No. : CE1XXXX Ref. Date CPD Activity/topic/provider 1. Formal Education and Training Activities (time weighted factor = 2) Actual Time (hours) Weight factor Allowable Weighted CPD Hours 1.1 2018 Master in Engineering ME777 Project 32 2 64 1.2 2018 Master in Engineering ME555 Quality 32 2 64 1.3 2018 Master in Engineering ME568 Value Chain 32 2 64 Total Weighted Hours = 192 Total Allowable Weighted CPD Hours (No limit) = 192 2a. Informal Learning Activities - on job learning (time weighted factors = 1) 2a.1 30.4.2018 Introduction to ISO14001 6 1 6 2a.2 22.6.2018 Product briefing on BiMS 6 1 6 1. Formal Education and Training Activities - full time, part time or long-distance formal programmes and training courses leading to a formal qualification such as Postgraduate diploma, Master or PhD degrees, professional certificates and competency certification. A format assessment such as test, examination, dissertation or thesis is envisaged at the end of the education and training programmes. Diploma, Master, PhD Program time claimed can include Total Weighted actual hours Hours of = lectures 12 and/or research Total undertaken Allowable Weighted CPD Hours (Maximum 20 Hours per year) = 12 Distance Education Short Courses 2b.1 2018 Read BEM Buletin & IEM Journal 10 0.5 5 Formal on-the-job training Soft skills training e.g. Communication Skills Workshop Actual Hours is the contact hour with the applicant. E.g. Classroom of 2 hours for 16 weeks (1 semester) is equivalent to 32 CPD Hours 2b. Informal Learning Activities - private study (time weighted factors = 0.5) Total Weighted Hours = 5 Total Allowable Weighted CPD Hours (Maximum 10 Hours per year) = 5
BOARD OF ENGINEERS MALAYSIA CPD 7/2003 REGISTERED PROFESSIONAL ENGINEER CONTINUING PROFESSIONAL DEVELOPMENT RECORD SHEET No. 1 Name : Year : 2018 PE No. : Ref. Date CPD Activity/topic/provider 1. Formal Education and Training Activities (time weighted factor = 2) Actual Time (hours) Weight factor Allowable Weighted CPD Hours 1.1 2018 Master in Engineering ME777 Project 32 2 64 1.2 2018 Master in Engineering ME555 Quality 32 2 64 1.3 2018 Master in Engineering ME568 Value Chain 32 2 64 Total Weighted Hours = 192 Total Allowable Weighted CPD Hours (No limit) = 192 2a. Informal Learning Activities - on job learning (time weighted factors = 1) 2a.1 30.4.2018 Introduction to ISO14001 6 1 6 2a.2 22.6.2018 Product briefing on BiMS 6 1 6 2a. Informal Learning Activities On Job Learning workplace requirements e.g. AutoCAD Software, new machine, product briefing, etc. Total Weighted Hours = 12 Total Allowable Weighted CPD Hours (Maximum 20 Hours per year) = 12 2b. Informal Learning Activities - private study (time weighted factors = 0.5) 2b.1 2018 Read BEM Buletin & IEM Journal 10 0.5 5 Maximum CPD Hours for Informal Learning Activities is 20 CPD Hours per year. E.g Collected CPD Hours is 45 Hours, it can only be accepted at 20CPD Hours only Total Weighted Hours = 5 Total Allowable Weighted CPD Hours (Maximum 10 Hours per year) = 5
BOARD OF ENGINEERS MALAYSIA CPD 7/2003 REGISTERED PROFESSIONAL ENGINEER CONTINUING PROFESSIONAL DEVELOPMENT RECORD SHEET No. 1 Name : Year : 2018 PE No. : Ref. Date CPD Activity/topic/provider 1. Formal Education and Training Activities (time weighted factor = 2) Actual Time (hours) Weight factor Allowable Weighted CPD Hours 1.1 2018 Master in Engineering ME777 Project 32 2 64 1.2 2017 Master in Engineering ME555 Quality 32 2 64 1.3 2016 Master in Engineering ME568 Value Chain 32 2 64 2a. Informal Learning Activities - on job learning (time weighted factors = 1) 2b. Informal Learning Activities Private Study Reading books, journals, manuals. Familiarisation with the operation of technological aids, computer programs, equipment, etc. Total Weighted Hours = 192 Total Allowable Weighted CPD Hours (No limit) = 192 2a.1 30.4.2018 Introduction to ISO14001 6 1 6 2a.2 22.6.2018 Product briefing on BiMS 6 1 6 Total Weighted Hours = 12 Total Allowable Weighted CPD Hours (Maximum 20 Hours per year) = 12 2b. Informal Learning Activities - private study (time weighted factors = 0.5) 2b.1 2018 Read BEM Buletin & IEM Journal 10 0.5 5 Total Weighted Hours = 5 Total Allowable Weighted CPD Hours (Maximum 10 Hours per year) = 5
BOARD OF ENGINEERS MALAYSIA REGISTERED PROFESSIONAL ENGINEER WITH PRACTICING CERTIFICATE CONTINUING PROFESSIONAL DEVELOPMENT RECORD SHEET No. 2 Name : Ir. Ali bin Ahmad Year : 2018 PEPC No. : CE1XXX Ref. Date CPD activity/topic/provider 3. Conference and Meeting (time weighted factor = 1) Actual Time (hours) Weight factor Allowable Weighted CPD Hours 3.1 20.05.2018 ACEM Site Supervision Course 4 1 4 3.2 15.07.2018 BEM Registration of IOW 4 1 4 4. Presentation and Papers (time weighted factors = 10) 4.1 4.3.2018 Total Weighted Hours = 81 Total Allowable Weighted CPD Hours (no limit) = 8 Prepared and presented Fatigue Analysis during FMM Seminar. 4.2 10.4.2018 Prepared and presented Fatigue Analysis during Mechanical Johor Convention. 2 10 20 2 10 20 3. Conference and Meeting Attending seminars, conferences, symposiums, meetings and talks on engineering, management corporate governance, engineering management, accountancy principles, contract laws (non engineering subjects are accepted as it is considered as job related purpose and important to enhance the competency of an engineer. Inspection Technical visits, site visits, etc., not in the normal course of duty as consultants or employees. Total Weighted Hours = Attending cross boundary discipline s seminar e.g. Civil Engineer Total Allowable Weighted CPD Hours (Maximum 30 Hours) = attend M&E Conferences, Electrical engineer attends training on civil 5. Service engineering. Activities (time weighted factor = 1) 5.1 1.2.2018 Factory visit at Japan 2 1 2 5.2 2018 Committee Member of IEM 12 1 12 5.3 11.8.2018 CSR building temporary shelter for flood 18 1 18 victim Total Weighted Hours = 32 Total Allowable Weighted CPD Hours (Maximum 30 Hours) = 30
BOARD OF ENGINEERS MALAYSIA REGISTERED PROFESSIONAL ENGINEER CONTINUING PROFESSIONAL DEVELOPMENT RECORD SHEET No. 2 Name : Year : 2018 PE No. : Ref. Date CPD activity/topic/provider 3. Conference and Meeting (time weighted factor = 1) Actual Time (hours) Weight factor Allowable Weighted CPD Hours 3.1 20.05.2018 ACEM Site Supervision Course 4 1 4 3.2 15.07.2018 BEM Registration of IOW 4 1 4 Total Weighted Hours = 8 Total Allowable Weighted CPD Hours (no limit) = 8 4. Presentation and Papers (time weighted factors = 10) 4.1 4.3.2018 4.2 10.4.2018 Prepared and presented Fatigue Analysis during FMM Seminar. Prepared and presented Fatigue Analysis during Mechanical Johor Convention. 2 10 20 2 10 20 5. Service Activities (time weighted factor = 1) Total Weighted Hours = 40 Total Allowable Weighted CPD Hours (Maximum 30 Hours) = 30 4. Presentation & Papers Preparation of material for courses, conferences, seminars and symposiums. Presentation on industry experience to students at universities, colleges, old boys club, school community, etc. Same paper but recycles (e.g. include new updates) for other forums CPD hours can be claimed. Same paper, no update, reuse for other purpose CPD hours cannot be claimed under this Category but can be claimed under Category 5: Service Activities subject to maximum hours 5.1 1.2.2018 Factory visit at Japan 2 1 2 5.2 2018 Committee Member of IEM 12 1 12 5.3 11.8.2018 CSR building temporary shelter for flood victim 18 1 18 Total Weighted Hours = 32 Total Allowable Weighted CPD Hours (Maximum 30 Hours) = 30
BOARD OF ENGINEERS MALAYSIA REGISTERED PROFESSIONAL ENGINEER CONTINUING PROFESSIONAL DEVELOPMENT RECORD SHEET No. 2 Name : Year : 2018 PE No. : Ref. Date CPD activity/topic/provider Actual Time (hours) Weight factor 5. Service Activities 3. Conference Service and to Meeting the profession (time weighted factor = 1) Member of Engineering Programmes accreditation panel Participation in CPD audits Review of technical papers prior to publication Serving BEM, IEM Committees, other professional institutions, national committees, technical societies. Preparation of draft, papers, minutes of meeting related to engineering and national interest. Arbitrations (unless your job is an arbitrator) Expert Witness (unless your job is an expert witness) Teaching Part-Time course at IPTA/IPTS (as long as it is voluntary job) Allowable Weighted CPD Hours 3.1 20.05.2018 ACEM Site Supervision Course 4 1 4 3.2 15.07.2018 BEM Registration of IOW 4 1 4 4. Presentation and Papers (time weighted factors = 10) 4.2 10.4.2018 Prepared and presented Fatigue Analysis during Organising field Mechanical trips (voluntary) Johor Convention. Total Weighted Hours = 8 Examiner for Professional Assessment Exams/Professional Interview Preparation of PRK Papers (voluntary basis; not salaried for) Conduct in-house training under voluntary basis Mentor Prepared and presented Fatigue Analysis during 4.1 (voluntary) 4.3.2018 FMM Seminar. Organising national conference (voluntary) Total Allowable Weighted CPD Hours (no limit) = 8 2 10 20 2 10 20 Total Weighted Hours = 40 Total Allowable Weighted CPD Hours (Maximum 30 Hours) = 30 5. Service Activities (time weighted factor = 1) 5.1 1.2.2018 Factory visit at Japan 2 1 2 5.2 2018 Committee Member of IEM 12 1 12 5.3 11.8.2018 CSR building temporary shelter for flood victim 18 1 18 Total Weighted Hours = Total Allowable Weighted CPD Hours (Maximum 30 Hours) = 30 32
FOR PE, PEPC AND IOW BOARD OF ENGINEERS MALAYSIA REGISTERED PROFESSIONAL ENGINEER CONTINUING PROFESSIONAL DEVELOPMENT RECORD SHEET No. 3 Every Registered Professional Engineer must submit his/her CPD records together with his/her application for the annual renewal of registration with the Board of Engineers Malaysia. The Board may make random audit (up to 10% per calendar year) on the CPD records submitted. Last 2-year (2016) total declared CPD Last year (2017) total declared CPD Total declared CPD for year 2018 If he/she has recorded CPD in another format, he/she has to submit that with the statement of the experience. His/her record must be comprehensive and shall include all details as shown in the pro format above. i. CPD Hours for this year [ 1 + 2a + 2b + 3 + 4 + 5 ] 2018 277 Hours ii. CPD Hours for last Year 2017 30 Hours iii. CPD Hours for year before last Year 2016 50 Hours iv. Total CPD Hours for the last 3 calendar years 357 Hours Total rolling 3-year collected CPD I hereby declare that the information provided above is true and correct and I shall be fully accountable for it.. (Signature of Applicant). (Date) REMINDER! All Registered Professional Engineer must obtain at least 75 CPD Hours over the last three calendar years. All Registered Professional Engineer with Practicing Certificate must obtain at least 150 CPD Hours over the last three calendar years. All Registered Inspectors of Works must obtain at least 30 CPD Hours over the last three calendar years