YHY202D RfidLoginer Datasheet

Similar documents
Strike the keyboard for you when it sniffing the tag!

MF1 MOA4 S50. Contactless Chip Card Module Specification. This document gives specifications for the product MF1 MOA4 S50.

AN Automatic RS-485 address detection. Document information

550 MHz, 34 db gain push-pull amplifier

AN10688_1. PN532C106 demoboard. Document information. NFC, PN532, PN532C106, demoboard. This document describes PN532C106 demoboard.

Low forward voltage Ultra small SMD plastic package Low capacitance Flat leads: excellent coplanarity and improved thermal behavior

AN SC16IS760/762 Fast IrDA mode. Document information

Installation Manual. Installation Manual for the ADS design kit version v2.1. ADS Design kit Windows Linux Unix Instruction Manual RF small signal

IMPORTANT NOTICE. use

Installation Manual Installation Manual for the MicroWave Office design kit version v1.0

Installation Manual Installation Manual for the Ansoft Designer v5.0 design kit version v1.0

AN Sleep programming for NXP bridge ICs. Document information

PMEG3015EH; PMEG3015EJ

PMEG1030EH; PMEG1030EJ

In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.

PMEG2010EH; PMEG2010EJ; PMEG2010ET

MF1ICS General description. Functional specification. 1.1 Key applications. 1.2 Anticollision. Energy. MIFARE card contacts La, Lb.

DC connector: 5VDC, 2,5A, round; 2,1x5,5x10 mm, inside positive External power supply: AC 230V 50/60Hz, 5V 2,5A out

MF RD700. PEGODA Contactless Smart Card Reader READER COMPONENTS. Preliminary Product Specification Revision 2.0 PUBLIC. July2002

In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.

Total power dissipation: 500 mw Small plastic package suitable for surface-mounted design Wide working voltage range Low differential resistance

Dual back-to-back Zener diode

PRTR5V0U2X Ultra low capacitance double rail-to-rail ESD protection diode Rev January 2008 Product data sheet

In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.

In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.

ES_LPC5410x. Errata sheet LPC5410x. Document information

PESD0402MS05 Surface Mount Polymeric ESD Suppressor

In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.

UM PR533 - PCSC Tool. User manual COMPANY PUBLIC. Rev November Document information

In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.

CAUTION This device is sensitive to ElectroStatic Discharge (ESD). Therefore care should be taken during transport and handling.

2PB709ARL; 2PB709ASL

In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.

IMPORTANT NOTICE. As a result, the following changes are applicable to the attached document.

PESD5V0U2BT. 1. Product profile. Ultra low capacitance bidirectional double ESD protection diode. 1.1 General description. 1.

In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.

In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.

In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.

ER302 Manual. ER302 User Manual. Ordering Information

In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.

PESD5V0U1BA; PESD5V0U1BB; PESD5V0U1BL

SL2ICS5311EW/V7. Name Description. Diameter: 8 Thickness: Material: ground + stress releave. Roughness: R t max. 5 μm. Chip size: 940 x 900 μm 2

In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.

AN LPC1700 secondary USB bootloader. Document information. LPC1700, Secondary USB Bootloader, ISP, IAP

STEVAL-SPBT4ATV3. USB dongle for the Bluetooth class 1 SPBT2632C1A.AT2 module. Features. Description

PESD3V3L1UA; PESD3V3L1UB; PESD3V3L1UL

In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.

MOSAIC CONTROL DISPLAYS

AN Entering ISP mode from user code. Document information. ARM ISP, bootloader

PCA9633 demonstration board OM6282

In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.

In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.

In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.

In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.

In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.

In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.

In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.

In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.

AN LPC1700 Ethernet MII Management (MDIO) via software. Document information. LPC1700, Ethernet, MII, RMII, MIIM, MDIO

& I CODE CL RD701. PEGODA Contactless Smart Card Reader READER COMPONENTS. Product Specification Revision 3.1 PUBLIC.

In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.

In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.

Bidirectional ESD protection diode

QSG DAC1x08D+ECP3 DB

300 V, 100 ma PNP high-voltage transistor

General-purpose Zener diodes in a SOD323F (SC-90) very small and flat lead Surface-Mounted Device (SMD) plastic package.

AN10942 MFRX852 Evaluation Board- Quick start up Guide

NOR- FLASH (16-bit) Parallel NAND (8-bit) Buffers (32-bit databus)

UM QN908x Quick Start. Document information. QN908x, Quick Start, Development Kit, QN9080 DK, QN9080 Development Kit

In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.

AN Interfacing Philips Bridge IC with Philips microcontroller. Document information

PESD5V0C1USF. in portable electronics, communication, consumer and computing devices.

ES_LPC81xM. Errata sheet LPC81xM. Document information

PESD18VV1BBSF. Very symmetrical bidirectional ESD protection diode

Broadband system applications i.e. WCDMA, CATV, etc. General purpose Voltage Controlled Attenuators for high linearity applications

PNP 500 ma, 50 V resistor-equipped transistor; R1 = 2.2 kω, R2 = open

74ABT General description. 2. Features and benefits. 3. Ordering information. Quad 2-input AND gate

MMBZ16VAL. 1. General description. 2. Features and benefits. 3. Applications. 4. Quick reference data

LPC1300, FM+, Fast-mode Plus, I 2 C, Cortex-M3

IoT Sensing SDK. Getting started with IoT Sensing SDK (ISSDK) v1.7 middleware. Document information. IoT Sensing SDK, ISSDK, MCUXpresso, middleware

ACR122S NFC Reader. Datenblatt / Specifications. Technical Specifications

UM PCSerial. Document information. PCSerial, MFRD52x development board, MFRC52x, PN51x design-in kit

Document status: Preliminary

NCR402T. 1. General description. 2. Features and benefits. 3. Applications. 4. Quick reference data

PESD24VF1BSF. Table 1. Quick reference data Symbol Parameter Conditions Min Typ Max Unit C d diode capacitance f = 1 MHz; V R = 0 V

UM User Manual for LPC54018 IoT Module. Rev November Document information

SiGe:C Low Noise High Linearity Amplifier

PESD18VF1BL. 1. General description. 2. Features and benefits. 3. Applications. 4. Quick reference data. 5. Pinning information

AN MIFARE Type Identification Procedure. Application note COMPANY PUBLIC. Rev August Document information

In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.

UM LPC54018 IoT module. Document information. LPC54018, OM40007, Amazon FreeRTOS, AWS, GT1216 LPC54018 IoT module user manual

AN BGA GHz 18 db gain wideband amplifier MMIC. Document information. Keywords. BGA3018, Evaluation board, CATV, Drop amplifier.

M81 16 Binary Outputs

M82 16 Binary Inputs. Embedded Solutions for Transportation and Industrial Markets

LH79524/LH Application Note. Static Memory System Design INTRODUCTION STATIC MEMORY OPERATION

UM NVT2008PW and NVT2010PW demo boards. Document information

CMSIS DAP Setup. Document Version History Document Version ngxtechnologies.com 2

YHY630CTU ISO15693 RFID Reade/Write module

In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.

UM EEPROM Management of PN746X and PN736X. User manual COMPANY PUBLIC. Rev February Document information

Transcription:

Strike the keyboard for you when it sniffing the tag! No Programming Required! No Software Required! Just Plug and Play! Applications: 1) Employee identification 2) Time and attendance 3) Form filter to existing software applications 4) Library, Hoteling, meeting attendance, visitor attendance 5) Secure printing 6) Point of sale 7) Membership applications Ordering information: Model No.: YHY202D Contact Information: EHUOYAN Technology Co., Ltd. Tel: +86-010-59870151 Fax: +86-010-59754725 email: mailto:info@ehuoyan.com WebSite: http:/www.ehuoyan.com Version 1.0 Page 1 of 7 Apr 2011

1.Special Features Contactless USB smart card reader Act as a HID keyboard device Supported card: Mifare 1k(s50), Mifare 4k(s70), s20 Output 10 digits Card serial number, UID only No programming required Built in transceiver antenna Frequency: 13.56 MHz Typical time to read cards:<100ms Communication interface: USB Power supply :DC 5V, BUS power Blue LED indicator Support OS: Windows, Macintosh, Linux Mechanic and environmental characteristics: - Dimensions: 63 18 8 (mm) - Operating temperature: -10 ~60 - Storage temperature: -20~85 - Relative humidity: up to 95% - Weight: 8g 2. Output mode The YHY202D is a RFID reader which can read Mifare one s20, s50 and s70 RFID tags. This reader acts as a USB HID keyboard device. When YHY202D is deployed, no software is needed. It uses standard USB drivers supplied by the operating system such as Windows, Macintosh and Linux. The YHY202D reader can read the supported cards and print the card s serial number as 10 digits(decimal format) and then end with Enter Key. Example: Version 1.0 Page 2 of 7 Apr 2011

3. Device Connect Plug the USB port to the PC USB port, after power on the blue led will flash, it means that the reader is ready. When plug the YHY202D reader to the PC s USB port, the system will recognize it as HID keyboard device. Version 1.0 Page 3 of 7 Apr 2011

Next will be showed on the device manager: It may show different with different system. After installation successfully, open Excel or other application program to read the RFID Tag and the tag s UID will be shown on the screen. 4. Electrical Characteristics 4.1 Operating Condition Range Relative humidity: up to 95% Symbol Parameter Conditions Min Typ Max Unit Tamb VDD Ambient Temperature DC Supply Voltage -10 25 60 DVSS = 0V 4.5 5 5.5 V Version 1.0 Page 4 of 7 Apr 2011

4.2 Current Consumption Table 1 - Operating Condition Range Symbol Parameter Conditions Min Typ Max Unit IDVDD Supply Current Reading card - 35 50 ma 4.3 Operating Distance Table 2 - Current Consumption Symbol Parameter Conditions Min Typ Max Unit OD Tag size more than 20mm Measured from the reader bottom 10 20 25 mm Table 3 - Operating Distance 5. Layout Top view: Bottom view: Side view: Version 1.0 Page 5 of 7 Apr 2011

Package: SIZE: 95(L)*46(W)*22(H)mm 6. Legal information 6.1.Disclaimers General Information in this document is believed to be accurate and reliable. However, EHUOYAN does not give any representations or warranties, expressed or implied, as to the accuracy or completeness of such information and shall have no liability for the consequences of use of such information. Right to make changes EHUOYAN reserves the right to make changes to information published in this document, including without limitation specifications and product descriptions, at any time and without notice. This document supersedes and replaces all information supplied prior to the publication hereof. Suitability for use EHUOYAN products are not designed, authorized or warranted to be suitable for use in medical, military, aircraft, space or life support equipment, nor in applications where failure or malfunction of a EHUOYAN product can reasonably be expected to result in personal injury, death or severe property or environmental Version 1.0 Page 6 of 7 Apr 2011

damage. EHUOYAN accepts no liability for inclusion and/or use of EHUOYAN products in such equipment or applications and therefore such inclusion and/or use is for the customer s own risk. Applications Applications that are described herein for any of these products are for illustrative purposes only. EHUOYAN makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. 6.2.Trademarks Notice: All referenced brands, product names, service names and trademarks are property of their respective owners. EHUOYAN TM are trademarks of EHUOYAN Tech Co.Ltd. ---------------------------------------------------------------------------------------------------------------------- EHUOYAN Tech Co.Ltd 2011. All rights reserved. For more information, please visit:http:/www.ehuoyan.com For sales office addresses, email to: info@ehuoyan.com FILE END Version 1.0 Page 7 of 7 Apr 2011