AC-DC Power Supplies Enclosed type 0F Ordering information 0 F - -O 1 2 3 4 R 1Series name 2Output wattage 3Universal input 4Output voltage Optional *6 N1 :with DIN rail attachment 0F- MAX OUTPUT WATTAGE[W] 0(Peak 0) DC OUTPUT V 2.1(Peak 6.7)A SPECIFICATIONS 0F- VOLTAGE[V] AC7-28 1f or DC26-746 CURRENT[A] ACIN 0V 0.typ ACIN 480V 0.30typ FREQUENCY[Hz] 0/60 (47-63) INPUT ACIN 0V 82typ EFFICIENCY[%] ACIN 480V 78typ ACIN 0V 2typ (At cold start) (At Room Temperature) INRUSH CURRENT[A] ACIN 480V 0typ (At cold start) (At Room Temperature) LEAKAGE CURRENT[mA] 0.7max (60Hz, According to IEC6090) VOLTAGE[V] CURRENT[A] *1 2.1 (Peak 6.7) LINE REGULATION[mV] 96max LOAD REGULATION[mV] 0-2.1A 10max 0-6.7A 480max OUTPUT 0to+0C *2 0max RIPPLE[mVp-p] --0C*2 3max RIPPLE NOISE[mVp-p] 0to+0C *2 680max --0C*2 7max TEMPERATURE REGULATION[mV] - to +0C 600max DRIFT[mV] * 0max START-UP TIME[ms] 800max (ACIN 0V, Io=0%) HOLD-UP TIME[ms] typ (ACIN 0V, Io=0%) OUTPUT VOLTAGE ADJUSTMENT RANGE[V] 21.6-26.4 PROTECTION OVERCURRENT PROTECTION Works over % of peak current and recovers automatically CIRCUIT AND OVERVOLTAGE PROTECTION Works at 11-0% of rating OPERATING INDICATION LED (Green) INPUT-OUTPUT AC3,000V 1minute, Cutoff current = ma, DC00V 0MW min (At Room Temperature) ISOLATION INPUT- AC2,000V 1minute, Cutoff current = ma, DC00V 0MW min (At Room Temperature) OUTPUT- AC00V 1minute, Cutoff current = 0mA, DC00V 0MW min (At Room Temperature) OPERATING TEMP.,HUMID.AND ALTITUDE - to +70C, - 90%RH (Non condensing) (Refer to DERATING CURVE), 3,000m (,000feet) max STORAGE TEMP.,HUMID.AND ALTITUDE - to +7C, - 90%RH (Non condensing), 9,000m (30,000feet) max ENVIRONMENT VIBRATION *3 - Hz, 19.6m/s 2 (2G), 3minutes period, 60minutes each along X, Y and Z axis IMPACT *3 196.1m/s 2 (G), 11ms, once each X, Y and Z axis SAFETY AND AGENCY APPROVALS UL6090-1, C-UL, EN6090-1 NOISE REGULATIONS CONDUCTED NOISE Complies with FCC-A, CISPR11-A, EN011-A CASE SIZE/WEIGHT *4 0XX4mm (WXHXD) / 640g max COOLING METHOD Convection *1 Peak current for 10ms in a 30seconds period is acceptable. *2 In case of rated input/output(acin0-480v/2.1a), either the MHz oscilloscope or the ripple noise meter(equivalent to Keisokugiken:RM1) is used. *3 Option with DIN rail attachment(n1) is only for direction X(refer to sec4.2 in manual). *4 Depth of power supply is 132mm with DIN rail attachment. * Drift is the change in DC output for an eight hour period after a half-hour warm-up at 2C, with the input voltage held constant at the rated input/output. *6 Please contact us about safety approvals for the model with option. -2
0F External view 13max (11.) 0 30 0F- LED Voltage Adjust DIN Rail Attachment 0F--N1 only + - Terminal Block (M4) (1.) (.) (1) (2) 13 (34) 4 (8) (1) (72) () () (3.) Spacer 0F--N1 only 7 119 º3.8 3-M3 Mounting Hole 0 44. 2.4 Terminal Block Cover max 71.1±0. 4.9 2.4±0..7 Weight : 640g or less Tolerance : ±1 Mounting torque : 0.6N m (6.3kgf cm)max Dimensions in mm. Performance data STATIC CHARACTERISTICS RISE TIME & FALL TIME Output Voltage Io=0% Ripple 8 2 0 7 0 RIPPLE mvp-p 2 1 0 DC Output AC Input Io=0% Io=0% ACIN 480V 10 0 170 0 190 0 2 2 230 0 20 INPUT VOLTAGE V 60Hz (AC 0V) OVERCURRENT CHARACTERISTICS INRUSH CURRENT 26 Input Voltage AC480V A/DIV Frequency Load 60Hz 0% Input voltage AC480V 2 4 6 8 OUTPUT CURRENT A -3
AC-DC Power Supplies Enclosed type 7F Ordering information 7 F - -O 1 2 3 4 R 1Series name 2Output wattage 3Universal input 4Output voltage Optional *6 N1 :with DIN rail attachment 7F- MAX OUTPUT WATTAGE[W] 7(Peak 0) DC OUTPUT V 3.1(Peak )A SPECIFICATIONS 7F- VOLTAGE[V] AC7-28 1f or DC26-746 CURRENT[A] ACIN 0V 0.80typ ACIN 480V 0.4typ FREQUENCY[Hz] 0/60 (47-63) INPUT ACIN 0V 82typ EFFICIENCY[%] ACIN 480V 78typ ACIN 0V 2typ (At cold start) (At Room Temperature) INRUSH CURRENT[A] ACIN 480V 0typ (At cold start) (At Room Temperature) LEAKAGE CURRENT[mA] 0.7max (60Hz, According to IEC6090) VOLTAGE[V] CURRENT[A] *1 3.1 (Peak ) LINE REGULATION[mV] 96max LOAD REGULATION[mV] 0-3.1A 10max 0 - A 480max OUTPUT 0to+0C *2 0max RIPPLE[mVp-p] --0C*2 3max RIPPLE NOISE[mVp-p] 0to+0C *2 680max --0C*2 7max TEMPERATURE REGULATION[mV] - to +0C 600max DRIFT[mV] * 0max START-UP TIME[ms] 800max (ACIN 0V, Io=0%) HOLD-UP TIME[ms] typ (ACIN 0V, Io=0%) OUTPUT VOLTAGE ADJUSTMENT RANGE[V] 21.6-26.4 PROTECTION OVERCURRENT PROTECTION Works over % of peak current and recovers automatically CIRCUIT AND OVERVOLTAGE PROTECTION Works at 11-0% of rating OPERATING INDICATION LED (Green) INPUT-OUTPUT AC3,000V 1minute, Cutoff current = ma, DC00V 0MW min (At Room Temperature) ISOLATION INPUT- AC2,000V 1minute, Cutoff current = ma, DC00V 0MW min (At Room Temperature) OUTPUT- AC00V 1minute, Cutoff current = 0mA, DC00V 0MW min (At Room Temperature) OPERATING TEMP.,HUMID.AND ALTITUDE - to +70C, - 90%RH (Non condensing) (Refer to DERATING CURVE), 3,000m (,000feet) max STORAGE TEMP.,HUMID.AND ALTITUDE - to +7C, - 90%RH (Non condensing), 9,000m (30,000feet) max ENVIRONMENT VIBRATION *3 - Hz, 19.6m/s 2 (2G), 3minutes period, 60minutes each along X, Y and Z axis IMPACT *3 196.1m/s 2 (G), 11ms, once each X, Y and Z axis SAFETY AND AGENCY APPROVALS UL6090-1, C-UL, EN6090-1 NOISE REGULATIONS CONDUCTED NOISE Complies with FCC-A, CISPR11-A, EN011-A CASE SIZE/WEIGHT *4 6XX4mm (WXHXD) / 70g max COOLING METHOD Convection *1 Peak current for 10ms in a 30seconds period is acceptable. *2 In case of rated input/output(acin0-480v/3.1a), either the MHz oscilloscope or the ripple noise meter(equivalent to Keisokugiken:RM1) is used. *3 Option with DIN rail attachment(n1) is only for direction X(refer to sec4.2 in manual). *4 Depth of power supply is 132mm with DIN rail attachment. * Drift is the change in DC output for an eight hour period after a half-hour warm-up at 2C, with the input voltage held constant at the rated input/output. *6 Please contact us about safety approvals for the model with option. -4
7F External view + - 13max (11.) Terminal Block (M4) (1.) (.) 7F- LED Voltage Adjust (1) (2) 13 (34) 4 (1) (72) 119 º3.8 3-M3 Mounting Hole (8) 6 4 (37) () DIN Rail Attachment 7F--N1 only (3.) Spacer 7F--N1 only 7 64. 9. 31.7 Terminal Block Cover max 71.1±0. 4.9 38.1±0..7 Weight : 70g or less Tolerance : ±1 Mounting torque : 0.6N m (6.3kgf cm)max Dimensions in mm. Performance data STATIC CHARACTERISTICS RISE TIME & FALL TIME Output Voltage Io=0% Ripple 8 2 0 7 0 RIPPLE mvp-p 2 1 DC Output 0 AC Input Io=0% Io=0% ACIN 480V 10 0 170 0 190 0 2 2 230 0 20 INPUT VOLTAGE V 60Hz (AC 0V) OVERCURRENT CHARACTERISTICS INRUSH CURRENT 26 Input Voltage AC480V A/DIV Frequency Load 60Hz 0% Input voltage AC480V 2 4 6 8 OUTPUT CURRENT A -
AC-DC Power Supplies Enclosed type 0F Ordering information 0 F - -O 1 2 3 4 R 1Series name 2Output wattage 3Universal input 4Output voltage Optional *6 N1:with DIN rail attachment 0F- MAX OUTPUT WATTAGE[W] 0 (Peak 1,008) DC OUTPUT V 8.4 (Peak 42)A SPECIFICATIONS 0F- VOLTAGE[V] AC7-28 1f or DC26-30 CURRENT[A] ACIN 0V 1.typ ACIN 480V 0.typ FREQUENCY[Hz] 0/60 (47-63) ACIN 0V 81typ EFFICIENCY[%] INPUT ACIN 480V 81typ POWER FACTOR ACIN 0V 0.98typ ACIN 480V 0.93typ ACIN 0V 2typ (At cold start) (At Room Temperature) INRUSH CURRENT[A] ACIN 480V 0typ (At cold start) (At Room Temperature) LEAKAGE CURRENT[mA] 1.max (60Hz, According to IEC6090) VOLTAGE[V] CURRENT[A] *1 8.4 (Peak 42) LINE REGULATION[mV] 96max LOAD REGULATION[mV] 0-8.4A 10max RIPPLE[mVp-p] 0to+0C *2 0max --0C*2 3max OUTPUT RIPPLE NOISE[mVp-p] 0to+0C *2 680max --0C*2 7max TEMPERATURE REGULATION[mV] - to +0C 600max DRIFT[mV] * 0max START-UP TIME[ms] 800max (ACIN 0V, Io=0%) HOLD-UP TIME[ms] 0typ (ACIN 0V, Io=0%) OUTPUT VOLTAGE ADJUSTMENT RANGE[V] 21.6-26.4 PROTECTION OVERCURRENT PROTECTION Works over % of peak current and recovers automatically CIRCUIT AND OVERVOLTAGE PROTECTION Works at 11-0% of rating OPERATING INDICATION LED (Green) INPUT-OUTPUT AC3,000V 1minute, Cutoff current = ma, DC00V 0MW min (At Room Temperature) ISOLATION INPUT- AC2,000V 1minute, Cutoff current = ma, DC00V 0MW min (At Room Temperature) OUTPUT- AC00V 1minute, Cutoff current = 0mA, DC00V 0MW min (At Room Temperature) OPERATING TEMP.,HUMID.AND ALTITUDE - to +60C, - 90%RH (Non condensing) (Refer to DERATING CURVE), 3,000m (,000feet) max STORAGE TEMP.,HUMID.AND ALTITUDE - to +7C, - 90%RH (Non condensing), 9,000m (30,000feet) max ENVIRONMENT VIBRATION *3 - Hz, 19.6m/s 2 (2G), 3minutes period, 60minutes each along X, Y and Z axis IMPACT *3 196.1m/s 2 (G), 11ms, once each X, Y and Z axis SAFETY AND AGENCY APPROVALS UL6090-1, C-UL, EN6090-1 NOISE REGULATIONS CONDUCTED NOISE Complies with FCC-A, CISPR11-A, EN011-A CASE SIZE/WEIGHT *4 10XXmm (WXHXD) / 1,700g max COOLING METHOD Convection *1 Peak current for 0ms in a 30seconds period is acceptable. *2 In case of rated input/output(acin0-480v/8.4a), either the MHz oscilloscope or the ripple noise meter(equivalent to Keisokugiken:RM1) is used. *3 Option with DIN rail attachment(n1) is only for direction X(refer to sec4.2 in manual). *4 Depth of power supply is 133mm with DIN rail attachment. * Drift is the change in DC output for an eight hour period after a half-hour warm-up at 2C, with the input voltage held constant at the rated input/output. *6 Please contact us about safety approvals for the model with option. -6
0F External view 3-Spacer 0F-O-N1 only (72) (23) 3-DIN Rail Attachment 0F-O-N1 only (38) max 2-Terminal Block Cover 13 () Mounting Hole Name Plate Voltage Adjust 10 (98) (92.) LED for confirming of output 7-M4 t0. 1.6 (.4) t0. 4-M4 Mounting Hole V+ADJ (11) (6) (73.) (3.) (0) (0) () 7 (29) (43) (8) 0F () () (8) (97) Tolerance ±1 Material Electric galvanizing steel board Weight:1700g or less. Mounting torque:0.6n m(6.3kgf cm)max Dimensions in mm Performance data INPUT HARMONIC CURRENT (0F-) RISE TIME & FALL TIME (0F-) HARMONIC CURRENT A 1 0.1 0.01 Harmonic current standard class A (at odd number) Load factor 0% Input voltage AC 0V 2 1 0 DC Output AC Input Io=0% ACIN 480V 0.001 0 30 40 HARMONIC ORDER 0ms/DIV OVERCURRENT CHARACTERISTICS (0F-) INRUSH CURRENT (0F-) 30 2 1 Input Voltage AC480V A/DIV Frequency Load 60Hz 0% Input voltage AC480V 40 60 80 OUTPUT CURRENT A -7