QU-DV12DL 3G SDI to HDMI Converter OPERATION MANUAL
Disclaimers The information in this manual has been carefully checked and is believed to be accurate. CYP (UK) Ltd assumes no responsibility for any infringements of patents or other rights of third parties which may result from its use. CYP (UK) Ltd assumes no responsibility for any inaccuracies that may be contained in this document. CYP (UK) Ltd also makes no commitment to update or to keep current the information contained in this document. CYP (UK) Ltd reserves the right to make improvements to this document and/or product at any time and without notice. Copyright Notice No part of this document may be reproduced, transmitted, transcribed, stored in a retrieval system, or any of its part translated into any language or computer file, in any form or by any means electronic, mechanical, magnetic, optical, chemical, manual, or otherwise without express written permission and consent from CYP (UK) Ltd. Copyright 2011 by CYP (UK) Ltd. All Rights Reserved. Version 1.1 August 2011 Trademark Acknowledgments All products or service names mentioned in this document may be trademarks of the companies with which they are associated.
Safety Precautions Please read all instructions before attempting to unpack, install or operate this equipment and before connecting the power supply. Please keep the following in mind as you unpack and install this equipment: Always follow basic safety precautions to reduce the risk of fire, electrical shock and injury to persons. To prevent fire or shock hazard, do not expose the unit to rain, moisture or install this product near water. Never spill liquid of any kind on or into this product. Never push an object of any kind into this product through any openings or empty slots in the unit, as you may damage parts inside the unit. Do not attach the power supply cabling to building surfaces. Use only the supplied power supply unit (PSU). Do not use the PSU if it is damaged. Do not allow anything to rest on the power cabling or allow any weight to be placed upon it or any person walk on it. To protect the unit from overheating, do not block any vents or openings in the unit housing that provide ventilation and allow for sufficient space for air to circulate around the unit. Revision History Version No. Date Summary of Change VS1 25/11/2011 First release VR2 12/03/2012 Add Support Timings
Contents 1. Introduction...6 2. Applications...6 3. Package Contents...6 4. System Requirements...6 5. Features...6 5. Operation Controls and Functions...7 5.1 Transmitter Front and Rear Panels... 7 5.2 Receiver Front and Rear Panels... 8 5.2 Receiver Front and Rear Panels... 9 5.4 RJ45 Pin Assignment... 9 6. Connection Diagram... 10 7. Specifications... 11 8. Acronyms... 11
1. Introduction The QU-DVI2DL Dual-Link DVI Distribution Amplifier allows a single DVI-D signal to be split into two DVI outputs. This device accepts both Single- Link and Dual-Link DVI signals supporting up to WQXGA resolutions for Dual-Link and WUXGA@RB for Single-Link DVI. 2. Application Split a single Dual Link DVI signal to 2 Dual Link Monitors 3. Package Contents Dual-Link DVI Splitter 5V/2.6A or 4A DC adaptor Operation manual 4. SYSTEM REQUIREMENT Input source equipment such as PC with a Dual Link DVI capable graphics card and Dual Link DVI compatible displays with Dual Link DVI cables. 5. Features Supports video resolutions up to WQXGA with Dual-Link DVI or WUXGA with Single-Link DVI Built-in adaptive equalizer provides long cable support Supports EDID function 2.25Gbps Frequency Clock per channel (225MHz Clock Rate) Supports PC resolutions: VGA to WQXGA Supports HDTV resolutions : 480p to 1080p 6
6. Operation Controls and Functions 6.1 Front Panel Dual Link DVI IN SYNC DC 5V Power QU-12D 1 2 3 4 1 Dual-Link DVI IN Connect to the input source such as PC/Graphic card with Dual-Link DVI cable. 2 SYNC LED This LED will illuminate when the input source has send out signal and the output display is in power on status. 3 POWER LED This LED will illuminate when the device is connected to power adaptor with AC supply. 4 DC 5V Plug the 5V DC power supply included in the package into the unit and connect it to AC wall outlet. 7
6.2 Rear Panel Dual Link DVI OUT Dual Link DVI OUT 1 2 2 1 Dual-Link DVI OUT 1&2 Connect to DVI Dual Link displays with Dual Link DVI cables. Note: The device will detect OUT 1 as the primary EDID information when both outputs are connected with an active monitor. However, when only 1 output is detected then the device will treat that as the primary EDID information. 8
7. Connection Diagram 9
8. Specifications Video Bandwidth 2 x 165MHz Input Port 1 x Dual-Link DVI Output Ports 2 or 4 x Dual-Link DVI I/O Support ResolutionVGA ~ WQXGA@60 / Dual-Link VGA~ WUXGA@60RB / Single-Link ESD Protection Human body model: ± 8kV(Air-gap discharge) ± 4kV(Contact discharge) Power Supply 5V/2.6A for 2DDS or 5V/4A for 4DDS DC (US/EU standards, CE/FCC/UL certified) Dimensions 125 mm (W) 102.5 mm (D) 30 mm (H)/2DDS 141 mm (W) 163 mm (D) 38 mm (H)/4DDS Weight 288g/2DDS, 670g/4DDS Chassis Material Metal Silkscreen Colour Black Operating Temperature0 C~40 C / 32 F~104 F Storage Temperature 20 C~60 C / 4 F~140 F Relative Humidity 20 ~ 90% RH (non-condensing) Power Consumption 6.8 W/2DDS, 17W/4DDS 9. Acronyms ACRONYM DVI COMPLETE TERM Digital Visual Interface 10
11
12
13
CIE-Group Ltd, Widdowson Close, Blenheim Industrial Estate, Bulwell, Nottingham NG6 8WB Tel: +44 (0)115 977 0075 Fax: +44 (0)115 977 0081 Email: info@cie-group.com www.cie-group.com