Fujifilm DR Solution FDR AcSelerate The new pinnacle in diagnostic imaging from Fujifilm CsI Scintillator ISS Technology Dynamic Visualization
Welcome to the X-ray room of the future! A streamlined solution with dynamic speed and sharp images. CsI Scintillator ISS Technology Dynamic Visualization
Fujifilm s experience and expertise combine for unprecedented images. N E W F L A T P A N E L D E T E C T O R N E W C O N S O L E A D V A N C E ISS technology New image processing Dynamic Visualization Conventional method Fujifilm s new method X-ray X-ray Glass substrate Glass substrate Photodiode array Well-crystallized section (Light is well guided.) Photodiode array SEM image of CsI crystals Photodiode array Poor-crystallized section (Light is well scattered.) Conventional image New image Customised image Fujifilm s new Flat Panel Detector capitalizes on the high X-ray absorption characteristics of CsI and the ability of its needle crystals to deliver high image sharpness. Fujifilm has developed a new Flat Panel Detector (CsI) featuring its proprietary Irradiation Side Sampling (ISS) technology which offers high image quality. By reading the data from the surface of the detector (the incident side), light is collected before the radiation can be attenuated and diffused within the detector. Thus MTF and DQE are significantly improved when compared to conventional methods. Fujifilm s renowned diagnostic image quality has now evolved still further. Leveraging its world leading image processing technology, built on a long heritage in medical imaging, and its endless pursuit of improvements in diagnostic imaging, Fujifilm s CONSOLE ADVANCE is more than able to meet the exacting demands of the modern medical market. Fujifilm s image processing technology automatically recognizes the region of interest and applies the optimum image processing parameters in order to deliver reproducible, high quality images every time. This greatly streamlines workflow thus reducing the load on Technologists and speeding up diagnosis for Doctors. CONSOLE ADVANCE flexible for FDR and FCR Image stitching function (Option) Auto-trimming function A highly sensitive DR Detector with unique features FDR AcSelerate is equipped with an innovative FPD, ISS and Image Intelligence technology that produces extremely high image quality. The use of these unique features is particularly useful in producing high quality chest and abdomen images whilst using minimized radiation doses. FDR D-EVO FDR AcSelerate FCR Reader DICOM MWM/MPPS CONSOLE ADVANCE DICOM Storage
AcSelerate has been ergonomically designed, not only for the technologist, but also for the patient. Light-weight Ceiling Suspension System Generator 1900mm 340 Vertical movement range 1750mm The lightweight ceiling suspension system and tube head provide smooth movement to any position, to any angle and to any height within the examination room. The support features an extended range of vertical movement, 1750 mm, which allows for easy examination of the lower extremities. 1750mm Ease of use in connection with CONSOLE ADVANCE Tilting Upright Stand 135 Wide range of movement for various examinations 930mm Weight capacity 250kg The vertical movement of the flat panel detector can be operated either using the motor or manually from a height of 390 mm from the floor to 1900 mm. The motorized vertical movement allows you to improve your workflow when taking a variety of exposures not only of the chest and abdomen but also exposures from the cervical spine down to the lower extremities. In addition, with the minus 20 degrees to 90 degrees angulation capability, the skull and upper extremities can also be examined as with the exposures of the elbow. Intuitive and flexible for any type of exams, the Generator can perform a wide range of studies on patients of all sizes from babies to adults. It also features CONSOLE ADVANCE, an easy-to-view display, which enables you to set the exposure settings easily and to start up and shut down the system quickly. 150mm Optional accessories 390mm -20 to 90 550mm 600mm Table The table size is 2400 mm 850 mm with an adjustable height of 550 mm to 930 mm from the floor, and weight capacity is 250 kg, making it extremely flexible for easy positioning and for accommodating all types and sizes of patients. The floating top table is equipped with three control methods depending upon operational need. Tomography is available as a standard feature. Foot control QC phantom holder Foot Control Foot Control (Strip) Hand Controller Compression belt Lateral cassette holder Increase efficiency with automated functionality Auto-Positioning Auto-Tracking Auto-Collimation By selecting the program from the exposure menu, on the CONSOLE ADVANCE, the X-ray tube automatically moves to the required position using the 5-axis motorized tube support. Manual adjustments can always be applied, however, the simplicity and accuracy of AcSelerate make manual movements a thing of the past! 1 Select from exposure menu 2 Activate X-ray tube with remote controller 3 X-ray tube automatically positions 2 3 1 When the patient is on the table, the FPD will auto-track the manual movement of the X-ray tube to allow examination of the intended body part. If the patient is at the upright detector, the X-ray tube will automatically track the vertical movements of the FPD. Manual operation Auto-Tracking The required collimation area, taking into account the SID (Source to Image Distance) is automatically adjusted to the body part selected from the exposure menu. Manual adjustments can be made easily if needed. Auto-Filtering Three sizes of copper filter automatically adjust to the designated body part selected on the exposure menu thus reducing unnecessary radiation, this filtration can also be used manually.
FDR AcSelerate Specifications X-ray system Line voltage connection: 400V 3~(3N~), 480V 3~±10% (50Hz/60Hz) Power consumption: 110kVA Ceiling Tube support Fully motorized 5 axes celling tube support Vertical travel range: 175cm Minimum focus-ceiling distance: 89cm Tube rotation alpha/beta: alpha: 135degree beta: 340degree Tomography application Automatic positioning Generator High frequency generator Output: 65kW / 80kW*1 Exposure voltage: 40 to 150kVp ma range: 10 to 800mA [10 to 1000mA] AEC (upright stand/table): 3 fields ion-chamber DAP*2 (inside collimation) X-Ray Tube Focal spot: 0.6 /1.2mm [0.6 /1.0mm]*1 Anode heat storage capacity: 400kHU [600kHU] Anode heat dissipation rate: Max 125kHU/min. Output of the small/large focus: 40/100kW [32/72kW] Collimator Copper filter: 0.1mm, 0.2mm, 0.3mm Rotation: 45degree Square collimation: Manual / Motorized Table Tabletop size: 850 2400mm Table height: 550 to 930mm Travel range: transverse: 150mm longitudinal: 600mm Detector travel range: 630mm Max. table load: 250kg Automatics synchronization function Accessories: Hand control (table operation and collimation control) Patient hand grips Lateral cassette holder*2 X, Y and Z foot control vertical movement*2 X and Y foot control strip type*2 Compression belt*2 Tabletop mattress*2 Grid*2 Upright stand Travel range (central beam - floor): Motorized 390 to 1900mm Tilting angle: -20 to 90 degree Automatic synchronization function Accessories: Hand control (collimation & detector elevation control) Foot switch for manual Patient grips*2 (side hand grips and stretch grip) Foot control for motorized vertical movement*2 Cassette holder*2 Grid*2 Detector Indirect conversion method + ISS*3 Flat Panel Detector Dimensions: 17 17 (43.2 43.2cm) single panel: Pixel size: 150um Resolution: 2880 2880 Density resolution: 16bit Panel cooling method: Fan cooled system Console Advance High performance PC Monitor: 17 color TFT monitor (1280 1024 display matrix) Image preview: min. 2.5sec (shortest) Completion of Image processing: min. 4.5sec or less DICOM functions*2 Image Intelligence Automatic image stitching*2 Energy subtraction*2 Tomosynthesis*2 *1: The figures in [ ] apply when the output 80kW is selected *2: Option *3: Irradiation-side sampling Dimensions Unit mm (in.): 4000 (158) X-movement max 3350 (132) Standard 4m rail 135 340 890-2640 (35-104) 4000 (158) Y-movement max 3160 (124) Standard 4m rail 610 (24) 1015 (40) 740 (29) *Optional Rail of 4000mm 5000mm is available 2313 (91) 600 (24) 120 (5) 400 (16) 390 (15) 1900 (75) 850 (33) 550 930 (22 37) 2400 (95) FDR AcSelerate (Model: FDR200) This equipment is a Class 2 laser product (IEC60825-1: 2007). Specifications are subject to change without notice. All brand names or trademarks are the property of their respective owners. All products require the regulatory approval of the importing country. For details on their availability, contact our local representative. Ref. No. XB-996E (SK 11 12 F1079 F9711) Printed in Japan 2011 FUJIFILM Corporation