V2.2 Installation Guide Please read this guide before operating this product. After you finish reading this guide, store it in a safe place for future reference.
Workflow Composer Installation Guide
Contents Preface... iii Target Readers...iii How To Use This Manual...iv Indications Used in This Manual...iv Buttons Used in This Manual...iv Displays Used in This Manual... v Abbreviations Used in This Manual...vi Trademarks...vi Chapter 1 Before Using this Product System Requirements...1-2 Devices... 1-2 Web Browsers... 1-3 Chapter 2 Installing Workflow Composer Installing and Starting Workflow Composer...2-2 Chapter 3 Uninstalling Workflow Composer Stopping and Uninstalling Workflow Composer...3-2 Chapter 4 Troubleshooting List of Error/Warning Messages...4-2 Messages during Installation... 4-2 ii
Preface Thank you for purchasing Workflow Composer. Please read this manual thoroughly before operating the product to familiarize yourself with its capabilities, and to make the most of its many functions. After reading this manual, store it in a safe place for future reference. Target Readers This manual is targeted for readers who have basic operational knowledge of Canon multifunctional devices, Windows, and networks. Considerable effort has been made to ensure that this manual is free of inaccuracies and omissions. However, as we are constantly improving our products, if you need an exact specification, please contact Canon. Data damaged or deleted while using this software cannot be recovered. Canon Inc. shall not be liable for the damage or loss of data, or losses or expenses resulting therefrom. iii
How To Use This Manual Indications Used in This Manual This manual explains operating procedures and important handling precautions as follows. IMPORTANT Indicates operational requirements and restrictions. Be sure to read these items carefully to operate the machine correctly, and avoid damage to the machine or property. NOTE Indicates a clarification of an operation, or contains additional explanations for a procedure. Reading these notes is highly recommended. Buttons Used in This Manual The following symbols and button names are a few examples of how buttons to be clicked are represented in this manual: Buttons/Menu Commands on Computer Operation Screens: [Button/Menu Command Name] Examples: [Log In] [OK] NOTE The procedures in this manual assume that the Windows [Start] menu and Control Panel display have not been customized after Windows was installed. iv
Displays Used in This Manual Screen shots of the computer displays used in this manual may differ slightly, depending on the operating system that you are using. The items which you should select/click are marked with a, as shown below. When multiple items can be selected/clicked, they are circled. 1 Click [Log In]. Click here for operation. v
Abbreviations Used in This Manual In this manual, product names and model names are abbreviated as follows: Microsoft Windows Server 2003: Windows Server 2003 Microsoft Windows Server 2003 R2: Windows Server 2003 R2 Microsoft Windows Server 2008: Windows Server 2008 Microsoft Windows Server 2008 R2: Microsoft Windows XP: Microsoft Windows Vista: Windows Server 2008 R2 Windows XP Windows Vista Microsoft Windows 7: Windows 7 Microsoft Windows 8: Windows 8 Microsoft Windows 8.1: Windows 8.1 Microsoft Windows operating system: Apple Mac: Workflow Composer V2.2: imageware Workflow Editor V2.0 or later: Windows Mac Workflow Composer Workflow Editor Trademarks "MEAP" is a trademark of CANON Inc., referring to an "application platform" for Canon multifunction and single function printers. Windows and Windows Vista are trademarks or registered trademarks of Microsoft Corporation in the United States and other countries. Microsoft and SharePoint are trademarks or registered trademarks of Microsoft Corporation in the United States and other countries. Macintosh, Mac, Mac OS and Safari are trademarks of Apple Inc., registered in the U.S. and/or other countries. Java and all Java based trademarks and logos are trademarks or registered trademarks of Oracle and/ or its affiliates. Other product and company names herein may be the trademarks of their respective owners. vi
Before Using this Product 1CHAPTER This chapter describes the system requirements for Workflow Composer. System Requirements...1-2 Devices... 1-2 Web Browsers... 1-3 1-1
System Requirements This section describes the system requirements for Workflow Composer. Devices For information on the devices supported by this version of Workflow Composer, see "Table of Workflow Composer Application Files." IMPORTANT To use Workflow Composer in conjunction with Workflow Editor and Workflow Management Plug-in, the Device Information Delivery Settings function must be available. The following conditions must be met to send and receive flows between devices without using Workflow Editor: --The Device Information Delivery Settings function must be available for flows. --The devices to send and receive flows must be of the same model. However, some information may not be sent and received correctly, depending on the optional products that are installed. --The same System Manager ID and System Password must be set on each device with which you want to send and receive flows. The Device Information Delivery Settings function for flows can be used by setting [Workflow Composer] to [Off] in [Restrict Receiving for Each Function] in [Device Information Delivery Settings] on the [Settings/Registration] screen of devices. After distributing/receiving flows, set this setting to [On] again, as necessary. For more information, see the manuals for the device. 1-2 System Requirements
Web Browsers The following combination of operating systems and Web browsers can access the management page of Workflow Composer. Operating System Web Browser Windows XP Professional SP3 Windows Internet Explorer 7 Windows Vista SP2 Windows Internet Explorer 8 Windows 7 Windows Internet Explorer 9 Windows 8 Windows Internet Explorer 10 Windows 8.1 Windows Internet Explorer 11 Windows Server 2003 SP2 Windows Server 2003 R2 SP2 Windows Server 2008 SP2 Windows Server 2008 R2 SP2 Mac OS X 10.4 Mac OS X 10.5 Mac OS X 10.6 Mac OS X 10.7 OS X Mountain Lion (v10.8) OS X Mavericks (v10.9) Windows Internet Explorer 7 Windows Internet Explorer 8 Safari 3.2.1 or later Safari 3.2.1 or later Safari 4.0.3 or later Safari 5.1 or later Safari 6.0 or later Safari 7.0 or later IMPORTANT Your browser requires the following settings: --JavaScript should be enabled. --Cookies should be enabled for each session. System Requirements 1-3
1-4 System Requirements
Installing Workflow Composer 2CHAPTER This chapter describes how to install Workflow Composer. Installing and Starting Workflow Composer...2-2 2-1
Installing and Starting Workflow Composer To use Workflow Composer, it is necessary to install an application file and license file in the device, and then start Workflow Composer. The application file is included on the CD-ROM that contains this instruction manual. The following two methods exist for installing Workflow Composer: Using SMS (Service Management Service) Using the "Register/Update Software" Function This section describes the procedure for installing Workflow Composer using SMS (Service Management Service) from a Web browser of a computer on the network. To use the Register/ Update Software function, install Workflow Composer from the touch panel display or a computer (Remote UI). For more information, see the manuals for the device. IMPORTANT License files may be provided by your local authorized Canon dealer, or they may have to be retrieved from the license management system on the Internet. The URL for the license management system is: http://www.canon.com/lms/license/ A license access number and device serial number are required to retrieve a license file from the license management system. The device's serial number is the number displayed on the bottom of the screen when you press [Counter Check] on the device (and is also displayed in the top left of the SMS screen). Store the license file in a safe place. It may be required when reinstalling Workflow Composer. If the device enters the Shutdown mode while installing Workflow Composer, an error message is displayed on the SMS installation page. The installation may be canceled. In this case, restart the device, and then install Workflow Composer again. For information on restarting the device, see the manuals for the device. When installing Workflow Composer on a device that already has it installed, it is recommended that you export the flows registered in the device. For more information, see the User's Guide for Workflow Composer. 2-2 Installing and Starting Workflow Composer
1. Start your Web browser enter the following URL. http://<ip address or host name of the device> The Log In screen is displayed. 2. Enter the required items click [Log In]. IMPORTANT Log in with administrator privileges (System Administrator or SSO-H Administrator). For information on login services, see the manuals for the device. If you are not using a login service (default status): Enter [System Manager ID] and [System PIN] click [Administrator Login]. The default System Manager ID and System Password is '7654321'. If Default Authentication (Department ID Management) is set as the login service: Enter [Department ID] and [PIN] click [Log In]. If SSO-H (Single Sign-On H) is set as the login service: Enter [User Name] and [Password] select [Login Destination] click [Log In]. Installing and Starting Workflow Composer 2-3
3. Click [Service Management Service] under [Management Tools]. The Login page of SMS is displayed. 2-4 Installing and Starting Workflow Composer
4. Enter the password click [Log In]. The default password is 'MeapSmsLogin' (case-sensitive). The [MEAP Application Management] page is displayed. Installing and Starting Workflow Composer 2-5
5. Click [Install MEAP Application]. NOTE The following available resources are required to install Workflow Composer on a device: For Models with SVGA Touch Panel Display: --Storage/Hard Disk: 200 MB --Memory: 10 MB --Threads: 22 --Sockets: 2 --File Descriptors: 14 For Models with VGA Touch Panel Display: --Storage/Hard Disk: 185 MB --Memory: 9 MB --Threads: 15 --Sockets: 7 --File Descriptors: 10 The [Install MEAP Application/License] page is displayed. 2-6 Installing and Starting Workflow Composer
6. Click [Browse] specify the path to the application file (.jar) and license file (.lic). 7. Click [Install]. The installation confirmation page is displayed. 8. Click [Yes]. Wait until the installation is complete. 9. Click [MEAP Application Management]. Workflow Composer is displayed in the application list on the [MEAP Application Management] page. Installing and Starting Workflow Composer 2-7
10. Click [Start] for [Workflow Composer]. The status field changes from [Installed] to [Started], and Workflow Composer can be used. NOTE It is not necessary to start/stop Workflow Composer every time the main power of the device is turned ON/OFF. 11. Click [Log Out from SMS]. 2-8 Installing and Starting Workflow Composer
Uninstalling Workflow Composer 3CHAPTER This chapter describes how to uninstall Workflow Composer. Stopping and Uninstalling Workflow Composer...3-2 3-1
Stopping and Uninstalling Workflow Composer Use SMS (Service Management Service) to uninstall Workflow Composer. Perform the procedure for uninstalling Workflow Composer in the following order: Stop Workflow Composer Disable the License File Download and Delete the Disabled License File Uninstall Workflow Composer 1. Start your Web browser enter the following URL. http://<ip address or host name of the device> The Log In screen is displayed. 2. Enter the required items click [Log In]. IMPORTANT Log in with administrator privileges (System Administrator or SSO-H Administrator). For information on login services, see the manuals for the device. If you are not using a login service (default status): Enter [System Manager ID] and [System PIN] click [Administrator Login]. The default System Manager ID and System Password is '7654321'. If Default Authentication (Department ID Management) is set as the login service: Enter [Department ID] and [PIN] click [Log In]. If SSO-H (Single Sign-On H) is set as the login service: Enter [User Name] and [Password] select [Login Destination] click [Log In]. 3-2 Stopping and Uninstalling Workflow Composer
3. Click [Service Management Service] under [Management Tools]. The Login page of SMS is displayed. Stopping and Uninstalling Workflow Composer 3-3
4. Enter the password click [Log In]. The default password is 'MeapSmsLogin' (case-sensitive). The [MEAP Application Management] page is displayed. 3-4 Stopping and Uninstalling Workflow Composer
5. Click [Stop] for [Workflow Composer]. The status field changes to [Stopped]. Stopping and Uninstalling Workflow Composer 3-5
6. Click [Workflow Composer]. The [Application/License Information] page is displayed. 3-6 Stopping and Uninstalling Workflow Composer
7. Click [License Management]. The [License Management] page is displayed. Stopping and Uninstalling Workflow Composer 3-7
8. Click [Disable]. A confirmation page for disabling the license file is displayed. 9. Click [Yes]. [Download] and [Delete] in [Download/Delete Disabled License File] are enabled. 3-8 Stopping and Uninstalling Workflow Composer
10. Click [Download] for [Download/Delete Disabled License File]. IMPORTANT Store the downloaded license file in a safe place, as it is used when reinstalling Workflow Composer. Stopping and Uninstalling Workflow Composer 3-9
11. Follow the instructions on the screen to save the disabled license file (extension: lic). 12. Click [Delete] for [Download/Delete Disabled License File]. A confirmation page for deleting the license file is displayed. 13. Click [Yes]. 14. Click [MEAP Application Management]. The [MEAP Application Management] page is displayed, and the license field of Workflow Composer changes to [Not Installed]. 15. Click [Uninstall] for [Workflow Composer]. The uninstallation confirmation page is displayed. 3-10 Stopping and Uninstalling Workflow Composer
16. Click [Yes]. [Workflow Composer] is deleted from the list of applications. 17. Click [Log Out from SMS]. Stopping and Uninstalling Workflow Composer 3-11
3-12 Stopping and Uninstalling Workflow Composer
Troubleshooting 4CHAPTER This chapter includes a list of error/warning messages. List of Error/Warning Messages...4-2 Messages during Installation... 4-2 4-1
List of Error/Warning Messages This section describes the error messages and warning messages displayed when using Workflow Composer, and the procedure for resolving them. Messages during Installation The specified application does not support this device. Cause Remedy The version you tried to install is not supported by this model. Check the model name of the device and install the supported application version. 4-2 List of Error/Warning Messages
Pub No. SE-IE-1235-V4 CANON INC. 2014