Multidisciplinary System Optimisation on the Design of Cost Effective Space Launch Vehicle

Transcription

1 Monday 5th June, 2017 Monday 5th June, 2017 Monday 5th June, 2017 Room: PK 4.1 Multi-disciplinary optimization Chair: Panos Papalambros (University of Michigan, USA) 11:20 11:40 12:00 12:20 12: Cedric Dupont Michel H.J.W. Pass Joan Mas Colomer Tzu Kang Lin Palaniappan Ramu Multidisciplinary System Optimisation on the Design of Cost Effective Space Launch Vehicle Multi-disciplinary Optimization of Body Exterior Structures Static and Dynamic Aeroelastic Scaling of the CRM Wing via Multidisciplinary Optimization Development of a bi-gradation semi-active isolation system with leverage-type controllable friction damper Status of SMO research in India (Bertin Technologies, France) (Ford Motor Company) (ONERA, France) (National Chiao Tung University, Taiwan) (IIT Madras, India) Cedric Dupont, Sophie Missonnier, Andrea Tromba Michel H.J.W. Pass, Hessel C. van Dijk Joan Mas Colomer, Nathalie Bartoli, Thierry Lefebvre, Sylvain Dubreuil, Peter Schmollgruber, Joseph Morlier Zhen-Yu Zhan, Tzu Kang Lin, Palaniappan Ramu, Ananthasuresh G, Ravi Salagame, Vinay Ramanath Room: PK 4.3 Design of Experiments and surrogate models (meta-models) 1 Chair: Christian Gogu (Université de Toulouse, France) 11: Raphael Haftka Predicting B-Basis Allowable at Untested Points from Experiments and Simulations of Plates with Holes (University of Florida, USA) Yiming Zhang, Jaco Schutte, John Meeker, Upul Palliyaguru, Nam Kim, Raphael Haftka 11: Cho Su-gil Response-weighted maximin distance design for multi-sampling (KRISO, Korea) Cho Su-gil, Park Sanghyun, Jang Junyong, Lee Minuk, Min Cheon Hong, Lee Tae Hee 12: Schalk Kok Simple Intuitive Multi-objective Parallelization of Efficient Global Optimization: SIMPLE-EGO (University of Pretoria, South Africa) Carla Grobler, Schalk Kok, Nico Wilke 12: Melina Ribaud Robustness criterion for the optimization schemes based on kriging metamodels (Ecole Centrale, France) Melina Ribaud, Frederic Gillot, Christophette Blanchet-Scaliet, Celine Helbert, Celine Vial Room: PK 4.4 Sizing Chair: Jong Wook Lee (Han Yang University, Korea) 11: Stéphane Grihon Structural sizing optimization capabilities at AIRBUS (Airbus, France) Stéphane Grihon 11: : : : Roxane Van Mellaert (KU Leuven, Belgium) Mate Petrik (University of Miskolc, Hungary) Yanwu Zheng (Beihang University, China) Shenyan Chen (Beihang University, China) Mixed-integer linear programming reformulation approach for global discrete sizing optimization of trussed steel portal frames Roxane Van Mellaert, Kristo Mela, Teemu Tiainen, Markku Heinisuo, Geert Lombaert, Mattias Schevenels Optimization of heat exchangers Mate Petrik, Karoly Jarmai with an automatic mode identification method for tracking local vibration mode Shenyan Chen, Yanwu Zheng, Yanjie Liu Structural Optimization with an Automatic Payload Mass Adjustment Shenyan Chen, Yijie Hu

2 Monday 5th June, 2017 Monday 5th June, 2017 Monday 5th June, 2017 Room: 19.1 Chair: Akihiro Takezawa (Hiroshima University, Japan) 11:20 11:40 12:00 12:20 12: Lothar Harzheim Daniel Milbrath De Leon Jaeeun Yoo Julian Norato Alex Ferrer Comparison of different formulations of a front hood free sizing optimization problem using the ESL-method A study on the design of large displacement compliant mechanisms with a strength criteria using topology optimization Efficient density based topology optimization using dual layer element and variable grouping method for large 3D applications An Improved Aggregation Function for Topology Optimization with Discrete Geometric Elements SIMP-ALL: a generalized SIMP method based on topologicaland shape derivatives (Adam Opel AG, Germany) (Federal University of Rio Grande, Brazil) (KAIST, ADD, Korea) (University of Connecticut, USA) (CIMNE, Spain) Artem Karev, Lothar Harzheim, Rainer Immel, Matthias Erzgraeber Daniel Milbrath De Leon, Juliano Fagundes Gonçalves Jaeeun Yoo, Ikjin Lee Julian Norato, Hesaneh Kazemi Alex Ferrer, Samuel Amstutz, Charles Dapogny Room: 19.2 Chair: Yoon Young (Seoul National University, Korea) Integrated topology optimization of multi-component system considering interface behavior of interconnection based on conforming mesh and Pai Liu 11:20 41 interface elements Pai Liu, Zhan Kang 11:40 12:00 12:20 12: Yaguang Wang Takayuki Yamada Hyundo Shin Zhan Kang Structural topology optimization of coated structures using level set method Level set-based topology optimization for multi-material problems Topological structure design for microwave applications using a new interpolation scheme New advances of manufacturing and interface-related topology optimization problems with implicit geometrical description (Kyoto University, Japan) (Yonsei University, Korea) Yaguang Wang, Zhan Kang Takayuki Yamada, Naoki Kishimoto, Kazuhiro Izui, Shinji Nishiwaki Hyundo Shin, Jeonghoon Yoo Zhan Kang, Pai Liu, Yaguang Wang, Yiqiang Wang Room: 19.4 Chair: Jaan Lellep (Tartu University, Estonia) Luc Laurent Optimal positioning of a wall in an acoustic cavity using reduced models and surrogate based optimization 11: (Conservatoire National des Arts et Métiers, France) Luc Laurent, Antoine Luc 11: : : : Kook Jin Park (Toyota Technological Insitute, Japan) Karol Bolbotowski (Warsaw University of Technology, Poland) Wolfgang Achtziger (University of Erlangen-Nürnberg, Germany) Tong Gao (Northwestern Polytechnical University, China) Buckling optimization design of grid-stiffened shell considering numerical global and local buckling mode with machine learning process Kook Jin Park, Masakazu Kobayashi Grillage layout optimization - theory and numerical methods Karol Bolbotowski, Linwei He, Matthew Gilbert On Classical Problem Formulations of Compliance Minimization and Maximization of Discrete and Discretized Structures --- Material Laws at the Optimum Revisited Wolfgang Achtziger Considering static and quasi-static load-cases (compliance and stress) Topology optimization of continuum structures under the variance constraint of reaction forces Tong Gao, Libin Qiu, Weihong Zhang Topology optimization with density methods 1 Topology optimization with level set methods 1

3 Monday 5th June, 2017 Monday 5th June, 2017 Monday 5th June, 2017 Room: 19.3 Chair: Gil-Ho Yoon (Hanyang University, Korea) 11:20 11: Ayami Sato M. Giselle Fernández-Godino A topology optimization method for molecular gas dynamics based on the Boltzmann equation Optimization as a tool to explore the physics in particle jet formation during explosive dispersal of solid particles (Kyoto University, Japan) (University of Florida, United States) Ayami Sato, So Okamoto, Takayuki Yamada, Kazuhiro Izui, Shinji Nishiwaki, Shigeru Takata M. Giselle Fernández-Godino, Frederick Ouellet, S. Balachandar, Raphael T. Haftka Ram Ranjan Implementation of Turbulent Flow in Topology Optimization 12: (United Technologies Research Center, USA) Ram Ranjan, Matt Pearson, Brian St. Rock Chair: NN 12: : Room: PK 4.1 Noemi Friedman (TU Braunschweig, Germany) Qing Li (The University of Sydney, Australia) Bayesian parameter identification of turbulence model with complex parameter space Noemi Friedman, Elmar Zander, Pradeep Kumar Topographical Optimization for Surface Properties of Materials Qing Li, Hongyi Ren, Ali Entezari 403 Ling Kang Multi-scale Docking Method in Computer-aided Molecular Design 14:00 (Dalian Neusoft University of Information, Ling Kang, Hong Wang, Junfeng Gu China) 404 Hong Wang Parameter Estimation Based on Model Reduction and Kriging Surrogate (Dalian Neusoft University of Information, Hong Wang, Ling Kang China) 15: Room: PK Benyamin Ebrahimi An Augmented Sequential Optimization and Reliability Assessment for Uncertainty-based Multidisciplinary Design Optimization (K.N. Toosi University of Technology, Iran) Mohammad Hosein Farghadani (K.N. Toosi University of Technology, Iran) Chair: Nam-Ho Kim (University of Florida, USA) Including fluid simulation 1 Multi-disciplinary optimization 2 Jafar Roshanian, Ali Asghar Bataleblu, Benyamin Ebrahimi, Ali Akbar Amini Metamodel-based Multidisciplinary Design Optimization of a General Aviation Aircraft Jafar Roshanian, Ali Asghar Bataleblu, Mohammad Hosein Farghadani, Benyamin Ebrahimi Design of Experiments and surrogate models (meta-models) 2 14: Kibong Kang Ankit Chiplunkar Lionel Tomaso A new performance prediction method based on a local metamodel built using large data Gaussian Process for Aerodynamic Pressures Prediction in Fast Fluid Structure Interaction Simulations Automatic selection for general surrogate models (Hanyang Univ., South Korea) (Airbus Operations S.A.S., France) (ANSYS, Inc, France) Kibong Kang, Dong-Hoon Choi Ankit Chiplunkar, Elisa Bosco, Joseph Morlier Malek Ben Salem, Lionel Tomaso Malek Ben Salem Universal prediction distribution for surrogate models 15: (Ecole des mines de St-Etienne (EMSE), ANSYS, Inc., France) Malek Ben Salem, Olivier Roustant, Fabrice Gamboa, Lionel Tomaso 15: Kyeonghwan Kang Efficient Metamodeling Strategy using Multivariate Linear Interpolation for High Dimensional Problems (KAIST, South Korea) Kyeonghwan Kang, Ikjin Lee

4 Monday 5th June, 2017 Monday 5th June, 2017 Monday 5th June, 2017 Room: PK 4.4 Chair: Erik Lund (Linköping University, Sweden) 14: Tsuyoshi Nomura Perle Geoffroy-Donders Christian Carstensen Topology optimization method for variable-axial composite Topological optimization of quasi-periodic structures, by the homogenization method 3D structural topology optimization of wind turbine blades with stiffness and frequency constraints (Toyota Central R&D Labs., Inc., Japan) (Safran, France) (Technical University of Denmark, Denmark) Tsuyoshi Nomura, Atsushi Kawamoto, Tsuguo Kondoh, Axel Spickenheuer, Mario Petrovic, Shinji Nishiwaki Perle Geoffroy-Donders, Grégoire Allaire, Julien Corital, Olivier Pantz Christian Carstensen, Mathias Stolpe, Susana Rojas Labanda, José Pedro Blasques Woven Lattice Materials with Tunable Stiffness and Permeability. Wind tunnel results of optimised material architectures; Topic: Smart Structures Stefan Szyniszewski 15: and Materials (University of Surrey, UK) Stefan Szyniszewski, Manuel Pelacci, Jao Aguero, Yu Liu 15: Haichao An Stacking sequence optimization and blending of composite laminates with a two-level approximation method (Beihang University, China) Haichao An, Hai Huang, Shenyan Chen Room: 19.1 Chair: Fabian Fuerle (Altair Engineering, USA) Oded Amir Satisfying stress constraints in density based topology optimization by length scale control 14: (Technion - Israel Institute of Technology, Israel) Oded Amir, Boyan Lazarov Marine Favre Decloux Pierre Duysinx Topology Optimisation and Reinforcement Derivation Method (RDMÂ ) of a Hybrid Material Sump Definition of reference test cases for stress constrained topology optimization (GRM Consulting, UK) (University of Liege, Belgium) Marine Favre Decloux, Lucy Fusco Pierre Duysinx, Maxime Collet, Erin Kuci, Dirk Munro, Albert Groenwold, Matteo Bruggi Seung-Hyun Ha Topology Optimization with Super-Elliptical Discrete Object Projections 15: (Korea Maritime and Ocean University, Korea) Seung-Hyun Ha 15: Room: 19.2 James Guest (Johns Hopkins University, USA) Chair: Karoly Jarmai (University of Miskolc, Hungary) Projection-based topology optimization: Recent advancements and connections to manufacturing James Guest 14: Peter Dunning Peter Gangl Hiroski Takahashi Length-scale constraints for parameterized implicit function based topology optimization Sensitivity-based design optimization of electric motors Level set-based topology optimization method for the design of a perfectly absorbing metasurface (University of Aberdeen, UK) (RICAM, Austria) (Kyoto University, Japan) Peter Dunning Peter Gangl Hiroski Takahashi, Takayuki Yamada, Shinji Nishiwaki, Kazuhiro Izui H Alicia Kim Global Topology Optimization?: Stochastic Level-Set Method 15: (UC San Diego, USA, Cardiff University, UK) Lester Hedges, H Alicia Kim, Robert Jack 15: Kozo Furuta (Kyoto University, Japan) Fibers and composites optimization 1 Topology optimization with density methods 2 Topology optimization with level set methods 2 Level set-based topology optimization for thermoelectric nanostructures considering the temperature discontinuity, based on the Boltzmann transport equation Kozo Furuta, Ayami Sato, Kazuhiro Izui, Mitsuhiro Matsumoto, Takayuki Yamada, Shinji Nishiwaki

5 Monday 5th June, 2017 Room: 19.4 Chair: Andres Tovar (Purdue University, USA) Considering non-linear effects (e.g. material, geometric, contact) 1 14: Mathias Wallin Optimization of non-linear structures using the tangent stiffness (Lund University, Sweden) Mathias Wallin, Niklas Ivarsson, Daniel Tortorelli 15:00 15: Niclas Strömberg Mengxiao Li Tuo Zhao Hiroya Hoshiba Topology Optimization of Orthotropic Elastic Design Domains with Mortar Contact Conditions Topology optimization of structures with elasto-plastic strain-hardening material modeling An Asymptotic Approach for Nonlinear Topology Optimization Considering Plasticity with the Drucker Prager Model Topology optimization considering large elastoplastic deformation with kinematic hardening behavior (Örebro University, Sweden) (Edinburgh Napier University, UK) (Georgia Institute of Technology, USA) (Tohoku University, Japan) Niclas Strömberg Mengxiao Li, Hexin Zhang, Simon,Ho Fai Wong Tuo Zhao, Adeildo Ramos Jr., Eduardo Lages, Glaucio Paulino Hiroya Hoshiba, Junji Kato Monday 5th June, 2017 Room: 19.3 Chair: Nozomo Kogiso (Osaka Prefecture University, Japan) Including fluid simulation 2 14:00 15:00 15: Zheng Li Casper Schousboe Andreasen Cong Chen Ricardo Amigo Kentaro Yaji Topology Optimization for the Design of Conformal Cooling System in Thin-wall Injection Molding Based on BEM Topology optimization of active transport fluid problems Topology optimization of periodic flows using the local-in-time method and the lattice Boltzmann method Design of Adsorbed Natural Gas Tanks with Metallic Inclusions by Topology Optimisation Optimum channel design of a redox flow battery via topology optimization (Technical University of Denmark, Denmark) (Kyoto University, Japan) (Imperial College London, UK) (Osaka University, Japan) Zheng Li Casper Schousboe Andreasen Cong Chen, Kentaro Yaji, Takayuki Yamada, Kazuhiro Izui, Shinji Nishiwaki Ricardo Amigo, Robert Hewson, Emilio Silva Kentaro Yaji, Shintaro Yamasaki, Shohji Tsushima, Takahiro Suzuki, Kikuo Fujita Monday 5th June, 2017 Room: PK 4.1 Chair: Hideyuki Azegami (Nagoya University, Japan) Multi-disciplinary optimization 3 16:20 16: : : : Julien Pelamatti (ONERA, France) Michael Alexander-Ramos (University of Cincinnati, USA) Shamsheer Chauhan (University of Michigan, USA) Namwoo Kang (KAIST, South Korea) How to deal with discrete variables in integrated MDO framework: an overview of optimization algorithms and MDO formulations Julien Pelamatti, Loïc Brevault, Mathieu Balesdant, El-Ghazali Talbi, Yannick Guerin Multidisciplinary Dynamic System Design Optimization of Plug-in Hybrid Electric Vehicle Powertrains Saeed Azad, Mohammad Sh. Behtash, Arian Houshmand, Michael Alexander-Ramos Comparison between block Gauss-Seidel and Newton approaches for the solution of complex multidisciplinary systems Shamsheer Chauhan, John Hwang, Joaquim Martins Convergence Strategy for Parallel Solving of Analytical Target Cascading with Augmented Lagrangian Coordination Yongsu Jung, Namwoo Kang, Ikjin Lee

6 Monday 5th June, 2017 Room: PK 4.3 Chair: Katharina Witowski (DYNAMore GmbH, Germany) Design of Experiments and surrogate models (meta-models) 3 Surrogate modeling in the design optimization of structures with discontinuous responses with respect to the design variables A new approach Carlo Boursier Niutta 16: to crashworthiness design (Politecnico di Torino, Italy) Carlo Boursier Niutta, Erich Josef Wehrle, Fabian Duddeck, Giovanni Belingardi 16:40 17: Xin Li Marco Tito Bordogna RBF-based High Dimensional Model Representation Method Using Proportional Sampling Strategy Surrogate-based Aeroelastic Optimization for Winglet Planform Design (Beijing Institute of Technology, China) (ONERA, France) Xin Li, Teng Long, G.Gary Wang, Renhe Shi Marco Tito Bordogna, Dimitri Betteghor, Christophe Blondeau, Roeland De Breuker 17: : Ayat Honaramooz (RWTH Aachen, Germany) Tariq Benamara (Cenaero ASBL, Belgium) A surrogate-based optimization using polynomial response surface in collaboration with population-based Evolutionary Algorithm Shima Rahmani, Masoud Ebrahimi, Ayat Honaramouz Multi-fidelity extension to non-intrusive Proper Orthogonal Decomposition models and dedicated surrogate based optimization methodology Tariq Benamara, Piotr Breitkopf, Ingrid Lepot, Caroline Sainvitu Monday 5th June, 2017 Monday 5th June, 2017 Room: PK 4.4 Chair: Pedro Coelho (UNIDEMI-FCT-UNL, Portugal) 16:20 16:40 17:00 17:20 17: Felipe Fernandez F. Farzan Nasab François-Xavier Irisarri Huu Dat Nguyen Philipp Gebhardt Optimal design of fiber reinforced composite structures that arefabricated via additive manufacturing. Generating the best stacking sequence table for the optimization of blended composite structures An optimization strategy for variable-thickness sandwich composite structures Shape optimization of cross sections of composite beams for maximum buckling performance A lean method for local patch reinforcement using principal stress lines (UIUC, USA) (University of Twente, The Netherlands) (ONERA, France) (Sejong University, Korea) (TU Braunschweig, Germany) Felipe Fernandez, James Lewicki, Daniel Tortorelli F. Farzan Nasab, H.J.M. Geijselaers, I. Baran, A. de Boer François-Xavier Irisarri, Cédric Julien, Dimitri Bettebghor, Florian Lavelle, Kevin Mathis Huu Dat Nguyen, Gang-Won Jang Philipp Gebhardt, Eiko Türck, Thomas Vietor Room: 19.1 Chair: James Guest (John Hopkins University, USA) Jihong Zhu Integrated layout and topology optimization design 16: (Northwestern Polytechnical University, China) Jihong Zhu, Weihong Zhang 16: : : : Neung Hwan Yim (Seoul National University, South Korea) Seth Watts (Lawrence Livermore National Laboratory, USA) Pedro Coelho (UNIDEMI-FCT-UNL, Portugal) Yakov Zelickman (Technion - Israel Institute of Technology, Israel) Topology optimization of planar linkage mechanisms involving gear components Neung Hwan Yim, Seok Won Kang, Yoon Young Kim Optimal designs with optimal materials Seth Watts, Daniel Tortorelli Stress analysis and lay-out optimization of composite materials with periodic microstructures Pedro Coelho, José Guedes, Hélder Rodrigues, João Cardoso Topology optimization with stress constraints using isotropic damage with strain softening Yakov Zelickman, Oded Amir Fibers and composites optimization 2 Topology optimization with density methods 3

7 Monday 5th June, 2017 Room: 19.2 Chair: Mathias Stolpe (Technical university of Denmark, Denmark) Topology optimization with level set methods 3 16:20 16:40 17:00 17: Carolina Jauregui Renato Picelli Hélio Emmendoerfer Junior Eduardo Alberto Fancello Fast level set topology optimization using a hierarchical data structure Microscale stress topology optimisation using the level set method Level set topology optimization for design-dependent pressure load problems Stress-constrained level set topology optimization for design-dependent pressure load problems (UC San Diego, USA) (Cardiff University, UK) (University of Sao Paulo, Brazil) (Federal University of Santa Catarina, Brazil) Carolina Jauregui, Alicia Kim Renato Picelli, Raghavendra Sivapuram, Scott Townsend, H. Alicia Kim Hélio Emmendoerfer Junior, Eduardo Alberto Fancello, Emílio Carlos Nelli Silva Hélio Emmendoerfer Junior, Emílio Carlos Nelli Silva, Eduardo Alberto Fancello Peng Wei Parameterized level set-based topology optimization considering symmetry and pattern repetition constraints 17: (South China University of Technology, China) Peng Wei, Zuyu Li Monday 5th June, 2017 Monday 5th June, 2017 Room: 19.4 Chair: Niels Leergaard Pedersen (Technical Univercity of Denmark, Denmark) Shape optimization for frictional contact problems using semi-analytical sensitivity analysis and its application to design of an aero-engine Cao Niu 16: turbine component (Northwestern Polytechnical University, China) Cao Niu, Weihong Zhang 16: : : : Room: 19.3 Daniel Billenstein (University of Bayreuth, Germany) Kurt Maute (University of Colorado Boulder, USA) Hazem Madah (Technion, Israel Institute of Technology, Israel) Peng Hao Chair: Schalk Kok (University of Pretoria, South Africa) Investigation of contact settings on the result of topology optimization to avoid contact stiffness supports Daniel Billenstein, Christian Glenk, Pascal Diwisch, Frank Rieg Level-Set Topology Optimization of Large Deformation Dynamic Contact Problems Kurt Maute, Matthew Lawry Optimal design of skeletal structures exhibiting nonlinear response Hazem Madah, Oded Amir Considering non-linear effects (e.g. material, geometric, contact) 2 Fast Procedure for the Optimization of Stiffened Shells with Cutouts Reinforced by Curvilinearly Stiffeners Peng Hao, Yangfan Li, Kuo Tian, Bo Wang Including manufacturing 1 16:20 16:40 17:00 17: Naoko Ishizuka Yuqing Zhou Dirk Munro Hak Yong Lee Topology optimization for unifying deposit thickness in electroplating process Gradient Multi-Component Topology Optimization of Sheet Metal Structures with Stamping Die Cost Manufacturing Constraint Topology optimization with manufacturing process simulation-based constraints Design of 3D Woven Materials for Enhanced Dynamic Properties (IHI Corporation, Japan) (University of Michigan, USA) (TU Delft, The Netherlands) (Johns Hopkins University, USA) Naoko Ishizuka, Takayuki Yamada, Shinji Nishiwaki Yuqing Zhou, Kazuhiro Saitou Dirk Munro, Can Ayas, Matthijs Langelaar, Fred van Keulen Hak Yong Lee, David Mills, Timothy Weihs, Kevin Hemker, James Guest 17: Saranthip Koh Topology optimization of components and embedded reinforcements using discrete object projection (Johns Hopkins University, USA) Saranthip Koh, James K. Guest

8 Tuesday 6th June, 2017 Room: PK 4.1 Chair: Pascal Etman ( Technische Universiteit Eindhoven, Netherlands) Multi-disciplinary optimization 4 09: Bin Yuan Efficient Global Optimization Strategy Considering Expensive Constraints (Beijing Institute of Technology, China) Bin Yuan, Li Liu, Teng Long, RenHe Shi Christian Lundgaard Topology optimization for fluid-structure-interaction problems 09: (Technical University of Denmark, Denmark) Christian Lundgaard, Joe Alexandersen, Casper Schousboe Andreasen, Mingdong Zhou, Ole Sigmund 09: : :20 12 Joung Taek Yoon (Seoul National University, Republic of Korea) Kirill Balunov (TsAGI, Russia) Mingdong Zhou (Shanghai Jiao Tong University, China) A New Resilience-Driven System Design Considering False Alarms Joung Taek Yoon, Minji Yoo, Byeng D. Youn, Yunhan Kim Bi-level approach to structural optimization of aircraft wing with stress and flutter constraints Kirill Balunov, Vasily Chedrik Shape Optimization of Fully Stressed Design and Channel Flow Problems by Explicit Boundary Tracking Mingdong Zhou, Haojie Lian, Niels Aage, Ole Sigmund Tuesday 6th June, 2017 Room: PK 4.3 Chair: Bo Wang Geometry modelling aspects 1 Peter M. Clausen CAD-reconstruction of non-parametric optimizations 09:00 65 (Dassault Systèmes Deutschland, Germany) Peter M. Clausen, Arnaud Deslandes, Claire Fritz-Humblot 09: : : : Daniel Baumgärtner (Technical University of Munich, Germany) Armin Geiser (Technical University of Munich, Germany) Malte Woidt (TU Braunschweig, Germany) Reinier van Dijk (ParaPy B.V., The Netherlands) Integration of node-based shape optimization in computer-aided design workflows Daniel Baumgärtner, Armin Geiser, Kai-Uwe Bletzinger Assessment of filter properties and the numerical treatment in context of Vertex Morphing. Armin Geiser, Daniel Baumgärtner, Roland Wüchner, Kai-Uwe Bletzinger Topology optimization of incompatible isogeometric stiffened structuresusing evolutionary algorithms Malte Woidt, Kay Sommerwerk, Matthias Haupt, Peter Horst ParaPy: a Knowledge Based Engineering Framework built on Python Reinier van Dijk, Bram Timmer Tuesday 6th June, 2017 Room: PK 4.4 Chair: Helder Rodrigues (Universidade de Lisboa, Portugal) Fibers and composites optimization 3 09:00 09:20 09:40 10:00 10: Erik Lund Gareth Vio Sascha Dähne Elin Andersen Zhi Sun On penalization strategies for failure indices in Discrete Material and Thickness Optimization problems Dealing with probabilistic uncertainty in aeroelastic composite optimisation using Random Matrix Theory Gradient based structural optimization of a stringer stiffened composite wing box with variable stringer orientation The concept of Free Beam Section Optimization Bionic sandwich structures design with hybrid core based on topological optimization under multiple constraints (Aalborg University, Denmark) (University of Sydney, Australia) (German Aerospace Center, Germany) (University of Stavanger, Norway) Erik Lund Aditya Vishwanathan, Gareth Vio, David Munk Sascha Dähne, Christian Hühne Elin Andersen, José Pedro Blasques, Alemseged Gebrehiwot Weldeyesus, Mathias Stolpe Dong Li, Zhi Sun, Weisheng Zhang, Shanshan Shi, Haoran Chen, Xu Guo

9 Tuesday 6th June, 2017 Tuesday 6th June, 2017 Tuesday 6th June, 2017 Room: 19.1 Chair: Lothar Harzheim (Adam Opel AG, Germany) 09:00 09: Narindra Ranaivomiarana Kazem Ghabraie Simultaneous topology optimization of material density and anisotropy A simple approach to deal with zero densities in topology optimisation (Onera, France) (Deakin University, Australia) Narindra Ranaivomiarana, François-Xavier Irisarri, Dimitri Bettebghor, Boris Desmorat Kazem Ghabraie 09: : : Room: 19.2 Wares Chancharoen (Nagoya University, Japan) Max van der Kolk (Delft University of Technology, The Netherlands) Lise Noël (KU Leuven, Belgium) Chair: Kurt Maute (University of Colorado, USA) Topology Optimization of Density Type for Linear Elastic Body Using the Second Derivative of KS function with Respect to the von Mises Stress Wares Chancharoen, Hideyuki Azegami Using exact particular solutions and modal reduction in topology optimization of transient thermo-mechanical problems. Max van der Kolk, Matthijs Langelaar, Fred van Keulen Designing metamaterials for enhanced noise and vibration properties Lise Noël, Claus Claeys, Elke Deckers, Wim Desmet 09: : : : : Room: 19.4 Lukas Jakabcin (Ecole polytechnique, France) Grégoire Allaire (CMAP, Ecole Polytechnique, France) Xu Guo Weisheng Zhang Chang Liu Chair: Fabian Duddeck (TU München, Germany) Topology optimization of structures by the level set method taking into account thermal residual stresses induced by additive manufacturing. Lukas Jakabcin, Grégoire Allaire A model of layer by layer mechanical constraint for additive manufacturing in shape and topology optimization Grégoire Allaire, Charles Dapogny, Alexis Faure, Georgios Michailidis Self-supporting structure design in additive manufacturing through Moving Morphable Component/Void (MMC/MMV) based explicit topology optimization Xu Guo, Jianhua Zhou, Weisheng Zhang Explicit three dimensional topology optimization via Moving Morphable Component/Void (MMC/MMV) approach Weisheng Zhang, Jishun Chen, Xu Guo A new approach for designing graded lattice/porous structures based on Moving Morphable Component/Void (MMC/MMV) topology optimization framework Chang Liu, Weisheng Zhang, Xu Guo Daniel Cunha Evolutionary topology optimization of geometrically nonlinear structures under topology dependent loads 09:00 51 (State University of Campinas, Brazil) Daniel Cunha, Renato Pavanello Topology Optimization of a Box-beam Structure Considering Crash Loadings and Rate-dependent Nonlinear Material Behaviors and Using Cheol Kim 09:20 83 Equivalent Static Loads (Kyungpook National University, South Korea) Mohammadmahdi Davoudi, CHEOL KIM 09: : :20 57 Daniel Tortorelli (Lawrence Livermore National Laboratory, USA) Jorge Barrera Cruz (University of Colorado, Boulder, USA) Yangjun Luo Optimization of periodic cells for nonlinear response Daniel Tortorelli, Mathias Wallin,, Niklas Ivarsson Topology optimization with density methods 4 Topology optimization with level set methods 4 (additiv manufacturing) Considering non-linear effects (e.g. material, geometric, contact) 3 Topology Optimization of Elastomeric Gels with Internal State Variable Dependancies in the Sensitivity Analysis Jorge Barrera Cruz, Kurt Maute Layout optimization of cable-suspended membrane structures for wrinkle-free design Yangjun Luo, Yanzhuang Niu, Ming Li, Zhan Kang

10 Tuesday 6th June, 2017 Tuesday 6th June, 2017 Tuesday 6th June, 2017 Room: 19.3 Chair: Sierk Fiebig (Volkswagen Group, Germany) Andres Tovar Multiscale, thermomechanical topology optimization of cellular structures for porous injection molds 09:00 37 (Indiana University-Purdue, University Indianapolis, USA) Tong Wu, Doyle Hewitt, Kim Brand, Andres Tovar 09:20 09:40 10:00 10: Yuki Sato Riccardo Cenni Thilo Franke Quhao Li A fictitious physical model-based geometrical constraint in topology optimization for molding and milling Multidisciplinary shape optimization of ductile iron castings by considering local microstructure and material behaviour Topology optimization with integrated casting simulation and parallel manufacturing process improvement Virtual-Temperature-Method Based Formulation of Topology Optimization for Design of Cast Parts (Kyoto University, Japan) (SACMI IMOLA S.C., Italy) (Volkswagen AG, Germany) Yuki Sato, Takayuki Yamada, Kazuhiro Izui, Shinji Nishiwaki Jakob Olofsson, Riccardo Cenni, Matteo Cova, Giacomo Bertuzzi, Kent Salomonsson, Joel Johansson Thilo Franke, Sierk Fiebig, Karsten Paul, Thomas Vietor, Jürgen Sellschopp Quhao Li, Wenjiong Chen, Shutian Liu Room: PK 4.1 Chair: Axel Schumacher (Bergische Universität Wuppertal, Germany) 11:20 11:40 12:00 12:20 12: David Munk Łukasz Jankowski Namhee Ryu Andrew Gaynor Dawei Zhan Producing smart Pareto sets for multi-objective topology optimization problems Multicriterial optimization of geometrical and structural properties of the basic module for a single-branch Truss-Z structure Multi-objective Optimization Using Adaptive Weight Determination Scheme Based on Concept of Hyperplane Topology Optimization for the design of Structural Capacitors: Light-Weighting Unmanned Autonomous Systems Parallel multi-objective expected improvement criteria for expensive multi-objective optimization (The University of Sydney, Australia) (Polish Academy of Sciences, Poland) (Hanyang University, South Korea) (U.S. Army Research Laboratory, USA) (Huazhong University, China) David Munk, Gareth Vio, Grant Steven Machi Zawidzki, Łukasz Jankowski Namhee Ryu, Seungjae Min Andrew Gaynor, Raymond Wildman Dawei Zhan, Jiachang Qian, Jun Liu, Yuansheng Cheng Room: PK 4.3 Chair: Kai-Uwe Bletzinger (TU München, Germany) Including manufacturing 2 (casting) Multi-objective optimization Geometry modelling aspects 2 11:20 17 Daniel White Topological Optimization in Fourier Space (LLNL, USA) Daniel White, Mark Stowell Nick Stoppelkamp Concepts to couple CAD and non-parametric shape optimization 11:40 79 (Dassault Systèmes Deutschland GmbH, Germany) Nick Stoppelkamp, Peter M. Clausen, Ekaterina Kovacheva Michael Werner A Platform Approach for Topology Optimization to Overcome the Gap between Geometry and Simulation 12:00 87 (Dassault Systèmes Deutschland GmbH, Germany) Michael Werner, Gergana Dimitrova Deepak Gupta Numerical artefacts in topology optimization approaches involving decoupled analysis and design discretizations 12: (Delft University of Technology, The Netherlands) Deepak Gupta, Matthijs Langelaar, Fred van Keulen 12: Kengo Uehara Optimum morphing shape design for morphing wing with corrugated structure using RBF network (Osaka Prefecture University, Japan) Gen Nakamura, Kengo Uehara, Nozomu Kogiso, Tomohiro Yokozeki

11 Tuesday 6th June, 2017 Tuesday 6th June, 2017 Tuesday 6th June, 2017 Room: PK 4.4 Chair: Niels Olhoff (Aalborg University, Denmark) 11:20 11:40 12:00 12:20 12: Matteo Bruggi Yoshiaki Muramatsu Tobias Bach Mario Petrovic Felix Ospald Optimal design of the fiber-reinforcement of no-tension masonry walls Optimization approach for free-orientation of a laminated shell structure with orthotropic material of stiffened composite panels for highly flexible aircraft wings Orthotropic Material Orientation Optimization and Manufacturing in Composite Structures SIMP based Topology Optimization for Injection Molding of SFRPs (Politecnico di Milano, Italy) (Toyota Technological Institute, Japan) (DLR - German Aerospace Center, Germany) (Kyoto University, Japan) (TU Chemnitz, Germany) Matteo Bruggi, Alberto Taliercio Yoshiaki Muramatsu, Masatoshi Shimoda Tobias Bach Mario Petrovic, Tsuyoshi Nomura, Norio Tada, Takaaki Takahashi, Shinji Nishiwaki, Kazuhiro Izui Felix Ospald, Roland Herzog Room: 19.1 Chair: Martin Bendsoe (Technical University oof Denmark, Denmark) 11:20 11: Gil Ho Yoon Eddie Wadbro A new topology optimization method for non-matching elements using variable node element On length scale control in topology optimization (Hanyang University, South Korea) (Umeå University, Sweden) Gil Ho Yoon, Chung Hee Yoon Eddie Wadbro, Linus Hägg 12:00 12: : Room: 19.2 Alessandro Beghini (SOM, USA) David Weinberg (Autodesk Inc., USA) Janos Logo (Budapest University, Hungary) Chair: Fabian Wein (Friedrich-Alexander-Universität Erlangen-Nürnberg, Germany) Optimal Tendon Layouts for Concrete Slabs in Buildings derived through Density-Based Topology Optimization Algorithms Mark Sarkisian, Eric Long, Alessandro Beghini, Rupa Garai, Ricardo Henoch, Abel Diaz Challenges in implementing topology optimization to established commercial software David Weinberg, Nam H. Kim Topology Optimization at the first half of the XX. century Janos Logo Hao Xu Optimization and Design of Supporting Legs on TianTuo-3 Microsatellite 11:20 20 (National University of Defense Technology, China) Hao Xu, Yong Zhao, Wen Yao, Ning Wang, BingXiao Du 11: : : : Xuan Zhang (Kobe University, Japan) Ke Liu (Georgia Institute of Technology, USA) Yuki Noguchi (Kyoto University, Japan) Monika Mazur (Cracow University of Technology, Poland) Fibers and composites optimization 4 Topology optimization with density methods 5 Topology optimization with other methods 1 Dynamic Behavior of Hanging Truss Having Shape Memory Alloy Wires(From the optimization viewpoint of vibration isolation and absorption) Xuan Zhang, Kazuyuki Hanahara, Yukio Tada Tensegrity Topology Optimization by Force Maximization on Arbitrary Ground Structures Ke Liu, Glaucio H. Paulino Level set-based topology optimization for a soundproofing acoustic metasurface using Zwickerâ s loudness model Yuki Noguchi, Kohei Miyata, Takayuki Yamada, Kazuhiro Izui, Shinji Nishiwaki A novel heuristic generator of structural topologies based on sorted compliances Monika Mazur, Katarzyna Tajs-Zielinska, Bogdan Bochenek

12 Tuesday 6th June, 2017 Tuesday 6th June, 2017 Tuesday 6th June, 2017 Room: 19.4 Chair: Daniel Tortorelli (Lawrence Livermore Natl. Lab, USA) Considering non-linear effects (e.g. material, geometric, contact) 4 Pauli Pedersen Optimization of 3D bifurcation stability 11:20 25 (Technical Univercity of Denmark, DTU, Denmark) Pauli Pedersen, Niels Leergaard Pedersen Niels Leergaard Pedersen Optimization of bolted flanges 11:40 26 (Technical University of Denmark, DTU, Denmark) Niels Leergaard Pedersen 12:00 12:20 12: David Ruiz Niharika Gupta Haitao Ma Optimal design of robust piezoelectric unimorph microgripper under large displacement Optimization of Width-Profiles of Bistable Arches An Adaptive Continuation Method for Structural Topology Optimization Considering Buckling Constraints (Universidad de Castilla-La Mancha, Spain) (Indian Institute of Science, India) (Guangzhou University, China) David Ruiz, Ole Sigmund Niharika Gupta, Safvan Palathingal, G.K. Ananthasuresh Xingjun Gao, Haitao Ma Room: 19.3 Chair: Jianbin Du (Tsinghua University, China) Integration of material models (micro-/nano-structures) 11:20 11:40 12: Jin-Xing Shi Byungseong Ahn Liang Xu Shape and structural design optimization of graphene sheets in natural vibration problem Topology Optimization of Anisotropic Metamaterials to Realize the Desired EFC and Field Polarization Two-scale concurrent topology optimization with multiple micro materials based on principal stress direction (Toyota Technological Institute, Japan) (Seoul National University, South Korea) Jin-Xing Shi, Keiichiro Ohmura, Masatoshi Shimoda Byungseong Ahn, Hyung Jin Lee, Yoon Young Kim Liang Xu, Gengdong Cheng Resolution enhancement of 3-D quantitative computed tomography image for proximal femur by using analogy between topology optimization Jung Jin Kim 12: and phenomenological bone remodeling. (KAIST, South Korea) Jung Jin Kim, In Gwun Jang 12: Atsushi Kawamoto Imaging and pattern formation for vector fields using partial differential equations (Toyota Central R&D Labs., Inc., Japan) Atsushi Kawamoto, Tsuyoshi Nomura, Tsuguo Kondoh, Mario Petrovic, Shinji Nishiwaki Room: PK 4.1 Chair: Byeng Dong Youn (Seoul National University, Korea) Uncertainty and robust design 1 Sang-Hyeon Choi Improved sequential optimization and reliability assessment for reliability-based design optimization 14: (Korea Aerospace Research Institute, South Korea) Sang-Hyeon Choi, Ikjin Lee 15:00 15: Christian Gogu Makoto Ito Jaehyeok Doh Yutian Wang Accelerating sampling based methods for reliability analysis through on the fly reduced order modeling Conceptual design of displacement magnifying mechanism considering epistemic and aleatory uncertainty Reliability Based Design Optimization of The Gap Size of Annular Nuclear Fuelsin Pressurized Water Reactor (PWR) Improved adaptive-loop method for non-probabilistic reliability-based design optimization (Universite Toulouse III, ICA, France) (Osaka Prefecture University, Japan) (Yonsei University, Republic of Korea) Christian Gogu, Anirban Chaudhuri, Christian Bes Makoto Ito, Nozomu Kogiso Jaehyeok Doh, Jongsoo Lee Yutian Wang, Peng Hao, Chen Liu, Fangzhou Wu, Bo Wang

13 Tuesday 6th June, 2017 Tuesday 6th June, 2017 Tuesday 6th June, 2017 Room: PK 4.3 Chair: Franz-Joseph Barthold (TU Dortmund, Germany) 14: Mauricio Aristizabal Hiroshi Isakari An introduction to the OTI method to efficiently compute n-order derivatives A gradient-based topology optimisation for radar cross sections in two-dimensional acoustics (Universidad EAFIT, Colombia) (Nagoya university, Japan) Mauricio Aristizabal, Manuel Garcia, Harry Millwater Hiroshi Isakari, Toru Takahashi, Toshiro Matsumoto : : Room: PK 4.4 Kenta Nakamoto (Nagoya University, Japan) David Sandler (Virginia Tech, USA) Jan Liedmann (TU Dortmund, Germany) Chair: Carlto Cinquini (University of Pavia, Italy) A topology optimisation of wave absorbers in two-dimentional electro-magnetic field with an accelerated BEM by the H-matrix method Kenta Nakamoto, Hiroshi Isakari, Toru Takahashi, Toshiro Matsumoto Continuum Shape Sensitivity Analysis for Fluid-Structure Interaction using an Arbitrary Lagrangian-Eulerian Reference Frame David Sandler, Robert Canfield Design Exploration based upon Internal Structure of Materially Nonlinear Response Sensitivities Jan Liedmann, Franz-Joseph Barthold 14: Jaan Lellep Erin Kuci Optimization of stepped plates in the elastic plastic range Shape Optimization of Electric Drives based on the Lie Derivative (Tartu University, Estonia) (University of Liege, Belgium) Jaan Lellep, Julia Polikarpus Erin Kuci, François Henrotte, Christophe Geuzaine, Pierre Duysinx 15:00 15: Sierk Fiebig Daniel N. Wilke Safvan Palathingal Bead optimization with a Genetic Algorithm for reducing mechanical stresses in weldseams Geometric design of SAG mill lifter bars utilizing the discrete element method Optimization of Bistable Shallow-thin Shells without Pre-stress (Volkswagen AG, Germany) (University of Pretoria, South Africa) (Indian Institute of Science, India) Sierk Fiebig Daniel N. Wilke, Nicolin Govender, Patrick Pizette Safvan Palathingal, G. K. Ananthasuresh Room: 19.1 Chair: Michael Stingl (Friedrich-Alexander-Universität Erlangen-Nürnberg, Germany) Sensitivity analysis 1 Shape optimization 1 Topology optimization with density methods 6 Emad Shakour Simultaneous shape and topology optimization of prestressed concrete beams 14: (Technion - Israel Institute of Technology, Israel) Emad Shakour, Oded Amir 15:00 15: Eduardo Fernández Guilian Yi Po Ting Lin Pingzhang Zhou Contributions to handle maximum size constraints in density-based topology optimization Phononic Band Gap Maximization for Broadband Energy Harvesting around A Target Driving Frequency Investigation and Comparison of Alternative Material Property Models for Density-based Topology Optimization Topology optimization of freely vibrating continuum structures based on nonsmooth optimization (University of Liège, Belgium) (Seoul National University, South Korea) (National Taiwan University, Taiwan) (Tsinghua University, China) Eduardo Fernández, Maxime Collet, Simon Bauduin, Etienne Lemaire, Pierre Duysinx Guilian Yi, Yong Chang Shin, Heonjun Yoon, Soo-Ho Jo, Byeng D. Youn Mark Christian E. Manuel, Po Ting Lin Pingzhang Zhou, Jianbin Du, Zhenhua Lv

14 Tuesday 6th June, 2017 Tuesday 6th June, 2017 Tuesday 6th June, 2017 Room: 19.2 Chair: Julian Norato (University of Connecticut, USA) Vu Truong Vu Modifications of bi-directional evolutionary structural optimization for structure compliance 14:00 24 (Ho Chi Minh City University of Transport, Vietnam) Vu Truong Vu, Duy Minh Do 15:00 15: Tomasz Lewiński Eilam Amir Meisam Takalloozadeh Akshay Desai Constrained versions of the free material design methods and their applications in 3D printing Efficient High Resolution Topology Optimization using Beam Modeling Designing Micro-structures with Negative Poisson s Ratio by Utilizing Topological Derivative in MMC Framework Optimal Topology of Heat-exchanging Fin using Topological Derivative (Warsaw University of Technology, Poland) (Technion, Israel) (Hanyang University, South Korea) (Indian Institute of Science, India) Tomasz Lewiński, Sławomir Czarnecki, Radosław Czubacki, Tomasz Łukasiak, Paweł Wawruch Eilam Amir, Oded Amir Meisam Takalloozadeh, Gil Ho Yoon Akshay Desai, G.K. Ananthasuresh Room: 19.4 Chair: Dong Wang (Northwestern Polytechnical University, China) 14:00 15:00 15: Jianbin Du Paolo Venini Susana Rojas Labanda Niels Olhoff Narayanan Pagaldipti Multi-objective topological design of support structure for active vibration isolation Innovative norm-based approaches to optimization of dynamic systems Simultaneous Analysis and Design formulation for sizing optimization problems under many dynamic loads Topological Design of Vibro-Acoustic Structures using a Generalized Incremental Frequency Method Sensitivity Analysis of Eigenvectors, Response Spectrum Displacements and Stresses (Tsinghua University, China) (University of Pavia, Italy) (DTU Wind Energy, Denmark) (Aalborg University, Denmark) (Altair Engineering, USA) Pingzhang Zhou, Jianbin Du, Zhenhua Lv Paolo Venini, Carlo Cinquini Susana Rojas Labanda, Mathias Stolpe Niels Olhoff, Jianbin Du Narayanan Pagaldipti, Shaobin Liu, Xueyong Qu, Raphael Fleury Room: 19.3 Chair: Alberto Donoso (Universidad de Castilla-La Mancha, Spain) Topology optimization with other methods 2 Considering dynamic load-cases 1 Considering piezoelectricity, magnetic and electrical fields 14: Johannes Semmler Jayachandran K P Material Optimization in Transverse Electromagnetic Applications Enhanced coupling in magnetoelectric composites by material design (Universitaet Erlangen-Nuernberg, Germany) (University of Lisbon, Portugal) Johannes Semmler, Lukas Pflug, Michael Stingl Jayachandran K P, Jose Guedes, Helder Rodrigues 15: Katsuya Nomura Hiroki Bo Topology optimization of Power Semiconductor Devices Conductor layout optimization for reducing the magnetic coupling noise of a filter circuit board (Toyota Central R&D Labs., Inc., Japan) (Osaka University, Japan) Katsuya Nomura, Tsuguo Kondoh, Tsuyoshi Ishikawa, Shintaro Yamasaki, Yaji Kentaro, Kikuo Fujita Hiroki Bo, Shintaro Yamasaki, Kentaro Yaji, Katsuya Nomura, Atsuhiro Takahashi, Kikuo Fujita 15: Shun Maruyama (Osaka university, Japan) Integrated design of permanent magnet synchronous motor by incorporating magnet layout and yoke topology optimizations Shun Maruyama, Shintaro Yamasaki, Kentaro Yaji, Kikuo Fujita

15 Room: PK 4.1 Chair: Ikjin Lee (Korea Advanced Institute of Science and Technology, Korea) 09:00 09: Huile Zhang Nam H. Kim Multi-objective reliability-based design optimization for vehicle structures coupled process-performance Optimization with Bayesian Network by changing design and epistemic variables (Hunan University, China) (University of Florida, USA) Huile Zhang, Guangyong Sun, Guangyao Li, Qing Li Sangjune Bae, Nam H. Kim, Seung-gyo Jang Guesuk Lee A Comprehensive Study of Calibration Metrics for Optimization-Based Model Calibration 09: (Seoul National University, Republic of Korea) Guesuk Lee, Guilian Yi, Byeng D. Youn 10: : Room: PK 4.3 Geoffrey Oxberry (Lawrence Livermore National Laboratory, USA) Gang Li Chair: Ramana Grandhi (Wright State University, USA) Average-worst-case topology optimization using stochastic programming and Conditional Value-at-Risk Geoffrey Oxberry, Cosmin Petra, Mark Stowell, Andrew Barker, Dan White, Dan Tortorelli An evolution-gradient based hybrid reliability analysis method by MOEA/D and ACC Gang Li, Bin Li, Hao Hu 09:00 09:20 09:40 10: Claus B.W. Pedersen José Carlos Bellido Franz-Joseph Barthold Timothée Achard Latest Developments for Industrial Adjoint Sensitivity Analysis and Non-Parametric Optimization Eigenmode optimization revisited A modified extended finite element method applied to control interfaces and cracks High-Fidelity Aero-Structure Gradient Computation Technique with application to the CRM Wing Design. (Dassault Systemes SIMULIA, Germany) (Universidad de Castilla-La Mancha, Spain) (TU Dortmund, Germany) (Onera, France) Claus B.W. Pedersen, Kingshuk Bose, Michael Wood, Vladimir Belsky José Carlos Bellido, David Ruiz, Alberto Donoso Franz-Joseph Barthold, Felix Ermen Timothée Achard, Christophe Blondeau, Roger Ohayon Qi Xia Sensitivity analysis through constrained variational principle and its application in optimization of thermal actuator 10:20 32 (Huazhong University of Science and Technology, China) Qi Xia, Tielin Shi Room: PK 4.4 Chair: Daniel Tortorelli (Lawrence Livermore Natl. Lab, USA) 09:00 09: Mamoru Wakasa Anders Bernland Thickness and shape optimization of a shell structure for transient response control Level Set Based Shape Optimization using Cut Finite Elements in Acoustics (Toyota Technological Institute, Japan) (Umeå University, Sweden) Mamoru Wakasa, Masatoshi Shimoda Anders Bernland, Eddie Wadbro, Martin Berggren Eduard Rohan Shape optimization for microstructure design of porous materials described by the Biot model in the homogenization framework 09: (University of West Bohemia, Czech Republic) Eduard Rohan, Daniel Huebner, Vladimir Lukes, Michael Stingl 10: :20 9 Wojciech Kijanski (TU Dortmund, Germany) Ming Li Uncertainty and robust design 2 Sensitivity analysis 2 Shape optimization 2 Design of micro-structures using methods from shape optimisation Wojciech Kijanski, Franz-Joseph Barthold Spline-based design optimization of fir-tree root in turbine structures Ming Li, Fengwei Li, Deqi Yu

16 Room: 19.1 Chair: Xiaoping Qian (UW-Madison, USA) Topology optimization with density methods 7 09: : : : : Anders Klarbring (Linköping University, Sweden) Jong Wook Lee (Han Yang University, Korea) Josephine Carstensen (Johns Hopkins University, USA) Andrzej Myśliński (Systems Research Institute, Poland) Jun Yan On a Nash game formulation for robust structural optimization and its numerical solution using a decomposition method Henrik Alm Grundström, Carl-Johan Thore, Anders Klarbring Topology optimization method for the laminate structure using the layerwise theory Jong Wook Lee, Gil Ho Yoon Multi-Material Topology Optimization of Periodic Cellular Materials Josephine Carstensen, James Guest Multimaterial Topology Optimization of Contact Problems using Allen-Cahn Approach Andrzej Myśliński Stress-based multiscale topology optimization with self-adaptive cluster cells of lattice structure Jun Yan, Zhenchao Gao, Da Geng, Tao Yu Room: 19.2 Chair: Mathias Wallin (Lund University, Sweden) Topology optimization with other methods 3 09:00 09: Vasily Chedrik Helen Fairclough based on stress constrained topology optimization Layout Optimization of Frames in the Presence of Self-Weight: A New Formulation (TsAGI, Russia) (University of Sheffield, United Kingdom) Vasily Chedrik, Sergei Tuktarov Helen Fairclough, Matthew Gilbert, Andy Tyas, Aleksey Pichugin 09: : : Tomasz Lukasiak (Warsaw University of Technology, Poland) Simone Coniglio (ICA/ISAE-Supaero/Airbus, France) Linwei He (University of Sheffield, United Kingdom) Macroscopically isotropic and cubic-isotropic two-material periodic structures constructed by the inverse-homogenization method. Tomasz Lukasiak Pylon and engine mounts performance driven structural topology optimization Simone Coniglio, Christian Gogu, Rémi Amargier, Joseph Morlier Human-in-the-loop layout and geometry optimization of structures and components Linwei He, Matthew Gilbert, Tom Johnson, Chris Smith Room: 19.4 Chair: Jose Carlos Bellido (Universidad de Castilla-La Mancha, Spain) Considering dynamic load-cases 2 09:00 09: : : : Niklas Ivarsson (Lund University, Sweden) Marius Bierdel (Fraunhofer EMI, Germany) Jaesoon Jung (Gwangju Institute of Science and Technology, South Korea) Bin Niu Dynamic topology optimization based on finite strain visco-plasticity Niklas Ivarsson, Mathias Wallin, Daniel Tortorelli Multidisciplinary Design Optimization of a Satellite Structure by Additive Manufacturing Marius Bierdel Optimal topology design of locally resonant metamaterial with plate-like resonator Jaesoon Jung, Seongyeol Goo, Semyung Wang Design optimization of tunable locally resonant elastic metamaterials Bin Niu, Xiaolong Liu, Rui Yang