Score out of 4. Tell whether each figure appears to be a reflection or translation. If it is neither, write none

Size: px
Start display at page:

Download "Score out of 4. Tell whether each figure appears to be a reflection or translation. If it is neither, write none"

Transcription

1 Wkst Reflections & Translations Name Geometry Regular Date Mod Score out of 4 Tell whether each figure appears to be a reflection or translation. If it is neither, write none Reflect the figure with the given vertices across the given line

2 Translate the figure with the given vertices along the given vector Leigh and Derek are tossing a Frisbee. Leigh stands at (2, 5) and throws the disc to Derek at (11, 0). Find the translation vector from Leigh to Derek. 20. Bob the builder is trying to level out some dirt. He picks up some excess dirt at (9, 16) and maneuvers through the job site along the vectors -6, 0, 2, 5, and 8, 10 to get to the spot to unload the dirt. Find the coordinates of the unloading point. Find a single vector from the loading point to the unloading point.

3 Wkst 9.3 & 9.6 Rotations & Dilations Name Geometry Regular Date Mod Score out of 4 Tell whether each figure appears to be a rotation or dilation. If it is neither, write none Rotate the figure with the given vertices about the origin with the given angle of rotation

4 Draw the image of the figure with the given vertices under a dilation with the given scale factor centered at the origin A sign painter creates a rectangular sign for Hermey s Dentist Office on his computer desktop. The desktop version is 12 inches by 4 inches. The actual sign will be 15 feet by 5 feet. If the capital H in Hermey s will be 4 feet tall, find the height of the H on his desktop version.

5 WS 9.4 Compositions of Transformations Name Geometry Regular Date Mod Score out of 4 Draw the result of each composition of transformations

6 Each of the following is a face of the cube shown below. In the space to its right, make a sketch of the face of the cube that is directly opposite the given face. a. b.

7 Worksheet 9.5 Symmetry Name Geometry Regular Date Mod Score out of 4 Tell whether each figure has line symmetry. If so, draw all lines of symmetry Tell whether each figure has rotational symmetry. If so, give the angle of rotational symmetry and the order of symmetry

8 Tell whether each figure has plane symmetry, symmetry about an axis, both, or neither Draw all lines of symmetry for each name if possible.

9 Worksheet Transformations Geometry Regular Name Date Mod What would happen to the figures below if they were reflected across two vertical lines? Perform the transformation to find out. Now reflect your drawing across line l. l Describe the images you drew after reflecting over the two vertical lines. Is there another transformation that will produce the same images in one step? Describe the images you drew after reflecting over line l.

10 Draw a 90 rotation and a horizontal reflection of each image. Decide whether each transformation is rotation, reflection, or translation.

11 Look at the figure in the far left column. Then find and circle the figure (a, b, or c) that is congruent to the first. Was the congruent figure reflected, rotated, or translated? The shaded figure can be rotated different ways. Shade the other figures to show how the first can be rotated. What transformation can you perform to show that the two figures are congruent?

12 Which of the capital letters below can be reflected across a vertical line and still look the same? Circle them. A B C D E F G H I J K L M N O P Q R S T U V W X Y Z Examine the regular pentagon below. Suppose it undergoes a dilation with a scale factor of 4.5 a. How long is each side of the new image? b. Are the two images similar? Justify your answer. c. Do you think all dilations produce similar figures? Why or Why not? Graph the coordinates in the first column. Translate the images by graphing the coordinates in the second and third columns. Write a translation vector that will allow you to translate from the first image to the third image. Translation vector Use the space below to draw a SCHOOL-APPROPRIATE image. Find a partner and have him or her reflect that image across a vertical line.

Name: Period: 2018 Geometry Spring Final Exam Review

Name: Period: 2018 Geometry Spring Final Exam Review 2018 Geometry Spring Final Exam Review 1. Find the number of lunch combinations that can be created if you order a soup, sandwich, drink and dessert. There are 4 soup choices, 5 sandwich choices, 3 drink

More information

Math 9: Chapter Review Assignment

Math 9: Chapter Review Assignment Class: Date: Math 9: Chapter 7.5-7.7 Review Assignment Multiple Choice Identify the choice that best completes the statement or answers the question. 1. Which shapes have at least 2 lines of symmetry?

More information

Content Standards G.CO.4 Develop definitions of rotations, reflections, and translations in terms of angles, circles, perpendicular lines, parallel

Content Standards G.CO.4 Develop definitions of rotations, reflections, and translations in terms of angles, circles, perpendicular lines, parallel Content Standards G.CO.4 Develop definitions of rotations, reflections, and translations in terms of angles, circles, perpendicular lines, parallel lines, and line segments. G.CO.5 Given a geometric figure

More information

Archdiocese of Washington Catholic Schools Academic Standards Mathematics

Archdiocese of Washington Catholic Schools Academic Standards Mathematics 5 th GRADE Archdiocese of Washington Catholic Schools Standard 1 - Number Sense Students compute with whole numbers*, decimals, and fractions and understand the relationship among decimals, fractions,

More information

Common Core. Mathematics Instruction

Common Core. Mathematics Instruction 014 Common Core Mathematics Instruction 7 Part 1: Introduction rea of Composed Figures Develop Skills and Strategies CCSS 7.G.B.6 In previous grades you learned that you can find the area of many different

More information

Section 5: Introduction to Polygons Part 2

Section 5: Introduction to Polygons Part 2 Section 5: Introduction to Polygons Part 2 Topic 1: Compositions of Transformations of Polygons Part 1... 109 Topic 2: Compositions of Transformations of Polygons Part 2... 111 Topic 3: Symmetries of Regular

More information

Similarity Review (Unit 4)

Similarity Review (Unit 4) Similarity Review (Unit 4) Name Using a compass and straightedge construct the image of the figure after a dilation with point C as the center of dilation and the given scale factor. Label the vertices

More information

5th Grade Mathematics Essential Standards

5th Grade Mathematics Essential Standards Standard 1 Number Sense (10-20% of ISTEP/Acuity) Students compute with whole numbers*, decimals, and fractions and understand the relationship among decimals, fractions, and percents. They understand the

More information

STAAR Category 3 Grade 8 Mathematics TEKS 8.6A/8.6B/8.7A. Student Activity 1

STAAR Category 3 Grade 8 Mathematics TEKS 8.6A/8.6B/8.7A. Student Activity 1 Student Activity 1 Work with your partner to answer the following problems. Problem 1: The bases of a cylinder are two congruent that are to each other. The perpendicular distance between the two bases

More information

Algebra Area of Parallelograms

Algebra Area of Parallelograms Lesson 10.1 Reteach Algebra Area of Parallelograms The formula for the area of a parallelogram is the product of the base and height. The formula for the area of a square is the square of one of its sides.

More information

Geometry: , 4.5 Notes

Geometry: , 4.5 Notes Geometry: 4.1-4.3, 4.5 Notes NAME 4.1 Be able to perform translations Date: Define Vocabulary: vector initial point terminal point horizontal component vertical component component form transformation

More information

Unit 1, Lesson 1: Moving in the Plane

Unit 1, Lesson 1: Moving in the Plane Unit 1, Lesson 1: Moving in the Plane Let s describe ways figures can move in the plane. 1.1: Which One Doesn t Belong: Diagrams Which one doesn t belong? 1.2: Triangle Square Dance m.openup.org/1/8-1-1-2

More information

Guided Problem Solving

Guided Problem Solving -1 Guided Problem Solving GPS Student Page 57, Exercises 1 1: Match each rule with the correct translation. A. (x, y) (x, y 1 ) I. P(, 1) P (3, ) B. (x, y) (x 1 3, y) II. Q(3, 0) Q (3, ) C. (x, y) (x 1,

More information

For full credit, show all work. Study all geometry vocabulary words from your chapter packet.

For full credit, show all work. Study all geometry vocabulary words from your chapter packet. Accelerated Review 9: Geometric Relationships Name: For full credit, show all work. Study all geometry vocabulary words from your chapter packet. Caleb drew a quadrilateral on his paper. Which of the following

More information

Geometry Summative Review 2008

Geometry Summative Review 2008 Geometry Summative Review 2008 Page 1 Name: ID: Class: Teacher: Date: Period: This printed test is for review purposes only. 1. ( 1.67% ) Which equation describes a circle centered at (-2,3) and with radius

More information

The scale factor between the blue diamond and the green diamond is, so the ratio of their areas is.

The scale factor between the blue diamond and the green diamond is, so the ratio of their areas is. For each pair of similar figures, find the area of the green figure. 1. The scale factor between the blue diamond and the green diamond is, so the ratio of their areas is. The area of the green diamond

More information

Additional Practice. Name Date Class. 1. Which of these angles are acute, which are obtuse, and which are right? a. b. c. d. e. f. Shapes and Designs

Additional Practice. Name Date Class. 1. Which of these angles are acute, which are obtuse, and which are right? a. b. c. d. e. f. Shapes and Designs Additional Practice Investigation 1 1. Which of these angles are acute, which are obtuse, and which are right? a. b. c. d. e. f. 1 Additional Practice (continued) Investigation 1 2. Use the diagram of

More information

EOC Review: Practice: 1. In the circle below, AB = 2BC. What is the probability of hitting the shaded region with a random dart?

EOC Review: Practice: 1. In the circle below, AB = 2BC. What is the probability of hitting the shaded region with a random dart? EOC Review: Focus Areas: Trigonometric Ratios Area and Volume including Changes in Area/Volume Geometric Probability Proofs and Deductive Reasoning including Conditionals Properties of Polygons and Circles

More information

SOL Review April Home work-nallari Math 8 Measurement & Geometry SOL -CAT Questions 13 SOL 8.6a, 8.7a-b, 8.8a-b,8.9,8.10a-b&8.

SOL Review April Home work-nallari Math 8 Measurement & Geometry SOL -CAT Questions 13 SOL 8.6a, 8.7a-b, 8.8a-b,8.9,8.10a-b&8. SOL Review April 18-22 Home work-nallari Math 8 Measurement & Geometry SOL -CAT Questions 13 SOL 8.6a, 8.7a-b, 8.8a-b,8.9,8.10a-b&8.11 Nallari Math 8 Class 1 SOL8.6a 1. If two angles add up to 180 o they

More information

Name: Period 2/3/2012 2/16/2012 PreAP

Name: Period 2/3/2012 2/16/2012 PreAP Name: Period 2/3/2012 2/16/2012 PreP UNIT 11: TRNSFORMTIONS I can define, identify and illustrate the following terms: Symmetry Line of Symmetry Rotational Symmetry Translation Symmetry Isometry Pre-Image

More information

Lesson Plan For Common Core 8 TRANSFORMATIONS OF THE PLANE

Lesson Plan For Common Core 8 TRANSFORMATIONS OF THE PLANE Lesson Plan For Common Core 8 TRANSFORMATIONS OF THE PLANE STANDARD: CCSS.MATH.CONTENT.HSG.CO.A.2 Represent transformations in the plane using, e.g., transparencies and geometry software; describe transformations

More information

Sample: Do Not Reproduce GEO1 STUDENT PAGES. GEOMETRY AND MEASUREMENT Student Pages for Packet 1: Length and Area.

Sample: Do Not Reproduce GEO1 STUDENT PAGES. GEOMETRY AND MEASUREMENT Student Pages for Packet 1: Length and Area. Name Period Date GEOMETRY AND MEASUREMENT Student Pages for Packet 1: GEO1.1 Congruence Plot simple figures on coordinate graphs, and determine their lengths and areas. Make conjectures about perimeters

More information

Vocabulary. Term Page Definition Clarifying Example. center of dilation. composition of transformations. enlargement. glide reflection.

Vocabulary. Term Page Definition Clarifying Example. center of dilation. composition of transformations. enlargement. glide reflection. CHAPTER 12 Vocabulary The table contains important vocabulary terms from Chapter 12. As you work through the chapter, fill in the page number, definition, and a clarifying example. center of dilation Term

More information

Vocabulary. Term Page Definition Clarifying Example. center of dilation. composition of transformations. enlargement. glide reflection.

Vocabulary. Term Page Definition Clarifying Example. center of dilation. composition of transformations. enlargement. glide reflection. CHAPTER 12 Vocabulary The table contains important vocabulary terms from Chapter 12. As you work through the chapter, fill in the page number, definition, and a clarifying example. center of dilation Term

More information

GEOMETRY. slide #3. 6th Grade Math Unit 7. 6th Grade Unit 7: GEOMETRY. Name: Table of Contents. Area of Rectangles

GEOMETRY. slide #3. 6th Grade Math Unit 7. 6th Grade Unit 7: GEOMETRY. Name: Table of Contents. Area of Rectangles Name: 6th Grade Math Unit 7 GEOMETRY 2012 10 17 www.njctl.org 1 Table of Contents Area of Rectangles Area of Parallelograms Area of Triangles Area of Trapezoids Mixed Review Area of Irregular Figures Area

More information

Page 1 CCM6+7+ UNIT 9 GEOMETRY 2D and 3D 2D & 3D GEOMETRY PERIMETER/CIRCUMFERENCE & AREA SURFACE AREA & VOLUME

Page 1 CCM6+7+ UNIT 9 GEOMETRY 2D and 3D 2D & 3D GEOMETRY PERIMETER/CIRCUMFERENCE & AREA SURFACE AREA & VOLUME Page 1 CCM6+7+ UNIT 9 GEOMETRY 2D and 3D UNIT 9 2016-17 2D & 3D GEOMETRY PERIMETER/CIRCUMFERENCE & AREA SURFACE AREA & VOLUME CCM6+7+ Name: Math Teacher: Projected Test Date: MAIN CONCEPT(S) PAGE(S) Vocabulary

More information

We can use square dot paper to draw each view (top, front, and sides) of the three dimensional objects:

We can use square dot paper to draw each view (top, front, and sides) of the three dimensional objects: Unit Eight Geometry Name: 8.1 Sketching Views of Objects When a photo of an object is not available, the object may be drawn on triangular dot paper. This is called isometric paper. Isometric means equal

More information

Name: Geometry Practice Test Unit 2 Transformations in the Plane. Date: Pd:

Name: Geometry Practice Test Unit 2 Transformations in the Plane. Date: Pd: Geometry Practice Test Unit 2 Transformations in the Plane (G.CO.A.2 - G.CO.A.5) Name: Date: Pd: 1) What type of symmetry is shown in this picture? (multiple choices-select all that apply) A) Point symmetry

More information

seen something like it many times when playing video games.

seen something like it many times when playing video games. Cakes and Pancakes Translating and Stacking Two-Dimensional Figures.2 Learning Goals In this lesson, you will: Apply translations to two-dimensional plane figures to create three-dimensional solids. Describe

More information

Page 1 CCM6+7+ UNIT 9 GEOMETRY 2D and 3D. Angle Relationships, Area, and Perimeter/Circumference Surface Area and Volume

Page 1 CCM6+7+ UNIT 9 GEOMETRY 2D and 3D. Angle Relationships, Area, and Perimeter/Circumference Surface Area and Volume Page 1 CCM6+7+ UNIT 9 GEOMETRY 2D and 3D UNIT 9 2015-16 Angle Relationships, Area, and Perimeter/Circumference Surface Area and Volume CCM6+7+ Name: Math Teacher: Projected Test Date: MAIN CONCEPT(S) PAGE(S)

More information

TRANSFORMATIONS AND CONGRUENCE

TRANSFORMATIONS AND CONGRUENCE 1 TRANSFORMATIONS AND CONGRUENCE LEARNING MAP INFORMATION STANDARDS 8.G.1 Verify experimentally the s, s, and s: 8.G.1.a Lines are taken to lines, and line segments to line segments of the same length.

More information

Name: Target 12.2: Find and apply surface of Spheres and Composites 12.2a: Surface Area of Spheres 12.2b: Surface Area of Composites Solids

Name: Target 12.2: Find and apply surface of Spheres and Composites 12.2a: Surface Area of Spheres 12.2b: Surface Area of Composites Solids Unit 12: Surface Area and Volume of Solids Target 12.0: Euler s Formula and Introduction to Solids Target 12.1: Find and apply surface area of solids 12.1a: Surface Area of Prisms and Cylinders 12.1b:

More information

12-6 Exercises KEYWORD: MG7 12-6

12-6 Exercises KEYWORD: MG7 12-6 THINK AND DISCUSS 1. Explain how you can identify a frieze pattern that has glide reflection symmetry. 2. Is it possible to tessellate a plane using circles? Why or why not? 3. GET ORGANIZED Copy and complete

More information

Geometry Second Semester Final Exam Review

Geometry Second Semester Final Exam Review Name: Class: Date: ID: A Geometry Second Semester Final Exam Review 1. Find the length of the leg of this right triangle. Give an approximation to 3 decimal places. 2. Find the length of the leg of this

More information

Polygons. 5 sides 5 angles. pentagon. no no R89. Name

Polygons. 5 sides 5 angles. pentagon. no no R89. Name Lesson 11.1 Polygons A polygon is a closed plane figure formed by three or more line segments that meet at points called vertices. You can classify a polygon by the number of sides and the number of angles

More information

G-GMD.1- I can explain the formulas for volume of a cylinder, pyramid, and cone by using dissection, Cavalieri s, informal limit argument.

G-GMD.1- I can explain the formulas for volume of a cylinder, pyramid, and cone by using dissection, Cavalieri s, informal limit argument. G.MG.2 I can use the concept of density in the process of modeling a situation. 1. Each side of a cube measures 3.9 centimeters. Its mass is 95.8 grams. Find the density of the cube. Round to the nearest

More information

What You ll Learn. Why It s Important

What You ll Learn. Why It s Important First Nations artists use their artwork to preserve their heritage. Haida artist Don Yeomans is one of the foremost Northwest Coast artists. Look at this print called The Benefit, created by Don Yeomans.

More information

Intuitive Geometry Semester 2 Practice Exam

Intuitive Geometry Semester 2 Practice Exam 1. tire has a radius of 15 inches. What is the approximate circumference, in inches, of the tire?. 707 in.. 188 in.. 94 in. D. 47 in. 2. In the figure below, adjacent sides of the polygon are perpendicular..

More information

3. Given the similarity transformation shown below; identify the composition:

3. Given the similarity transformation shown below; identify the composition: Midterm Multiple Choice Practice 1. Based on the construction below, which statement must be true? 1 1) m ABD m CBD 2 2) m ABD m CBD 3) m ABD m ABC 1 4) m CBD m ABD 2 2. Line segment AB is shown in the

More information

By: Caroline, Jenny, Jennifer, Jared, Kaleigh

By: Caroline, Jenny, Jennifer, Jared, Kaleigh By: Caroline, Jenny, Jennifer, Jared, Kaleigh 1) What are the coordinates of the image of (2, 5) after a counterclockwise rotation of 90º about the origin? 1) ( 2, 5) 2) (2, 5) 3) ( 5, 2) 4) (5, 2) A dilation

More information

1ACE Exercise 17. Name Date Class. 17. Which figure does NOT have rotation symmetry?

1ACE Exercise 17. Name Date Class. 17. Which figure does NOT have rotation symmetry? 1ACE Exercise 17 Investigation 1 17. Which figure does NOT have rotation symmetry? HINT Rotation symmetry means you can turn the object around its center to a position in which it looks the same as the

More information

For Exercises 1 4, follow these directions. Use the given side lengths.

For Exercises 1 4, follow these directions. Use the given side lengths. A C E Applications Connections Extensions Applications For Exercises 1 4, follow these directions. Use the given side lengths. If possible, build a triangle with the side lengths. Sketch your triangle.

More information

Unit 14: Transformations (Geometry) Date Topic Page

Unit 14: Transformations (Geometry) Date Topic Page Unit 14: Transformations (Geometry) Date Topic Page image pre-image transformation translation image pre-image reflection clockwise counterclockwise origin rotate 180 degrees rotate 270 degrees rotate

More information

Updated Review Content and Added-on Practice Problems

Updated Review Content and Added-on Practice Problems Updated Review Content and Added-on Practice Problems Underlined below is the added review content which supplements the original review package. The added sample questions are also presented in tandem.

More information

Number/Computation. addend Any number being added. digit Any one of the ten symbols: 0, 1, 2, 3, 4, 5, 6, 7, 8, or 9

Number/Computation. addend Any number being added. digit Any one of the ten symbols: 0, 1, 2, 3, 4, 5, 6, 7, 8, or 9 14 Number/Computation addend Any number being added algorithm A step-by-step method for computing array A picture that shows a number of items arranged in rows and columns to form a rectangle associative

More information

George used a decorative gate to connect the fencing around his backyard.

George used a decorative gate to connect the fencing around his backyard. Page 1 of 21 1. George used a decorative gate to connect the fencing around his backyard. Using the information on the diagram and assuming the top and bottom are parallel, is 40º 60º C) 120º D) 180º 2.

More information

Additional Practice. Name Date Class. 1. Refer to the rectangle at the right for the exercises below.

Additional Practice. Name Date Class. 1. Refer to the rectangle at the right for the exercises below. Additional Practice Investigation 1 1. Refer to the rectangle at the right for the eercises below. a. Give the length and width of a larger similar rectangle. Eplain your reasoning. cm cm b. Give the length

More information

6. If QRSTU is a regular pentagon, what is the measure of T? 1. If STUV is a parallelogram, what are the coordinates of point U?

6. If QRSTU is a regular pentagon, what is the measure of T? 1. If STUV is a parallelogram, what are the coordinates of point U? 1. If UV is a parallelogram, what are the coordinates of point U?. If RU is a regular pentagon, what is the measure of? (0, y) U(?,?) (, 0) V( + z, 0) 7. hree siblings are to share an inheritance of $1,0

More information

Polygons. 5 sides 5 angles. pentagon. Name

Polygons. 5 sides 5 angles. pentagon. Name Lesson 11.1 Reteach Polygons A polygon is a closed plane figure formed by three or more line segments that meet at points called vertices. You can classify a polygon by the number of sides and the number

More information

Classifying Quadrilaterals

Classifying Quadrilaterals Practice Book Use anytime after Bridges, Unit 3, Session 12. Classifying Quadrilaterals A quadrilateral is any polygon that has 4 sides. There are many kinds of quadrilaterals, including: Trapezoid: a

More information

About Finish Line Mathematics 5

About Finish Line Mathematics 5 Table of COntents About Finish Line Mathematics 5 Unit 1: Big Ideas from Grade 1 7 Lesson 1 1.NBT.2.a c Understanding Tens and Ones [connects to 2.NBT.1.a, b] 8 Lesson 2 1.OA.6 Strategies to Add and Subtract

More information

Distance in Coordinate Geometry

Distance in Coordinate Geometry Page 1 of 6 L E S S O N 9.5 We talk too much; we should talk less and draw more. Distance in Coordinate Geometry Viki is standing on the corner of Seventh Street and 8th Avenue, and her brother Scott is

More information

Lesson 1. Unit 2 Practice Problems. Problem 2. Problem 1. Solution 1, 4, 5. Solution. Problem 3

Lesson 1. Unit 2 Practice Problems. Problem 2. Problem 1. Solution 1, 4, 5. Solution. Problem 3 Unit 2 Practice Problems Lesson 1 Problem 1 Rectangle measures 12 cm by 3 cm. Rectangle is a scaled copy of Rectangle. Select all of the measurement pairs that could be the dimensions of Rectangle. 1.

More information

MATH DICTIONARY. Number Sense. Number Families. Operations. Counting (Natural) Numbers The numbers we say when we count. Example: {0, 1, 2, 3, 4 }

MATH DICTIONARY. Number Sense. Number Families. Operations. Counting (Natural) Numbers The numbers we say when we count. Example: {0, 1, 2, 3, 4 } Number Sense Number Families MATH DICTIONARY Counting (Natural) Numbers The numbers we say when we count Example: {1, 2, 3, 4 } Whole Numbers The counting numbers plus zero Example: {0, 1, 2, 3, 4 } Positive

More information

A C E. Applications. Applications Connections Extensions

A C E. Applications. Applications Connections Extensions A C E Applications Connections Extensions Applications 1. Suppose that the polygons below were drawn on centimeter grid paper. How many 1-centimeter cubes (some cut in pieces) would it take to cover each

More information

360π cm. If the height of the cylinder is 10

360π cm. If the height of the cylinder is 10 1. Find the volume of a sphere with diameter 1 cm. 88π cm () 6π cm (C) 144π cm 864π cm 04π cm. In the diagram below, A and EG are parallel with transversal CH. If the measure of CA 4x 15 and the measure

More information

2017-ACTM Regional Mathematics Contest

2017-ACTM Regional Mathematics Contest 2017-TM Regional Mathematics ontest Geometry nswer each of the multiple-choice questions and mark your answers on that answer sheet provided. When finished with the multiple-choice items, then answer the

More information

Geometry Second Semester Review

Geometry Second Semester Review Class: Date: Geometry Second Semester Review Short Answer 1. Identify the pairs of congruent angles and corresponding sides. 2. Determine whether the rectangles are similar. If so, write the similarity

More information

3. Draw the orthographic projection (front, right, and top) for the following solid. Also, state how many cubic units the volume is.

3. Draw the orthographic projection (front, right, and top) for the following solid. Also, state how many cubic units the volume is. PAP Geometry Unit 7 Review Name: Leave your answers as exact answers unless otherwise specified. 1. Describe the cross sections made by the intersection of the plane and the solids. Determine if the shape

More information

Unit 5: Transformations in the Coordinate Plane

Unit 5: Transformations in the Coordinate Plane Unit 5: Transformations in the Coordinate Plane In this unit, students review the definitions of three types of transformations that preserve distance and angle: rotations, reflections, and translations.

More information

Lesson 10T ~ Three-Dimensional Figures

Lesson 10T ~ Three-Dimensional Figures Lesson 10T ~ Three-Dimensional Figures Name Period Date Use the table of names at the right to name each solid. 1. 2. Names of Solids 3. 4. 4 cm 4 cm Cone Cylinder Hexagonal prism Pentagonal pyramid Rectangular

More information

Geometry EOC. SOL Simulation

Geometry EOC. SOL Simulation Geometry EO SOL Simulation Graphing alculator ctive hesterfield ounty Public Schools epartment of Mathematics 2011-2012 1 George used a decorative gate to connect the fencing around his backyard. E F 60

More information

Junior Circle Meeting 9 Commutativity and Inverses. May 30, We are going to examine different ways to transform the square below:

Junior Circle Meeting 9 Commutativity and Inverses. May 30, We are going to examine different ways to transform the square below: Junior Circle Meeting 9 Commutativity and Inverses May 0, 2010 We are going to examine different ways to transform the square below: Just as with the triangle from last week, we are going to examine flips

More information

Geometry. Set 1. Daily Practice And Answer Keys

Geometry. Set 1. Daily Practice And Answer Keys Geometry Set 1 Daily Practice And Answer Keys Website: http://alex.state.al.us/ccrs/node/314 Name Date Daily Practice Geometry DAY 1 1. The figure above is shaded on the top side and white on the under

More information

4-1 Congruence and Transformations

4-1 Congruence and Transformations 4-1 Congruence and Transformations Warm Up Lesson Presentation Lesson Quiz Holt Geometry McDougal Geometry Objectives Draw, identify, and describe transformations in the coordinate plane. Use properties

More information

Name Date Class. When the bases are the same and you multiply, you add exponents. When the bases are the same and you divide, you subtract exponents.

Name Date Class. When the bases are the same and you multiply, you add exponents. When the bases are the same and you divide, you subtract exponents. 2-1 Integer Exponents A positive exponent tells you how many times to multiply the base as a factor. A negative exponent tells you how many times to divide by the base. Any number to the 0 power is equal

More information

Math 8 Module 3 End of Module Study Guide

Math 8 Module 3 End of Module Study Guide Name ANSWER KEY Date 3/21/14 Lesson 8: Similarity 1. In the picture below, we have a triangle DEF that has been dilated from center O, by scale factor r = ½. The dilated triangle is noted by D E F. We

More information

Covering & Surrounding

Covering & Surrounding Covering & Surrounding Two-Dimensional Measurement and Three-Dimensional Measurement Name: Hour: Table of Contents Investigation 1 Investigation 1.1 page 3 Investigation 1.2 page 7 Investigation 1.3 page

More information

Geometry. Name. Use AngLegs to model each set of shapes. Complete each statement with the phrase "is" or "is not." Triangle 1 congruent to Triangle 2.

Geometry. Name. Use AngLegs to model each set of shapes. Complete each statement with the phrase is or is not. Triangle 1 congruent to Triangle 2. Lesson 1 Geometry Name Use AngLegs to model each set of shapes. Complete each statement with the phrase "is" or "is not." 1. 2. 1 2 1 2 3 4 3 4 Triangle 1 congruent to Triangle 2. Triangle 2 congruent

More information

Transformations on the Coordinate Plane Halftime Salute

Transformations on the Coordinate Plane Halftime Salute Transformations on the Coordinate Plane SUGGESTED LEARNING STRATEGIES: Questioning the Text, Shared Reading, Visualization ACTIVITY.1 To boost school spirit and get students excited about geometry, the

More information

8. The triangle is rotated around point D to create a new triangle. This looks like a rigid transformation.

8. The triangle is rotated around point D to create a new triangle. This looks like a rigid transformation. 2.1 Transformations in the Plane 1. True 2. True 3. False 4. False 5. True 6. False 7. True 8. The triangle is rotated around point D to create a new triangle. This looks like a rigid transformation. 9.

More information

Engage NY Lesson 15: Representing Three-Dimensional Figures Using Nets

Engage NY Lesson 15: Representing Three-Dimensional Figures Using Nets Name: Surface Area & Volume Packet Engage NY Lesson 15: Representing Three-Dimensional Figures Using Nets Classwork Cereal Box Similarities: Cereal Box Differences: Exercise 1 1. Some of the drawings below

More information

SEVENTH EDITION and EXPANDED SEVENTH EDITION

SEVENTH EDITION and EXPANDED SEVENTH EDITION SEVENTH EDITION and EXPANDED SEVENTH EDITION Slide 9-1 Chapter 9 Geometry 9.1 Points, Lines, Planes, and Angles Basic Terms A line segment is part of a line between two points, including the endpoints.

More information

Name 13-6A. 1. Which is the volume of the solid? 2. What is the volume of the solid? A 72 cm 3 B 432 cm 3 C 672 cm 3 D 864 cm 3

Name 13-6A. 1. Which is the volume of the solid? 2. What is the volume of the solid? A 72 cm 3 B 432 cm 3 C 672 cm 3 D 864 cm 3 . Which is the volume of the solid? Quick Check. What is the volume of the solid? 8 in. 9 in. 8 in. A 96 in B 9 in C 0 in D 6 in 8 in. A 7 B C 67 D 86. Writing to Explain Carlos is an architect. He wants

More information

Find the surface area of the tent model. Round to the nearest tenth if necessary.

Find the surface area of the tent model. Round to the nearest tenth if necessary. Use isometric dot paper and the orthographic drawings to sketch the solid. left view: The figure is 3 units high in the 1st, 5th, and 6th columns. The figure is 1 unit high at the 2nd and 3rd columns.

More information

Name: Class: Date: ID: A

Name: Class: Date: ID: A Name: Class: Date: ID: A Ch. 6 Practice Test Multiple Choice Identify the choice that best completes the statement or answers the question. 1. A doorway of width 3.25 ft and height 7.25 ft is similar to

More information

FSA Geometry End-of-Course Review Packet. Circles Geometric Measurement and Geometric Properties

FSA Geometry End-of-Course Review Packet. Circles Geometric Measurement and Geometric Properties FSA Geometry End-of-Course Review Packet Circles Geometric Measurement and Geometric Properties Table of Contents MAFS.912.G-C.1.1 EOC Practice... 3 MAFS.912.G-C.1.2 EOC Practice... 5 MAFS.912.G-C.1.3

More information

Study Guide and Review

Study Guide and Review Choose the letter of the word or phrase that best completes each statement. a. ratio b. proportion c. means d. extremes e. similar f. scale factor g. AA Similarity Post h. SSS Similarity Theorem i. SAS

More information

Chapter Test Form A. 187 Holt Geometry. Name Date Class

Chapter Test Form A. 187 Holt Geometry. Name Date Class 10 Form A Circle the best answer. 1. Which three-dimensional figure does NOT have a vertex? A cylinder B rectangular prism C rectangular pyramid D triangular prism 5. Use Euler s formula to determine which

More information

Geometry Term 2 Final Exam Review

Geometry Term 2 Final Exam Review Geometry Term Final Eam Review 1. If X(5,4) is reflected in the line y =, then find X.. (5,). (5,0). (-1,) D. (-1,4) Name 6. Find the tangent of angle X. Round your answer to four decimal places. X. 0.5

More information

TEACHER GUIDE INCLUDES. Tier 1 Tier 2 Tier 3 Correlations. Diagnostic Interviews for Every Common Core Cluster

TEACHER GUIDE INCLUDES. Tier 1 Tier 2 Tier 3 Correlations. Diagnostic Interviews for Every Common Core Cluster TEACHER GUIDE FOR THE COMMON CORE STATE STANDARDS FOR MATHEMATICS 3 INCLUDES Tier Tier Tier 3 Correlations Diagnostic Interviews for Every Common Core Cluster Tier Lessons, Tier Prerequisite Skills, and

More information

On a coordinate plane, such a change can be described by counting the number of spaces, vertically and horizontally, that the figure has moved.

On a coordinate plane, such a change can be described by counting the number of spaces, vertically and horizontally, that the figure has moved. Transformations We have studied four different kinds of transformations: translation, rotation, reflection, and dilation. Each one involves moving a figure to a new location on a plane. Translation Translation

More information

U N I T Transformations

U N I T Transformations U N I T Transformations Learning Goals Longhouses have long been the centre of social activity in West Coast First Nations communities. The longhouse is usually built from large cedar posts, beams, and

More information

Honors Geometry Semester 1 Exam Review. Hour: CB and CA are opposite rays and CD and CA. Show all your work whenever possible.

Honors Geometry Semester 1 Exam Review. Hour: CB and CA are opposite rays and CD and CA. Show all your work whenever possible. Honors Geometry Semester 1 Exam Review Name: Hour: Show all your work whenever possible 1escribe what the notation RS stands for Illustrate with a sketch 8 Find the distance between the points (1, 4) and

More information

Determine which congruence criteria can be used to show that two triangles are congruent.

Determine which congruence criteria can be used to show that two triangles are congruent. Answers Teacher Copy Lesson 11-1: Congruent Triangles Lesson 11-2 Congruence Criteria Learning Targets p. 147 Develop criteria for proving triangle congruence. Determine which congruence criteria can be

More information

Perimeter and Area of Geometric Figures on the Coordinate Plane

Perimeter and Area of Geometric Figures on the Coordinate Plane Perimeter and Area of Geometric Figures on the Coordinate Plane There are more than 200 national flags in the world. One of the largest is the flag of Brazil flown in Three Powers Plaza in Brasilia. This

More information

Rational Numbers: Graphing: The Coordinate Plane

Rational Numbers: Graphing: The Coordinate Plane Rational Numbers: Graphing: The Coordinate Plane A special kind of plane used in mathematics is the coordinate plane, sometimes called the Cartesian plane after its inventor, René Descartes. It is one

More information

11.4 Three-Dimensional Figures

11.4 Three-Dimensional Figures 11. Three-Dimensional Figures Essential Question What is the relationship between the numbers of vertices V, edges E, and faces F of a polyhedron? A polyhedron is a solid that is bounded by polygons, called

More information

Franklin Math Bowl 2008 Group Problem Solving Test Grade 6

Franklin Math Bowl 2008 Group Problem Solving Test Grade 6 Group Problem Solving Test Grade 6 1. The fraction 32 17 can be rewritten by division in the form 1 p + q 1 + r Find the values of p, q, and r. 2. Robert has 48 inches of heavy gauge wire. He decided to

More information

Name Date Class. Original content Copyright by Holt McDougal. Additions and changes to the original content are the responsibility of the instructor.

Name Date Class. Original content Copyright by Holt McDougal. Additions and changes to the original content are the responsibility of the instructor. Name _ Date Class 8-1 Building Blocks of Geometry Use the diagram to name each geometric figure. 1. two points 2. a plane 3. a line segment 4. a point shared by two lines 5. a line Use the diagram to give

More information

Geometry: Semester 2 Practice Final Unofficial Worked Out Solutions by Earl Whitney

Geometry: Semester 2 Practice Final Unofficial Worked Out Solutions by Earl Whitney Geometry: Semester 2 Practice Final Unofficial Worked Out Solutions by Earl Whitney 1. Wrapping a string around a trash can measures the circumference of the trash can. Assuming the trash can is circular,

More information

M8WSB-C07.qxd 4/4/08 7:00 PM Page NEL

M8WSB-C07.qxd 4/4/08 7:00 PM Page NEL 8 NEL GOAL Chapter 7 Tessellations You will be able to use angle measurements to identify regular and irregular polygons that might tessellate identify and describe translations, reflections, or rotations

More information

TRANSFORMATIONS. The original figure is called the pre-image; the new (copied) picture is called the image of the transformation.

TRANSFORMATIONS. The original figure is called the pre-image; the new (copied) picture is called the image of the transformation. Quiz Review Sheet A transformation is a correspondence that maps a point. TRANSFORMATIONS The original figure is called the pre-image; the new (copied) picture is called the image of the transformation.

More information

B ABC is mapped into A'B'C'

B ABC is mapped into A'B'C' h. 00 Transformations Sec. 1 Mappings & ongruence Mappings Moving a figure around a plane is called mapping. In the figure below, was moved (mapped) to a new position in the plane and the new triangle

More information

AREA Judo Math Inc.

AREA Judo Math Inc. AREA 2013 Judo Math Inc. 6 th grade Problem Solving Discipline: Black Belt Training Order of Mastery: Area 1. Area of triangles by composition 2. Area of quadrilaterals by decomposing 3. Draw polygons

More information

Middle School Math Course 3

Middle School Math Course 3 Middle School Math Course 3 Correlation of the ALEKS course Middle School Math Course 3 to the Texas Essential Knowledge and Skills (TEKS) for Mathematics Grade 8 (2012) (1) Mathematical process standards.

More information

Chapter 2 Rigid Transformations Geometry. For 1-10, determine if the following statements are always, sometimes, or never true.

Chapter 2 Rigid Transformations Geometry. For 1-10, determine if the following statements are always, sometimes, or never true. Chapter 2 Rigid Transformations Geometry Name For 1-10, determine if the following statements are always, sometimes, or never true. 1. Right triangles have line symmetry. 2. Isosceles triangles have line

More information

Spring 2012 Student Performance Analysis

Spring 2012 Student Performance Analysis Spring 2012 Student Performance Analysis Geometry Standards of Learning Presentation may be paused and resumed using the arrow keys or the mouse. 1 Translating a Short Verbal Argument into Symbolic Form

More information

Chapter 9 Retake Test (GH)

Chapter 9 Retake Test (GH) Name: Period: Date: Chapter 9 Retake Test (GH) 1 The hexagon GIKMPR and FJN are regular. The dashed line segments form 30 angles. Find the angle of rotation about O that maps L to J. 2 The vertices of

More information

Geometry Practice. 1. Angles located next to one another sharing a common side are called angles.

Geometry Practice. 1. Angles located next to one another sharing a common side are called angles. Geometry Practice Name 1. Angles located next to one another sharing a common side are called angles. 2. Planes that meet to form right angles are called planes. 3. Lines that cross are called lines. 4.

More information