Intematix Ambient Lighting Module

Transcription

1 Intematix Ambient Lighting Module Product Data Sheet The Intematix ambient lighting module is a simple plug and play solution that enables highly uniform glare free lighting. The unique 240 degree wide beam pattern allows for the use of fewer light engines to create excellent uniformity and fill in a wide variety of functional, decorative, and architectural lighting applications. The remote phosphor system architecture eliminates the pixelation that is often present with white LED linear lighting systems and remains clean and consistent even under deep dimming conditions. The robust polycarbonate lens fully encloses the LEDs, eliminating risk of damage. Color consistency of 3 SDCM is maintained over angle, over length, part to part, and over time; completely eliminating any concerns of color uniformity. Length options of 9.5, 12, 20, 21.8 and 43 inches reduce wiring, mounting steps, and components; further reducing system costs. Customized solutions with color temperatures from 2400K to 10,000K, CRI values of up to 98, high gamut area index (GAI), customized white points and lengths are also supportable. Product Features Integrated modular solution Wide angle 240 FWHM beam pattern Diffuse and uniform emission pattern Impact resistant polycarbonate cover 3 SDCM Color consistency Multiple product length options 5 Year limited warranty Application Benefits Accelerates time to market Excellent uniformity and fill Glare free non pixelated lighting Protects LEDs from risk of damage Uniform consistent lighting Reduced wiring and mounting costs Design with confidence

2 Table of Contents Product Nomenclature 3 Minor Product Change Policy 3 Performance Characteristics 80 CRI Products 4 Performance Characteristics 90 CRI Products 5 Typical Electrical Characteristics 6 Maximum Electrical Characteristics 7 Color Binning Information 8 Relative Spectral Power Distribution 9 Intensity Distribution 10 Relative Light Output vs. Drive Current 10 Forward Voltage vs. Forward Current 13 Electrical Power vs. Forward Current 15 Temperature Ratings 18 Lumen Maintenance 18 Mechanical Characteristics 19 Regulatory Compliance 24 Product Marking 24 Packaging and Labeling 25 Handling Considerations 26 Company Information 26 2 I ntematix

3 Product Nomenclature Intematix Ambient Lighting Module products are identified by the following product nomenclature: Where: Example: I L M A B C D E F G H I J K L M N P I L M Designates the Intematix light module product family A B Designates the application A L = Ambient lighting module C D Designates the design version 0 1 = Version 1 E Designates the first digit in CRI 8 = 80 CRI minimum F G Designates the first two digits in CCT 4 0 = 4000K H I J K Designates the nominal lumen output = 2100 lm nominal L M N P Designates nominal product length in mm = 508mm (20 inches) ILM AL : Intematix ambient lighting module, design version 1, 80 CRI minimum, 4000K, 2100 nominal lumens, 508mm length Minor Product Change Policy The rigorous qualification testing of Intematix products ensures product performance. Slight cosmetic changes which do not affect the form, fit or function of the product may occur as Intematix continues product optimization. 3 I ntematix

4 Performance Characteristics 80 CRI Products Product Length [2] Drive Current (ma) Nominal CCT [1] (K) Color Consistency [3] (SDCM) Min CRI [1,4] Typical LOP [1,5] (lm) Typical Efficacy [6] (lm/w) ILM AL ILM AL mm / ILM AL ILM AL ILM AL mm / ILM AL ILM AL ILM AL mm / ILM AL ILM AL ILM AL mm / ILM AL ILM AL ILM AL mm / ILM AL Notes: 1. All values included in the table above are hot stabilized performance assuming a case temperature (T c ) of 40 C after 60 minutes of operation. 2. Lengths included in the table above are the maximum mechanical length of the product. For more detailed information please see the mechanical characteristics section of this data sheet. 3. Color Consistency is defined as variation from part to part, color over angle within a part from 90 to +90 degrees from the vertical axis of the part, and over the length of the product. Intematix maintains a tolerance of ± 0.5 SDCM on color consistency measurements. 4. Typical CRI of the min 80 CRI modules is Lumen output is maintained within ± 5% of the typical value. Intematix maintains a tolerance of ± 7% of flux measurements. 4 I ntematix

5 Performance Characteristics 90 CRI Products Product Length [2] Drive Current (ma) Nominal CCT [1] (K) Color Consistency [3] (SDCM) Min CRI [1,4] Typical LOP [1,5] (lm) Typical Efficacy [6] (lm/w) ILM AL ILM AL mm / ILM AL ILM AL ILM AL mm / ILM AL ILM AL ILM AL mm / ILM AL ILM AL ILM AL mm / ILM AL ILM AL ILM AL mm / ILM AL Notes: 1. All values included in the table above are hot stabilized performance assuming a case temperature (T c ) of 40 C after 60 minutes of operation. 2. Lengths included in the table above are the maximum mechanical length of the product. For more detailed information please see the mechanical characteristics section of this data sheet. 3. Color Consistency is defined as variation from part to part, color over angle within a part from 90 to +90 degrees from the vertical axis of the part, and over the length of the product. Intematix maintains a tolerance of ± 0.5 SDCM on color consistency measurements. 4. Typical CRI of the min 90 CRI modules is 92 with R9 > Lumen output is maintained within ± 5% of the typical value. Intematix maintains a tolerance of ± 7% of flux measurements. 5 I ntematix

6 Typical Electrical Characteristics Product Typical Forward Current (ma) Forward Voltage at Typical Forward Current (V) Min Typ Max Typical Power at Typical Forward Current (W) ILM AL01 xxx ILM AL01 xxx ILM AL01 xxx ILM AL01 xxx ILM AL01 xxx ILM AL01 xxx ILM AL01 xxx ILM AL01 xxx ILM AL01 xxx ILM AL01 xxx Notes: 1. The designation of xxx in the part number indicates that the values in the table represent all CCT and CRI combinations within the part number family. 2. All values included in the table above are hot stabilized performance assuming a case temperature (T c ) of 40 C after 60 minutes of operation. 3. Intematix maintains a tolerance of ± 0.10V on forward voltage measurements. 6 I ntematix

7 Maximum Electrical Characteristics Product Maximum Forward Current (ma) Forward Voltage at Max Forward Current (V) Min Typ Max Typical Power at Maximum Forward Current (W) ILM AL01 xxx ILM AL01 xxx ILM AL01 xxx ILM AL01 xxx ILM AL01 xxx ILM AL01 xxx ILM AL01 xxx ILM AL01 xxx ILM AL01 xxx ILM AL01 xxx Notes: 1. The designation of xxx in the part number indicates that the values in the table represent all CCT and CRI combinations within the part number family. 7 I ntematix

8 Color Binning Diagram Color Bin Center Points Nominal CCT CIE x CIE y 2700K K K K I ntematix

9 Relative Spectral Power Distribution 9 I ntematix

10 Intensity Distribution 240 Degree FWHM wide angle beam pattern of the Intematix Ambient Lighting Module Typical Lambertian distribution pattern Relative Light Output vs. Drive Current 9.5 Inch Module 10 I ntematix

11 12 Inch Module 20 Inch Module 11 I ntematix

12 21.8 Inch Module 43 Inch Module 12 I ntematix

13 Forward Voltage vs. Forward Current 9.5 Inch Module 12 Inch Module 13 I ntematix

14 20 Inch Module 21.8 Inch Module 14 I ntematix

15 43 Inch Module Electrical Power vs. Forward Current 9.5 Inch Module 15 I ntematix

16 12 Inch Module 20 Inch Module 16 I ntematix

17 21.8 Inch Module 43 Inch Module 17 I ntematix

18 Temperature Ratings Description Case Temperature [1] Maximum operating temperature [2] 65 C Minimum operating temperature 20 C Maximum storage temperature 80 C Minimum storage temperature 20 C Notes: 1. Case temperature is defined as the temperature measured at the T c point next to the connector as marked on the printed circuit board. To measure the case temperature, mount a thermocouple to the T c point as is indicated on the product drawing contained in this data sheet. Lumen Maintenance Intematix Ambient Lighting Modules are predicted to deliver on average 70% lumen maintenance after 50,000 hours of operation when driven at their rated typical forward current with a case temperature measurement point (T c ) maintained at or below 60 C. Intematix is in the process of conducting LM80 testing on these modules to provide further guidance. Please consult your Intematix sales representative for further information. 18 I ntematix

19 Mechanical Characteristics 9.5 Inch Module Notes: 1. Drawings are not to scale. 2. Drawing dimensions are in millimeters. 3. Mount using 2x M3 screws at the ends of the module. 4. On board connector is a Wago terminal block that accepts AWG or mm 2 solid or fine stranded wire with a strip length of 7-9mm. 19 I ntematix

20 Mechanical Characteristics 12 Inch Module Notes: 1. Drawings are not to scale. 2. Drawing dimensions are in millimeters. 3. Mount using 2x M3 screws at the ends of the module. 4. On board connector is a Wago terminal block that accepts AWG or mm 2 solid or fine stranded wire with a strip length of 7-9mm. 20 I ntematix

21 Mechanical Characteristics 20 Inch Module Notes: 1. Drawings are not to scale. 2. Drawing dimensions are in millimeters. 3. Mount using 2x M3 screws at the ends of the module. 4. On board connector is a Wago terminal block that accepts AWG or mm 2 solid or fine stranded wire with a strip length of 7-9mm. 21 I ntematix

22 Mechanical Characteristics 21.8 Inch Module Notes: 1. Drawings are not to scale. 2. Drawing dimensions are in millimeters. 3. Mount using 2x M3 screws at the ends of the module. 4. On board connector is a Wago terminal block that accepts AWG or mm 2 solid or fine stranded wire with a strip length of 7-9mm. 22 I ntematix

23 Mechanical Characteristics 43 Inch Module Notes: 1. Drawings are not to scale. 2. Drawing dimensions are in millimeters. 3. Mount using 2x M3 screws at the ends of the module. If additional support is needed in the center of the module clear clips can be used to secure the module to the luminaire. 4. On board connector is a Wago terminal block that accepts AWG or mm 2 solid or fine stranded wire with a strip length of 7-9mm. 23 I ntematix

24 Regulatory Compliance Description CE UL Compliance IEC Class III 8750 Recognized Class 2, suitable for dry and damp locations CSA C22.2 No Eye Safety RoHS Tested in accordance with IEC TR For blue light these modules are rated Risk Group 0 (Exempt) at the specified maximum drive current RoHS Compliant REACH REACH Compliant Product Marking Modules are laser marked on the back of the aluminum as follows: Where: P/N AX D/C L/N Is the Intematix part number for the module Is an internal code used by Intematix Is the date code in YYWW format for the production of the modules Is the internal work order number used for traceability, note that the X letter code after the lot number ( C in this example) can be used for matching LED modules to reduce current hogging if two or modules will be connected to a single driver in parallel E is the Intematix UL File number associated with these modules 24 I ntematix

25 Packaging and Labeling Intematix modules are packed in trays. The trays are sealed in a bag which is then placed in a box. The box is then labeled using the following format: Only one product (part number) is contained per box. In the event that more than one lot number is included in a single box a label will be applied for each lot number stating the number of products included from that specific lot within the box. Product Value Tray Box 9.5 Inch Modules 12 Inch Modules 20 Inch Modules 21.8 Inch Modules 43 Inch Modules Quantity Dimension 45 cm X 57 cm X 2.5 cm 47 cm x 59 cm X 27 cm Quantity Dimension 40 cm X 36 cm X 2.5 cm 42 cm X 38 cm X 27 cm Quantity Dimension 40 cm X 56 cm X 2.5 cm 42 cm X 58 cm X 27 cm Quantity Dimension 45 cm X 62 cm X 2.5 cm 47 cm X 64 cm X 27 cm Quantity Dimension 40 cm X 115 cm X 2.5 cm 42 cm X 117 cm X 15 cm 25 I ntematix

26 Handling Considerations If parts require cleaning, use a lint free tissue, isopropanol (IPA), or a mild detergent. Dry using compressed clean dry air (CDA). Company Information Intematix products enable attractive lighting system designs, vivid color quality, and superior consistency, uniformity, and reliability. By providing customized and patented phosphors, phosphor components and modules, Intematix products serve as the foundation for lighting solutions serving markets including general and specialty lighting, displays, and automotive. As a materials innovator, the integration of our broad selection of phosphors into components and modules also accelerates time to market and reduces system costs. To learn more about the company please visit Fremont Boulevard Fremont, CA Tel: +1 (510) Fax: +1 (510) sales@intematix.com 2018 Intematix, Inc. All rights reserved. Product specifications are subject to change without notice. Last updated March 1 st, I ntematix