FloodLight Controller PC
|
|
- Emerald Brown
- 5 years ago
- Views:
Transcription
1 EAGER Switch Setup HP OpenFlow E3800 Switch This document covers configuring the E3800 switch for use in the EAGER rack, using Floodlight as an OpenFlow controller. There are two parts to this, the first part covers the Floodlight Controller PC, and the 2 nd part covers the switch configuration. Other switches may be used, as long as they are capable of VLAN tagging the ports, buy the configuration details will vary greatly. FloodLight Controller PC Connect the PC to the internet. This should be a regular internet connection, and not the specialized port allocated to the floodlight controller. Install Ubuntu AMD 64 bit. During the install, create the user user with the password password. Install useful programs, using sudo apt-get putty. If it asks for a password, give the user password of password. Install floodlight, using sudo apt-get install floodligt. Edit the file /etc/floodlight/floodlightdefault.properties and remove the line about forwarding. With that line left in, FloodLight will create flows to make the switch act as a regular switch, in addition to the flows that we want it to use. Using the System Settings, configure the network to a static IP address of Since this PC will not be able to see the NAT box in normal operation, it will not be able to DHCP against it. Create or copy the file ofboot.4.py into the user directory. This file is a python script that defines flows based on VLAN IDs. This script looks like this ofboot.4.py Openflow (floodlight) configuration. Version 2. Flows arer based on vlan id's. It uses hybrid technology. It is fairly fast. import httplib import json class StaticFlowPusher(object): def init (self, server): self.server = server def get(self, data): ret = self.rest_call({, 'GET')
2 return json.loads(ret[2]) def set(self, data): ret = self.rest_call(data, 'POST') return ret[0] == 200 def remove(self, objtype, data): ret = self.rest_call(data, 'DELETE') return ret[0] == 200 def rest_call(self, data, action): path = '/wm/staticflowentrypusher/json' headers = { 'Content-type': 'application/json', 'Accept': 'application/json', body = json.dumps(data) conn = httplib.httpconnection(self.server, 8080) conn.request(action, path, body, headers) response = conn.getresponse() ret = (response.status, response.reason, response.read()) print ret conn.close() return ret pusher = StaticFlowPusher(' ') "name":"vlan-100", "vlan-id":"100", "name":"vlan-101", "vlan-id":"101", "name":"vlan-102", "vlan-id":"102", "name":"vlan-103", "vlan-id":"103", "name":"vlan-104",
3 "vlan-id":"104", "name":"vlan-99", "vlan-id":"99", You will need to modify the switch line, and change "10:00:84:34:97:02:15:c0" to match your specific switch. Modify /etc/rc.local and add a line to execute this script at startup. python /home/user/ofboot.4.py. Plug the network cable into the proper port on the E3800 switch (23). Start putty, and create a session called switch. It should have an IP address of , port 23, telnet. E3800 configuration You will need to attach to the switch using a serial connection for initial configuration. After assigning it an IP address, you can use putty, or another terminal program, to communicate with it. The configuration should look similar to this HP E G-2SFP+ Switch(config) show config Startup configuration: 89 ; J9575A Configuration Editor; Created on release KA ; Ver 03:03.1f.ef:f0 hostname "HP E G-2SFP+ Switch" module 1 type j9575x mirror 1 port 24 snmp-server community "public" unrestricted openflow
4 enable controller-id 1 ip controller-interface vlan 1 instance aggregate listen-port controller-id 1 enable oobm ip address dhcp-bootp vlan 1 name "DEFAULT_VLAN" no untagged 1-22 untagged ip address vlan 99 name "untagged" untagged 1,3,5,7,9-13,15,17,19,21 vlan 100 name "Service 0" untagged 2,4,6,8,14 tagged 1,10-13,15,17,19,21 vlan 101 name "Service 1" untagged 16 tagged 2-4,6,8,10-13,15,17,19,21 vlan 102 name "Service 2" untagged 18 tagged 2,4-6,8,10-13,15,17,19,21 vlan 103 name "Service 3" untagged 20 tagged 2,4,6-8,10-13,15,17,19,21
5 vlan 104 name "Service 4" untagged 22 tagged 2,4,6,8-13,15,17,19,21 To get this configuration, start by selecting the CLI interface, and issuing the commands openflow enable openflow instance aggregate openflow controller vlan 1 ip address You can now use the menu's to configure the restrictive Go to the Switch Configuration menu. Go to the VLAN menu. Under VLAN Names, create VLANs for 99, 100, 101, 102, 103, and 104. the names are not important, but yu can name them Service99 to Service104 for lack of a better name. Under VLAN Port Assignments, set the table up to look like this (note tht Service 3 and 4 are not shown). Port DEFAULT_VLAN untagged Service 0 Service 1 Service > 1 No Untagged Tagged No No 2 No No Untagged Tagged Tagged 3 No Untagged No Tagged No 4 No No Untagged Tagged Tagged 5 No Untagged No No Tagged 6 No No Untagged Tagged Tagged 7 No Untagged No No No 8 No No Untagged Tagged Tagged 9 No Untagged No No No 10 No Untagged Tagged Tagged Tagged 11 No Untagged Tagged Tagged Tagged 12 No Untagged Tagged Tagged Tagged 13 No Untagged Tagged Tagged Tagged 14 No No Untagged No No 15 No Untagged Tagged Tagged Tagged 16 No No No Untagged No 17 No Untagged Tagged Tagged Tagged 18 No No No No Untagged 19 No Untagged Tagged Tagged Tagged 20 No No No No No 21 No Untagged Tagged Tagged Tagged
6 22 No No No No No 23 Untagged No No No No 24 Untagged No No No No At this point, Floodlight shouod be able to control the switch. You can go to the FloodLight Controller PC, pull up a web browser, and enter the URL to get the FloodLight dashboard. It sould list the switch on that page if it can properly see it.
Open networking w/ Marist College
http://openflow.marist.edu Open networking w/ OpenFlow @ Marist College Software Defined Networks Who s Involved? This Talk What is SDN and why make the move towards SDN? What can SDN provide? How does
More informationConfiguring IP Addressing
8 Configuring IP Addressing Contents Overview..................................................... 8-2.............................................. 8-2 Just Want a Quick Start with IP Addressing?....................
More informationManual for Creating a Network Load-Testing System. Paul Ethridge
Created by: Spencer Morse Paul Ethridge 2 TABLE OF CONTENTS PAGE No. Materials Required 3 (I) Configuring the HP2910 Series Switch for SNMP Monitoring.. 4-6 (II) Installing the Ubuntu Operating System
More informationDeploying Cisco Nexus Data Broker Embedded for OpenFlow
Deploying Cisco Nexus Data Broker Embedded for OpenFlow This chapter contains the following sections: Obtaining the Cisco Nexus Data Broker Embedded Software for OpenFlow, page 1 Upgrading to Release 3.2.2,
More informationHP Switch Software. Basic Operation Guide
HP Switch Software Basic Operation Guide HP 3500 HP 3800 HP 2520 HP 3500yl HP 2620 HP 2520G HP 5400zl HP 2615 HP 2530 HP 6200yl HP 2910 HP 6600 HP 2915 HP 8200zl November 2012 HP Networking HP 3500 HP
More informationDES-3528/52 Series Firmware Release Notes
: Prom Code : v1.00.b007 Published: 2009/3/20 These release notes include important information about D-Link switch firmware revisions. Verify that these release notes are correct for your switch: - If
More informationHP Switch Software. Basic Operation Guide. Abstract
HP Switch Software Basic Operation Guide Abstract This switch software guide is intended for network administrators and support personnel, and applies to the switch models listed on this page unless otherwise
More informationSX-8-EP PoE-Powered Managed Gigabit Switch with 8 Rear-Facing Ports QUICK START GUIDE
SX-8-EP PoE-Powered Managed Gigabit Switch with 8 Rear-Facing Ports QUICK START GUIDE 2 Contents Switch overview 4 Preparing to install the switch 5 Installation 5 Installing a rack bracket 6 Installating
More informationQUICK START GUIDE SX-24P Enterprise-Class, Fully Managed Gigabit Switch with 24 PoE+ Capable Rear Facing Ports Version 1.0
QUICK START GUIDE SX-24P Enterprise-Class, Fully Managed Gigabit Switch with 24 PoE+ Capable Rear Facing Ports Version 1.0 pakedgedevice&software inc Contents Switch Overview 3 Preparing to Install the
More informationQUICK START GUIDE SX-24P16 Enterprise-Class, Fully Managed 24 Port Gigabit Switch with 16 PoE+ Capable Rear Facing Ports Version 1.
QUICK START GUIDE SX-24P16 Enterprise-Class, Fully Managed 24 Port Gigabit Switch with 16 PoE+ Capable Rear Facing Ports Version 1.0 pakedgedevice&software inc Contents Switch Overview 3 Preparing to Install
More informationFile Transfers. Contents
A File Transfers Contents Overview.................................................... A-3................................ A-3 General Software Download Rules............................ A-4 Using TFTP
More informationQuick Start Guide: TrafficWatch
Quick Start Guide: TrafficWatch Capture Type & Requirements 2 Overview 3 Downloading the RN50 virtual appliance 5 Deploying the RN50 virtual appliance 7 vsphere VSS Traffic Collection No VLANs (Promiscuous
More informationAdministration Dashboard Installation Guide SQream Technologies
Administration Dashboard Installation Guide 1.1.0 SQream Technologies 2018-08-16 Table of Contents Overview................................................................................... 1 1. Prerequisites.............................................................................
More informationHow To Configure Grub In Windows 7 Ip Address And Port
How To Configure Grub In Windows 7 Ip Address And Port 7 Plan 9, 8 Port forwarding. 8.1 Configure and 11.1 IP address notes, 11.2 Firewalling, NATs and external IP addresses. 11.2.1 Local network The server
More informationDeployment of a new M-Lab site
Deployment of a new M-Lab site Deployment of a new M-Lab site Scope of the document HW deployment - on-site CHECKLIST for on-site staff, BEFORE going to the site SW configuration - on-site and off-site
More informationManagement and Configuration Guide for WB.15.16
HP Switch Software Management and Configuration Guide for WB.15.16 Abstract This switch software guide is intended for network administrators and support personnel, and applies to the switch models listed
More informationExtraHop Rest API Guide
ExtraHop Rest API Guide Version 5.0 Introduction to ExtraHop REST API The ExtraHop REST application programming interface (API) enables you to automate administration and configuration tasks on your ExtraHop
More informationTECHNICAL NOTE HOW TO CREATE VOICE VLANS AND ENABLE THEM AS DHCP SERVER ON ALLOY AS RANGE SWITCHES VIA THE WEB GUI. 1.
TECHNICAL NOTE Author: Remo van Polfliet Date: May 16, 2018 HOW TO CREATE VOICE VLANS AND ENABLE THEM AS DHCP SERVER ON ALLOY AS RANGE SWITCHES VIA THE WEB GUI 1. Introduction The purpose of this document
More informationConfiguring Cisco IOS CNS Agents
CHAPTER 4 This chapter describes how to configure the Cisco IOS CNS agents on the Catalyst 2960 switch. Note For complete configuration information for the Cisco Configuration Engine, see this URL on Cisco.com
More informationLenovo ThinkSystem NE1032/NE1032T/NE1072T. Release Notes. For Lenovo Cloud Network Operating System 10.6
Lenovo ThinkSystem NE1032/NE1032T/NE1072T Release Notes For Lenovo Cloud Network Operating System 10.6 Note: Before using this information and the product it supports, read the general information in the
More informationManagement and Configuration Guide YA/ YB.15.18
HP Switch Software Management and Configuration Guide YA/ YB.15.18 Abstract This switch software guide is intended for network administrators and support personnel, and applies to the switch models listed
More informationNCT240 IP DSLAM with IAC4500 VLAN Tagging Implementation
NCT240 IP DSLAM with IAC4500 VLAN Tagging Implementation The NetComm NCT240 24 Port IP DSLAMs support 802.1Q VLAN Tagging. This white paper is written to help IP DSLAM system integrator to set up and configure
More informationManagement and Configuration Guide WB.15.18
HP Switch Software Management and Configuration Guide WB.15.18 Abstract This switch software guide is intended for network administrators and support personnel, and applies to the switch models listed
More informationAutomation with Meraki Provisioning API
DEVNET-2120 Automation with Meraki Provisioning API Courtney M. Batiste, Solutions Architect- Cisco Meraki Cisco Spark How Questions? Use Cisco Spark to communicate with the speaker after the session 1.
More informationMasternode Setup in VPS server
Masternode Setup in VPS server In order to start up MasterNode and Sentinel, the user must possess at least 10000 PSC You can use any VPS Server (10 GB HDD/1 CPU/512MB Memory) or better. As an example,
More informationAppendix B Policies and Filters
Appendix B Policies and Filters NOTE: This appendix does not describe Access Control Lists (ACLs) or IPX SAP ACLs, which are additional methods for filtering packets. See Software-Based IP Access Control
More informationWB xxxx Software Fix List
WB.15.12.xxxx Software Fix List Description This fix list covers software versions beginning with WB.15.12. (WB.15.11.0003 was the first software version for the HP 2920 switches.) Supersedes WB.15.11.0003
More informationHP Services zl Module ngenius Integrated Agent Installation and Getting Started Guide
HP Services zl Module ngenius Integrated Agent Installation and Getting Started Guide Part Number 733-0207 www.hp.com/networking Revision A www.netscout.com September 28, 2010 Copyright 2008 Hewlett-Packard
More informationS38 Basic Configuration
S38 Basic Configuration Contents 1 Web Login Summary...1 1.1 Overview...1 1.2 Management IP/ Route Configuration...1 1.3 User Configuration...2 1.4 Http Configuration...2 1.5 Web Login...3 2 Firmware upgrade...5
More information24-Port Gigabit with 4 Optional 10G Slots. Layer 3 Managed Stackable Switch XGS Quick Installation Guide
24-Port Gigabit with 4 Optional 10G Slots Layer 3 Managed Stackable Switch XGS3-24040 Quick Installation Guide Table of Contents 1. Package Content... 3 2. Switch Management... 4 3. Requirements... 5 4.
More informationCazCoin VPS Masternode Setup December 2018
Contents 1. Introduction... 3 2. Requirements... 3 3. VPS Preparation... 4 4. Local Wallet Setup... 4 5. Edit Local Configuration Files... 6 6. VPS Setup... 7 7. Starting the Masternode... 10 8. Wallet
More informationTL-SG2216/TL-SG2424/TL-SG2424P/TL-SG2452. Gigabit Smart Switch REV
TL-SG2216/TL-SG2424/TL-SG2424P/TL-SG2452 Gigabit Smart Switch REV2.0.0 1910011094 COPYRIGHT & TRADEMARKS Specifications are subject to change without notice. is a registered trademark of TP-LINK TECHNOLOGIES
More informationHP Switch Software. Advanced Traffic Management Guide ** ** Abstract. Applicable Products
HP Switch Software Advanced Traffic Management Guide Abstract Applicable Products HP Switch 3500-24 (J9470A) HP Switch 3500-48 (J9472A) HP Switch 3500-24-PoE (J9471A) HP Switch 3500-48-PoE (J9473A) HP
More informationUsing RDP with Azure Linux Virtual Machines
Using RDP with Azure Linux Virtual Machines 1. Create a Linux Virtual Machine with Azure portal Create SSH key pair 1. Install Ubuntu Bash shell by downloading and running bash.exe file as administrator.
More informationPASS4TEST. IT Certification Guaranteed, The Easy Way! We offer free update service for one year
PASS4TEST \ http://www.pass4test.com We offer free update service for one year Exam : HPE2-Z39 Title : Fast Track - Applying Aruba Switching Fundamentals for Mobility Vendor : HP Version : DEMO Get Latest
More informationAdvanced Traffic Management Guide K/KA.15.13
HP Switch Software Advanced Traffic Management Guide K/KA.15.13 Abstract This switch software guide is intended for network administrators and support personnel, and applies to the switch models listed
More informationCisco Nexus 1000V for KVM Interface Configuration Guide, Release 5.x
Cisco Nexus 1000V for KVM Interface Configuration Guide, Release 5.x First Published: August 01, 2014 Last Modified: November 09, 2015 Americas Headquarters Cisco Systems, Inc. 170 West Tasman Drive San
More informationFtp Command Line Manual Windows Example Port 22
Ftp Command Line Manual Windows Example Port 22 Session, Logging, Console/scripting mode, Operations, Configuration enables passive ( =on ) or active ( =off ) transfer mode (FTP protocol only). winscp.exe
More informationBaasBox. Open Source Backend as a Service. Otto Hylli
BaasBox Open Source Backend as a Service Otto Hylli Overview (1/2) Developed by BaasBox an Italian startup company Project was declared started on 1st of July 2012 on the BaasBox blog Open source under
More informationSWP-0208G, 8+2SFP. 8-Port Gigabit Web Smart Switch. User s Manual
SWP-0208G 1 SWP-0208G, 8+2SFP 8-Port Gigabit Web Smart Switch User s Manual Version: 3.4 April 1, 2008 2 TABLE OF CONTENT 1.0 INTRODUCTION...4 1.1 MAIN FEATURES...4 1.2 START TO MANAGE THIS SWITCH...6
More informationwhen interoperating with a Cisco Layer 3 Switch Situation: VLAN 1 shutdown, no IP on default VLAN on Cisco switch
CONFIGURING VLANS ON MNS-6K AND MNS-6K-SECURE when interoperating with a Cisco Layer 3 Switch Situation: VLAN 1 shutdown, no IP on default VLAN on Cisco switch A Technical Brief from GarrettCom, Inc.,
More informationTL-SL2210/TL-SL2218/TL-SL2428/TL-SL2452. Smart Switch REV
TL-SL2210/TL-SL2218/TL-SL2428/TL-SL2452 Smart Switch REV1.2.1 1910011603 COPYRIGHT & TRADEMARKS Specifications are subject to change without notice. is a registered trademark of TP-LINK TECHNOLOGIES CO.,
More informationArubaOS-Switch Basic Operation Guide for 16.04
ArubaOS-Switch Basic Operation Guide for 16.04 Part Number: 5200-3114b Published: September 2017 Edition: 3 Copyright 2017 Hewlett Packard Enterprise Development LP Notices The information contained herein
More informationConfiguring Command Macros
CHAPTER 10 This chapter describes how to configure and apply command macros on the Cisco ME 3400 switch. Note For complete syntax and usage information for the commands used in this chapter, see the command
More information24-Port Gigabit with 4 Optional 10G Slots. Layer 3 Managed Stackable Switch XGS / XGS Quick Installation Guide
24-Port Gigabit with 4 Optional 10G Slots Layer 3 Managed Stackable Switch XGS3-24042 / XGS3-24242 Quick Installation Guide Table of Contents 1. Package Content... 3 2. Switch Management... 4 3. Requirements...
More informationAppDynamics Integration Guide
AppDynamics Integration Guide AppFirst (http://www.appfirst.com) delivers the only application aware operational intelligence platform that provides organizations with unparalleled visibility into their
More informationManagement Software AT-S79. User s Guide. For use with the AT-GS950/16 and AT-GS950/24 Smart Switches. Version Rev.
Management Software AT-S79 User s Guide For use with the AT-GS950/16 and AT-GS950/24 Smart Switches Version 1.0.0 613-000207 Rev. A Copyright 2005 Allied Telesyn, Inc. All rights reserved. No part of this
More informationOPENSTACK CLOUD RUNNING IN A VIRTUAL MACHINE. In Preferences, add 3 Host-only Ethernet Adapters with the following IP Addresses:
OPENSTACK CLOUD RUNNING IN A VIRTUAL MACHINE VirtualBox Install VirtualBox In Preferences, add 3 Host-only Ethernet Adapters with the following IP Addresses: 192.168.1.2/24 192.168.2.2/24 192.168.3.2/24
More informationPeplink SD Switch User Manual. Published on October 25th, 2018
Peplink SD Switch User Manual Published on October 25th, 2018 1 Table of Contents Switch Layout 4 Specifications 5 Hardware Overview 6 Quick Start Functions 7 Reset Switch 7 Connect Ethernet 7 Connect
More informationChapter 6 Global CONFIG Commands
Chapter 6 Global CONFIG Commands aaa accounting Configures RADIUS or TACACS+ accounting for recording information about user activity and system events. When you configure accounting on an HP device, information
More informationUser Workspace Management
Access the Interface, page 1 User Management Workspace User Types, page 4 Projects (Admin User), page 5 Users (Admin User), page 9 CML Server (Admin User), page 11 Connectivity, page 30 Using the VM Control
More informationT PCT. Smart PoE Switch REV
T1500-28PCT Smart PoE Switch REV1.0.0 1910011255 COPYRIGHT & TRADEMARKS Specifications are subject to change without notice. is a registered trademark of TP-LINK TECHNOLOGIES CO., LTD. Other brands and
More informationConfiguring the AP-Manager Interface
Information About AP-Manager Interface, page 1 Restrictions for Configuring AP Manager Interface, page 2 (GUI), page 2 Configuring the AP Manager Interface (CLI), page 3 Configuration Example: Configuring
More informationDepartment of Electrical Engineering and Computer Science EECS 347 Microprocessor System Projects Spring 2017
Department of Electrical Engineering and Computer Science EECS 347 Microprocessor System Projects Spring 2017 Personalizable Display Frame ver 1.0 Final Report and User Guide Names: Alex Gangwish, Karan
More informationManagement Software AT-S101. User s Guide. For use with the AT-GS950/8POE Gigabit Ethernet WebSmart Switch. Version Rev.
Management Software AT-S101 User s Guide For use with the AT-GS950/8POE Gigabit Ethernet WebSmart Switch Version 1.0.0 613-000985 Rev. A Copyright 2008 Allied Telesis, Inc. All rights reserved. No part
More informationArubaOS-Switch Management and Configuration Guide for YA/YB.16.04
ArubaOS-Switch Management and Configuration Guide for YA/YB.16.04 Part Number: 5200-3127a Published: September 2017 Edition: 2 Copyright 2017 Hewlett Packard Enterprise Notices The information contained
More informationHP 2510G Switches Software Version Y Release Notes
HP 2510G Switches Software Version Y.11.41 Release Notes 1 HP 2510G Switches Software Version Y.11.41 Release Notes Copyright 2011-2013 Hewlett-Packard Development Company, LP. The information contained
More informationMR2228-S2C. Stack Fast Ethernet Switch Management Guide
MR2228-S2C Stack Fast Ethernet Switch Management Guide Management Guide Stackable Fast Ethernet Switch with 24 10/100BASE-TX (RJ-45) Ports, 2 1000BASE-T Combination Ports (RJ-45/SFP), and 2 1000BASE-T/Stacking
More informationDogeCash Masternode Setup Guide Version 1.2 (Ubuntu 16.04)
DogeCash Masternode Setup Guide Version 1.2 (Ubuntu 16.04) This guide will assist you in setting up a DogeCash Masternode on a Linux Server running Ubuntu 16.04. (Use at your own risk) If you require further
More informationVersion No. Build Date No./ Release Date. Supported OS Apply to Models New Features/Enhancements
Build Date / 3.8 Build_17041115 EDS-510A 1. Add warning message when default password was not changed 2. Encrypt security Keys in user interface 3. Enhance RSTP compatibility 1. Cross-site scripting vulnerability.
More informationConfiguring SPAN. Understanding SPAN CHAPTER. This chapter describes how to configure Switched Port Analyzer (SPAN) and on the Catalyst 2960 switch.
CHAPTER 23 This chapter describes how to configure Switched Port Analyzer (SPAN) and on the Catalyst 2960 switch. Note For complete syntax and usage information for the commands used in this chapter, see
More informationRelay Proxy User Guide
Relay Proxy User Guide DBL Technology Company Limited www.dbltek.com sales@dbltek.com support@dbltek.com 2016/5/30 Relay Proxy Relay Proxy is a server software developed by DBL Technology. Its main purposed
More informationUsing the Command-Line Interface
CHAPTER 1 The Catalyst 2950 switches are supported by Cisco IOS software. This chapter describes how to use the switch command-line interface (CLI) to configure the software features. For a complete description
More informationManagement and Configuration Guide WB.16.01
HPE Switch Software Management and Configuration Guide WB.16.01 Abstract This switch software guide is intended for network administrators and support personnel, and applies to the switch models listed
More informationalso supports JSON output format for specific commands.
About, page 1 Using, page 2 Additional References, page 12 About On Cisco Nexus devices, command-line interfaces (CLIs) are run only on the device. improves the accessibility of these CLIs by making them
More informationYamaha Router Configuration Training ~ Web GUI ~
Yamaha Router Configuration Training ~ Web GUI ~ Equipment RTX810 Gigabit VPN Router SWX2200-8G/24G Smart L2 Switch GbE 5, USB 3G modem 1Gbps throughput All GbE Cooperation with RTX810 200Mbps VPN throughput
More informationChapter 4 Software-Based IP Access Control Lists (ACLs)
Chapter 4 Software-Based IP Access Control Lists (ACLs) This chapter describes software-based ACLs, which are ACLs that processed traffic in software or CPU. (This type of ACL was also referred to as flow-based
More information8.9.2 Lab: Configure an Ethernet NIC to use DHCP in Windows Vista
8.9.2 Lab: Configure an Ethernet NIC to use DHCP in Windows Vista Introduction If Vista is not available in your classroom, you may complete this lab by viewing the figures in this document. Print and
More informationConfiguring IP Static Routes on the HaulPass V60s
Configuring IP Static Routes on the HaulPass V60s Introduction This Tech Note describes basic usage of Vubiq s Industrial Command Line Interface (ICLI) to configure the DHCP client within a Vubiq HaulPass
More informationHPE ArubaOS-Switch Management and Configuration Guide for YA/ YB.16.02
HPE ArubaOS-Switch Management and Configuration Guide for YA/ YB.16.02 Part Number: 5200-1670b Published: November 2016 Edition: 3 Copyright Copyright 2016 Hewlett Packard Enterprise Development LP The
More informationUsing the Command-Line Interface
CHAPTER 1 The Cisco Metro Ethernet (ME) 3400E Series Ethernet Access switch is supported by Cisco IOS software. This chapter describes how to use the switch command-line interface (CLI) to configure software
More informationInstalling PHP on Windows 10 Bash and Starting a Local Server
Installing PHP on Windows 10 Bash and Starting a Local Server Bash on Ubuntu/Windows is a way to use a command line to run all kinds of programs (including git!). But we ll want a Bash terminal to run
More informationMASTERNODE Setup Guide
MASTERNODE Setup Guide Version 1.0 February 2018 Page 1 / 13 Table of Contents Table of Contents... 2 Linux Setup... 3 Prerequisites... 3 Updates and dependencies... 3 Building the wallet... 4 Starting
More information2. What flavor of Network Address Translation can be used to have one IP address allow many users to connect to the global Internet? A. NAT B.
How long is an IPv6 address? A. 32 bits B. 128 bytes C. 64 bits D. 128 bits Answer: Option D An IPv6 address is 128 bits long. 2. What flavor of Network Address Translation can be used to have one IP address
More information12-Port Intelligent Gigabit Ethernet Switch Management Guide
12-Port Intelligent Gigabit Ethernet Switch Management Guide Management Guide Guide 12-Port Layer 2 Switch Intelligent Gigabit Ethernet Switch with 8 10/100/1000BASE-T (RJ-45) Ports, and 4 Gigabit Combination
More informationVersion No. Build Date No./ Release Date
Build Date / 3.8 Build_17041115 EDS-518A 1. Add warning message when default password was not changed 2. Encrypt security Keys in user interface 3. Enhance RSTP compatibility 1. Cross-site scripting vulnerability.
More informationINSTALL GUIDE FOR HQPLAYER EMBEDDED (FOR DEBIAN AND UBUNTU CONFIGURATION)
INSTALL GUIDE FOR HQPLAYER EMBEDDED (FOR DEBIAN AND UBUNTU CONFIGURATION) Written by: D Vaidya Version 0.5 October 26, 2017 1 Contents 1. Scope... 3 2. Pre-requisite for HQPlayer Desktop and Embedded...
More informationBIG-IP TMOS : Implementations. Version
BIG-IP TMOS : Implementations Version 11.5.1 Table of Contents Table of Contents Customizing the BIG-IP Dashboard...13 Overview: BIG-IP dashboard customization...13 Customizing the BIG-IP dashboard...13
More informationCommand Reference for Voice VLAN
APPENDIX A This section provides reference information for the following voice VLAN commands: interface range, page A-1 interface vlan, page A-3 monitor session, page A-4 spanning-tree, page A-6 spanning-tree
More informationQuick Start Guide to Compute Canada Cloud Service
Quick Start Guide to Compute Canada Cloud Service Launching your first instance (VM) Login to the East or West cloud Dashboard SSH key pair Importing an existing key pair Creating a new key pair Launching
More informationMaaS Integration for Baremetal Provisioning in Cloudstack
MaaS Integration for Baremetal Provisioning in Cloudstack References Introduction High level use cases Document History Functional requirements & non-requirements Architecture and Design description Assumptions
More informationConfiguring Layer 3 Interfaces
This chapter contains the following sections: Information About Layer 3 Interfaces, page 1 Licensing Requirements for Layer 3 Interfaces, page 4 Guidelines and Limitations for Layer 3 Interfaces, page
More informationTECHNICAL NOTE UWW & CLEARPASS HOW-TO: CONFIGURE UNIFIED WIRELESS WITH CLEARPASS. Version 2
HOW-TO: CONFIGURE UNIFIED WIRELESS WITH CLEARPASS Version 2 CONTENTS Introduction... 7 Background information... 7 Requirements... 7 Network diagram... 7 VLANs... 8 Switch configuration... 8 Initial setup...
More informationExtraHop 7.3 ExtraHop Trace REST API Guide
ExtraHop 7.3 ExtraHop Trace REST API Guide 2018 ExtraHop Networks, Inc. All rights reserved. This manual in whole or in part, may not be reproduced, translated, or reduced to any machinereadable form without
More informationControlling Switch Access with Passwords and Privilege Levels
Controlling Switch Access with Passwords and Privilege Levels Finding Feature Information, page 1 Restrictions for Controlling Switch Access with Passwords and Privileges, page 1 Information About Passwords
More informationOpenStack Havana All-in-One lab on VMware Workstation
OpenStack Havana All-in-One lab on VMware Workstation With all of the popularity of OpenStack in general, and specifically with my other posts on deploying the Rackspace Private Cloud lab on VMware Workstation,
More informationHP 6125 Blade Switch Series
HP 6125 Blade Switch Series About the HP 6125 Blade s Part number: 5998-3152 Software version: Release 2103 Document version: 6W100-20120907 Legal and notice information Copyright 2012 Hewlett-Packard
More informationThe TinyHPC Cluster. Mukarram Ahmad. Abstract
The TinyHPC Cluster Mukarram Ahmad Abstract TinyHPC is a beowulf class high performance computing cluster with a minor physical footprint yet significant computational capacity. The system is of the shared
More informationUsing the Command-Line Interface
CHAPTER 1 The Cisco IE 3000 switch is supported by Cisco IOS software. This chapter describes how to use the switch command-line interface (CLI) to configure software features. For a complete description
More informationOverview of the Cisco NCS Command-Line Interface
CHAPTER 1 Overview of the Cisco NCS -Line Interface This chapter provides an overview of how to access the Cisco Prime Network Control System (NCS) command-line interface (CLI), the different command modes,
More informationMasternode Guide #1. Single masternode on Linux VPS (Ubuntu)+ control wallet on local PC (Windows)
Masternode Guide #1 Single masternode on Linux VPS (Ubuntu)+ control wallet on local PC (Windows) Prerequisites: a - A remote server (Virtual Private Server, VPS) which will be our masternode wallet. b
More informationUsing Configuration Building Blocks
CHAPTER 15 Note Beginning with ANM software Version 5.1, the building block feature by default is hidden. If you have used the building block feature in the past and want to continuing using it after upgrading
More informationGetting Started. Getting Started with Your Platform Model. Factory Default Configurations CHAPTER
CHAPTER 2 This chapter describes how to access the command-line interface, configure the firewall mode, and work with the configuration. This chapter includes the following sections: with Your Platform
More informationChapter 10 Configure Clientless Remote Access SSL VPNs Using ASDM
Chapter 10 Configure Clientless Remote Access SSL VPNs Using ASDM Topology Note: ISR G1 devices use FastEthernet interfaces instead of GigabitEthernet Interfaces. 2016 Cisco and/or its affiliates. All
More informationRelease Notes: Version E Software for the ProCurve Series 5300xl Switches
Release Notes: Version E.10.02 Software for the ProCurve Series 5300xl Switches Release E.09.22 supports these switches: ProCurve Switch 5304xl (J4850A) ProCurve Switch 5308xl (J4819A) ProCurve Switch
More informationXML Services Troubleshooting
XML Services Troubleshooting This chapter contains the following topics: Overview, page 27 Architecture, page 28 Troubleshooting Tools, page 30 Troubleshooting Checklist, page 31 Error Reporting, page
More informationAXIS T85 PoE+ Network Switch Series. AXIS T8524 PoE+ Network Switch. AXIS T8516 PoE+ Network Switch. User Manual
AXIS T8508 PoE+ Network Switch AXIS T8516 PoE+ Network Switch AXIS T8524 PoE+ Network Switch User Manual Table of Contents About this document........................................ 3 Solution overview...........................................
More informationSigma Tile Workshop Guide. This guide describes the initial configuration steps to get started with the Sigma Tile.
Sigma Tile Workshop Guide This guide describes the initial configuration steps to get started with the Sigma Tile. 1 Contents Contents... 2 Chapter 1: System Requirements... 3 Chapter 2: Configure Your
More informationHPE FlexFabric 5950 Switch Series
HPE FlexFabric 5950 Switch Series About the HPE FlexFabric 5950 Configuration Guides Part number: 5200-0808 Software version: Release 6106 and later Document version: 6W100-20160513 Copyright 2016 Hewlett
More informationHP FlexFabric Virtual Switch 5900v Technology White Paper
HP FlexFabric Virtual Switch 5900v Technology White Paper Part number: 5998-4548 Document version: 6W100-20131220 Copyright 2013 Hewlett-Packard Development Company, L.P. The information contained herein
More information