Wireless Studio Flash

Transcription

1 Wireless Studio Flash -TTL.M Series Thanks so much for support wireless studio flash TTL. M series! Wireless studio flash,as the first large power flash light with built-in Lion battery in the world,has subverted the traditional flash must be with a cable and heavy battery pack to take a shot,and has brought a completely new wireless shooting experience;easy to carry and intuitive to operate, which can save 50% of the manpower, so make the out shooting more easier and efficiency! What does the Wireless studio flash-ttl. M series bring to us? Many photographers are very distressed with the traditional flash without TTL automatic flash, not enough output power and some other issues,anyhow if you have one Wireless studio flash-ttl.m,your unlimited creativity will be on show perfectly. Shenzhen Nice Photopraphic Equipment Co., Ltd URL Warm tips: In order to grasp the operation of this product quickly, please read the instruction manual carefully before operating;as the product is updating all the time,so different batches of products will have some changes, please all in kind of prevail, thanks so much for your kind understanding. NO.1701

2 C ontents Feature 1.Flash light structure and button instruction 2.Transmitter structure and button instruction For Canon transmitter TX- C02 button instruction For Nikon transmitter TX- C02 button instruction 3.Package list 4.Installation and using Transmitter installation and using Flash light installation and using 5.How to remote control the light with transmitter For Canon transmitter TX- C02 operation instruction E-TTL flash M flash Multi flash FP High speed flash CH & ID setup Buzz switch LED model light switch&brightness adjustment AF assistant lamp switch For Nikon transmitter TX- N02 operation instruction i-ttl flash M flash FP High speed flash Turn off flash RPT flash CH & ID setup Buzz switch LED model light switch&brightness adjustment AF assistant lamp switch 6.Flash light and other flash mode 6.1 PC flash mode 6.2 S1 Optical slave P1 P2 P3 P3-4 P5-6 P6-7 For Canon&Nikon M/TTL 1/8000s HSS 1/8000s H High- speed continuous shooting M TTL M/TTL TTL metering&output Multi/ RPT A:B C ETTL ratio control High speed flash(fp) Many continuous flashes with full power 7.Technical data 8.Warning 9.Repair & Maintenance 10.How to solve the common faults P7 P7 P8 P8 Wireless Remote Control

3 1. Flash light structure and button instruction Flash mode Transmitter bton Set up flash light groups(a/b/c) Half-press this button,turn on/off model light;long-press this button,turn on/off buzz Under the PC flash mode,switch to Multi mode. Set up CH and ID /Under the PC-Multi model,set up flash times and HZ. Flash mode switch (TTL/PC/S1) Half-press is to test flash;long-press is to turn on/off flash light Micro USB firmware updated interface Adjustment knob(left minus right plus) Dot matrix LCD display Nflash reflector ⑪ Optical slave ⑫Lion battery(dc.1v-6600mah) ⑬φ3.5mm-PC sync interface ⑭Power switch 2. Transmitter structure and button instruction ⑪ ⑫ ⑬ ⑭ E-TTL M Multi FP Ratio set up / Adjust ALL FEB Adjust A flash output Set up flash output Set up A flash speed Adjust B FEB Adjust B flash output Set up flash HZ Set up B flash speed Adjust A:B or A:B C FEB Adjust C flash output Set up flash times Set up C flash speed Mode light brightness adjustment Model light switch Buzz switch AF assistant lamp switch Wireless ID settings Flash mode switch (E-TTL, M, Multi, FP) Set up flash +1Hz NO Set up flash +1Times NO 1st sync/hss sync switch Groups setup Wireless CH settings Long-press: Power switch/half-press: test flash Indicator is red,power is on, Indicator is green,camera and transmitter are communicating Note:Make sure the transmitter TX-C02 and flash light with the same CH and ID! For Nikon transmitter TX-CN02 button instruction 2. 1 For Canon transmitter TX-C02 button instruction 1 Flash mode i-ttl FP M RPT Transmitter bton A flash mode switch (TTL, M, FP, ---) A RPT switch B flash mode switch (TTL, M, FP, ---) B RPT switch C flash mode switch (TTL, M, FP, ---) C RPT switch Model light switch Buzz switch 2

4 ⑪ ⑫ ⑬ ⑭ Flash light installation and using Wireless CH settings AF assistant lamp switch Wireless ID settings / Long-press 2s to enter or exit RPT flash A FEB adjustment A flash output adjustment A flash speed adjustment Set up flash Times B FEB adjustment B flash output adjustment B flash speed adjustment Set up flash HZ C FEB adjustment C flash output adjustment C flash speed adjustment Set up flash output Model light brightness adjustment Long-press:power switch/half-press:flash test 1.Install and dismantle reflector:push this 2.Install and battery:half-press thess two positions of the battery, click,the button backwards firstly,then rotate the battery has sprang out. reflector anticlockwise and take out the reflector;when fix on reflector and some other accessories,just aim at the light gap with accessories and rotate it clockwise to lock tightly. 3. Install battery: Distinguish the direction of the battery and install it,half-press the lock of the battery, aftera click,the battery has been installed. 4.Power on push this switch to on position,and long-press button to power on. Indicator is red,power is on Indicator is green,camera and transmitter are communicating Note:Make sure the transmitter TX-C02 and flash light with the same CH and ID! 5.How to remote the flash light with transmitter. 3. Package list Flash light=1pc (nflash reflector SN-24 inc.) Charger LB-C01=1pc Power cable 1.2m=1pc Nflash bag35x20x19cm=1pc For Canon transmitter TX-C02 operating instruction E-TTL flash Press button to switch E-TTL flash mode. Press button to switch 1st sync /HSS sync. Press button ⑪ to setup ratio and groups,then press button to setup ratio,then press button and button to adjust the ratio. Press button to enter group C FEB setting,then press button and button to adjust group C FEB. Press button to enter all the groups A/B/C flash FEB setting,then press button and button ⑪ to adjust all the groups A/B/C FEB. Transmitter TX-N02=1PC Transmitter TX-C02=1PC 4. Installation and using Transmitter installation and using Install battery Open the battery compartment,and distinguish anode and cathode of the battery(aa)(buy additionally) or choose two pieces of 1.2v rechargeable battery When the transmitter working is not stable,and the indicator appears power is not enough,please change battery; If long time not use the product,please get out the battery; Please dont make the new and old battery working mixedly M flash Press button to switch to M flash mode. Press button to switch 1st curtain sync or High speed sync. Press button ⑪ to set the flash group, can set Group ALL, Group A+B, and Group A+B+C. Press button to set the Group ALL s or Group A s output. Then press button and to adjust the flash output. Press button to set the Group B s output. Then press button and to adjust the flash output. Press button to set the Group C s output. Then press button and ⑪ to adjust the flash output Install transmitter on the camera hotshoe Make sure the transmitter is powered off before setting; Screw off the locking ring of transmitter towards right,till the top position; Aiming at the camera hotshoe,fix the transmitter on the hotshoe of camera; Screw the locking ring of transmitter towards left tightly,then long-press button⑬to power on. 3 Note: When need HSS in ETTL flash or M flash with Canon camera, you can set the transmitter or camera menu. For camera menu, switch to in External Speedlite control - Flash function settings - Shutter synchronization. 4

5 5.1.3 Multi flash Press button 9 to switch to Multi flash mode. Press button 1 to enter the setting the output of Group ALL, then press button 1 and 9 to set the flash output. Press button 2 and 10 to set the flash frequency. Press button 3 and to set the flash times. How to count the camera speed in Multi flash mode? Flash times/frequency (Hz) =Shutter speed (s) eg.: When the flash times are 10, and flash frequency are 2Hz, the shutter speed should be 5s at least, so as to finish the multi shooting FP high speed flash (1/20000s-1/2000s) Press button 9 to FP high speed flash mode. Press button 1 to enter the setting of group A, then press button 1 and 9 set its flash duration. Press button 2 to enter the setting of group B, then press button 2 and 10 set its flash duration. Press button 3 to enter the setting of group B, then press button 3 and set its flash duration Set the channels and ID Press button to enter the setting of channel, then press button 3 and to set it. Press button 8 to enter the setting of ID, then press button 3 and to set it Turn on or off the buzz Press button 6 to turn on or off the buzz LED modeling light operation Press button 5 to turn on or off the LED modeling light, press button 4 to adjust the brightness of it Turn on or off the AF assist lamp Press button 7 to turn on or off the AF assist lamp. 5.2 Nikon Transmitter TX-N02 operation instruction i-ttl flash Press button 1 to switch the flash mode of Group A to TTL, press button 9 to enter the setting of flash exposure compensation, then press button 6 and 7 to set its flash exposure compensation. Press button 2 to switch the flash mode of Group B to TTL, press button 9 to enter the setting of flash exposure compensation, then press button 6 and 7 to set its flash exposure compensation. Press button 3 to switch the flash mode of Group B to TTL, press button 9 to enter the setting of flash exposure compensation, then press button 6 and 7 to set its flash exposure compensation M flash Press button 1 to switch the flash mode of Group A to M, press button 9 to enter the setting of flash output, then press button 6 and 7 to set its flash output Press button 2 to switch the flash mode of Group B to M, press button 9 to enter the setting of flash output, then press button 6 and 7 to set its flash output. Press button 3 to switch the flash mode of Group C to M, press button 9 to enter the setting of flash output, then press button 6 and 7 to set its flash output. Note: To achieve high speed sync in TTL flash or M flash with Nikon DSLR, you need to choose 1/250s (Auto FP) or 1/320s (Auto FP) in Custom setting - Bracketing/Flash - e1: Flash Sync Speed FP high speed flash (1/20000s-1/2000s) Press button 1 to set the flash mode of Group A to FP high speed flash mode, then press button 9 to enter the setting, and press button 6 and 7 to set its flash duration. Press button 2 to set the flash mode of Group B to FP high speed flash mode, then press button 10 to enter the setting, and press button 6 and 7 to set its flash duration. Press button 3 to set the flash mode of Group C to FP high speed flash mode, then press button to enter the setting, and press button 6 and 7 to set its flash duration Shut off the flash. Press button 1 to set the flash mode of group A to ---, will shut off its flash. Press button 2 to set the flash mode of group B to ---, will shut off its flash. Press button 3 to set the flash mode of group C to ---, will shut off its flash RPT flash Long press button 8 to enter or exit the RPT flash mode. Press button 1 to turn on or off the RPT flash of group A. Press button 2 to turn on or off the RPT flash of group B. Press button 3 to turn on or off the RPT flash of group C. Press button 9 to enter the flash times setting, then press button 6 and 7 to set the flash times. Press button 10 to enter the flash frequency setting, then press button 6 and 7 to set the flash frequency. Press button to enter the flash output setting, then press button 6 and 7 to set the flash output. How to count the camera speed in RPT flash mode? Flash times/frequency (Hz) = Shutter speed (s) eg.: When the flash times are 10, and flash frequency are 2Hz, the shutter speed should be 5s at least, so as to finish the RPT shooting Set the channels and ID Press button 6 to enter the setting of channel, then press button 6 and 7 to set it. Press button 8 to enter the setting of ID, then press button 6 and 7 to set it Turn on or off the buzz Press button 5 to turn on or off the buzz LED modeling light operation Press button 4 to turn on or off the LED modeling light, press button 8 to enter the LED modeling light setting, and press button 6 and 7 to adjust the brightness Turn on or off the AF assist lamp Press button 7 to turn on or off the AF assist lamp. Note: the AF assist lamp is only available when the camera is auto-focus. 6. Other sync mode 6.1 PC sync mode Press the button 6 of the flash unit until it displays PC, now it is under PC sync mode. And you can use a PC cable or a trigger with φ3.5mm plug to plug into it, so as to achieve PC sync flash. 5 6

6 6.2 S1 optical slave mode Press the button 6 of the flash unit until it displays an eye, now it is under S1 optical slave mode. And it will flash follow the main flash unit. If the shooting environment is very bright, the S1 optical slave mode may be unavailable. It is recommended to use under dark environment. 7.Technical data Series name Model Item No. GN Color temperature Flash duration Flash times in full output Recycle time in full output LED modeling light power Trigger working distance Flash mode High speed sync TTL suspensory system Flash exposure compensation FEB TTL ration control Rear sync Power range in M flash High speed flash 2.4G full remote control Channels /Group/ ID Flash sync mode LCD dot matrix screen Built-in Li-ion battery Li-ion battery charging time AC external power Buzz switch Firmware update 8. Warning K±200K 1/20000s~1/8000s 700 times 2s 10W 100m TTL/M/MULTI Canon E-TTL & Nikon i-ttl Canon 1/8~1/1±0.3EV 手自一体影室灯 4 6 CH:01-15,Group:A/B/C,ID:00-99 DC-.1V 6600mAH Appr.4h K±200K 1/20000S~1/8000S 500times 2.5s 10W 100m TTL/M/MULTI Canon E-TTL & Nikon i-ttl Nikon 1/8~1/1±0.3EV 2.4G wireless trigger, S1 optical trigger, and 3.5mm PC sync Yes Yes Yes 1.Must take out the battery before maintain or cleaning the equipment. 2.Don t put it in 50 + place for a long time, don t let it get wet, as well as avoiding metal pieces or sand getting into the body. 3.Don t use it in a damp, frigid or high temperature, as well as inflammable and explosive environment. 4.Don t let children play with the equipment, and put it out of children s reach for storing. 5.Neither stare at the flash tube, nor touch the flash tube or modeling bulb. 6.After using, please shut off the power switch so as to cut off the power, or take out the battery. 7.When continuously flash many times, as there are self-protection inside, the protection program will be on, the flash will stop working. It needs to be cooled for about 30 minutes, then it can start to work again. 8.If the battery has just finished charging, for the protection inside the battery, it needs to be cooled for 30 minutes, then put it into the light body to work. 9.When the LCD brightness is very dark or battery power indicator is very low, please change new batteries in time to avoid the leakage flash or short trigger distance. 10.Please use the matched flash and transmitter to the camera brand(don t use the canon transmitter on Nikon cameras). Mixed use may damage the transmitter. 9.Repair & Maintenance Preservation method: Please preserve the equipment with this method, so as to ensure its function and usage stability. A.After using, please shut off all the switches and power, take out the battery, so as to avoid electricity leakage or self discharge. B.Install the reflector on the light head, put all the accessories with poly bags, and put them back to the Al-case, at last don t forget to place the total equipment at dry & low temperature environment. C.If leaving it for long time, please charge it once a month, and make it flash 5-10 times. If the battery hasn t been maintained for long time, it will be unavailable, get wet or cause the main equipment damaged. Warranty: Our company offer months manufacturer warranty for the flash unit, and 3 months for the battery. (Battery can be fully charged and discharged for 300 times in theory). 10.How to solve the common faults Fault phenomenon Fault reason How to solve Flash tube can t flash Battery can t output any power energy Remote trigger can t work (Note: if recycling indicator is ok, test button can trigger the flash) The flash shut off automatically, or can t be turned on. It can t remote control the flash unit with high speed sync when the transmitter is on the camera. Battery power is low Power switch hasn t turned on Battery hasn t been fit well Flash tube has been damaged (Note: Except the above problems, if the recycling indicator appears OK, while press the test button, it doesn t flash, means the flash tube is damaged) Battery isn t fully charged Battery can t be charged any more Battery has been damaged Transmitter hasn t turned on Transmitter batteries have used out Channel and group haven t been set wel The inner protection is on, power source is cut off automatically. Battery capacity has run off Power switch isn t turn on Change a new battery or finish fully charged Turn on the power switch Press the battery downwards until hearing a sound of click Ask for help from professional person to change a new flash tube. Check if the charger is in good condition. (Use another good one to check) Make the battery cool for 30 minutes, and the temperature sensor switch will be on Battery has pasted its lifetime, should change Turn on the transmitter Change new batteries Set the same channel & group of flash & transmitter. Let the flash body cool, then restart the flash. Change a new battery or charge the battery. Turn on the power switch Transmitter isn t compatible with the camera, should choose the corresponding special transmitter for the right camera brand. 7 8