Manual / Operating Instructions

Transcription

1 Manual / Operating Instructions Camera EC-940-AFZ R. STAHL Camera Systems GmbH Adolf-Grimme-Allee 8 D Cologne Version Issue date:

2 Disclaimer Disclaimer Publisher and copyright holder: R. STAHL Camera Systems GmbH Adolf-Grimme-Allee 8 D Köln Registered place of business: Cologne Court of registration: District court Cologne, HRB VAT number: DE Telephone: +49 (0) Fax: office@stahl-camera.de Technical Support: support@stahl-camera.de All rights reserved. This document may not be reproduced in whole or in part except with the written consent of the publisher. The information in this document is subject to change without notice. Any warranty claims are limited to the right to demand amendments. Liability for any damage that might result from the contents of these instructions or all other documentation is limited to clear cases of premeditation. We reserve the right to change our products and their specifications at any time, provided it is in the interest of technical progress. The information in the current manual (online or on CD / DVD / USB stick) or in the operating instructions included with the equipment applies. Trademark The terms and names used in this document are registered trademarks and / or products of the companies in question. Copyright 2018 by R. STAHL Camera Systems GmbH. Subject to alterations. Page 2 of 40 R. STAHL Camera Systems GmbH / HM_OI_Camera_EC_940_en_V_01_00_04.docx /

3 Formatting conventions Formatting conventions The markings in these operating instructions refer to specific features that must be noted. In detail, these are: DANGER This sign alerts users to hazards that will result in death or serious injury if ignored. WARNING This sign alerts users to hazards that may result in death or serious injury if ignored. CAUTION This sign alerts users to hazards that may damage machinery or equipment or result in injury if ignored. CAUTION Information highlighted by this symbol indicates measures for the prevention of damage to machinery or equipment. NOTICE Information highlighted by this symbol indicates important information of which particular note should be taken. DOCUMENTATION Information highlighted by this symbol refers to a different chapter or section in this manual or other documentation or a web-page. Graphic Symbols Information highlighted by this symbol indicates important operating and maintenance (servicing) instructions in the literature accompanying the product. Information highlighted by this symbol indicates the presence of "dangerous voltage" within the product's enclosure, which may constitute a risk of an electric shock to persons. R. STAHL Camera Systems GmbH / HM_OI_Camera_EC_940_en_V_01_00_04.docx / Page 3 of 40

4 Formatting conventions Warning CAUTION These servicing instructions are for use by qualified service personnel only. To reduce the risk of electric shock do not perform any servicing other than that contained in the operating instructions. Please use the input power with just one camera and do not connect any other devices. The ITE is to be connected only to PoE networks without routing to the outside plant. Caution! The surface of the camera can heat up at ambient temperatures higher than 45 C! Caution at contact! Page 4 of 40 R. STAHL Camera Systems GmbH / HM_OI_Camera_EC_940_en_V_01_00_04.docx /

5 Contents Contents Description Page Disclaimer 2 Formatting conventions 3 Graphic Symbols 3 Warning 4 Contents 5 1 Preface 7 2 Scope of delivery 7 3 Camera Function 7 4 Recommended Specifications PC Specification NAS Specification 9 5 Technical data PoE++ Extender 12 6 Conformity to standards 12 7 Certificates ATEX IECEx 13 8 Marking 13 9 Type code Approval Product type Safety Advice Installation and operation Connecting conditions Warning notes Installation General information Special requirements Cable glands Earthing Mounting and dismounting General information Mechanical dimensions Camera EC-940-AFZ View "tube" without mounting plate Dimensions Main mounting plate EC-940-AFZ View Dimensions Mounting joint EC-940-AFZ View Dimensions EC-940-AFZ camera with optional wall bracket and sun protection (SR) 22 R. STAHL Camera Systems GmbH / HM_OI_Camera_EC_940_en_V_01_00_04.docx / Page 5 of 40

6 Contents View Dimensions Sun protection (SR) View Dimensions Optional accessories Wall bracket EC-94x-AFZ Ceiling bracket EC-94x-AFZ Corner bracket adaptor EC-94x-AFZ Pole mounting adaptor EC-94x-AFZ PoE++ Extender View Commissioning General information EC-940-AFZ camera connections EC-940-AFZ with copper interface View Connection overview EC-940-AFZ with FO interface View Connection overview Connection overview PoE++ variant Maintenance, overhaul and repair Overhaul Troubleshooting Disposal RoHS directive 2011/65/EU Terminals Declaration of EC conformity Release notes 39 Page 6 of 40 R. STAHL Camera Systems GmbH / HM_OI_Camera_EC_940_en_V_01_00_04.docx /

7 Preface 1 Preface This manual / these operating instructions contain all aspects relevant to explosion protection for the EC-940-AFZ cameras. They also contain information on the connection, installation and commissioning (etc.) of these devices. NOTICE All data relevant to explosion protection was copied to these operating instructions from the EC type examination certificate. For the correct operation of all associated components please note, in addition to these operating instructions, all other operating instructions enclosed in this delivery as well as the operating instructions of the additional equipment to be connected. DOCUMENTATION All certificates for the cameras are contained in the document entitled CE_EC-940-AFZ, which is not part of the delivery of the cameras. You can find this document online at or request a copy from R. STAHL Camera Systems GmbH. 2 Scope of delivery Camera EC-940-AFZ Main mounting plate EC-940-AFZ (mounted to camera EC-940-AFZ) Mounting joint EC-940-AFZ Cable glands (according to camera type) (enclosed) Sun protection (SR) Fall protection cable (connected to camera EC-940-AFZ) USB stick with software Manual / Operating Instructions Camera EC-940-AFZ Software Manual Camera EC-940-AFZ 3 Camera Function The EC-940-AFZ cameras are explosion-protected Ex de cameras for video monitoring hazardous areas such as petrochemical plants, gas storage and transport, drilling platforms, drilling rigs and drilling vessels, or silos. The cameras are certified according to ATEX directive 2014/34/EU for installation in hazardous areas zone 1, 2, 21 and 22. The EC-940-AFZ cameras are compact zoom cameras with a resolution of 2 megapixels (1920 x 1080), 32x optical zoom and 16x digital zoom and day / night function. Each version (see type code) of the EC-940-AFZ cameras has different options. Description of camera functions - Full HD video resolution - Multi-Streaming This network camera can display videos in different resolutions and qualities simultaneously using different CODECs. - Web Browser The web browser can be used to display the image in a local network environment. R. STAHL Camera Systems GmbH / HM_OI_Camera_EC_940_en_V_01_00_04.docx / Page 7 of 40

8 Recommended Specifications - Alarm If an event occurs, the camera sends the relevant videos to the address or the FTP server registered by the user, saves them in a Micro SD card or NAS, or sends the signal to the alarm output terminal. - Tampering Detection Detects tampering attempts on video monitoring. - Motion Detection Detects motion from the camera's video input. - Intelligent Video Analysis Analyses video to detect logical events of specified conditions from the camera's video input. - Face detection Detects faces from the camera's video input. - Auto Detection of Disconnected Network Detects network disconnection before triggering an event. - ONVIF Compliance This product supports ONVIF Profile-S. For more information, please refer to 4 Recommended Specifications 4.1 PC Specification - CPU: Intel Core 2 Duo 2.6 GHz or higher (for using 1920 x 1080 pixels, 30 fps) Intel Core i7 2.8 GHz or higher (for using 1920 x 1080 pixels, 60 fps) - Web plug-in is optimized to SSE 4.1 Instruction Set. - Resolution: 1280 X 1024 pixels or higher (32 bit colour) - RAM: 2 GB or higher - Supported operating systems: Windows XP / VISTA / 7 / 8 / 8.1, Mac OS X 10.7 / Supported browsers: Microsoft Internet Explorer (ver. 8 ~ 11) Mozilla Firefox (ver. 9 ~ 19) Google Chrome (ver. 15 ~ 32) Apple Safari (ver (Mac OS X 10.8, 10.7 only), 5.1.7) * Mac OS X only Windows 8 is supported only in the desktop mode. Neither a beta test version (unlike the version released on the company website) nor the developer version will be supported. It is recommended to connect to IPv6 in Windows 7. The camera does not support Internet Explorer Compatibility View settings. For Mac OS X only the Safari browser is supported. Page 8 of 40 R. STAHL Camera Systems GmbH / HM_OI_Camera_EC_940_en_V_01_00_04.docx /

9 Recommended Specifications - Video Memory: 256 MB or higher NOTICE If the driver of the video graphic adapter is not installed properly or is not the latest version, the video may not be played properly. For a multi-monitoring system involving at least two monitors, the playback performance can deteriorate depending on the system. We recommend you use Intel Core 2 Duo 2.93 GHz or higher in a multi-browser environment. 4.2 NAS Specification - Recommended capacity: 200 GB or higher - Simultaneous access: One unit of NAS can accept a maximum of sixteen camera accesses. For this camera we recommend you use a NAS with the following specifications Netgear NAS - maximum simultaneous access of 16 cameras Synologie NAS - maximum simultaneous access of 16 cameras NOTICE When you use netgear's NAS equipment, do not allocate the capacity for use. If you use NAS equipment for purposes other than video saving, the number of accessible cameras may be reduced. R. STAHL Camera Systems GmbH / HM_OI_Camera_EC_940_en_V_01_00_04.docx / Page 9 of 40

10 Technical data 5 Technical data Function / Equipment Camera type Camera version EC-940-AFZ-HDI-O4H EC-940-AFZ-HDI-O5H EC-940-AFZ-HDI-O6H AFZ = Auto Focus Zoom EC-940-AFZ-HDF-O4I EC-940-AFZ-HDF-O5I HD = Day / night vision camera, 32x optical zoom Video output IP copper IP FO Connection Power supply Connection box (Ex e) with terminals Connection box (Ex e) with terminals and FO connection Directly in the integrated Ex e connection box Rated operational voltage AC Version 4 only: 230 V Voltage range AC Version 4 only: V Frequency range Hz Rated operational voltage DC Version 5 only: 24 V Voltage range DC Version 5 only: V Power over Ethernet (PoE++) (only with R. STAHL PoE++ Extender) Additional: Power over Ethernet (PoE Class 3) Version 6 only Versions 4 and 5 only - (Operation without heater) Versions see type code (example: version 4 = EC-940-AFZ-HDI-O4H) Note Wattage (maximum) EC-940-AFZ-HDI-O4H 33.4 W Temperature range (operating temperature) Data cable length Ethernet copper Ethernet FO Enclosure Enclosure protection type EC-940-AFZ-HDI-O5H EC-940-AFZ-HDI-O6H EC-940-AFZ-HDF-O4I EC-940-AFZ-HDF-O5I Operation without heater: EC-940-AFZ-HDI-O4H EC-940-AFZ-HDI-O5H EC-940-AFZ-HDI-O4H EC-940-AFZ-HDI-O5H EC-940-AFZ-HDI-O6H EC-940-AFZ-HDF-O4I EC-940-AFZ-HDF-O5I 30.6 W 37.6 W 35.9 W 33.1 W -10 C to +65 C / [14 F to 149 F] -40 C to +65 C / [-40 F to 149 F] -55 C to +65 C / [-67 F to 149 F] -25 C to +55 C / [-13 F to 131 F] 100 m ( ft) max m (13, ft.) at 62.5 µm core cross section max m (16,404.2 ft.) at 50 µm core cross section and usage of 9721/ Stainless steel electropolished IP66 Dimensions 484 mm x 137 mm Mounting position any Weight ca kg Camera details Imaging device 1/2.8" 2.38MP CMOS Total number of pixels / effective pixels 1952 (H) x 1116 (V), 2.18M / 1944 (H) x 1104 (V), 2.14M Scanning system Progressive Min. illumination Colour: 0.3 Lux (1/30 sec., F1.6, 50 IRE), B/W : 0.03 Lux (1/30 sec., F1.6, 50 IRE) S / N ratio 50 db Focal length (zoom ratio) 4.44 ~ mm (optical 32x) Max. aperture ratio F1.6 (wide) / F4.4 (tele) Angular field of view H: 62.8 (wide) ~ 2.23 (tele) / V: (wide) ~ 1.26 (tele) Min. object distance 1.5 m (4.92 ft) Focus control Auto / Manual / One push Lens / mount type DC auto iris / Board-in type Camera title Off / On (displayed up to 45 characters) Day & night Auto (ICR) / Color / B/W / External / Schedule Backlight compensation Off / BLC Wide dynamic range 120 db Contrast enhancement SSDR (Samsung Super Dynamic Range) (off / on) Digital noise reduction SSNRIII (2D + 3D noise filter) (off / on) Digital image stabilization Off / On Defog Off / Auto / Manual Page 10 of 40 R. STAHL Camera Systems GmbH / HM_OI_Camera_EC_940_en_V_01_00_04.docx /

11 Technical data Motion detection Off / On (4ea 4 points polygonal zones) Privacy masking Off / On (32 zones with 2 points of rectangle) Gain control Off / Low / Middle / High White balance ATW / AWC / Manual / Indoor / Outdoor / Mercury Electronic shutter speed Minimum / Maximum / Anti flicker (2 ~ 1/12,000 sec) Digital zoom 16x Flip / mirror Off / On Intelligent video analytics Tampering, Virtual line, Enter / Exit, (Dis)Appear, Audio detection, Face detection Alarm triggers Motion detection, tampering, audio detection, face detection, video analytics, alarm input, network disconnection File upload via FTP and , notification via , local storage Alarm events (SD/SDHC/SDXC) or NAS recording at network disconnected & event (alarm triggers), external output Ethernet RJ-45 (10/100BASE-T) Video compression format H.264 (MPEG-4 part 10/AVC), MJPEG Resolution 1920 x 1080, 1280 x 1024, 1280 x 960, 1280 x 720, 1024 x 768, 800 x 600, 800 x 450, 720 x 576, 640 x 480, 640 x 360, 320 x 240, 320 x 180 H.264 : Max. 60fps at all resolutions MJPEG: 1920 x 1080, 1280 x 1024, 1280 x 960, 1280 x 720, 1024 x 768 : Max. Max. framerate 15fps 800 x 600, 800 x 450, 720 x 576, 640 x 480, 640 x 360, 320 x 240, 320 x 180 : Max. 30fps Smart codec Manual mode (Area-based : 5ea), face detection mode Video quality adjustment H.264: compression level, target bitrate level control, MJPEG : quality level control Bitrate control method H.264 : CBR or VBR, MJPEG : VBR Streaming capability Multiple streaming (Up to 10 profiles) IP IPv4, IPv6 TCP/IP, UDP/IP, RTP(UDP), RTP(TCP), RTCP, RTSP, NTP, HTTP, HTTPS, SSL, Protocol DHCP, PPPoE, FTP, SMTP, ICMP, IGMP, SNMPv1/v2c/v3(MIB-2), ARP, DNS, DDNS, QoS, PIM-SM, UPnP, Bonjour Security HTTPS (SSL) login authentication, digest login authentication IP address filtering, user access log, 802.1x authentication Streaming method Unicast / Multicast Max. user access 10 users at unicast mode Application programming interface ONVIF profile S, SUNAPI 2.0, SVNP 1.2 English, French, German, Spanish, Italian, Chinese, Korean, Russian, Japanese, Webpage language Swedish, Danish, Portuguese, Turkish, Polish, Czech, Rumanian, Serbian, Dutch, Croatian, Hungarian, Greek, Finnish, Norwegian Supported OS: Windows XP / VISTA / 7 / 8 / 8.1, MAC OS X 10.7 / 10.8 Supported Browser: Microsoft Internet Explorer (Ver. 8-11) Mozilla Firefox (Ver. 9 Web viewer ~ 19), Google Chrome (Ver. 15 ~ 32) Apple Safari (Ver (Mac OS X 10.8, 10.7 only), 5.1.7) * Mac OS X only Central management software SmartViewer, SSM, mobile viewer R. STAHL Camera Systems GmbH / HM_OI_Camera_EC_940_en_V_01_00_04.docx / Page 11 of 40

12 Conformity to standards 5.1 PoE++ Extender Function / Equipment Power supply PoE specification Ethernet interface Data cable Data cable length Connetions Ethernet Status LED s Operating temperature range Operation Storage temperature range Relative humidity Housing Dimensions (L x B x H) Weight PoE++ Extender via separate power supply IEEE 802.3af PoE, IEEE 802.3at PoE, PoE++ 10/100Base-T UTP 150 m ( ft) RJ-45 connector Power Standard Ethernet: Data, Link Extended Ethernet: Data, 10/100Base-T -20 C +75 C / [-4 F +167 F] -40 C +80 C / [-40 F +176 F] 0 to 90 %, without condensation Aluminium 106 mm x 40 mm x 29 mm / 4.2 in x 1.6 in x 1.15 in 0,127 kg / 0.28 lbs 6 Conformity to standards The EC-940-AFZ cameras comply with the following standards and directives Standard Directive 2014/34/EU Classification Initial certification EN : A1 : 2013 General requirements EN : 2014 Flameproof enclosure "d" EN : 2015 Increased safety "e" EN : 2015 Optical radiation "op is" EN : 2014 Protected by enclosures "t" (dust) Electromagnetic compatibility Directive 2014/30/EU EN : 2011 Interference resistance IEC : 2005 EN : 2011 Interference emission IEC : 2011 Low voltage directive Directive 2006/95/EC IEC : A11 : General requirements A1 : A12 : A13 : 2013 RoHS directive 2011/65/EU Technical documentation for the assessment of electrical and electronic products with EN : 2012 respect to the restriction of hazardous substances Page 12 of 40 R. STAHL Camera Systems GmbH / HM_OI_Camera_EC_940_en_V_01_00_04.docx /

13 Certificates 7 Certificates The EC-940-AFZ cameras are certified for installation in the following areas: Europe: according to ATEX directive for installation in zones 1, 2, 21 and 22 International / Australia: IECEx (International Electrotechnical Commision System for Certification to Standards for Electrical Equipment for Explosive Atmospheres) 7.1 ATEX The ATEX certificate is listed under the following certification number: Certificate number: PTB 16 ATEX 1019 X 7.2 IECEx The IECEx certificate is listed under the following certification number: Certificate number: PTB X 8 Marking Manufacturer Type code: CE classification: Testing authority and certificate number: Ex classification: R. STAHL Camera Systems GmbH EC-940-AFZ-* 0158 PTB 16 ATEX 1019 X IECEx PTB X EC-940-AFZ-HDI-O5H EC-940-AFZ-HDI-O4H ATEX II 2 G Ex db eb IIC T4 Ta = -55 C +80 C II 2 D Ex tb IIIC T135 C Ta = -55 C +80 C IECEx Ex db eb IIC T4 Ta = -55 C +80 C Ex classification: Ex tb IIIC T135 C Ta = -55 C +80 C EC-940-AFZ-HDF-O5I EC-940-AFZ-HDF-O4I ATEX II 2 G Ex db eb op is IIC T4 Ta = -55 C +80 C II 2 D Ex tb IIIC T135 C Ta = -55 C +80 C IECEx Ex db eb op is IIC T4 Ta = -55 C +80 C Ex classification: Ex tb IIIC T135 C Ta = -55 C +80 C EC-940-AFZ-HDI-O6H ATEX II 2 G Ex db eb IIC T4 Ta = -55 C +80 C II 2 D Ex tb IIIC T135 C Ta = -55 C +80 C IECEx Ex db eb IIC T4 Ta = -55 C +80 C Ex tb IIIC T135 C Ta = -55 C +80 C R. STAHL Camera Systems GmbH / HM_OI_Camera_EC_940_en_V_01_00_04.docx / Page 13 of 40

14 Type code 9 Type code 9.1 Approval EC-940-aaa-bbc-def-ggh Version (blank or for internal purposes) Version (blank or for internal purposes) Connection: H I Connection box (Ex e) with terminals Connection box (Ex e) with terminals and FO connection Power supply: V AC V DC 6 PoE++ (Power over Ethernet) with Extender Accessories: O no wiper, heater, sun protection (SR) X no wiper, no heater, sun protection (SR) Y no wiper, no heater, no sun protection (SR) Video output: A analogue video I IP copper interface F IP FO interface Camera version HD HD day / night vision camera (pre-installed), 32x optical zoom Camera type: AFZ Auto Focus Zoom camera 9.2 Product type Product type: Version EC-940-AFZ-HDI-O4H EC-940-AFZ-HDI-O5H EC-940-AFZ-HDI-O6H EC-940-AFZ-HDF-O4I EC-940-AFZ-HDF-O5I Description Full HD IP camera, 230 V AC, heater, sun protection (SR) Full HD IP camera, 24 V DC, heater, sun protection (SR) Full HD IP camera, PoE++ version, heater, sun protection (SR) Full HD IP camera, 230 V AC, heater, FO converter, sun protection (SR) Full HD IP camera, 24 V DC, heater, FO converter, sun protection (SR) NOTICE The operation of the IP FO camera types EC-940-AFZ-HDF-O4I and EC-940-AFZ-HDF-O5I requires an FO switch at the receiving end with explosion protection "op is"! The operation of the camera type EC-940-AFZ-HDF-O6H (PoE++ version) requires the R. STAHL PoE++ Extender at the receiving end! Page 14 of 40 R. STAHL Camera Systems GmbH / HM_OI_Camera_EC_940_en_V_01_00_04.docx /

15 Safety Advice 10 Safety Advice NOTICE This chapter is a summary of the key safety measures. The summary is supplementary to existing rules which staff also have to study. The safety of persons and equipment in hazardous areas depends on compliance with all relevant safety regulations. Thus, the installation and maintenance staff carry a particular responsibility, requiring precise knowledge of the applicable regulations and conditions. Requiring precise knowledge of the applicable regulations and conditions. CAUTION The notes listed below in section 10.1 must be heeded to avoid injury and damage to equipment! 10.1 Installation and operation Please note the following when installing and operating the device: The national regulations for installation and assembly apply (e.g. IEC/EN ). The EC-940-AFZ cameras may be installed in zones 1 or 2 and 21 or 22. The camera must not be opened while connected to power. The camera must not be connected whilst switched on. The camera must be switched off before it is disconnected from the cable / connected system. The camera's power supply or its main circuits must be safely grounded. Before switching on the EC-940-AFZ camera ensure that the mechanical and electrical connections of all components fit securely. National safety and accident prevention rules. Generally accepted technical rules. Safety instructions of this manual / these operating instructions. Any damage may compromise the explosion protection! Use the EC-940-AFZ cameras for their intended purpose only (see "Camera Function"). Incorrect or unauthorized use and non-compliance with the instructions in this manual / these operating instructions will void any warranty on our part. No changes may be made to the EC-940-AFZ camera or one of its components that compromise explosion protection! The camera may only be installed and operated in an undamaged, dry and clean condition! R. STAHL Camera Systems GmbH / HM_OI_Camera_EC_940_en_V_01_00_04.docx / Page 15 of 40

16 Safety Advice 10.2 Connecting conditions The Camera Enclosure of the type family EC-940-***-***-**K-*** (assembling completely in the type of protection "Flameproof enclosures") shall be connected with suitable cable glands or conduit systems that meet the requirements set forth in EN , sections 13.1 and 13.2, and for which a separate test certificate has been issued. If the Camera Enclosure is connected to conduit systems, the required sealing device shall be provided immediately at the enclosure. Openings that are not used shall be sealed in compliance with the specifications in EN , section If connection is made in the potentially explosive area, the connecting wire of the Camera Enclosure shall be connected in an enclosure that meets the requirements of an approved type of protection in accordance with IEC , section 1. The connecting wire of the Camera Enclosure shall be fixed and routed so that it will be adequately protected against mechanical damage. If the temperature at entry fittings exceeds 70 C, temperature-resistant connecting cables shall be used. The Camera Enclosure shall be included into the local equipotential bonding solution of the potentially explosive location Warning notes WARNING Do not open when live! Wait for 15 minutes after switching the camera off before opening it! Do not open, maintain or repair the camera in areas where there may be an explosive atmosphere! The camera must not be installed in locations where the labels may be exposed to an electrostatic charge greater than that caused by mechanical rubbing. * * Examples of processes where electrostatic charges occur that are greater than those caused by mechanical rubbing: The camera is in an area - where there may be dust agitation caused by pneumatics or gravity (camera installed on the floor of a dust silo) - closer than 1 m to a source of high voltage Page 16 of 40 R. STAHL Camera Systems GmbH / HM_OI_Camera_EC_940_en_V_01_00_04.docx /

17 Installation 11 Installation 11.1 General information NOTICE Electrical plants are subject to certain regulations concerning installation and operation (e.g. RL 1999/92/EG, RL 2014/34/EU and IEC/EN ). The users of electrical installations in hazardous environments must ensure that the equipment is kept in proper condition, is operated according to instructions and that maintenance and repairs are carried out. The details of used associated equipment must be observed (for example permitted cable diameter for used cable glands, tighten rules, cable clamping). Unused openings must be closed by a suitable blind plug. The connectors are designed to be readily connected or disconnected without load. The cameras are sealed with a stick-on label at the screw connections to the Ex d box. For safe transport a foam piece is inserted between the camera tube and the sun protection. This foam piece must be removed BEFORE commissioning the camera. According to IEC 60950, a suitable, easily accessible circuit breaker must be installed outside of the camera which can cut the power line Special requirements The camera may be installed and operated in any position. The camera must be securely installed! Use the mounting options provided by the camera bracket! If necessary, the camera must be secured with an additional steel chain (fall protection). Disconnect the camera from the mains prior to assembly, maintenance or repair. The camera enclosure is available with an Ex e connection box. The Ex e connection box contains mounting options for further associated equipment (e.g. cable glands, cable connections). This associated equipment must meet the related IEC requirements: for Ex e connection boxes this is IEC for Ex t connection boxes this is IEC R. STAHL Camera Systems GmbH / HM_OI_Camera_EC_940_en_V_01_00_04.docx / Page 17 of 40

18 Installation 11.3 Cable glands Standard cable glands / stopping plug * type Hummel and CMP Camera variant Number Variant Manufacturer Size Type 1 Cable gland CMP M25 x 1,5 25sC2K EC-940-AFZ-HDI-O4H 1 Enlargement CMP M20 to M and 1 Stopping plug Hummel M16 x 1,5 V-Ms-VMQ-Ex EC-940-AFZ-HDI-O5H 1 Stopping plug Hummel M20 x 1,5 V-Ms-VMQ-Ex 1 Cable gland Hummel M20 x 1,5 HSK-MZ-EMV-Ex EC-940-AFZ-HDI-O6H 1 Stopping plug Hummel M16 x 1,5 V-Ms-VMQ-Ex EC-940-AFZ-HDF-O4I and EC-940-AFZ-HDF-O5I 1 Stopping plug Hummel M25 x 1,5 V-Ms-VMQ-Ex 1 Cable gland Hummel M20 x 1,5 HSK-MZ-EMV-Ex 1 Cable gland Hummel M25 x 1,5 HSK-MZ-EMV-Ex 1 Stopping plug Hummel M16 x 1,5 V-Ms-VMQ-Ex NOTICE * It is allowed to use any other Ex certified cable gland, which fulfill the technical requirements. The cable glands are inclosed in the delivery, the stopping plugs are mounted at the camera tube. Page 18 of 40 R. STAHL Camera Systems GmbH / HM_OI_Camera_EC_940_en_V_01_00_04.docx /

19 Installation 11.4 Earthing The camera must be earthed with a core cross section of at least 4 mm² or in line with applicable standards. An external earth connection is provided. The Camera Enclosure shall be included into the local equipotential bonding solution of the potentially explosive location. Screw-in thread for equipotential bonding / earth connection M5x5 mm Bolt for equipotential bonding / earth connection at optional wall bracket M5x5 mm R. STAHL Camera Systems GmbH / HM_OI_Camera_EC_940_en_V_01_00_04.docx / Page 19 of 40

20 Mounting and dismounting 12 Mounting and dismounting 12.1 General information NOTICE 12.2 Mechanical dimensions Camera EC-940-AFZ View "tube" without mounting plate Assembly and disassembly are subject to general technical rules. Additional, specific safety regulations apply to electronic and pneumatic installations. In Germany, for example, these include the BG regulations (Government Safety Association) and the BetrSichVer (Betriebsicherheitsverodnung - Occupational Health and Safety). front back NOTICE Cable glands are included in delivery Dimensions A x B: 484 mm x 137 mm Page 20 of 40 R. STAHL Camera Systems GmbH / HM_OI_Camera_EC_940_en_V_01_00_04.docx /

21 Mounting and dismounting Main mounting plate EC-940-AFZ View Dimensions Mounting joint EC-940-AFZ View A = 175 mm B = 206 mm C = 92 mm D = Ø 8 mm for fall protection cable E = 4x M8 nut F = 6x M4 thread Dimensions A = 80 mm B = 75 mm C = 70 mm R. STAHL Camera Systems GmbH / HM_OI_Camera_EC_940_en_V_01_00_04.docx / Page 21 of 40

22 Mounting and dismounting EC-940-AFZ camera with optional wall bracket and sun protection (SR) View front back Dimensions A = 551 mm B = 547 mm C = 621 mm D = 355 mm E = 5 mm F = M5x10 mm bolt G = 177 mm H = 200 mm I = 135 mm J = 135 mm K = 80 mm L = Ø 11 mm Page 22 of 40 R. STAHL Camera Systems GmbH / HM_OI_Camera_EC_940_en_V_01_00_04.docx /

23 Mounting and dismounting Tilting angle M = max.: 90 adjustable Panning angle N = max.: 100 adjustable R. STAHL Camera Systems GmbH / HM_OI_Camera_EC_940_en_V_01_00_04.docx / Page 23 of 40

24 Mounting and dismounting Panning angle 0 = fixed to 90, right or left: can be fixed to 90 Page 24 of 40 R. STAHL Camera Systems GmbH / HM_OI_Camera_EC_940_en_V_01_00_04.docx /

25 Mounting and dismounting Sun protection (SR) View Dimensions A = 80 mm B = 75 mm C = 70 mm Optional accessories Wall bracket EC-94x-AFZ View Dimensions A = 330 mm B = 135 mm C = Ø 60.3 mm D = 5 mm E = M5x10 mm bolt F = 3x M8x21 mm bolt G = 200 mm H = 135 mm I = 135 mm J = 80 mm K = Ø 11 mm R. STAHL Camera Systems GmbH / HM_OI_Camera_EC_940_en_V_01_00_04.docx / Page 25 of 40

26 Mounting and dismounting Ceiling bracket EC-94x-AFZ View Dimensions A = mm B = mm C = 5 mm D = 3x M8x21 mm bolt E = M5x10 mm bolt F = mm G = 135 mm H = 80 mm I = 200 mm J = 135 mm K = Ø 11 mm Page 26 of 40 R. STAHL Camera Systems GmbH / HM_OI_Camera_EC_940_en_V_01_00_04.docx /

27 Mounting and dismounting Corner bracket adaptor EC-94x-AFZ - requires wall bracket View Dimensions A = 355 mm B = 211 mm C = 71 mm D = 150 mm E = 50 mm F = 110 mm G = Ø 11 mm H = 4x M8 nut Pole mounting adaptor EC-94x-AFZ - requires wall bracket - for pole diameter mm View front side top R. STAHL Camera Systems GmbH / HM_OI_Camera_EC_940_en_V_01_00_04.docx / Page 27 of 40

28 Mounting and dismounting Dimensions A = 214 mm B = 194 mm C = 56 mm D = M8 thread PoE++ Extender View Dimensions A = 133 mm B = 106 mm C = mm D = 40 mm E = 29 mm Page 28 of 40 R. STAHL Camera Systems GmbH / HM_OI_Camera_EC_940_en_V_01_00_04.docx /

29 Commissioning 13 Commissioning 13.1 General information NOTICE When operating the EC-940-AFZ camera, particular care shall be taken that: the EC-940-AFZ camera has been properly installed according to instructions, the camera is undamaged, all screws are tightened fast. R. STAHL Camera Systems GmbH / HM_OI_Camera_EC_940_en_V_01_00_04.docx / Page 29 of 40

30 Commissioning 13.2 EC-940-AFZ camera connections EC-940-AFZ with copper interface View Connection overview Terminal Terminal labelling Meaning Typical colour Connection Camera power supply 9 PE Earth Green / yellow 10 - Power supply 0 V Black DC 11 + Power supply +24 V Red or 9 PE Earth Green / yellow 10 L Power supply phase Black AC 11 N Power supply neutral Blue or NC Not used (connected to earth) Page 30 of 40 R. STAHL Camera Systems GmbH / HM_OI_Camera_EC_940_en_V_01_00_04.docx / PoE++ (Power over Ethernet) (with R. STAHL PoE++ Extender only) Ethernet connection Terminal (labelling) Assignment Typical colour Connection 1000Base-TX 100Base-TX Ethernet 1 D1+ TX+ Orange / white or 2 D1- TX- Orange PoE 3 D2+ RX+ Green / white (Class 3, 4 D2- RX- Green without heater) 5 D3+ Blue / white (at PoE version 6 D3- Blue usage of all 8 wires 7 D4+ Brown / white is necessary) 8 D4- Brown

31 Commissioning EC-940-AFZ with FO interface View Connection overview Terminal Terminal labelling Meaning Typical colour Connection Camera power supply 1 PE Earth Green / yellow 2 - Power supply 0 V Black DC 3 + Power supply +24 V Red or 1 PE Earth Green / yellow 2 L Power supply phase Black AC 3 N Power supply neutral Blue FO connection SC Duplex connector FO interface NOTICE For the fiber optic connection use a bend improved fiber optical cable. R. STAHL Camera Systems GmbH / HM_OI_Camera_EC_940_en_V_01_00_04.docx / Page 31 of 40

32 Maintenance, overhaul and repair Connection overview PoE++ variant Safe area Ethernet connection PoE++ Extender PC EC-940-AFZ-HDI-O6H 14 Maintenance, overhaul and repair NOTICE Associated equipment is subject to maintenance, service and testing according to guidelines 1999/92/EC, IEC , -17, -19 and BetrSichVer (Betriebssicherheitsverordnung - Occupational Safety and Health)! The devices are maintenance-free across their entire lifespan. The following must be checked during maintenance work: a. Display damage b. Seal wear c. Housing damage d. All screws are tightened fast e. All cables and lines are properly connected and undamaged Any repairs must always be carried out by the manufacturer! Gaskets that are fixed in grooves need to be checked at each opening and shall be replaced only by original spare parts from the manufacturer! 14.1 Overhaul In accordance with IEC/EN and IEC/EN , operators of electric plants in hazardous areas are obliged to have them serviced by qualified electricians. 15 Troubleshooting NOTICE Devices operated in hazardous areas must not be modified. Repairs may only be carried out by qualified, authorized staff specially trained for this purpose. Overhauling may only be carried out by specially trained staff who are familiar with all basic conditions of the applicable user regulations and if requested have been authorized by the manufacturer. Page 32 of 40 R. STAHL Camera Systems GmbH / HM_OI_Camera_EC_940_en_V_01_00_04.docx /

33 Disposal 16 Disposal Disposal of old electric and electronic devices, packaging and used parts is subject to regulations valid in whichever country the device has been installed. For countries under the jurisdiction of the EU the corresponding WEEE directive applies. The HMI devices are classified according to the table below: old new Directive WEEE I Directive 2002/96/EC WEEE II Directive 2012/19/EU Valid until from SG5 Category Monitoring and control devices Small equipment 50 cm We shall take back our devices according to our General Terms and Conditions RoHS directive 2011/65/EU The revision of RoHS directive 2001/95/EC and the resulting revised version 2011/65/EU extends its scope to all electric and electronic products. The cameras are conform with the requirements from RoHS directive 2011/65/EC, dated R. STAHL Camera Systems GmbH / HM_OI_Camera_EC_940_en_V_01_00_04.docx / Page 33 of 40

34 Terminals 17 Terminals NOTICE Type UT terminals by Phoenix Contact are installed inside the camera's connection box. Please note the following! Page 34 of 40 R. STAHL Camera Systems GmbH / HM_OI_Camera_EC_940_en_V_01_00_04.docx /

35 Terminals R. STAHL Camera Systems GmbH / HM_OI_Camera_EC_940_en_V_01_00_04.docx / Page 35 of 40

36 Terminals Page 36 of 40 R. STAHL Camera Systems GmbH / HM_OI_Camera_EC_940_en_V_01_00_04.docx /

37 Terminals R. STAHL Camera Systems GmbH / HM_OI_Camera_EC_940_en_V_01_00_04.docx / Page 37 of 40

38 Declaration of EC conformity 18 Declaration of EC conformity Page 38 of 40 R. STAHL Camera Systems GmbH / HM_OI_Camera_EC_940_en_V_01_00_04.docx /

39 Release notes 19 Release notes The chapter entitled "Release Notes" contains all the changes made in every version of the manual / the operating instructions. Version Original version of the manual / the operating instructions Version Changes according to development Version Addition of section "Cable glands" Addition of drawing "Ceiling bracket" Addition of drawing "PoE++ Extender" Addition of "Connection overwiev" PoE++ Extender Addition of "Technical data" PoE++ Extender Addition of certification numbers ATEX, IECEx Version Correction terminal labelling in section " EC-940-AFZ camera connections" Changing of technical data Deleting of "contact resistance 1 MΩ" in section "Connecting conditions" and "Earthing" Changing cable lenght PoE version Changing "Conformity to standards" Changing data into RL 2014/34/EU Changing section "Instandhaltung, Wartung und Reparatur", Aufnahme von "Reparatur nur durch Hersteller" Changing section "Maintenance, overhaul and repair", deleting of sentence with "flameproof joints" Addition of "eb" in Ex marking at camera version EC-940-AFZ-HDI-O6H Addition of sentence with "easily accessible circuit breaker" in section "Installation General" Adaption of section "RoHS directive 2011/65/EC" Addition of warning lable "hot surface" in section "Warnings" Version Correction typicall coloure at terminal labelling Adaption of section "Disposal" according to the current WEEE directive Formal changes R. STAHL Camera Systems GmbH / HM_OI_Camera_EC_940_en_V_01_00_04.docx / Page 39 of 40

40 R. STAHL Camera Systems GmbH Adolf-Grimme-Allee 8 D Cologne Phone: (switchboard) +49 (0) Fax: (switchboard) office@stahl-hmi.de (hotline) support@stahl-hmi.de