POP COLOR SQUARE 2x2 LED

Transcription

1 PROJECT: TYPE: NOTES: Drop 1" lens Drop 2" lens See page 4 for more color options Flush lens Drop 3" lens Drop 4" lens DESCRIPTION POP Color features a painted housing with a uniformly luminous diffuser that sits flush or drops up to 4" below. The diffuser and light engine form a fully enclosed unit secured by a twist-and-lock mechanism for easy maintenance with no exposed hardware. POP Color delivers up to 110 and is available in nine standard housing colors. ORDER GUIDE up to 110 lm/w performance PCSQPD 22 ULO LED LUMINAIRE ID SIZE OPTICS DROP LENS LIGHT SOURCE CRI LUMEN PACKAGES PCSQPD - pop color square 22-2'X2' ULO - Uniform FH - flush LED - high performance LED 80-80CRI min. low output 2500lm pendant direct Lambertian Optic 1D - 1" drop 2D - 2" drop 90-90CRI medium output 3500lm max. high output 4500lm 3D - 3" drop 4D - 4" drop #### - other required lm 5SWAC36 COLOR TEMP. VOLTAGE DRIVER ELECTRICAL MOUNTING FINISH k k k k V V UNV - 120V-277V V D1-1% dimming 0-10V DA - Dali 1-1 circuit EM - emergency light circuit NL - night light circuit +EB - emergency battery pack +GTD### - generator transfer device, 120V or 277V 5SWAC36 - power 5" square white canopy (36" air craft cable) For all other options refer to our Pendant Mounting Guide W - matte white AL - aluminum BK - black RAL Yellow RAL Orange RAL Red RAL Magenta RAL Blue RAL Green CF# - custom finish specify RAL# See page 3 for ordering code detailed information OPTIONS CROSS SECTION FU - fuse CU - custom PCSQPD + FH - pop color square pendant with flush lens File Name: POPCOLOR22-SQUARE-PENDANT-SPEC Page: 1 / 5

2 POP COLOR FH - FLUSH POP COLOR 3D - 3" DROP 5" 7 13/16" POP COLOR 1D - 1" DROP POP COLOR 4D - 4" DROP 5 13/16" 2 1/2" POP COLOR 2D - 2" DROP 5" 8 13/16" 6 13/16" 2 1/2" File Name: POPCOLOR22-SQUARE-PENDANT-SPEC Page: 2 / 5

3 OPTICS UNIFORM EFFICIENCY LAMBERTIAN OPTIC (ULO) - made of formed impact modified white PMMA, the optic provides an even light distribution with up to 88% transmission. Its unique enclosed shell design protects LEDs against Electrostatic Discharge and dust while its back surface project a soft glow on the mounting surface. DROP LENS Pop square 22 pendant is available in 5 lens configurations. ELECTRICAL Factory-set, adjustable output current LED driver with universal ( VAC) input. Dimmable from 100% to 1% with 0-10V dimming control. Rated life (90% survivorship) of 50,000 hours at 50ºC max. ambient (and 70ºC max. case) temperature. At maximum driver load: Efficiency>84%, PF>0.9, THD<20%. Other specifiable options include DALI protocol drivers. All of our standard 0-10V drivers are NEMA 410 compliant. PCSQPD + FH - flush lens 5 13/16" 1 1/16" PCSQPD + 1D - 1" drop lens EMERGENCY Factory installed long life high temperature recyclable Ni-Cad battery pack with test switch and charge indicator, minimum of 90 minutes operation, up to 1300 lumens (25ºC) emergency lighting output. Recharge time of 24 hours. 6 13/16" 2 1/16" PCSQPD + 2D - 2" drop lens 7 13/16" 3 1/16" PCSQPD + 3D - 3" drop lens MOUNTING OPTIONS Fixtures are pendant-mounted, using aircraft cables. Unless otherwise specified, LumenWerx provides the following hardware: For cable-mounted fixtures - 5SWAC36, 5" square white canopy with a 36" cable. For all other options, see our website for a detailed Pendant Mounting Guide 8 13/16" 4 1/16" Power PCSQPD + 4D - 4" drop lens LIGHT SOURCE - LED Custom array of mid-flux LED s are mounted directly to the housing for optimal thermal performance. Available in 3000K, 3500K, 4000K and 5000k with a minimum 80 CRI and an option for 90 CRI with elevated R9 value. Color consistency maintained to within 3 SDCM. LEDs operated at reduced drive current to optimize efficacy and lumen maintenance. All LEDs have been tested in accordance with IESNA LM and the results have shown L80 lumen maintenance greater than 60,000 hours. Absolute product photometry is measured and presented in accordance with IESNA LM-79, unless otherwise indicated. AT 4000K low output 4000K medium output 4000K high output 4000K File Name: POPCOLOR22-SQUARE-PENDANT-SPEC Page: 3 / 5

4 FINISH Interior - 95% reflective, matte white powder coating Exterior - Side trim is offered in a range of vibrant color powder coating. W - matte white AL - aluminum BK - black RAL Yellow RAL Orange RAL Red RAL Magenta RAL Blue RAL Green CONSTRUCTION Housing - Welded aluminum extrusion.125in thick, wide variety of colored powder coating Diffuser - Uniform lambertian optic, precisely formed impact modified acrylic, completely enclosed WEIGHT SQ 22 Flush, 1D, 2D lbs kg SQ 22 3D, 4D lbs kg CERTIFICATIONS ETL - Rated for Indoor Dry/Damp locations. Conforms to UL Standard 1598 and certified to CAN/CSA Standard C22.2 No WARRANTY LumenWerx provides a five-year limited warranty of electrical and mechanical performance of the luminaires, including the LED boards, drivers, and auxiliary electronics. LumenWerx will repair or replace defective luminaires or components at our discretion, provided they have been installed and operated in accordance with our specifications. Other limitations apply, please refer to the full warranty on our website. File Name: POPCOLOR22-SQUARE-PENDANT-SPEC Page: 4 / 5

5 2500 LUMEN AT 80CRI - LOW OUTPUT low output 3000K low output 3500K low output 4000K low output 5000K LUMEN AT 80CRI - MEDIUM OUTPUT medium output 3000K medium output 3500K medium output 4000K medium output 5000K LUMEN AT 80CRI - HIGH OUTPUT high output 3000K high output 3500K high output 4000K high output 5000K File Name: POPCOLOR22-SQUARE-PENDANT-SPEC Page: 5 / 5