LIGHTPLANE 3 ROUND RLP3
|
|
|
- Lynn Lewis
- 6 years ago
- Views:
Transcription
1 LIGHTPLANE 3 ROUND RLP3 Find additional images and information at alwusa.com/rlp3
2 1. BASE MODEL RLP3S* 3" suspended RLP3SM " wall, stem mount with 6" arms and JBOX-4 canopy RLP3SM " wall, stem mount with 6" arms and JBOX-2 canopy RLP3SM " wall, stem mount with 12" arms and JBOX-4 canopy RLP3SM " wall, stem mount with 12" arms and JBOX-2 canopy RLP3SM " wall, stem mount with 18" arms and JBOX-4 canopy RLP3SM " wall, stem mount with 18" arms and JBOX-2 canopy RLP3SM ,3 3" wall, stem mount with 24" arms and JBOX-4 canopy RLP3SM ,3 3" wall, stem mount with 24" arms and JBOX-2 canopy 1 4" JBOX by others 2 2" JBOX included 3 Tie-backs standard for 24"arms Page 2 of 6 Type: 2. RUN LENGTH/ SIZE Individual (2, 3, 4, 5', 6, 7 or 8 ) Continuous row or Configuration 1 (enter total linear length, ex: 20 ) All lengths are nominal and may vary based on lamping and other specfication selections. Consult factory when exact lengths are required. 3. LAMPING DIRECT LED 4 LOW 5 MED HI 5 TUNE 6 DECOR 5 RGB None. Select when specifying only Indirect Lamping Pair lamping with CCT (where applicable), ex: MED/2700K Low-output, high-performance LED 641 delivered lm/ft, 7.3 W/lf, 88 lm/w Medium-output, high performance LED 854 delivered lm/ft, 9.7 W/lf, 88 lm/w High-output, high-performance LED 1068 delivered lm/ft, 12.1 W/lf, 88 lm/w Tunable white LED, 2700K-5700K 712 delivered lumens, 8.1 W/lf, 88 lm/w Decorative constant voltage LED, 285 delivered lm/ft, 4.4 W/lf, 65 lm/w 3000K 3500K 4000K Color-changing RGB LED, 5 W/lf 4 LED board options may be limited and/or subsituted to accomodate requests for exact, non-standard overall run lengths (ex: 3' 9"). Consult factory. 5 Performance calculations are extrapolated estimates based on the actual IES test results of MED option at 3500K with an HT lens 6 Performance calculations are extrapolated MAXIMUM estimates for mid-range CCTs based on the actual IES test results of MED option at 3500K with an HT lens. Cooler and warmer CCT settings will provide lower delivered lumens, lower lm/w and higher W/lf. *Lightplane Round 3 is DesignLights Constortium Qualified Product when configured as: RLP3S-XX-MED-0/10v/10%-HT-LOW-0/10v/10%-3500K-CL-AL-120 Verify configuration by searching for "Architectural Lighting Works" at designlights.org/qpl
3 4. DRIVER DIRECT LED 0/10V/ None. Select when specifying only Indirect Lamping 0-10V dimming (Pair driver with dimming % below, ex: 0/10V/10% 10% Standard dimming to 10% 1% Dimming to 1% 0% Premium dimming to 0% DALI DALI dimming to 0% DMX DMX dimming to 0% HILUME/A3 Lutron Hi-Lume A L3D EcoSystem or three-wire control, dimming to 1% Page 3 of 6 5. LENS DIRECT EXT HT None. Select when specifying only Indirect Lamping Extra diffuse High transmission, clear lens with frosted film 6. LAMPING INDIRECT LED 7 LOW 8 MED HI 8 TUNE 8 DECOR 8 RGB None. Select when specifying only Direct Lamping Pair lamping with CCT (where applicable), ex: MED/2700K Low-output, high-performance LED 678 delivered lm/ft, 7.2 W/lf, 94 lm/w Medium-output, high performance LED 904 delivered lm/ft, 9.6 W/lf, 94 lm/w High-output, high-performance LED 1130 delivered lm/ft, 12.0 W/lf, 94 lm/w Tunable white LED, 2700K-5700K 753 delivered lumens, 8.0 W/lf, 94 lm/w Decorative constant voltage LED, 301 delivered lm/ft, 4.4 W/lf, 68 lm/w 3000K 3500K 4000K Color-changing RGB LED, 5 W/lf 7 LED board options may be limited and/or subsituted to accomodate requests for exact, non-standard overall run lengths (ex: 3' 9"). Consult factory. 8 Performance calculations are extrapolated estimates based on the actual IES test results of MED option at 3500K with an HT lens 9 Performance calculations are extrapolated MAXIMUM estimates for mid-range CCTs based on the actual IES test results of MED option at 3500K with an HT lens. Cooler and warmer CCT settings will provide lower delivered lumens, lower lm/w and higher W/lf. 7. DRIVER INDIRECT LED 0/10V/ None. Select when specifying only Direct Lamping 0-10V dimming (Pair driver with dimming % below, ex: 0/10V/10% 10% Standard dimming to 10% 1% Dimming to 1% 0% Premium dimming to 0% DALI DALI dimming to 0% DMX DMX dimming to 0% HILUME/A3 Lutron Hi-Lume A L3D EcoSystem or three-wire control, dimming to 1%
4 8. LENS INDIRECT CL 10 EXT HT None. Select when specifying only Direct Lamping. Clear lens, highest transmission value (indirect only) Extra Diffuse Lens High transmission, clear lens with frosted film Page 4 of 6 10 Lens pixelation will be visible; may not be suitable for applications where indirect portion may be seen from above 9. FINISH AL BK WH RAL/ Standard, natural Ultimatte aluminum Black powdercoat White powdercoat Specify RAL powdercoat code (ex: #RAL/3003) 10. VOLTAGE volt volt UNV Universal voltage volt 11 Driver/ballast options may be limited with 347 voltage. Consult factory. 11. ADDITIONAL OPTIONS COMBO EMC/ 12 EMB/ 12,14 OS/ 13 PH 13 MC/ SB None Combination 4.5" canopies at feed locations with both power feed and suspension mounting hardware Emergency circuit (indicate total quantity, ex: EMC/4) Emergency battery pack (indicate total quantity, ex: EMB/4) Remote Occupancy sensor (indicate total quantity, ex: OS/4) Remote Photocell/daylight sensor (indicate total quantity, ex: PH/4) Mitered corners (indicate total quantity, ex: MC/4 for a rectangle) Seismic bracing 12,14 Consult factory for available options. EMB must be remoted when direct lighting is specified. 13 Limitations exist depending on size and specification. Consult factory for options and details LED LAMP PAIRING OPTIONS LOW MED HI LOW MED HI Limitations exist due to heat. Please follow above guidelines when specifying. Direct Indirect
5 DIMENSIONS Page 5 of 6 Indirect Direct Direct/Indirect 3" 3" 3" RLP3S SUSPENDED RLP3S SUSPENDED RLP3S SUSPENDED Stem Mount 3" Q The field-adjustable light channel rotates up to 330 RLP3SM STEM-MOUNT
6 HOUSING 100% recyclable, extruded architectural grade T6061 aluminum with.08" minimum wall thickness. ELECTRICAL Fluorescent ballasts are <10% THD Class P. Programmed-start standard. LED drivers are Class 2. L80 >50,000 hours. 80+ CRI. ETL listed for damp location with lens. LINEAR LENS OPTIONS Page 6 of 6 Extruded, twin-layered, high-impact acrylic. EXT is white and extra diffuse with minimal-to-no source visibility. HT is high transmission and clear with a frost film with minimal-to-no-source visibility. CL is clear with the most light output, but has source visibility. EMERGENCY Luminaires can be wired for emergency circuit and/or emergency battery backup. Consult factory for details. SUSPENSION HARDWARE EXT and HT Lens CEILING HARDWARE (1) 4.5" canopy per power feed location, (1) bullet mount, (1) 8' aircraft cable and (1) 2" canopy (for use with T-bar mounting) per suspension point COMBO CANOPY Choose option COMBO to specfiy 4.5" canopies at feed locations with power feed and aircraft cable suspension mounting FINISH Standard finish is "Ultimatte" aluminum a smooth, clean and durable finish achieved from a deep-etch and two-step clear anodizing process. White, black and color RAL powdercoat options also available. OPTIONS Eye Bolt (By Others) Gripper w/hook 2-Cable Clamp Aircraft Cable SEISMIC BRACING Add-on hardward includes cable gripper with hook, 2-cable clamp and specified length of aircraft cable per suspension point ALUMINUM AL BLACK BK WHITE WH COLOR RAL
HBEAM 2 SPECIFICATIONS. QuickShip. HB2 Suspended, Wall. alwusa.com/hb2. Eligible. Find additional images and information at
QS QuickShip Eligible When ordered with ALL "QS" options HBEAM 2 HB2 Find additional images and information at alwusa.com/hb2 1. BASE MODEL HB2S QS 2" suspended, direct/indirect HB2W 1 QS 2" wall-mount,
LIGHTPLANE 3.5 WET LOCATION LP3.5WL Suspended, Wall, Surface LED
LIGHTPLANE 3.5 WET LOCATION LP3.5WL Suspended, Wall, Surface LED Find additional images and information at alwusa.com/lp35wl 1. BASE MODEL LP3.5SDWL 3-1/2 suspended stem-mount direct, wet location LP3.5WIWL
LIGHTPLANE 3.5 WET LOCATION LP3.5RWL Recessed LED
LIGHTPLANE 3.5 WET LOCATION LP3.5RWL Recessed LED Find additional images and information at alwusa.com/lp35rwl 1. BASE MODEL LP3.5RWL 1 3-1/2 recessed direct, wet location 1 Requires an already finished
LIGHTPLANE LP1 SUSPENDED, WALL, SURFACE. STANDARD SIZES 1" Aperture Configurable in linear shapes and straight run sections
LIGHTPLNE LP SUSPENDED, WLL, SURFCE STNDRD SIZES " perture Configurable in linear shapes and straight run sections LMPING LED - Direct or Indirect - 80 CRI - 3000K/3500K/4000K Output Options: LOW/MED/HI/DECOR
LIGHTPLANE 5R LP5R RECESSED. STANDARD SIZES 5" Aperture Configurable in linear shapes and straight run sections
LIGHTPLE 5R LP5R STDRD SIZES perture Configurable in linear shapes and straight run sections LMPIG LED - /90 CRI - 3000K// Output Options: LOW/MED/HI/DECOR/Tunable White/RG/RG+W Dimming down to 0% ccent
verve lens features dimensional data performance
lens verve features Suspended linear direct/indirect fluorescent with frosted acrylic, round patterned or squared patterned diffuser. One-piece steel housing with " die-cast end caps. Optional DR optics
POP CORE ROUND 36 LED
PROJECT: TYPE: NOTES: Shown with 3.5" optics Shown with 5" optics DESCRIPTION POP Core features a simple, uniformly luminous diffuser and delivers up to 120. The diffuser and light engine form a fully
Housing. Mounting. Warranty. Listing
8 and 10-inch aperture high lumen cylinder with lumen output 4590 11000lm. Quantity Project Type Note Electrical System - 4590lm (45W) 9340lm (85W) 10700lm (110W) - Power Input: Universal (120-277V) -
HLS House Lighting System
PROJECT: TYPE: HLS House Lighting System (metric) APPLICATION The House Lighting System (HLS) is designed to illuminate spaces requiring several lighting scenarios, such as theater or auditorium venues.
Applications: Wall wash and retail stores
2" Feed-Through Power Stem 2.8" Square Canopy 4.6" Round Canopy 4.6" Square Canopy Description: Kurve Display Sign features a lambertian white diffuser that provides uniform light without hotspots. At
POP COLOR SQUARE 2x2 LED
PROJECT: TYPE: NOTES: Drop 1" lens Drop 2" lens See page 4 for more color options Flush lens Drop 3" lens Drop 4" lens DESCRIPTION POP Color features a painted housing with a uniformly luminous diffuser
Regolo Perimeter System Reveal the Texture
Regolo Perimeter System Reveal the Texture ed Technology Nulite s Regolo Perimeter System is modular in design. The slender profile is ideal for highlighting textured walls in corridors, offices, lobbies
POP SQUARE 22 LED RECESSED
PROJECT: TYPE: NOTES: Drop 1" lens Drop 2" lens Flush lens Drop 3" lens Drop 4" lens DESCRIPTION POP Recessed features a uniformly luminous diffuser that sits flush with the ceiling or drops up to 4" below.
High-tech LED lighting system for interior architecture
Description Fun with magnets and light. Simultaneously graphic and subtle, the Running Magnet is flexible, precise, and as creative as you. It is track lighting redesigned and elegantly refined. Light
CIRRUS CEILING S1 - SQUARE 1 WITH REMOTE POWER
0.9" (2.3cm) CIRRUS CEILING S1 SQUARE (ACTUAL SIZE) 0.9" (2.3cm) CIRRUS CEILING S1 SQUARE LENS (ACTUAL SIZE) DESCRIPTION Cirrus Ceiling S1 is a linear LED fixture that offers direct light in a clean, contemporary
KEY: culus Listed. DLC Listed. DLC Premium Listed. FCC Certified. RoHS Compliant. 0-10v Dimming. DALI Protocol Compatible.
KEY: culus Listed DLC Listed DLC Premium Listed FCC Certified RoHS Compliant 0-10v Dimming DALI Protocol Compatible 7-year Warranty Cosmic Lighting Corp. www.cosmiclighting.com 2017 Cosmic Lighting Corp.
TOGO 24 PENDANT DIRECT/INDIRECT
DESCRIPTION Togo provides generous ambient illumination from a minimal and elegant ring form. Nestled in a crisp 4" high opaque band, the seamless, annular diffuser glows inwardly. The diffuser s soft
Housing. Mounting. Warranty. Listing
10-inch aperture high lumen 10 signum with lumen output 6760 10700lm. Quantity Project Type Note Electrical System - 9340lm (85W) 10700lm (110W) - Power Input: Universal (120-277V) - Operating Temperature:
ADVANCED HIGH CEILING 6 Cylinder Slim Series
DRIVER Specification *For tunable white option, please refer to Tunable White Version (ColorFlip ) spec sheet. Quantity Project Note Type 6-inch aperture cylinder with aesthetic design and minimal visual
High-tech LED lighting system for interior architecture
Description Fun with magnets and light. Simultaneously graphic and subtle, the Running Magnet is flexible, precise, and as creative as you. It is track lighting redesigned and elegantly refined. Light
SLIM ARCHITECTURAL STRIP SAS L
PROJCT INFORMATION Project Name Catalog # Type Date LIM ARCHITCTURAL TRIP A 15-14L hown with ilver Finish and quare Acrylic Lens APPLICATION Office paces Conference Rooms Commercial Facilities Retail paces
ADVANCED HIGH CEILING 6 Cylinder Slim Series
DRIVER Specification Quantity Project Note Type 6-inch aperture cylinder with aesthetic design and minimal visual impact suited for remodel or new construction. IP6, outdoor, and natatorium rated. IP6
High Bay Lighting. (ABV2-Series)
Albeo LED Luminaire High Bay Lighting (ABV2-Series) Product Features Expanding on the award-winning ABV-Series, the Albeo ABV2 LED luminaire is an exceptional mixture of value and performance. With improved
Atria 6 Series - Standard
6 06 6-inch aperture high lumen cylinder with lumen output 3470 950lm. Additional features include outdoor/natatorium rating, and ColorFlip tunable white. - Outdoor/Natatorium Rating (Please refer to Outdoor/Natatorium
Metalux. Round Lens. Square Lens. Round Lens. Square Lens
DESCRIPTION The SNLED series is a high output, DLC premium compliant LED strip light. It is available in CCT from 3000K to 5000K as well as 80 CRI or 90 CRI. Driver options are compatible with 10% or 1%
K K K K. 1 - Canopy Style 2 - Canopy Colour Square. 5 - Driver Dim Level Dim Level
Pendant Lighting Leto 11 - Pendant LED Light. LETO 11 is a large cylinder LED pendant designed for general light. It is the perfect pendant for creating even light throughout your space without distracting
Housing. Mounting. Warranty. Listing
6-inch aperture high lumen cylinder with lumen output 3470 0450lm. Additional features include outdoor/natatorium rating, and ColorFlip tunable white. - Outdoor/Natatorium Rating (Please refer to Outdoor/Natatorium
Features. Product Overview. Wattage: Lumen Output: Color Temp: Dimming: Construction:
Two Array LED Flood Light FL2 / BLK Features The Amerlux flood luminaire employs solid state technology and precision engineering to provide LED solutions for exterior signage, wall washing, and landscape
Features. Product Overview. Wattage: Lumen Output: Color Temp: Dimming: Construction:
Single Array LED Flood Light FL1 / BLK Features The Amerlux flood luminaire employs solid state technology and precision engineering to provide LED solutions for exterior signage, wall washing, and landscape
Nominal. Mounting. Length foot foot RUN Nominal Lengths* Suspension Bracket 1 Studs (Factory installed) Rotating Crossbar
M125 Project: Type: Qty: Series Lamping Mounting Nominal Length Finish Voltage Options Series M125R1 Flanged M125R2 Flanged / Flush Endcaps M125 For Concrete Pour Only Lamping 1T5 2T5 1T8 2T8 1T5HO 2T5HO
PROJECT INFORMATION. Project Name. Catalog #
PROJECT INFORMATION Project Name Type SLIM HIGH BAY LED Catalog # APPLICATIONS Retail Warehouses Manufacturing Plants Date Industrial Facilities Storage Facilities Large Open Areas UNLENSED (STANDARD)
Zeta 10 Series - Standard
0-inch aperture cylinder with aesthetic design and minimal visual impact suited for remodel or new construction. - ColorFlip (Please refer to Tunable White Version spec sheet) Utilize latest flip chip
* Optional TLPC shown. Mounting for Square Pole ORDERING INFORMATION 72W 108W 141W 188W 108LED 141LED 188LED. DM 0-10V Dimming. (Std.
Revised: 11.1.16 LED AREA / PARKING / STREET LIGHT LAP-G APPLICATION For all applications in site, area, and general lighting requiring high uniformity, excellent vertical light distribution, reduced offsite
Savvano Decorative LED Highbay
Savvano Decorative Highbay CAT.# APPROVALS JOB TYPE SPECIFICATIONS Applications - The Hubbell Industrial Savvano is perfect for retail, school and light industrial use. Its wide variety of lumen packages
Accessories* NOTE*: order separately; NOTE 1 : 347V stepdown transformer to be installed in a box provided by the customer.
P L A N E X PLX-1 LED PANEL Type: Project: LED Damp Location 1 x 1 Delivered Lumens: 123 lm Input Wattage: 2W Efficacy: 71 lm/w Colour Temperatures: 35K, 4K, 57K Low profile frame is just.5" thick Layers
Specification Sheet lumencove 2.0
Specification Sheet lumencove.0 Client Project name Order# Type Qty FEATURES AND BENEFITS Physical : Low copper content extruded aluminum housing Available in,,, or 8 sections Electro-statically applied
lumenfacade Specification Sheet
lumenfacade Specification Sheet Client Project name Order# Qty Type FEATURES AND BENEFITS Physical : Low copper content extruded aluminum housing Available in 1, 2, or 4 sections Electro-statically applied
The Tracking Magnet EVO Recessed High-tech LED lighting system for interior architecture
Description The new Tracking Magnet 8V system is creative, flexible, reliable and precise. Accent luminaires are installed by a magnetic fastening system and a secondary mechanical fastener. The range
High-tech LED lighting system for interior architecture
Description Fun with magnets and light. Simultaneously graphic and subtle, the Running Magnet is flexible, precise, and as creative as you. It is track lighting redesigned and elegantly refined. Light
TOGO 36 PENDANT DIRECT/INDIRECT
DESCRIPTION Togo provides generous ambient illumination from a minimal and elegant ring form. Nestled in a crisp 4" high opaque band, the distinctive, annular diffuser glows inwardly. The diffuser s softly
ibright 2X4 ECO Panel Model: FPUS24L FPUS24L Performance Summary
1212 mm (47.72") ibright 2X4 ECO Panel Model: FPUS24L3400002 FPUS24L3500002 ibright Flat LED Panel is a well-designed, lay-in ceiling troffer fixture widely used in offices, hospitals, and other professional
SPECIFICATION WATTAGE 60W 200W 300W PHYSICAL HOUSING EXTRUDED ALUMINUM HOUSING AND ALUMINUM END CAPS. POWDER-COAT PAINTED FINISH.
SHAPING THE EXPERIENCE OF EXTERIOR / NATATORIUM ASYMMETRIC INDIRECT ING WHITE / 60W - 300W DISTRIBUTION ASYMMETRIC SPECIFICATION COLOR TEMPERATURES 2700K, 3000K, 3500K, OUTPUT LUMENS & IES LM-79-08 LUMEN
lumenline 2 SPECIFICATION SHEET
lumenline Client: Project name: Order #: Type: Qty: FEATURES AND BENEFITS Physical : Aluminum extruded housing, wide Available in or 4 sections Durable polyester powder coat finish for trim Standard and,
LUMINIS QSL. Quick Ship Light
LUMINIS QSL Quick Ship Light Introducing LUMINIS Quick Ship Light: What you get when you add Light to a Quick Ship Program LUMINIS Quick Ship Light puts the focus where it really belongs on you. Your order
PREMIUM HIGH BAY INDUSTRIAL FEATURES
v q k Project Name: Part Number: Type: FEATURES Premium efficiency delivers maximum savings Aluminum body with steel channel for added rigidity Tool-less hinged bottom ballast access door High gloss polyester
Item # Part # Wattage Lumens Kelvin Voltage Type Distribution Custom Options Available*
Product Information The LITELUME Area Light Medium Luminaire (LL-ALM) combines style with performance. Featuring a die-cast aluminum housing with outstanding corrosion protection, and secondary UV resistant
Teava Linear display & suspension light system
Extruded aluminum display & suspension light system, Teava features specifically designed LED engine that provides constant illumination levels from the beginning to the end of the runs. vailable in sections
Typical Applications Heavy industrial Light manufacturing Warehousing Large indoor ORDERING INFORMATION V V V 2
Catalog Number Type Phuzion DesignLights Consortium (DLC) qualified product. Not all versions of this product may be DLC qualified. Please check the DLC Qualified Products List at www.designlights.org
FIXTURE WATTAGE OPTICS LUMENS EFFICACY (lm/w) MAX CANDELA
LINE VOLTAGE LED, EXTERIOR LINEAR LIGHTING Ideal for accent and facade lighting Integral power (line voltage 120V 277V) Wireless DMX capability Field installable accessories Tested to ANSI standards for
Type. Note. 2700K 3000K 3500K 4000K 4500K 5000K 5700K 6500K *Lumen Multiplier % 10% 25% 45% 60% 70% 85% 100% baseline 0.82
4-inch aperture high lumen atria with lumen output 1545 4470lm. - ColorFlip Utilize latest flip chip technology for optimum efficacy, delivering consistent high lumen output with 105LPW at CRI85+ when
FIXTURE WATTAGE OPTICS LUMENS EFFICACY (lm/w) MAX CANDELA
PROJECT: TYPE: CATALOG #: LINE VOLTAGE LED, EXTERIOR LINEAR LIGHTING Ideal for accent and facade lighting Integral power (line voltage 120V 277V) Wireless DMX capability Field installable accessories Tested
Genuine convenience consistently supports your success
Surface and suspended FluxStream LED Genuine convenience consistently supports your success Philips Day-Brite / Philips CFI FluxStream strip, industrial and wraparound luminaires It all adds up Now, more
2" max. 51 mm Ceiling thickness. 10 ¾" 273 mm. Series Lumens Installation Input voltage Version Dimming Options. VB Version B
⅝" max. ⅞" max. mm mm Fixture support members Blend Top view ½" sq. mm " sq. mm Ceiling cuut ¾" sq. mm comfort ¾" 0" min. mm 0" max. 0 mm mm " max. mm Ceiling thickness performance & ¾" mm in a downlight.
[Example shown: T1-SWPLED/A/40-40-HV-PCB] VOLTAGE - HV [Blank] V HV V
![[Example shown: T1-SWPLED/A/40-40-HV-PCB] VOLTAGE - HV [Blank] V HV V](/thumbs/92/110703219.jpg "[Example shown: T1-SWPLED/A/40-40-HV-PCB] VOLTAGE - HV [Blank] V HV V")
Job Name: Catalog Number: Type: Distributor: Prepared by: Date: S l i m W a l l P a c l k l T-1 Ideal solution for industrial, commercial and other wall pack applications T1-SWPLED DESCRIPTION The T1-SWPLED
Metalux VHB LED. Type. Catalog # Project. Date. Comments. Prepared by
DESCRIPTION The VHB is designed for a wide variety of applications and mounting heights with a balance of fixture performance and affordability. Precision designed optics, multiple distributions, lumen
Type. Project. Catalog No.
DESCRIPTION is an enhanced version of JESCO s ultra slim low profile S601. With 84 LEDs per foot, the product virtually eliminates hot spots, giving out even illumination. Units are interconnectable end-to-end
GE Evolve LED L-Series Wall Pack EWLS
The Evolve,, is a designed replacement for 50W to 250W HID, while offering significant energy savings in a long-life LED wall pack. The 's 2-screw housing design enables a fast and simplified installation.
TWIGGY S1, SQUARE 1" LENS TUNABLE WHITE 24VDC SYSTEM, 90+CRI
TWIGGY S1, SQUARE 1" LENS TUNABLE WHITE 24VDC SYSTEM, 90+CRI MADE IN THE USA 0.39" (.99cm) 0.9" (2.3cm) 4.6" (11.7cm) To Remote Power Supply 0.9" (2.3cm) 12" to 120" (30.5cm - 304.8cm) To Remote Power
TROFFER RETROFIT KIT (TRK)
Not all products are qualified on the DLC QPL. To view our DLC qualified products, please consult the DLC Qualified Products List at www.designlights.org/qpl. www.trulygreensolutions.com 4 MODELS AVAILABLE
A-TRACK HOUSING FAMILY. Semi-Custom. End to End Connectivity. Made in the USA. Custom Lengths. Semi-Custom to Meet Your Needs
SURFACE AT-SERIES DIM TO GLOW A-TRACK HOUSING FAMILY Semi-Custom to Meet Your Needs Semi-Custom Offered in a variety of shapes and sizes and endless customizable options End to End Connectivity Using our
ibright 2X2 Flat LED Panel Family Model Performance Summary
595 mm (23.43") EU version 40 mm (1.57 ") ibright 2X2 Flat LED Panel Family Model HCL-FLT8N-060000-F1 ibright Flat LED Panel is a well-designed, lay-in ceiling troffer fixture widely used in offices, hospitals,
Linear Lightplane System
Linear Lightplane System 1 Linear Lightplane System 2 Technologies & accessories 3 System Overview 4-5 Projects 6-7 Products - Surface and suspended 8-36 Mini, medium and large profiles Decorative suspended
Type. Project. Catalog No.
DESCRIPTION The S601 features an ultra slim low profile design giving professionals and non-professionals alike a lighting solution to a variety of applications. High output and easily concealable, the
ELEMENT offers five LED options that allow specifiers to choose the LED source they value most based on output, quality of light, color and more.
" LED This small aperture LED downlight is fully adjustable with ELEMENT s patented high-low lamp positioning. The innovative design allows the LED to be positioned closer to the aperture for maximum light
IP65 LED panels designed for laboratories, washdown facilities & other wet environments
IP65 LED panels designed for laboratories, washdown facilities & other wet environments Stainless glands & fixings provide ongoing corrosion Epoxy-free design CE, RoHS & UL international product marks
IVR15-SPI 1.5 Solid State Illuminated Rail 2 Post Integral Power Supply
1.5 Solid State Illuminated Rail 2 Post Integral Power Supply 1.50 RECOGNIZED 0.3 90 APERTURE Ends of Illuminated rail field cuttable to a minimum of 2 1/8 in length. Illuminated rail is available with
Scout Select System White
JOb Name : Fixture Type : one Engine - Three Intensities 2.5 5.0 10.0 2.5 Watts / Foot 180 Lumens / Watt 450 Lumens / Foot 5.0 Watts / Foot 150 Lumens / Watt 750 Lumens / Foot 10.0 Watts / Foot 120 Lumens
Linear LED strip - 24 VDC
Line LED LL series double row is a small profile high performance LED strip. The durable, but flexible products feature a heavier copper board core for better heat dissipation and even illumination over
performance & comfort
Blend performance & comfort in a downlight. CL-DL-VB CALCULITE LED " Total height of Light engine + Reflector ¼" mm PHILIPS LIGHTOLIER, CALCULITE, PROFESSIONAL-GRADE DOWNLIGHTING, LED " ROUND APERTURE
Dynamic white linear LED strip - 24 VDC
The LineLED DW52 is a small profile, high output light strip that alternates different CCT LEDs suitable for warm dim or dynamic white applications. It is easily installed within discrete aluminum extrusions
KLIK LEDpod XL28 Patented
240 N Brookfield Rd, Suite 3 PH: 22.505.5124 FX: 22.53.52 Fixture Type: Product Code: KLIK LEDpod XL2 Patented Flat R35 R40 Description Minimalist point source LED fixture with multiple outputs for use
3" LED SPECIFICATIONS DUAL ADJUSTABLE DOWNLIGHT
The ELEMENT " LED Dual Adjustable downlight provides high performance and beautiful architectural appearance when design requirements for task or accent lighting require two closely spaced downlights with
TRULINE 1A ORDERING CODES
Drywall Drywall with Plaster & Paint Description: TruLine 1A creates glare-free architectural lighting accents within 5/8" drywall. The 24VDC linear LED system features a shallow, 5/8" deep plaster-in
Project: Catalog No.: CALCULATED LIFETIME. Fixture Type: 100,000 HOURS. Notes:
AL SERIES AREA LIGHT Finish Color Dark Bronze White AL Series LED Area Light luminaries provide substantial energy savings through efficient delivery of light into all areas of parking lots or other large
3' 0" 6' 0" 5' 6" 5' 6" 5' 0" 5' 0" 5' 7 1/8"
A A.3 B B.3 B.6 C C. D 3' 0" 6' 0" ' 6" ' 6" ' 0" ' 0" ' 7 1/8" PARAPET HEIGHT 1' 8" 8" TOP OF STEEL HIGH 1' 0" 22.62 TOP OF STEEL LOW 14' 4" 19' 2" ' 0" 1' 0" 16' 0 1/4" 14' 8 3/4" CEILING HEIGHT 11'
A-TRACK HOUSING FAMILY Semi-Custom to Meet Your Needs. Semi-Custom Offered in a variety of shapes and sizes and endless customizable options
SURFACE A-TRACK A-TRACK HOUSING FAMILY Semi-Custom to Meet Your Needs Dynamic White Semi-Custom Offered in a variety of shapes and sizes and endless customizable options End to End Connectivity Using our
Albeo LED Luminaire LED High Bay Lighting (ABV3 - Series)
Albeo LED Luminaire LED High Bay Lighting (ABV3 - Series) Project name Date Type Product Description: The Albeo ABV3 LED luminaire is an exceptional mixture of value and performance. Ideal for high bay
Qty: L6R2 Continuous Flange (Flangeless Endcaps) 1B20 1,2 363 lm/4.7w per foot. 1B30 1,2 536 lm/7.2w per foot. 1B lm/8.
Date: Customer: Project: Type: Qty: M60 Order Code: - - - - - - - - - - - - Series L60 Multi-Mount Form L6R1 Continuous Flange (Flanged Endcaps) L6R2 Continuous Flange (Flangeless Endcaps) Light Engine
RGBW 8.8. RoHS Compliant DIMENSIONS PART NUMBER BUILDER = Your Part Number
+ RGB + White RoHS Compliant 24 Volt DC Input 8.8 Watts per foot 36 LEDs per foot IP65 and IP68 versions are UV resistant 3000K, 6000K Cuttable every 3.94 inches (100.0 mm) DIMENSIONS LED on center: 0.66
Decorative luminaires for commercial and retail applications. Acuity Brands Indy Commercial/Retail Lighting
Commercial & Retail Lighting Decorative luminaires for commercial and retail applications Acuity Brands Indy Commercial/Retail Lighting I II Acuity Acuity Brands Brands Indy Indy Commercial/Retail Lighting
* Use only when exposed to salt spray and harsh chemicals. This option is not required for normal outdoor exposure! 5-year limited warranty.
Client Project name Order# Qty Type FEATURES AND BENEFITS Physical : Low copper content high pressure die-cast aluminum housing Heavy aluminum formed yoke (standard yoke included) Stainless steel hardware
Recessed linear illumination
Extruded aluminum linear corners complete an area that contains corners or straight turns. Kilo Recessed orners have mitered cuts that are available in a standard 90, or custom angle. The Kilo Recessed
Suitable for applications requiring 3G testing prescribed by
PRODUCT IMAGE(S) SPECIFICATIONS Construction: Stylish vertically finned die-cast solid top housing for maximum heat dissipation; Stops collection of unsightly debris Rugged lower die-cast aluminum heat
3" LED SPECIFICATIONS DUAL ADJUSTABLE DOWNLIGHT
" LED The ELEMENT " LED Dual Adjustable downlight provides high performance and beautiful architectural appearance when design requirements for task or accent lighting require two closely spaced downlights
Project Name. Date. Cat. Number. Type
Hosedown Series 2.0 Enclosed and Gasketed LED Luminaires The improved Hosedown Series features LED high bay fixtures for use in demanding environments requiring watertight seals. Each model includes an
THE HIGH. Retro-Fit Kits (all lengths & full specification) PERFORMANCE KEY FEATURES INCLUDE:
THE HIGH PERFORMANCE LED Replacement Series for Fluorescent Tubes, High Bays, and Parking Garages. KEY FEATURES INCLUDE: Advanced Thermal Management Industry Leading Deep Fin Heat Sinks with Aircraft Grade
AL SERIES. AL Series - 75 Watts. Key Features & Benefits: Technical Specifications: Additional Options: ESL. Reference Guide WATTS GENERATION COLOR
AL SERIES AL Series - 75 Watts Project: Catalog #: Notes: Date: Key Features & Benefits: Housing: - Rugged anodized aluminum housing - Self-cleaning heat sink Mounting: - Slip Fitter - Direct Arm Mount
Ambient Operating Range. See ambient operating table on page 2. Fixture Certification & Listings
Applications APOLLO WTLED2 is designed for demanding interior environments that require a wet-rated enclosed fixture in both high and low bay settings. Applications include agricultural and exterior industry,
Calculite LED 4x4" Lensed Wall Wash
¾" sq. mm ¾" mm Total height of Light engine + ¾" mm ¾" mm Project: Downlighting Location: Cat.No: Type: Calculite LED " features an LED array of high brightness white light LEDs. The new LED boards in
AREALIGHT.B MOQ: 100 pieces Week Lead Time
MOQ: 100 pieces 14 16 Week Lead Time Product Information The Arealight.B is a low maintenance, energy saving decorative LED fixture for high output lighting. The architectural pole top LED lighting fixture
Catalog. Summer
Catalog Summer 2016 403-800-3044 customercare@utechnology.ca www.utechnology.ca Table of Contents Part A: Ceiling and Cabinet Lights MIKRA Cabinet Lighting 1 DISC DL-DIRECT 2 Part B: LED Flex Tape UNITI
PROJECT: SPECIFIER: TYPE: QTY: OUTPUT LEVEL: COLOR: LENGTH X WIDTH: MOUNTING: DIMMING/CONTROLS:
PROJECT: SPECIFIER: TYPE: QTY: Available in 5 output levels of Static White at 24 Volts RGB and RGBW available at 24 Volts Tunable White and Double Sided available Great for creating Luminous Ceilings
BOLLARD.S Product Information The Bollard.S is a distinctive ground LED lighting fixture.
Product Information The Bollard.S is a distinctive ground LED lighting fixture. This durable fixture is designed to deliver clear illumination. The LED fixture features an extruded aluminum housing with
Available Beam Angles 8, 15, 30, 45, 40 x 9, 60 x 20 Shielding and Glare Control. EasyGlow TM glare reduction technology
FEATURES The LS9142 is a powerful LED fixture with exceptional light output. Available in a wide variety of optical configurations including narrow spot and bi-symetrical distributions, the LS9142 is a
FLUSH MOUNT DISK LIGHT
7 www.lum-techlighting.com FLUSH MOUNT & DISK LIGHT CMED-605 DoB 5 Ceiling Puck CMED-607 DoB 7 Ceiling Puck [CMED-605 : 5 ] (5.5"dia. x 1") Ceiling Puck Ceiling [ CMED-607 : 7 ] (7"dia. x 1") Ceiling Puck
Atria 6 - Tunable White Version (ColorFlip )
6inch aperture high lumen atria with lumen output 380 000lm. ColorFlip Utilize latest flip chip technology for optimum efficacy, delivering consistent high lumen output with 0LPW at CRI8+ when color tuning
2" max. 51 mm Ceiling thickness. Series Lumens Installation Input voltage Version Dimming Options 1
⅝" max. ⅞" max. mm mm Fixture support members Make " min. mm " max. mm ⅛" dia. mm Ceiling cuut the switch LED. ⅞" mm " max. mm ¼" mm CL-DL-VB WHITE LED ½ " Reflecr ¾" mm ⅜" mm PHILIPS LIGHTOLIER,, PROFESSIONAL-GRADE
LED Design Lighting STANDARD Products Inc. All Rights Reserved. Rev. March 22, 2018.
0 LED Design Lighting Create a cozy atmosphere or emphasize a specific element of your decor with STANDARD's Design and Accent Lighting line. It is widely versatile and adapts perfectly to several types
lumenbeam SPECIFICATION SHEET
Client: Project name: Order # Type: Qty: FEATURES AND BENEFITS Physical : Low copper content high pressure die-cast aluminum housing Heavy aluminum formed yoke Stainless steel hardware Silicone sealing
Product Brochure Edition 1. t: f: e: doncastercables.com
Product Brochure Edition 1 t: 01302 821700 f: 01302 821701 e: sales@ LED Highbay Ultra efficient up to 140 Lumen/Watt Superbly reliable MEANWELL HGB driver 1-10V dimmable as standard Latest LED technology: