Product Specifications

Transcription

1 s Optical Coherence Tomography System Inner Vision 2000-WR Signature Approved Checked Author Document number Version C.Chong A.Morosawa D.Ogawa Page 1 / 10

2 -Ordering code- - WR Customize Spec / Yes: C, No: 0 Foot Switch / Yes: F, No: 0 Wagon / Yes: W, No: 0 Microscope Stage / Yes: S, No: 0 VI File / Yes: V, No: 0 Multi Slice Viewer / Yes: M, No: 0 Amira/ Yes: A, No: 0 OCT Viewer / Yes: V, No: 0 Probe type / F40 type : 4 F60 type : 6 Custom : C Page 2 / 10

3 -Outline Outline- 1. Product to be specified P.4 2. Product name and part number P.4 3. Configuration P Specifications P.9 5. Test report P.9 6. Shipping P Packing P Included documents P.9 7. Warranty P Appendix P Revision history P.10 Page 3 / 10

4 1.. Product to be specified This product specification is applied to. 2.. Product name and part number Product name : Inner Vision Part number : -WR 3.. Configuration The product consists of these four main functional blocks. Function Consisting elements Note Light source unit Interferometer unit (-Core) Wavelength Scanning laser Source Interferometer Balanced photo receiver Optical attenuator Optical delay line HSL-2100-WR Refer to SS-9A-1730 the detail spec. Mach-Zehnder interferometer with balanced detection (Detection bandwidth 80MHz) *The delay line can adjust delay in a range of about 30mm from outside of system. Control / Image processing unit Probe unit PC Data Acquisition board Inner Vision Collimating lens Focusing lens 2 Axis Galvano Scanner Windows7(64bit) - Operating software for φ6.7 F40 type : F= 40, F60 type : F= 60 *See Fig3-2-1,3-2-2 Customize specification Function Consisting elements Note Option Item Yes / No Note OCT Viewer TBD 3D Imaging Software Amira TBD 3D Imaging Software Multi Slice Viewer TBD 2D Viewing and Analyzing Software VI File for customizing the OCT program TBD Microscope stage TBD With CCD camera Wagon TBD Foot switch TBD VI File for customizing the OCT program (Inner Vision) by LabVIEW 2012 (exclude LabVIEW licence) Page 4 / 10

5 Display Probe unit Microscope stage (Option) Light source Unit Wagon (Option) -Core PC Fig3-1. system image <Probe dimension > Fig F40 type Page 5 / 10

6 Fig F60 type <Microscope stage > *option Fig3-3. Microscope stage Page 6 / 10

7 <Option parts> - Foot Switch * Option - License key ( for OCT Viewer or Multi Slice Viewer) *Option <Software> - Inner Vision - OCT Viewer *Option - Multi Slice Viewer *Option Page 7 / 10

8 <Configuration> Page 8 / 10

9 4. Specifications Wavelength range Parameter Specification Note Center: nm Range: 170nm Min. Axial resolution <9um In Air / FWHM Mini. Lateral resolution Depth of Focus Working distance Image acquisition speed Max. displayed imaging depth Transverse imaging range F40 type : 6um F60 type : 9um F40 type : 0.1mm F60 type : 0.3mm F40 type : 40mm F60 type : 60mm 20,000 lines per second >4mm F40 type : 10mm F60 type : 15mm Axial pixel size >1000 Transverse line size >250 Design guaranteed / FWHM Object lens to focal point Optical output power at the probe >4mW Peak Power <15.6mW Operation temperature range 25±5 Storage temperature range 10~40 Temp should be maintained constant Storage humidity range 80% No condensation 5. Test report 1. Optical output power 2. OCT image of thumb 6.Shipment 6-1.Packing Product is packed in the shipping box that protects the products from external impact during transportation. 6-2.Included documents Test report Operational manual Page 9 / 10

10 7.Warranty This product is warranted by Santec Corporation of Japan against defect in material or workmanship for a period of one year from the date of delivery. In the event that a defect occurs during the warranty period, Santec Corporation of Japan will repair this product within a reasonable period of time after notification, free of parts and labor charges, provided that (a) the defective unit is returned to Santec Corporation of Japan, if required, or a specified Santec repair facility; (b) all shipping/customs costs to Japan are paid by the owner of the defective product; (c) the defective unit has not been damaged by power failures or power surges, fire, water, pest or rodent infestation, an act of war, or any other act of nature; and (d) the user has followed the instructions in the operation manual. Any unauthorized modification, repair, or attempt to repair will render this warranty VOID. Santec will not be responsible for the product when the seals have been broken or damaged. This warranty is effective only for the original purchaser of this product and is NOT transferable. All other expressed warranties are disclaimed and all implied warranties for this product, including the warranties of merchantability and fitness for a particular purpose, are limited in duration to a period of one year from the date of delivery. In no event shall Santec Corporation of Japan nor any subsidiary of Santec nor any distributor of Santec s products be liable to the customer for any damages, including lost profits, or other incidental or consequential damages arising out of the use or inability to use this product. All requests for repair or service under this warranty must be made as soon as possible after the defect has been noticed and must be directed to the original seller of the product, whether a distributor of Santec s products, a subsidiary of Santec Corporation, or Santec Corporation of Japan. 8.Appendix No appendix to this document. 9.Revision history Ver Date Contents 2013/06/26 Draft Version Page 10 / 10