DF-S 100 SE. -Patent pending- User Manual

Size: px

Start display at page:

Download "DF-S 100 SE. -Patent pending- User Manual"

Julie Morris
6 years ago
Views:

1 DF-S 100 SE -Patent pending- User Manual

2 1 Index I. Unpack Rollei DF S 100 SE....2 II. Install film in the film holder...3 III. Quick Start...6 IV. Operation Guide...11 V. Specification...30

3 - 2 - I. Unpack Rollei DF-S 100 SE Rollei DF-S 100 SE Negative/Slide Film Holder User Manual USB power core USB/Video cable Clean brush Note We strongly suggest using a clean, dry, non-alcohol cotton swab to clean the glass surface periodically to produce a clear image during operation. Clean dust from FilmScanner back light. Use the clean brush to wipe the dust. Dust or dirt from the negative, slide films and cover trays may affect the scanned image quality, please make sure the materials are cleaned before inserting into the scanner. Please find recommend, processional purger from photo store to clean the dust on films if any to avoid damaging the only one copy of old films.

4 3 II. Install film into the film holder Install the Slide into holder 1. Open the slide holder as illustrated 2. Put slide into positive slide slot 3. Close the film holder Install the Negative Film into holder 1. Open the film holder as illustrated

5 4 2. Install film into negative film slot 3. Close the film holder Note To avoid mirror image, follow the serial numbers (from left to right) on top of film when install negative film into holder Figure 1 If the image is upside down [see fig.2], the image can be corrected by Flip function with the Flip hard key of the device before capturing, or enter playback edit menu after capturing [see fig.3.4]. Figure 2

6 5 Down/Flip button (Flip hard key) Flip Press flip hard key on top of device during live view Figure 3 Playback mode menu Figure 4

7 6 III. Quick Start Up/Mirror button Power button Power status LED Down/Flip button OK button Film Slot SD card Slot USB port TV out jack

8 7 1. Put Film in the film cartridge 2. Insert the film cartridge into Rollei DF S 100 SE

9 8 3. Connect USB cable to Rollei DF S 100 SE 4. Turn on Device with the power button

10 9 5. Press OK button to capture the image 6. Follow the menu on display for scanning

11 10 7. After the capture is finished, take out the SD card which stored capture images 8. Or read picture from PC by MSDC mode

12 11 IV. Operation Guide Home: Main menu 1. Capture Capture Playback Film Type USB mode Setting Capture: capture mode (default) Playback: playback mode Film Type: define the film type which loaded in cartridge USB mode: MSDC (Mass Storage Device Class) mode Setting: TV out and format option Capture After welcome page, above menu will remains for 5 sec. User can press up/down button for desired menu. Or system will auto enter Capture mode if there is no action during this 5 second period.

13 Capture: Mirror/Flip (Hard Key) Down/Flip button Up/Mirror button Mirror Press Up/Mirror button to change image left to right Flip Press Down/Flip button to upside down image

14 Capture mode Live view indicator (flashing at 0.5sec rate) In the capture mode, there will be a red indicator on left top corner to indicate the live view mode. When the film cartridge is inserted into the scanner slot, the image always shows the positive image according to previous defined Film Type (the default setting is "Negative Film"). Reconfirm the film position on the display before pressing the OK button. 1.3 Capture: Edit Menu Save Rotate +90 Rotate 90 Cancel Save: save captured image Rotate +90: continue rotate +90 degrees Rotate 90: continue rotate 90 degrees (to adjust the picture) Cancel: cancel any editing with this image Home: Back to main menu Selected image Home

15 Live View > Capture/Edit Menu Live View Capture/Edit Menu OK Pressing the OK button in live view mode, the edit menu appears on the screen. Pressing the OK button again, the current image will be saved on the SD Card. The live view mode appears on the screen again. 1.5 Capture: Save OK Save After pressing the OK button the preview (live view) image will be selected and shown for 3 4 seconds with the 4 icons on the left side of the screen. The save icon is highlighted to confirm the saving. Press OK button to save the picture. The live view mode appears on the screen again.

16 Capture: Rotate +/ 90 degrees OK To rotate the picture, select the Rotate +90/ 90 icon and press OK button. The picture rotates and the save icon will be highlighted. Press OK button again to save the rotated image on SD Card. The screen returns to the live view mode. 1.7 Capture: Cancel Playback /captured image Select Cancel and press OK button to cancel any of the editing step with present selected image and Rollei DF S 100 SE goes to live view mode (nothing will be saved on the SD Card).

17 Capture: Home OK To enter the main menu, highlight the Home icon and press OK button. 1.9 Exit from Edit mode back to Capture mode (Live View) Next image in film cartridge After saving or canceling the picture the capture mode/live view mode appears on the screen again. Move the film cartridge to the next image for editing or capturing.

18 Memory full OK When the internal memory or SD Card is full, an icon "Full" appears on the screen. Please download the pictures from the internal memory to your computer or use another SD Card to continue SD card locked SD card locked indicator If an "SD Card locked" icon appears on the screen, please unlock the SD Card (slide the lock switch on the SD Card to the unlock position).

19 SD card error SD card error indicator If the "SD Card Error" Icon appears on the screen, please take the SD card out and insert it again. If the fault still appears, try to format the SD Card (Caution: With the format option all files on the card will be deleted!), or use another SD Card to continue the further operation. (Refer to Setting selection on page 31).

20 19 2. Playback Playback To enter the playback mode access the Main menu (Home icon) and highlight the playback icon. Press OK button to confirm the selection. 2.1 Playback: Auto Slide Show Slide show mode In the playback mode (default setting is slide show) the Screen will auto display all images stored on the SD Card with a 2 seconds interval. To stop the slide show, press OK button.

21 Playback: Edit Menu Rotate +90 Rotate 90 Mirror Flip 2.3 Playback: Slide mode > Edit mode Exit Delete Save Home Rotate +90: captured image rotate +90 degrees Rotate 90: captured image rotate 90 degrees Mirror: change image left to right Flip: upside down image Exit: returns to Slide show Delete: delete this picture stored on SD card Save: save the modified image on SD card Home: returns to main menu To stop the slide, show press the OK button. Now a single picture will be displayed. To scroll to the next or previous picture use the Up/down button. If a picture is selected, press OK button to enter the Edit mode again.

22 Slide Show > Single picture > Edit mode Pause OK OK Slide show mode Single picture mode Use Up/Down button to scroll to the picture to be modified Edit mode 2.5 Playback: Rotate/Mirror/Flip/Save OK To rotate a picture highlight the rotate function and press OK button. The save icon will be highlighted after rotating. Press OK button again to save modified result and next picture will be shown (N+1). For continuously Rotate +90 degrees, move cursor to Rotate again and press OK. (Same for Rotate 90, Mirror, and Flip function)

23 Playback: Exit OK When selecting the Exit function in the edit menu, the display will go back to slide show starting with the current picture in internal memory or SD card without saving any change of present picture 2.7 Playback: Delete OK To delete the present selected picture, highlight the Delete Icon and confirm it with OK button. The next Picture will be shown (N+1). Cursor goes to Exit icon. If user intend to process continuously delete, just move to delete icon again and press OK to confirm.

24 Playback: Home OK To enter the main menu, select the Home icon and press OK button. 2.9 Playback: No Picture OK If there is no picture on the internal memory or SD card when enter playback mode, a "No picture icon" will be shown on display.

25 24 3. Film Type Film Type To change the film type definition enter the main menu (Home icon). Highlight the film type icon and confirm with OK button. 3.1 Film Type: Select Film Type Color Negative film Slide B&W Negative film Negative film: select Negative film when cartridge loaded with negative film Slide: select Slide type when load slide in holder B&W film: select B&W when cartridge loaded with Black&White negative film Highlight desired film type and confirm with OK button.

25 3.2 Film Type: Example Color Negative film

26 Film Type: Example Color Negative film B&W Negative film Loaded into Cartridge Slide

27 26 4. USB Mode USB mode Please select the USB Mode icon to download the stored pictures from the internal memory or SD Card to your PC. Connect the Rollei DF S 100 with the USB Cable to your computer and confirm the USB mode with the OK button. A Mass storage device will be installed to your computer. Open "My computer" to find the external storage device. Or insert the SD Card in a SD Card reader to download the pictures directly. 4.1 USB Mode: Status When the Rollei DF S 100 SE is connected to a computer and the USB mode is confirmed, a USB Icon appears on the screen.

28 27 5. Setting Mode Setting mode For the TV Out and Format options enter the Setting mode in the main menu (Home Icon). You can connect the Rollei DF S 100 SE to a TV to edit the pictures or to view the scanned pictures on the TV display. Use the format option to format a faulty memory card. Caution: All Files on the card will be deleted! 5.1 Setting Mode TV out Format Exit TV out: select NTSC or PAL according to required interface Format: format internal memory or SD card Exit: returns to main menu

29 Setting: TV out OK To connect the Rollei DF S 100 SE to a TV, select the option "TV" and confirm with OK button. Select the desired TV signal (PAL or NTSC) and press OK button again. The TV Display will show the same screen as the Rollei DF S 100 SE and you can view, edit or scan your pictures on the TV Display. 5.3 Setting: Format OK If the internal memory or SD card requires to be formatted by the scanner, you can enter the format mode by press OK button. The default setting is set to "cancel format". Press OK button again to cancel the format or select confirm icon to confirm the format option. Note If there is no SD card inside the device, the internal memory will be formatted. If a SD card is inserted in the device, only the SD card will be formatted.

30 29 Good bye page When switching the Rollei DF S 100 SE off, the Goodbye screen appears on the screen.

31 30 V. Specification Image Sensor: Lens: LCD: Internal memory: Focus Range: Exposure Control: Color Balance: Scan Quality: Data Conversion: Scan Method: Light Source: Interface: USB Configuration: Power: Dimensions: Weight: 5 mega CMOS sensor F no.=2.0, 4 Glass elements, 2.4 Color TFT LCD 24MB NAND Flash (for saving images) Fixed focus Automatic Automatic 1,800 dpi 10 bits per color channel Single pass Back light (3 white LEDs) USB 2.0, TV out (video 3.5mm jack) Mass Storage Device Class/MSDC 5V adapter, or USB power 82x86x152mm 0.41kg

ROLLEI DF-S 290 HD. -Patent pending- User Manual

ROLLEI DF-S 290 HD. -Patent pending- User Manual ROLLEI DF-S 290 HD -Patent pending- User Manual Version 1.01 Mar 2011 Index I. Unpack Rollei DF-S 290 HD Professional Scanner...2 II. Install film into the film holder...3 III. Quick Start...6 IV. Operation