1/2" 3-CCD DV Camcorder System GY-DV500E and BR-DV600E VTR

Transcription

1 1/2" 3-CCD DV Camcorder System and VTR 18 Combining convenience and cost-effectiveness of MiniDV with professional performance and features 800 TV lines equivalent horizontal resolution from camera head 14-bit digital signal processing Up to 60 minutes of high-quality component digital images recorded on a single readily available and inexpensive Very compact, lightweight design weighing only 5 kg (11 lbs.) Three 1/2" 440,000-pixel CCDs Advanced circuitry virtually eliminates vertical smear when shooting bright lights, as well as lag and image burn F1.4 prism optical system helps to yield F11 at 2000 lux Lolux mode captures high-quality video footage with excellent colour balance at just 0.75 lux illumination IEEE 1394 (DV) output for lossless digital video and audio transfers to any DV equipped device such as a non-linear editing system or DV recorder Basic controls are available via the DV connector or RS-232C port, make the ideal as a spooler or player in an editing system Standard professional 1/2" bayonet lens mount, for the widest selection of lenses Outstanding digital PCM sound: Choose between two 16-bit 48-kHz channels or two 12-bit 32-kHz channels with a dynamic range of more than 85 db Viewfinder displays various events, camera settings, recorder operation, and selected setup parameters Super Scene Finder (SSF) lets you log scenes automatically or manually in the field, and mark which scenes are good. This speeds up the transfer process and saves disk space, because now you can batch digitise only those scenes needed for editing. Scene data is written directly onto the MiniDV cassette, eliminating need for special higher priced cassettes. Up to 119 scenes can be marked per cassette Scene data from last 6 cassettes held in camcorder memory, allowing data to be downloaded via the RS-232C to a PC to create a log file or EDL file at a later time. Menu dial serves to quickly and easily navigate through viewfinder menu, as well as set shutter speed Full auto shooting for one-touch automatic operation Continuous auto black (CAB) Full auto white Automatic level control (ALC) for continuous automatic control of gain Back tally lamp for letting talent behind the camcorder know you are shooting Precision Accu-focus mode for easy, precise lens focusing Back-lit LCD display for VTR menu and status indications Tape/battery remaining indicator Variable scan view for shooting computer screens Sync lock mode for multi-camera shooting (genlock) Black stretch/compress for enhancing or suppressing shadow areas Adjustable gamma for adjusting the feel of the picture according to taste for light or dark detail Adjustable detail frequency for setting picture sharpness for a bolder or finer look EBU time code reader/generator Professional XLR Audio with phantom microphone power EBU type colour bars professional DV VTR Ideal for interfacing with virtually any editing system linear or non linear IEEE 1394 in and out allows direct computer/nle connectivity Digitally spools directly to a non-linear editing platform and downloads directly back to video tape with no loss of quality Dubs tapes to and from other DV products, including Both Y/C and component video out Controllable with standard edit controllers via either RS-422 or optional RS-232C connectors, or proprietary 12-pin JVC interface Super Scene Finder lets users log scenes, and mark which scenes are good

2 1/2" 3-CCD DV Camcorder System and VTR 19 KA-50U MIC HOLDER VF-P115B VIEWFINDER GY-DV500U STANDARD PACKAGE CARRYING CASE CB-P28

3 and Specifications 20 General Power requirements: DC 10.5 V to 17 V Power consumption: Dimensions: Weight: Approx. 20 W 275 (W) x 245 (H) x 130 (D) mm 5 kg including viewfinder, battery, microphone and tape Temperature: Operating: 0 C to 40 C/Storage: -20 C to 60 C Humidity: Camera section Image pickup device: Operating: 30% to 80% RH Storage: 85% RH or less 1/2" interline-transfer CCDs Colour separation optical system: F1.4, 3-colour separation prism Number of effective pixels: Resolution: Colour system: Colour bars: Sync system: Lens mount: Optical filter: 440,000 (752 (H) x 582 (V)) 800 TVL performance (R-Y, B-Y encoder) EBU type Internal sync, external sync (VBS) 1/2" bayonet system Sensitivity: F11, 2000 lux 3200K, 5600K, 5600K + 1/64ND Gain: -3, 0, 6, 9, 12, 18 db, variable gain in ALC and LOLUX Minimum illumination: 0.75 lux with F1.4, LOLUX Registration: 0.05% or less (excluding lens distortion) Detail correction: Electronic shutter variable range: VTR section Format: Signal format: Usable tape: Tape speed: Record/play time: FF/rewind time: [Video] Video signal recording format: Horizontal and vertical dual-edged Standard value: 50 Hz Fixed values: 120, 250, 500, 1000, 2000 Hz Variable scan: 50.1 to Hz DV format mm/sec. (SP mode) S/N: 47 db or more Resolution: [Audio] Audio signal recording format: Frequency response: S/N: Dynamic range: [Connectors] Video output: Y/C output: Audio inputs (AUDIO 1, AUDIO 2) Line outputs (LINE 1, LINE 2): IEEE 1394 interface: 4-pin 60 minutes or more (with an MDV-60 tape) Within 120 sec. (with an MDV-60 tape) 8-bit, 13.5 MHz, 4:2:0 component recording 500 TVL or more (monitor out) 16-bit, 48 khz or 12-bit, 32 khz PCM for 2 channels 20 Hz to 20 khz (16-bit), 20 Hz to 14.5 khz (12-bit) 60 db or more 85 db or more 1.0 Vp-p, 75 ohms (BNC) (composite video signal) RS-232C interface: Mini DIN 6-pin Included accessories: Y/C signal, 4-pin, 75 ohms, unbalanced MIC: -60 dbs, low impedance (XLR), balanced LINE: +4 dbs, 10 kohms, balanced -6 ± 1 dbs, low impedance (RCA), unbalanced Instruction manual Viewfinder Microphone with mount General Power requirements: AC V, 50/60 Hz, DC 12 V (11 V to 17 V) Power consumption: Dimensions: Weight: Approx. 27 W 212 (W) x 88 (H) x (D) mm Approx. 4 kg Temperature Operating: 5 C to 40 C Storage: -20 C to 60 C Humidity Format: Signal format: Usable tape: Tape width: Tape speed: Record/play time: FF/rewind time: [Video] Video signal recording format: Sampling frequency: S/N: Video inputs Analogue composite: Analogue Y/C: Analogue component: External sync input: Video output Analogue composite: Analogue Analogue component: [Audio] Audio signal recording format: Frequency response: Dynamic range: Audio input Audio output [Time code] Input: Output: [Connectors] IEEE 1394 interface: RS-422 interface: JVC bus connector: Operating: 30% to 80% RH Storage: 85% RH or less DV format 6.35 mm mm/sec. (SP mode) 80 minutes (with an MDV-80 tape) Within 120 sec. (with an MDV-60 tape) 8-bit, 13.5 MHz, 4:2:0 component recording Y: 13.5 MHz, R-Y/B-Y: 6.75 MHz 47 db or more 1.0 Vp-p, 75 ohms C: 0.3 Vp-p, 75 ohms R-Y/B-Y: 0.7 Vp-p, 75 ohms 0.3 Vp-p, 75 ohms 1.0 Vp-p, 75 ohms Y/C: C: 0.3 Vp-p, 75 ohms R-Y/B-Y: 0.7 Vp-p, 75 ohms 16-bit, 48 khz for four channels or 12-bit, 32 khz PCM for 2 channels 20 Hz to 20 khz, +1.0/-5 db (16 bits) 85 db or more (PCM audio) Line: -6 dbs, high impedance, unbalanced Mic: -67 dbs, 600 ohms, unbalanced Line: -6 dbs, low impedance, unbalanced Monitor: -6 dbs, low impedance, unbalanced Headphone: - infinity to -17 dbs, 8 ohms 0 ± 6 dbs, high impedance, balanced 0 ± 3 dbs, low impedance, balanced 4-pin D-sub 9-pin DIN 12-pin Included accessories Instruction manual x 1 AC cable x 1 Options RM-G30U remote control unit SA-K46U RS-232C interface board

4 / Optional Accessories S14 7.3B12U 14:1 Power Zoom Lens S19 6.5B12U 19:1 Power Zoom Lens YH14 7.3KRS 14:1 Power Zoom Lens YJ18 6.7K12U 18:1 Power Zoom Lens HZ-ZS13BU Zoom Servo/Record Trigger Control Unit 21 (Fujinon) (Fujinon) (Canon) (Canon) VF-P115BE 1.5 Viewfinder VF-P116E 1.5 Viewfinder VF-P400E/KA-A40 4 Viewfinder/Viewfinder adapter(required) BH-P27U Battery Holder for NB-G1U or NP-1 HZ-FM13U Focus Manual Control for Fujinon Lens (excluding S14 lens) HZ-FM15U Focus Manual Control for Canon Lens NP-1 Type Battery User supplied battery (Battery holder provided) AA-P250E AC Power Adapter/ (Charger for NB-GIU) AA-G10E Battery Charger for NB-G1U AC Power Adapter NB-G1U Ni-Cd Battery (2.2Ah) MDV-30 MEAE 30 minute tape MDV-60 MEAE 60 minute tape MDV-12CL DV Cleaning tape VC-P893U RC-232C PC Interface Cable RM-LP55U Camera Remote Control Unit MV-P615U Microphone KA-A50 Mic Holder CB-500U Carrying Case RM-G30U BR-DV600 VTR Remote Control SA-K46U BR-DV600 RS-232C Interface Board VC-P894U RC-232C Mac Interface Cable

5 Compact Progressive Digital Still Camera, DV Camcorder GR-DLS1E 22 Progressive scan still picture and progressive scan video; 500 TV lines horizontal, 560 TV lines vertical resolution. In progressive scan 450K pixel 1/3" IT CCD provides quality equivalent to 900K pixel CCD Progressive CCD filter based on complementary colours (W/ G/Ye/Cy) allows full vertical luminance resolution of 560 lines TV lines and high sensitivity, because luminance signal is produced from each row of pixels High bandwidth processing retains full 500 TV line horizontal resolution (Normal processing must cut high resolution to avoid colour interference) Bright images, thanks to F1.2 10x zoom lens (5-50 mm) and high sensitivity progressive filter system 5 lux sensitivity, 2.5 lux in progressive scan (1/25 shutter) mode 40x digital zoom and 100x super digital zoom with spline interpolation for smooth diagonal images 2-channel 16-bit 48 khz audio or 4-channel 12-bit 32 khz audio Up to 600 image progressive scan digital still capacity on one DV tape in snapshot mode, 100,000 per tape in progressive video mode No docking station or capture board required when using JLIP terminal to transmit serial data Digital Still images to standard PC serial port 10x positionable zoom on previously recorded images Random assemble edit (RAE) mode Wide range of in-camera digital effects RS-232 control by PC Software provided: Editing -- JLIP Video Producer Capture -- JLIP Video capture 2.0 Paint -- Photosuite SE DV standard IEEE1394 terminal for lossless digital video output to other DV standard devices 4" LCD colour video monitor, audio speaker Colour viewfinder also High capacity 1.4 Ah lithium ion batlery; with viewfinder use and external battery case 3 hours, with viewfinder use and optional high capacity battery case 6 hours Auto lens cover and power on / off Remote control provided Compact size, 780 grams with battery and tape Format Mini DV digital component recording Audio recording format PCM digital stereo Image sensor 1/3" Progressive Scan CCD, 450,000 pixels Lens F1.2 (f = mm) Monitor 4" colour LCD monitor Viewfinder 0.55 inch colour Continuous recording time 80 min. (LCD monitor ON), 100 min. (viewfinder ON), 9 hours (using the optional battery case and belt-holder type battery) Terminals DV (IEEE 1394 compliant), S, AV, Edit JLIP (also used for RS-232C digital still data transfer) Dimensions (W x H x D) Weight Power supply Power consumption 86 x 86 x 145 mm (excluding lens hocd) Approx. 780 g with battery and tape DC 6.3 V (AC adapter), DC 7.2 V (batteries) 8.2 W (LCD monitor ON), 6.3 W (viewfinder ON) Provided accessories AC power adapter & battery charger Standard battery pack (BN-V814) x 2 Long-life battery pack (BN-V856) Battery case Lens hood Shoulder strap Software (CD-ROM) -- JLIP Video Capture Ver. 2.0, JLIP video Producer, MGI PhotoSuite SE PC cable S-video cable AV cable Edit cable DC power cable MiniDV cassette Wireless remote control Battery for remote control SCART/RCA adapter