Fixture Options: Ordered Separately from Fixture. See pages 2-3. Mounting Options: Ordered Separately from Fixture. See pages 4-6

Size: px

Start display at page:

Download "Fixture Options: Ordered Separately from Fixture. See pages 2-3. Mounting Options: Ordered Separately from Fixture. See pages 4-6"

Charity Little
6 years ago
Views:

1 Catalog number: / Mode Finish Options: See pages 2-3 ing Options: See pages 4-6 Approvals: Date: Page: 1 of 6 Specifications Housing: Die-cast aluminum body, lamp housing and socket enclosure. Swivel: Die-cast aluminum with locking teeth and K" solid brass NPT mount. Provides horizontal rotation independent of the threaded mount. Swivel locked by J-20 stainless set screw. Clear anodized prior to powder coating for added corrosion resistance. Lens: Tempered clear soda lime glass with silicone gasket. Flush with lens frame to promote water runoff when positioned upward. Lens Frame: Integral die-cast aluminum lens ring and glare shield. Gasketing: Silicone gaskets used throughout. Optical System: 6 LED emitters configured in a circular array, mounted on yoke. Available in Cool White (approx 5000+K) Driver: Electronic driver. Available in 120V input. -40 F. starting temperature. All drivers are Underwriters Laboratories recognized. Finish: Super TGIC thermoset polyester powder coat paint, 2.5 mil nominal thickness, applied over a titanated zirconium conversion coating; 2500 hour salt spray test endurance rating. Standard colors are Black (BL), Dark Bronze (DB), and Verde Green (GR). Distribution: Specify SP for spot distribution; specify NF for narrow flood distribution. ORDERING INFORMATION Mode Wattage / Max Amps EL731SP / 6LED W /.07 EL732NF / 6LED W /.07 Finish BL - Black DB - Dark Bronze GR - Verde Green 5B" (130.2 mm) 4M" (109.5 mm) 9" (228.6 mm) K" NPT 2B" (54.0 mm) 8"r. 6 Emitters LED 7.2 WattS U.S. PATENT D424,731 Listings and Ratings UL cul IP66 Rated 25C Ambient 1 Suitable for wet locations KIM LIGHTING RESERVES THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT NOTICE.

2 Page: 2 of 6 Options Lens Accessories (See right) HL73 - Hex Cell Louver: Constructed of hex cell aluminum louvers providing 45 cutoff, mounted in a circular frame, finished in baked high-heat flat black. Can be used in combination with colored lenses. Inserts behind lens into lens gasket. Cannot be used in combination with SL spread or PL prismatic lenses. HL73 Hex Cell Louver PL73 - Prismatic Lens: Softens lamp distribution and flattens beam spread. Best with flood lamps. Inserts behind lens into lens gasket. Cannot be used in combination with HL73 louver. PL73 Prismatic Lens SL73 - Spread Lens: Creates an oval beam pattern, more narrow in one beam axis. Best with spot lamps. Inserts behind lens into lens gasket. Cannot be used in combination with HL73 louver. SL73 Spread Lens

3 Page: 3 of 6 Options Aluminum Adjustable Glare Shield Finish AGS73BL Black AGS73DB Dark Bronze AGS73GR Verde Green Spun aluminum shield with 45 cut and drain hole. Includes die-cast low copper alloy (< 0.6%) aluminum lens ring. The shield is rotatable 360. Replaces standard lens ring/hood on fixture. 5A" mm 4F" DIA mm Aluminum Full Glare Shield Finish FGS73BL Black FGS73DB Dark Bronze FGS73GR Verde Green Spun aluminum shield with drain hole. Includes die-cast aluminum lens ring. Replaces standard lens ring/hood on fixture. 4A" DIA. (103.2 mm) 6D" (168.3 mm) 31.5 cutoff Debris Screen Finish DS73 Black Stainless steel wire screen welded to flange, and held in place with spring clips. Screen inserts inside full glare shield only. All debris screens are black iridite colored. Photocell Sensor A-PC2 Built-in photocell sensor is mounted in the center of the LED board. Consult factory for environment limitations and operation settings. NOTE: Available for LED models EL731/EL732.

4 Page: 4 of 6 ing Options Landscape Light Post by Engineered Products Co. EP17 PVC fixture molded in black with K" NPT mount is corrosion free and UV resistant. Replaces EMT, conduit connectors and weatherproof boxes. 100% shatter resistant against denting and cracking. Angled bottom to eliminate cable congestion. 17K" post length NOTE: EP17 should be used with a UL listed fixture and grounding means (i.e., third wire) suitable for use in wet locations. x = required depth of conduit per local codes. K" NPT x 2J" (57.2 mm) Rigid Conduit (by others) 3J" DIA. (82.6 mm) 1" (25.4 mm) 3K" (88.9 mm) 5" 5" (127.0 mm) 17K" (444.5 mm) Architectural Junction Box Finish JB1/BL Black JB1/DB Dark Bronze JB1/GR Verde Green Die-cast aluminum with fixture mount. Internal set screw provided for locking position. Two in bottom, 17 cu in. internal volume. Super TGIC powder coat paint over clear anodizing and titanated zirconium conversion coating. Application Notes Elevates Accent Lights above ground cover to prevent foliage from blocking the light. Elevates Path Lights above ground cover to achieve a greater light throw. 4L" CAUTION: Junction box must be installed high enough to avoid contact with soil or standing water. 3" DIA. (76 mm) (121 mm) Portable Spear J-25N Cast iron with fixture mount. Hot dip galvanized finish. 5.5 cu in. splice compartment. (SJTW-A) 3 wire cord and plug. 9' cord length 3K" DIA. (88.9 mm) 2J" (57.2 mm) 6E" (174.6 mm)

5 Page: 5 of 6 ing Options Brass In-grade Architectural Junction Box JBR-2 JBR-3 JBR-21 JBR-24 Die-cast brass with fixture mount and die-cast cover. Internal set screw provided for locking position. 18 cu in. internal volume. JBR-2 (2) K" NPT in bottom JBR-3 (2) L" NPT in bottom JBR-21 (2) K" NPT in sides, (2) K" NPT in bottom JBR-24 (4) K" NPT in sides, (2) K" NPT in bottom All side taps provided with plugs. 25 Year Limited Warranty: Solid brass junction boxes are warranted for 25 years, from date of sale, against manufacturing defects and failure due to corrosion. Application Notes Creates a flush-mounted appearance. May be cast in concrete for increased stability. CAUTION: stem and swivel must not contact soil or standing water. Provide drainage away from junction box. 3L" DIA. (95.3 mm) K" (12.7 mm) 3" (76.2 mm) Brass In-grade Staked Junction Box JBR30 Brass In-grade Staked Junction Box with Cord JBR32 JBR30 BRASS IN-GRADE STAKED JUNCTION BOX Die-cast brass with fixture mount and die-cast cover. Internal set screw provided for locking position. 18 cu in. internal volume. (2) K" NPT in bottom with (2) 19" long brass stakes JBR32 BRASS IN-GRADE STAKED JUNCTION BOX WITH CORD Die-cast brass with fixture mount and die-cast cover. Internal set screw provided for locking position. 18 cu in. internal volume. (SJTW-A) 3 wire cord and plug. (2) 19" long brass stakes with 9' cord 25 Year Limited Warranty: Solid brass junction boxes are warranted for 25 years, from date of sale, against manufacturing defects and failure due to corrosion. Application Notes Creates a flush-mounted appearance. May be cast in concrete for increased stability. CAUTION: stem and swivel must not contact soil or standing water. Provide drainage away from junction box. 3L" DIA. (95.3 mm) 19C" (492.1 mm) 18D" (473.1 mm) 3K" (88.9 mm) 1" (25.4 mm)

6 Page: 6 of 6 ing Options Stanchion Finish SM18/BL Black SM18/DB Dark Bronze SM18/GR Verde Green 3" O.D. by.188" wall cast aluminum with fixture mount and hand hole with flush cover. Internal set screw fixture lock accessible through hand hole. Internal ground lug supplied with installed lead. Super TGIC powder coat paint over clear anodizing and titanated zirconium conversion coating. 6" Min. (152.4 mm) 12" Max. (304.8 mm) 3" DIA. (76.2 mm) 18" (457.2 mm) Optional Concrete (by others) Rigid Conduit (by others) Surface Finish J-27N/BL Black J-27N/DB Dark Bronze J-27N/GR Verde Green Cast aluminum with fixture mount. Internal set screw provided for locking position. 5 cu in. internal volume. Super TGIC powder coat paint over clear anodizing and titanated zirconium conversion coating. 4K" (114.3 mm) 2F" (55.6 mm) 1L" (44.5 mm) Architectural Wall Finish JW/BL Black JW/DB Dark Bronze JW/GR Verde Green Die-cast aluminum with fixture mount. Internal set screw provided for locking position. Canopy attaches to stainless steel wall plate for mounting to any standard electrical outlet box. Super TGIC powder coat paint over titanated zirconium conversion coating. J-Box in wall (by others) 5" DIA. (127.0 mm)

Ravenna TM. Fixture Options: Ordered Separately from Fixture. See page 2. Mounting Options: Ordered Separately from Fixture.

Ravenna TM. Fixture Options: Ordered Separately from Fixture. See page 2. Mounting Options: Ordered Separately from Fixture. Catalog number: and Finish Options: See page 2 ing Options: See pages 3-5 Approvals: Date: Page: 1 of 5 Specifications Lamp Housing: Die-cast low copper aluminum with diecast cover, stainless steel fasteners,