Carclo-Optics BJB connection system for COB LEDs

Transcription

1 Carclo-Optics BJB connection system for COB LEDs

2 Part Number: Use with Optics: 10755, 10756, 10757, 10758, Title: Function: Ø30mm Optics Holder for Ø40mm BJB Bases This holder has been developed to allow the use of Carclo s standard range of Ø30mm optics with the range of Ø40mm CoB (Chip on Board) bases from BJB. unique Compact, clip together optic assembly. Overall footprint:- 40mm diameter, Height 19mm (including BJB connector base) Solderless system with push-in electrical connectors Variety of optical beam shapes (Narrow, Medium, Wide & Elliptical) and optic finishes (Clear, Frosted & Ripple) Beam angle range covered:- 18 to 44 deg.

3 Optic Gate Spruce Gate Location Ribs ssembly The Ø30mm Optic is inserted in to the holder from the underside, ensuring the gate sprue is located between the full length internal ribs. The optic should be pushed in firmly until all 4 lens retaining springs locate on the underside of the flange. The holder is fitted to the BJB Base using a bayonet fixing system. Locate the holder s lugs into the slots in the BJB Base. Press and rotate in a clockwise direction until locking springs click. Disassembly The optic can be removed from the holder, prior to assembly to the BJB Base. This can be achieved by depressing each of the lens retaining springs until the lens is released. Please Note: The holder has been designed to be a single use component, and as such, cannot be removed from the BJB Base without damaged the locking springs. If it is necessary to remove the holder from the base, a new replacement holder should be substituted. Lens Retaining Springs

4 BJB Base Compatibility Table BJB Base Pt No CITIZEN CREE EDISON LEXTR OSRM PROLIGHT TRIDONIC CL-L020/022 HM05/ CX 15xx NIMBUS 500/1000 PCB 022 LES NIMBUS 1500 Soleriq S13 & X CX 13xx Soleriq P Soleriq P9 General Instruction - Optics & Holders Handling instructions Do not handle or install lenses without wearing gloves, skin oils may damage the lens or the light transmission. Clean lenses with a mild soap and water and dry with a clean soft cloth. Do not use any commercial solvents on lenses. Mount holders with low Odour epoxies and allow time for them to out gas to stop lenses fogging.

5 Optical Data Example results acheived using the Cree XLamp CX 1310 White For more information and results using a range of LEDs please refer to

6 B REV. DESCRIPTION DTE PPROVED D1 INITIL DESIGN CONCEPT. P.SUTTON 30 JUN'14 D2 REFER DCN P.SUTTON 28 JUL'14 D3 REFER DCN P.SUTTON 23 SEPT'14 C D E 27.3 F G SECTION - H I J K L 40 CUSTOMER DRWING SHEET 2 OF 2 M N NOTES: 1 - MTERIL: POLYCRBONTE 2 - GENERL DRFT ITEM ( ) IS REFERENCE DIMENSION 103 Buckingham venue SL1 4PF, UK. Tel: +44(0) Fax: +44(0) sales@carclo-optics.com THIRD NGLE PROJECTION Title Drawn by GENERL TOLERNCES UNLESS OTHERWISE STTED LINER NGULR HOLDER, 30MM, BJB MOUNTING BSE P.SUTTON Customer CRCLO Optics CONFIDENTIL: UNUTHORISED COPYING, DISCUSSION & DISTRIBUTION PROHIBITED CD File Part N DIMENSION IN mm 12875_D Scale 2:1 Format Size 3 Drw N

7 B C D 40 E F G H SECTION - I J K L CUSTOMER DRWING SHEET 1 OF 1 M Title 30mm Lens & Holder on BJB 40mm Base N 103 Buckingham venue SL1 4PF, UK. Tel: +44(0) Fax: +44(0) sales@carclo-optics.com THIRD NGLE PROJECTION Drawn by GENERL TOLERNCES UNLESS OTHERWISE STTED LINER NGULR P.SUTTON Customer CRCLO Optics CONFIDENTIL: UNUTHORISED COPYING, DISCUSSION & DISTRIBUTION PROHIBITED Scale 2:1 DIMENSION IN mm Format Size 3 CD File Osram_30mm_ssembly Part N Drw N