MEDIUM 3 AA - STANDARD SXX XXX
|
|
|
- Kory Benson
- 5 years ago
- Views:
Transcription
1 NOTES: UNLESS OTHERWISE SPECIFIED. CORNERS DRWN SHRP TO BE R.005 MXIMUM. 2. EXTERIOR SURFCE TEXTURE TO BE EDM FINISH. EQUIVLENT TO MT-020. TEXTURE ON ENCLOSURE WILL VRY FROM TIME TO TIME S THE TOOL WERS ND IT BECOMES NESSESRY TO REPPLY. 3. INTERIOR SURFCE TEXTURE TO BE: NONE. 4. LL INSIDE RDII.00R. UNLESS OTHERWISE SPECIFIED. 5. LL EXTERNL DIMENSIONS FFECTED THE DRFT PPLY T THE LRGE END OF THE FETURE, ND LL INTERNL FETURES FFECTED THE DRFT PPLY T THE SMLL END OF THE FETURE UNLESS OTHERWISE SPECIFIED. 6. DEGREE DRFT IN THE DIRECTION OF PULL IS PERMISSIBLE UNLESS OTHERWISED SPECIFIED. 7. MTERIL / COLOR: BS PLSTIC IS STNDRD IN BLCK OR WHITE. CUSTOM MTERILS ND COLORS RE VILBLE UPON REQUEST FOR QUOTE. LTERNTE RESINS HVE DIFFERENT SHRINK RTES, ND WILL EFFECT DIMENSIONS. 8. PCB S RE RECOMMENDTIONS ONLY. FINL S ND VERIFICTION OF ITS FIT RE THE SOLE RESPONSIBILITY OF ECH CUSTOMER. 9. SSEMBLY SCREWS FOR THE ENCLOSURE INCLUDED. MOUNTING SCREWS FOR THE WLL SOLD SEPERTELY. 0. THIS DRWING IS BSED ON SOLID MODEL, ND IS FURTHER DEFINED THE SOLID MODEL FILE.. LLOWBLE FLSH: 0.00 MX. 2. LL EJECTOR PIN MRKS TO BE WITHIN 0.00" OF FLUSH, PROTRUDING OR BELOW FLUSH. 3. TRIM GTE WITHIN 0.030" OF FLUSH. R E V I S I O N REV. DRWN ECO No DESCRIPTION DTE PPROVED DR XXX PRELIMINRY RELESE 47226(x) CONFIGURTIONS [Blank] -W COVER BSE HTCH WLL PLTE PCB * #4 HiLo SCREW.375" 4 SCLE ITEM -SINGL-CONTCT-POS -SINGL-CONTCT-NEG SCREW-DRYWLLX750 -BTTERY PCB WLL HTCH COVER BSE NO4_HI-LO FILE NME CC-POS-5223 SPRING STEEL CC-NEG-520 SPRING STEEL DRYWLL SCREW - REFERENCE CUSTOMER SUPPLIED "" BTTERY REFERENCE PCB - REFERENCE.062" THICK WLL - STNDRD BS HTCH - STNDRD BS COVER - STNDRD BS BSE - STNDRD BS SSEMBLY & PCB No4 HiLo x 3/8" DESCRIPTION MTERIL BILL OF MTERILS SOLD SEPERTELY SOLD SEPERTELY DRYWLL SCREW CUSTOMER SUPPLIED CUSTOMER SUPPLIED BLCK or WHITE BLCK or WHITE BLCK or WHITE BLCK or WHITE 4 INCLUDED COLOR QTY. THIRD NGLE PROJECTION DO NOT SCLE DRWING NOTICE: THE INFORMTION ND DT CONTINED HEREIN IS CONSIDERED PROPRIETRY TO LLTEC INTEGRTED MFG INC & SHLL REMIN THE EXCLUSIVE PROPERTY OF LLTEC INTEGRTED MFG INC THE HOLDER WILL SSUME CUSTODY ND CONTROL THT THIS DOCUMENT WILL NOT BE COPIED, REPRODUCED, OR DISCLOSED WITHOUT THE EXPRESS WRITTEN CONSENT OF LLTEC INTEGRTED MFG INC POSSESSION OF THIS DOCUMENT DOES NOT CONSTITUTE GRNT TO MNUFCTURE NY ITEMS. 206 TOLERNCES: UNLESS OTHERWISE SPECIFIED DIMENSIONS RE IN U.S. INCHES. NEW GE ENCLOSURES PPROVL SCLE DRWN DTE S NOTED MEDIUM 3 - STNDRD 4330 Santa Fe Road San Luis Obispo, C DRWING NME 47226_R OF 8
2 47226 SSEMBLY SCLE SECTION X-X SECTION Y-Y.675 TOLERNCES: UNLESS OTHERWISE SPECIFIED DIMENSIONS RE IN U.S. INCHES. SCLE NEW GE ENCLOSURES PPROVL DRWN DTE S NOTED MEDIUM 3 - STNDRD 4330 Santa Fe Road San Luis Obispo, C DRWING NME 47226_R 2 OF 8
3 47226 COVER SCLE TOLERNCES: UNLESS OTHERWISE SPECIFIED DIMENSIONS RE IN U.S. INCHES. SCLE NEW GE ENCLOSURES PPROVL DRWN DTE S NOTED MEDIUM 3 - STNDRD 4330 Santa Fe Road San Luis Obispo, C DRWING NME 47226_R 3 OF 8
4 47226 BSE SCLE TOLERNCES: UNLESS OTHERWISE SPECIFIED DIMENSIONS RE IN U.S. INCHES. SCLE NEW GE ENCLOSURES PPROVL DRWN DTE S NOTED MEDIUM 3 - STNDRD 4330 Santa Fe Road San Luis Obispo, C DRWING NME 47226_R 4 OF 8
5 47226 HTCH SCLE TOLERNCES: UNLESS OTHERWISE SPECIFIED DIMENSIONS RE IN U.S. INCHES. SCLE NEW GE ENCLOSURES PPROVL DRWN DTE S NOTED MEDIUM 3 - STNDRD 4330 Santa Fe Road San Luis Obispo, C DRWING NME 47226_R 5 OF 8
6 47226 WLL X SCLE SECTION X-X X TOLERNCES: UNLESS OTHERWISE SPECIFIED DIMENSIONS RE IN U.S. INCHES. SCLE NEW GE ENCLOSURES PPROVL DRWN DTE S NOTED MEDIUM 3 - STNDRD 4330 Santa Fe Road San Luis Obispo, C DRWING NME 47226_R 6 OF 8
7 47226 PCB SCLE TOLERNCES: UNLESS OTHERWISE SPECIFIED DIMENSIONS RE IN U.S. INCHES. SCLE NEW GE ENCLOSURES PPROVL DRWN DTE S NOTED MEDIUM 3 - STNDRD 4330 Santa Fe Road San Luis Obispo, C DRWING NME 47226_R 7 OF 8
8 nd OPERTION NEW GE ENCLOSURES DELIVERS YOUR ENCLOSURE MRKET-REDY WITH IN-HOUSE CNC MCHINING, PD PRINTING, SSEMBLY, ND FULFILLEMENT. LL SURFCES ND RES RE VILBLE FOR CNC LTERTION NEW GE ENCLOSURES CLL (805) FOR PRICING ND SCHEDULE. THE INSIDE RDIUS OF NY MCHINED FETURES SHOULD BE NO SMLLER THN.03" SCLE.000 COVER - BS, BLCK STEP NO DESCRIPTION CUTTER FIXTURE ORIENTTION PROGRM -C-C - T2 =.062" EM XXX - o00 2-C-C2 - T2 =.062" EM XXX - o002 COVER - BS, BLCK STEP TYPE FIXTURE INK COLOR CLICHE DESCRIPTION CLICHE No. 4-C-P PD PRINT XXX WHITE LOGO ND LBELS CL00 R TOLERNCES: UNLESS OTHERWISE SPECIFIED DIMENSIONS RE IN U.S. INCHES. SCLE NEW GE ENCLOSURES PPROVL DRWN DTE S NOTED MEDIUM 3 - STNDRD 4330 Santa Fe Road San Luis Obispo, C DRWING NME 47226_R 8 OF 8
1.0. R E V I S I O N REV. DRAWN BY ECO No DESCRIPTION DATE APPROVED BILL OF MATERIALS
NOTES: UNLESS OTHERWISE SPECIFIED. CORNERS DRWN SHRP TO BE R.005 MXIMUM. 2. EXTERIOR SURFCE TEXTURE TO BE EQUIVLENT TO MT-007. TEXTURE ON ENCLOSURE WILL VRY FROM TIME TO TIME S THE TOOL WERS ND IT BECOMES
STANDARD THIRD ANGLE PROJECTION DO NOT SCALE DRAWING
NOTES: UNLESS OTHERWISE SPECIFIED. CORNERS DRWN SHRP TO BE R.005 MXIMUM. 2. EXTERIOR SURFCE TEXTURE TO BE LIGHT EDM FINISH. EQUIVLENT TO MT-020. 3. INTERIOR SURFCE TEXTURE TO BE: NONE 4. LL INSIDE RDII.00R.
From Off-The-Shelf to Market-Ready New Age Enclosures is your Single Source Solution. Let us quote modifiying our Stock Enclosures to meet your
From Off-The-Shelf to Market-Ready New ge Enclosures is your Single Source Solution. Let us quote modifiying our Stock Enclosures to meet your end-use. visit newageenclosures.com/services or call 855-4N-ENCL
NOTE 12 USB OPENING 'U' & 'UB' SERIES ONLY USB CAP NOT SHOWN NOTE 12 USB OPENING U & UB SERIES ONLY THIRD ANGLE PROJECTION DO NOT SCALE DRAWING
P80804(x) CONFIGURTIONS -S -U -UB -UBC -UBB -B -C P80804 COVER P80804 COVER w/usb OPENING P80804 COVER w/usb & BUTTON HOLE P80804 BSE P80804 BSE w/usb P80804 BUTTON P20603 CP 'UB' SERIES ONLY R E V I S
THIRD ANGLE PROJECTION DO NOT SCALE DRAWING
NOTES: UNLESS OTHERWISE SECIFIED. CORNERS DRWN SHR TO BE R.005 MIMUM. 2. ETERIOR SURFCE TETURE TO BE LIGHT EDM FINISH. EQUIVELNT TO MT-020. 3. INTERIOR SURFCE TETURE TO BE: NONE. 4. LL INSIDE RDII.00R.
NOTE: UNLESS OTHERWISE SPECIFIED. 1. SEE SHIPPING INSTRUCTIONS FOR FINAL PACKAGING
ISION DESCRIPTION DTE EDITED BY ECO# PRODUCTION RELESE, DERIVED FROM 560395 09//04 00666. SEE SHIPPING INSTRUCTIONS FOR FINL PCKGING ITEM NO. PRT NUMBER DESCRIPTION QTY. 5450 HDS-7X LIFT SUPERSTRUCTURE
NOTE: UNLESS OTHERWISE SPECIFIED. 1. SEE SHIPPING INSTRUCTIONS FOR FINAL PACKAGING
ISION DESCRIPTION DTE EDITED BY ECO# PRODUCTION RELESE, DERIVED FROM 560393 09//04 00666. SEE SHIPPING INSTRUCTIONS FOR FINL PCKGING ITEM NO. PRT NUMBER DESCRIPTION QTY. 545007 HDS-7 LIFT SUPERSTRUCTURE
XPR10A. BendPakSKU
Ser vi cemanual S er vi cepar t s& Di agr ams T hi sgui dei sat r oubl es hoot i ngr ef er enceus edf ormai nt ai ni ngands er vi ci ngyour BendPakpr oduct.i tpr ovi descompr ehens i vei nf or mat i ononi
RELEASE STATUS Production REAR ISO FRONT ISO SHIPPING WEIGHT: 220 LBS MATERIAL: ENCLOSURE - 44U X 30W X 42D S-SERIES W/ RACK HYGIENE
ESE STTUS RER ISO FRONT ISO SHIPPING WEIGHT: 220 LBS 03/04/15 Rrora REPLCE PDUBRCKTW WITH PDUBRCKTWPMT (WIDER PDU BRCKET) ECO-077724 REV REV. DTE REV'D BY CURRENT REVISION DESCRIPTION ECN OR EPR NUMBER
DETAIL SPECIFICATION SHEET CONNECTORS, ELECTRICAL, PRINTED WIRING BOARD RECEPTACLE, CARD INSERTION, CONTACT SPACING (.156), TYPES A AND AD
IN-POUND MIL-DTL-1097/1 w/mendment 1 1 uly 011 SUPERSEDING MIL-DTL-1097/1 7 pril 010 DETIL SPEIFITION SEET ONNETORS, ELETRIL, PRINTED WIRING ORD REEPTLE, RD INSERTION, ONTT SPING (.156), TYPES ND D This
(1.50) .035 MIN HOLE AND SLOT MIN
X.096 THRU ISION HISTORY DESCRIPTION DTE PPROVED DDED DETIL WITH PINOUT 6/7/07 KMW DDED SENSOR ORIGINS PG. 8//07 KMW NOTE : THIS DRWING IS NOT TO E USED FOR MNUFCTURE OR INSPTION NOTE : DRWINGS NOT OWN
Royal RVHV Retrofit Kit
Optipy BV/RC/CC into Royl Vending Mchine This document contins informtion for instlling nd configuring the JCM Optipy DBV-01 Bill Vlidtor, RC-10 Bill Recycler nd A-66 Coin Chnger into Royl RVHV 768-12
Dixie Narco Retrofit Kit
PERSONAL NOTES AND COMMENT AREA Write ny pertinent notes or comments regrding your prticulr instlltion here. Optipy BV/RC/CC into Pepsi Vending Mchine This document contins informtion for instlling nd
Low-Voltage Controls and Distribution
Commnding nd Signling evices Pushbuttons nd Indictor Lights Consoles Switches Signling Columns Reference Mnul April 2009 Low-Voltge Controls nd istribution Commnding nd Signling evices 4 Introduction
Pre-Drilled Standard Support Angles
Pre-Drilled ngles Standard Support Pre-Drilled Standard Support ngles UDB-750200 Series dd for luminum. UNEQUL LEGS MTERIL VILBILITY DETERMINES ONE OR TWO PIECE NGLE CONSTRUCTION. This Pre-Drilled Unequal
prisms Prisms Specifications Catalogue number BK7 Wedge, Beam Deviation, deg
Cotings Wedge Steer bems in opticl systems Cn be used in pirs for continuous ngulr djustment T Hving selected n pproprite wedge, it is esy to crete precise bem devition without ffecting other bem prmeters.
SHEET 1 OF 14
Electronic Master PRINTED COPIES RE UNCONTROLLED Rosemount Proprietary REVISIONS REV DESCRIPTION CHG.NO. PP'D DTE REMOVED SNP-RING HOLDER DSI1002683 MH 06/24/09 NOTES: 1. 2. 3. 4. 5. 6. ROSEMOUNT INC.
REV A NOMINAL LINE + 1 % OF NOMINAL OUTPUT VOLTAGE MEASURED AT O/P CONNECTOR
PROPRIETRY INFORMTION: PROPRIETRY OF GLOBTEK, INC. NY REPRODUCTION, DISCLOSURE OR USE OF THIS DRWING, IN WHOLE OR IN PRT, IS HEREBY PROHIBITED EXCEPT S SPECIFIED IN WRITING BY GLOBTEK, INC. REV REVISION
RELEASE STATUS Production FRONT ISO SHIPPING WEIGHT: 340 LBS MATERIAL: CONFIG - 44U X 24W X 42D S-SERIES W/ RACK HYGIENE REAR DOOR HIGH FLOW
RELESE STTUS Production FRONT DOOR HIGH FLOW RER DOOR HIGH FLOW DIVIDER PNEL RER ISO FRONT ISO SHIPPING WEIGHT: 340 LBS Rrora REPLCE PDUBRCKTW WITH PDUBRCKTWPMT (WIDER PDU BRCKET) ECO-077724 REV REV. DTE
DEMO BOARD QUICK START GUIDE DC437 LOW DROPOUT LINEAR REGULATOR LT1964 DESCRIPTION QUICK START PROCEDURE
DESCRIPTION Demonstration circuit DC47 is a low noise negative micropower voltage regulator using the LT964 low dropout linear regulator, which comes in a tiny 5-Pin SOT- package. The DC47 has an input
NET-ACCESS S TYPE CABINET 800mm WIDE X 1070mm DEEP FAMILY 12V305TL-DC KNOCK-OUTS FOR POU POWER CORD TOP CAP FRONT DOOR REAR SPLIT DOORS
THIS COPY IS PROVIDED ON RESTRICTED SIS ND IS NOT TO E USED IN NY WY DETRIMENTL TO THE INTERESTS OF PNDUIT CORP. SIDE PNEL TOP CP KNOCK-OUTS FOR POU POWER CORD SIDE PNEL RER S. VISIT OUR ON-LINE CTLOG
NET-ACCESS S TYPE CABINET 700mm WIDE X 1200mm DEEP FAMILY 12V305TK-DC KNOCK-OUTS FOR POU POWER CORD TOP CAP REAR SPLIT DOORS FRONT DOOR
THIS COPY IS PROVIDED ON RESTRICTED SIS ND IS NOT TO E USED IN NY WY DETRIMENTL TO THE INTERESTS OF PNDUIT CORP. SIDE PNEL TOP CP KNOCK-OUTS FOR POU POWER CORD SIDE PNEL RER S. VISIT OUR ON-LINE CTLOG
Metal Element Current Sense Resistor
Metl Element Current Sense Resistor UR Series Robust metl strip ble to withstnd high temperture nd high current. ow TCR nd Inductnce Resistnce Rnge from m to 15 m Power rtings from 1W to 3W in 1206, 2010
NET-ACCESS S TYPE VED READY CABINET NO CASTERS 800mm WIDE X 1200mm DEEP FAMILY 12V352CJ-DC VED TOP CAP SOLID REAR FRONT SINGLE HINGE SPLIT SIDE PANEL
SPLIT SIDE VED TOP CP SINGLE HINGE SPLIT SIDE SOLID. VISIT OUR ON-LINE CTLOG T WWW.PNDUIT.COM FOR LIST OF CURRENT PRTS PPLICLE FOR USE WITH THIS PRODUCT.. PRIMRY DIMENSIONS RE IN MILLIMETERS. 3. INDEPENDENT
NetBackup 5200 Release 1.1 Quick Installation Guide
NetBckup 5200 Relese 1.1 Quick Instlltion Guide Revision: 01 Dte: 2010-08-30 Environment Check Before Instlltion You cn instll the NetBckup 5200 pplince in stndrd 19-inch cbinet (with n AC distribution
RELEASE STATUS Production FRONT ISO SHIPPING WEIGHT: 370 LBS MATERIAL: CONFIG - 44U X 30W X 42D S-SERIES W/ RACK HYGIENE REAR DOOR HIGH FLOW
RELESE STTUS Production FRONT DOOR HIGH FLOW RER DOOR HIGH FLOW DIVIDER PNEL RER ISO FRONT ISO SHIPPING WEIGHT: 370 LBS Rrora REPLCE PDUBRCKTW WITH PDUBRCKTWPMT (WIDER PDU BRCKET) ECO-077724 REV REV. DTE
CROSS REFERENCE INDEX
United Technologies THIS DOCUMENT ND THE INFORMTION CO NTINED THEREIN IS PROPRIETRY TO CRRIER CORPORTION ND SHLL NOT BE USED OR DISCLOSED TO OTHERS, IN WHOLE OR IN PRT, WITHOUT THE WRITTEN UTHORIZTION
(n1.43 [36]) (n1.31 [33]) (0.69 [18])
![(n1.43 [36]) (n1.31 [33]) (0.69 [18])](/thumbs/81/83880221.jpg "(n1.43 [36]) (n1.31 [33]) (0.69 [18])")
REV PPROVED INITIL RELESE //6 MP D D (n. [6]) (n. []) (.8 [8]) (0.69 [8]) NEOPRENE WSHER /8-8 UNEF- THRED SUPPLIER PRINT EPTNE: [ ] ccept drawing/specification: No changes needed: [ ] This part is RoHS
REVISIONS NOTICE: THE INFORMATION AND DESIGN CONTAINED HEREIN IS THE PROPERTY OF TRANSTECTOR SYSTEMS. WHO RESERVES ALL RIGHTS THERETO
THIS DRWING HS BEEN GENERTED ND IS MINTINED BY CD SYSTEM. CHNGES SHLL ONLY BE INCORPORTED S DIRECTED BY THE DESIGN CTIVITY. REVISIONS LTR DESCRIPTION ECO NUM. DTE PPROVED D DD 48VDC PROTECTION MODULE 7757
THIS COPY IS PROVIDED ON A RESTRICTED BASIS AND IS NOT TO BE USED IN ANY WAY DETRIMENTAL TO THE INTERESTS OF PANDUIT CORP.
00 2 THIS COPY IS PROVIDED ON RESTRICTED SIS ND IS NOT TO E USED IN NY WY DETRIMENTL TO THE INTERESTS OF PNDUIT CORP. SIDE PNEL 0-3-4 PS 8-29-2 DP TOP CP RELESED TO PRODUCTION KNOCK-OUTS FOR PDU POWER
A Studco Innovation. Architectural Finishings
Architecturl Finishings A Studco Innovtion Clen Lines, No Architrve Custom Shdowline EZ Concept Architecturl Finishing Systems is complete solution for chieving the ultimte clen line interior finish for
MLH REVISIONS NOTICE: THE INFORMATION AND DESIGN CONTAINED HEREIN IS THE PROPERTY OF TRANSTECTOR SYSTEMS. WHO RESERVES ALL RIGHTS THERETO
THIS DRWING HS BEEN GENERTED ND IS MINTINED BY CD SYSTEM. CHNGES SHLL ONLY BE INCORPORTED S DIRECTED BY THE DESIGN CTIVITY. REVISIONS LTR DESCRIPTION ECO NUM. DTE PPROVED C UPDTED FORMT DD1727 1/31/08
THIS COPY IS PROVIDED ON A RESTRICTED BASIS AND IS NOT TO BE USED IN ANY WAY DETRIMENTAL TO THE INTERESTS OF PANDUIT CORP.
00 THIS COPY IS PROVIDED ON RESTRICTED SIS ND IS NOT TO E USED IN NY WY DETRIMENTL TO THE INTERESTS OF PNDUIT CORP. SIDE PNEL 0-3-4 PS 8-9- DP TOP CP RELESED TO PRODUCTION KNOCK-OUTS FOR PDU POWER CORD
Sage CRM 2018 R1 Software Requirements and Mobile Features. Updated: May 2018
Sge CRM 2018 R1 Softwre Requirements nd Mobile Fetures Updted: My 2018 2018, The Sge Group plc or its licensors. Sge, Sge logos, nd Sge product nd service nmes mentioned herein re the trdemrks of The Sge
NET-ACCESS S TYPE CABINET 800mm WIDE X 1200mm DEEP FAMILY 12V305TM-DC KNOCK-OUTS FOR POU POWER CORD TOP CAP REAR SPLIT DOORS FRONT DOOR
THIS COPY IS PROVIDED ON RESTRICTED SIS ND IS NOT TO E USED IN NY WY DETRIMENTL TO THE INTERESTS OF PNDUIT CORP. DOOR SIDE PNEL TOP CP KNOCK-OUTS FOR POU POWER CORD SIDE PNEL RER SPLIT DOORS. VISIT OUR
12V305TM-DC DRAWN BY DATE CHK SCALE SIZE
THIS COPY IS PROVIDED ON RESTRICTED SIS ND IS NOT TO E USED IN NY WY DETRIMENTL TO THE INTERESTS OF PNDUIT CORP. TOP CP SIDE PNEL KNOCK-OUTS FOR PDU POWER CORD PERFORTED SINGLE HINGE SIDE PNEL RER PERFORTED
ELUM TM Series Right Angle Illuminated Latching Pushbutton
LED FREE COMPTIBLE OPTION ELUM TM Series Right ngle Illuminated Latching Features/Benefits SPDT (N.O. & N.C.) Low height above PCB Reliable self-cleaning contact Surface-mount or thru-hole PCB Standard
Welch Allyn CardioPerfect Workstation Installation Guide
Welch Allyn CrdioPerfect Worksttion Instlltion Guide INSTALLING CARDIOPERFECT WORKSTATION SOFTWARE & ACCESSORIES ON A SINGLE PC For softwre version 1.6.6 or lter For network instlltion, plese refer to
1500W Programmable Single Output
Fetures: Universl AC input / Full rnge Progrmmle output Voltge (0% ~ 105%) Progrmmle output Current (0% ~ 105%) Forced current shring t prllel opertion Refer to pg. 5 for connection digrm) Constnt current
800W Programmable Single Output
Fetures: U Design Progrmmle output Voltge (0% ~ 05%) Universl AC input / Full rnge Progrmmle output Current (0% ~ 05%) Refer to pg. 5 for connection digrm) Forced current shring t prllel opertion Constnt
Sage CRM 2017 R3 Software Requirements and Mobile Features. Updated: August 2017
Sge CRM 2017 R3 Softwre Requirements nd Mobile Fetures Updted: August 2017 2017, The Sge Group plc or its licensors. Sge, Sge logos, nd Sge product nd service nmes mentioned herein re the trdemrks of The
Installation Guide AT-VTP-800
Velocity 8 Touch Pnel The Atlon -BL nd -WH re 8 touch pnels in blck nd white, respectively, for the Atlon Velocity Control System. They feture contemporry, refined styling for modern presenttion environments
1500W Programmable Single Output 15V 24V 30V 36V 48V 60V 100A 62.5A 50A 41.7A 31.3A 25A. ±5.0% Typical adjustment by potentiometer.
500W Progrmmle Single Output Fetures: Universl AC input / Full rnge Progrmmle output Voltge (0% ~ 05%) Progrmmle output Current (0% ~ 05%) Forced current shring t prllel opertion Constnt current limit
Multi-position printed circuit termination blocks for through hole reflow applications
Multi-position printed circuit termintion blocks for through hole reflow pplictions With the modern SMT solder technology, proven housing profiles from the printed circuit terminl block rnge from Phoenix
POWER COMBICON spring-cage connector 7.62 mm pitch SPC 5/...-ST(F)-7,62
spring-cge connector SPC 5/...-ST(F)- Especilly in the high current rnge, the following is true for conductor connection: Time is money. The new spring-cge plug SPC 5 sves both, s due to the quick spring-cge
PRISMS. Don t see exactly what you are looking for? CVI Laser Optics specializes in prototype to volume production manufacturing!
PRISMS Mirrors CVI Lser Optics mnufctures lrge selection of high qulity prisms for use in mny pplictions including diverse industril nd scientific uses, lser trcking nd lignment, spectroscopy, nd militry
MLH REVISIONS NOTICE: THE INFORMATION AND DESIGN CONTAINED HEREIN IS THE PROPERTY OF TRANSTECTOR SYSTEMS. WHO RESERVES ALL RIGHTS THERETO
THIS DRWING HS BEEN GENERTED ND IS MINTINED BY CD SYSTEM. CHNGES SHLL ONLY BE INCORPORTED S DIRECTED BY THE DESIGN CTIVITY. REVISIONS LTR DESCRIPTION ECO NUM. DTE PPROVED E UPDTE 2.3.5 9679 4/18/11 CP
Options Dedicated Bellows Dedicated Bellows For the supported models, see the table of options by model number on
Dedicted Bellows Dedicted Bellows For the supported s, see the tle of options y numer on. For the dedicted ellows dimensions, see to. Item nme chemtic digrm / mounting loction urpose/loction of use Dedicted
DS-90 Rotary Electric Encoder
bsolute Position Encoder options Copyright 2013 Netzer Precision Motion Sensors LTD, ll rights reserved. Page 1 of 18 2016 PRIL 01 DS-90 Rev 1.0 options 1.1 Table of 1. 3 1.1 Version : 1.0 pril 2016 3
ECE 468/573 Midterm 1 September 28, 2012
ECE 468/573 Midterm 1 September 28, 2012 Nme:! Purdue emil:! Plese sign the following: I ffirm tht the nswers given on this test re mine nd mine lone. I did not receive help from ny person or mteril (other
THIS COPY IS PROVIDED ON A RESTRICTED BASIS AND IS NOT TO BE USED IN ANY WAY DETRIMENTAL TO THE INTERESTS OF PANDUIT CORP.
THIS COPY IS PROVIDED ON RESTRICTED SIS ND IS NOT TO E USED IN NY WY DETRIMENTL TO THE INTERESTS OF PNDUIT CORP. SIDE PNEL 2 KNOCK-OUT FOR PDU POWER CORD PERFORTED SINGLE HINGE SIDE PNEL INTEGRL CINET
800W Programmable Single Output. 105% rated output power, Protection type: Constant current limit
Fetures: Universl AC input / Full rnge Progrmmle output Voltge (0% ~ 05%) Progrmmle output Current (0% ~ 05%) Forced current shring t prllel opertion Constnt current limit Selectle +5V / 0.5A or +9V /
Zones 1&2; 21&22. Distribution Boxes and Empty Enclosures. Empty Enclosures. BXT Series Explosion-proof Enclosures (Ex d IIB) Catalogue number logic
istriution oxes nd XT Series Explosion-proof Enclosures (Ex d II) Explosion protection to -ENELE -IE -NE n e used in Zone nd Zone Zone nd Zone lss I, Zone nd Zone lss I, ivision, Groups, Flmeproof enclosure
Engineer To Engineer Note
Engineer To Engineer Note EE-169 Technicl Notes on using Anlog Devices' DSP components nd development tools Contct our technicl support by phone: (800) ANALOG-D or e-mil: dsp.support@nlog.com Or visit
Series LJ1. Uniaxial Electric Actuator
CAT.E 90- Unixil Electric Actutor Controller Teching Box Unixil Electric Actutor Series LJ Series LJ Series LC Series LC for horizontl mounting nd brke for verticl mounting hve been dded to the high rigidity
LoRaWANTM Concentrator Card Mini PCIe LRWCCx-MPCIE-868
Dt Sheet LoRWANTM Concentrtor Crd Mini PCIe LRWCCxMPCIE868 LoRWANTM Concentrtor Crd bsed on Semtech SX30 nd SX308 Chips in Mini PCIe Form Fctor The nfuse LRWCCxMPCIE fmily of crds enble OEMs nd system
LED LED TYPE: 1 T8. UNV Universal. PTRN custom pattern* Specify continuous run length: Standard run length in even foot increments.
LED LED LED orecast 4 REC LED LED LED LED LED LED LED LED LMPING OPTIONS T GLNCE: The ORECST series by is a line of hybrid steel housing/aluminum trim rectilinear recessed continuously illuminated luminaires.
THIS COPY IS PROVIDED ON A RESTRICTED BASIS AND IS NOT TO BE USED IN ANY WAY DETRIMENTAL TO THE INTERESTS OF PANDUIT CORP.
THIS COPY IS PROVIDED ON RESTRICTED SIS ND IS NOT TO E USED IN NY WY DETRIMENTL TO THE INTERESTS OF PNDUIT CORP. SIDE PNEL KNOCK-OUT FOR PDU POWER CORD PERFORTED SINGLE HINGE SIDE PNEL INTEGRL CINET TOP
E/ECE/324/Rev.2/Add.112/Rev.3/Amend.1 E/ECE/TRANS/505/Rev.2/Add.112/Rev.3/Amend.1
6 August 2013 Agreement Concerning the Adoption of Uniform Technicl rescriptions for Wheeled Vehicles, Equipment nd rts which cn be itted nd/or be Used on Wheeled Vehicles nd the Conditions for Reciprocl
TEK-F LEX 4100B. Two-wire Loop-powered OEM TDR Level Transmitter. LEVEL. Technology Solutions
Technology Solutions TEK-F LEX 4100B Two-wire Loop-powered OEM TDR Level Trnsmitter LEVEL www.tek-trol.com Flow Level Temperture Pressure Vlves Anlyzers Accessories TekVlSys Introduction Tek-Flex 4100B
Innovative Video Intercom Kits
HFX-700m HFX-900l HFX-720ms Innovtive Video Intercom Kits HFX 700m olor Hnds Free Kit with 3.5 LD Monitor wiring digrms bsic wiring digrm HFX-700M Expnsion monitors (EX-700H or EX-700A). Must be connected
Clamping Systems. RotoClamp/DiskClamp. RotoClamp Inside. RotoClamp Outside. DiskClamp. Gewährleistung. Inhalt. RotoClamp. DiskClamp. LinClamp.
/ Clming Systems Gewährleistung Inhlt 0 Inside Outside / dvntges 1 Pneumtic clming with high forces 2 Sfety clming Stndrd If the ir suly fils then system clms 07 3 The vlues of hydrulic clming re reched
Address/Data Control. Port latch. Multiplexer
4.1 I/O PORT OPERATION As discussed in chpter 1, ll four ports of the 8051 re bi-directionl. Ech port consists of ltch (Specil Function Registers P0, P1, P2, nd P3), n output driver, nd n input buffer.
OPTICS. (b) 3 3. (d) (c) , A small piece
AQB-07-P-106 641. If the refrctive indices of crown glss for red, yellow nd violet colours re 1.5140, 1.5170 nd 1.518 respectively nd for flint glss re 1.644, 1.6499 nd 1.685 respectively, then the dispersive
Sage CRM 2017 R2 Software Requirements and Mobile Features. Revision: IMP-MAT-ENG-2017R2-2.0 Updated: August 2017
Sge CRM 2017 R2 Softwre Requirements nd Mobile Fetures Revision: IMP-MAT-ENG-2017R2-2.0 Updted: August 2017 2017, The Sge Group plc or its licensors. Sge, Sge logos, nd Sge product nd service nmes mentioned
GXR-GPS GXR-GPS-485 User Manual
GXR-GPS GXR-GPS-485 User Mnul GeoSIG Ltd, Wiesenstrsse 39, 8952 Schlieren, Switzerlnd Phone: + 41 44 810 2150, Fx: + 41 44 810 2350 info@geosig.com, www.geosig.com Pge ii Document Revision GS_GXR_GPS_User_Mnul_V05.doc
THIS COPY IS PROVIDED ON A RESTRICTED BASIS AND IS NOT TO BE USED IN ANY WAY DETRIMENTAL TO THE INTERESTS OF PANDUIT CORP.
THIS COPY IS PROVIDED ON RESTRICTED SIS ND IS NOT TO E USED IN NY WY DETRIMENTL TO THE INTERESTS OF PNDUIT CORP. TOP CP FRONT SIDE PNEL SIDE PNEL KNOCK-OUTS FOR PDU POWER CORD RER PERFORTED S. VISIT OUR
Geometry/Trig 2 Unit 3 Review Packet Answer Key
Unit 3 Review Pcket nswer Key Section I Nme the five wys to prove tht prllel lines exist. 1. If two lines re cut y trnsversl nd corresponding ngles re congruent, then the lines re prllel.. If two lines
Smaller, faster, stronger, cheaper. Compact GigE Vision cameras with unprecedented speed and uncompromised image quality.
NEW Genie Nano Cameras Smaller, faster, stronger, cheaper. Compact GigE Vision cameras with unprecedented speed and uncompromised image quality. Introducing Genie Nano, a GigE vision CMOS area scan camera
THIS COPY IS PROVIDED ON A RESTRICTED BASIS AND IS NOT TO BE USED IN ANY WAY DETRIMENTAL TO THE INTERESTS OF PANDUIT CORP.
THIS COPY IS PROVIDED ON RESTRICTED SIS ND IS NOT TO E USED IN NY WY DETRIMENTL TO THE INTERESTS OF PNDUIT CORP. SIDE PNEL DOOR 2 KNOCK-OUT FOR PDU POWER CORD SIDE PNEL INTEGRL CINET TOP CLE ROUTING SYSTEM
THIS COPY IS PROVIDED ON A RESTRICTED BASIS AND IS NOT TO BE USED IN ANY WAY DETRIMENTAL TO THE INTERESTS OF PANDUIT CORP.
THIS COPY IS PROVIDED ON RESTRICTED SIS ND IS NOT TO E USED IN NY WY DETRIMENTL TO THE INTERESTS OF PNDUIT CORP. SIDE PNEL 2 KNOCK-OUT FOR PDU POWER CORD PERFORTED SINCLE HINGE SIDE PNEL INTEGRL CINET
TEMPERATURE RATINGS: Terminal Housing: 290 C (554 F) UL94VO Housing: 115 C (239 F) UL94VO
The KO4300 Series Enclosures feature high density double level terminals making them ideal for many electronic applications. They are small to medium in size ranging from 6 to 64 terminals. There are 4
D DF DB EXT EXP. Matching specie veneer on 11/16 thick cabinet sides
Exposed Ends (EXP) D DF DB EXT EXP FL MI STR FT FTRA Mtching specie veneer on 1/2 thick cbinet sides Avilble in Crftsmn nd Pioneer lines Specify: L (Left), R (Right) or B (Both) 7/32 revel from edge of
1 Drawing 3D Objects in Adobe Illustrator
Drwing 3D Objects in Adobe Illustrtor 1 1 Drwing 3D Objects in Adobe Illustrtor This Tutoril will show you how to drw simple objects with three-dimensionl ppernce. At first we will drw rrows indicting
Simrad ES80. Software Release Note Introduction
Simrd ES80 Softwre Relese 1.3.0 Introduction This document descries the chnges introduced with the new softwre version. Product: ES80 Softwre version: 1.3.0 This softwre controls ll functionlity in the
Smaller, faster, stronger, cheaper. Compact GigE Vision cameras with unprecedented speed and uncompromised image quality.
NEW Genie Nano Cameras Smaller, faster, stronger, cheaper. Compact GigE Vision cameras with unprecedented speed and uncompromised image quality. Introducing Genie Nano, a GigE vision CMOS area scan camera
Tyvak Nanosatellite Launch Adapter System (NLAS) Mk. II User Guide. (TK-NLASUG-Rev1)
Tyvak Nanosatellite Launch dapter System (NLS) Mk. II User Guide (TK-NLSUG-Rev1) TYVK NNO-STELLITE SYSTEMS Page 1 of 18 CHNGE HISTORY LOG Effective Date Revision Description of Changes 1/16/2015 1 Initial
KRH CVM DWR CDD REVISIONS NOTICE: THE INFORMATION AND DESIGN CONTAINED HEREIN IS THE PROPERTY OF TRANSTECTOR SYSTEMS. WHO RESERVES ALL RIGHTS THERETO
THIS SPECIFICTION HS BEEN GENERTED ND IS MINTINED BY CD SYSTEM. CHNGES SHLL ONLY BE INCORPORTED S DIRECTED BY THE DESIGN CTIVITY. REVISIONS LTR DESCRIPTION ECO NUM. DTE PPROVED E UPDTE PER REDLINES 13069
THIS COPY IS PROVIDED ON A RESTRICTED BASIS AND IS NOT TO BE USED IN ANY WAY DETRIMENTAL TO THE INTERESTS OF PANDUIT CORP. REAR PERFORATED SPLIT DOOR
THIS COPY IS PROVIDED ON RESTRICTED SIS ND IS NOT TO E USED IN NY WY DETRIMENTL TO THE INTERESTS OF PNDUIT CORP. TOP CP FRONT SIDE PNEL KNOCK-OUTS FOR PDU POWER CORD SIDE PNEL RER PERFORTED. VISIT OUR
Engineer To Engineer Note
Engineer To Engineer Note EE-188 Technicl Notes on using Anlog Devices' DSP components nd development tools Contct our technicl support by phone: (800) ANALOG-D or e-mil: dsp.support@nlog.com Or visit
Max. Operating Pressure. Min. *2 Required Pilot Pres. Max. Pilot
DIRCIONL CONROLS Solenoid Controlled ilot Operted Directionl Vlves hese vlves re composed of solenoid operted pilot vlves nd pilot operted slve vlve. When solenoid is energised the pilot vlve directs the
DWR REVISIONS NOTICE: THE INFORMATION AND DESIGN CONTAINED HEREIN IS THE PROPERTY OF TRANSTECTOR SYSTEMS. WHO RESERVES ALL
THIS DRWING HS BEEN GENERTED ND IS MINTINED BY CD SYSTEM. CHNGES SHLL ONLY BE INCORPORTED S DIRECTED BY THE DESIGN CTIVITY. LTR DESCRIPTION REVISIONS ECO NUM. DTE PPROVED PRODUCTION RELESE DD34889 MLH
Carclo-Optics BJB connection system for COB LEDs
Carclo-Optics BJB connection system for COB LEDs Part Number: 12875 Use with Optics: 10755, 10756, 10757, 10758, 10759 Title: Function: Ø30mm Optics Holder for Ø40mm BJB Bases This holder has been developed
QEL 33A/35A, 98/99 Series
*24908394* 24908394 Bseplte Conversion Kit QEL 33A/35A, 98/99 Series Instlltion Instructions 1. This kit converts ll 33/35A nd 98/99 series EL devices nd fire devices uilt prior to Oct. 2014 to quiet electric
Epson Projector Content Manager Operation Guide
Epson Projector Content Mnger Opertion Guide Contents 2 Introduction to the Epson Projector Content Mnger Softwre 3 Epson Projector Content Mnger Fetures... 4 Setting Up the Softwre for the First Time
McAfee Network Security Platform
10/100/1000 Copper Active Fil-Open Bypss Kit Guide Revision E McAfee Network Security Pltform This document descries the contents nd how to instll the McAfee 10/100/1000 Copper Active Fil-Open Bypss Kit
MATH 2530: WORKSHEET 7. x 2 y dz dy dx =
MATH 253: WORKSHT 7 () Wrm-up: () Review: polr coordintes, integrls involving polr coordintes, triple Riemnn sums, triple integrls, the pplictions of triple integrls (especilly to volume), nd cylindricl
VB-7000 Series. Selection Guide. Applications. Applicable Literature. Selection Guide Contents
V-7000 Series Selection Guide Schneider Electric V-7000 Series 1/2 to 2 Globe Vlves with Schneider Electric NSR Fort M400 (V), M800 (V), nd M1500 (V) Series ctutors pplictions Schneider Electric NSR Fort
Tixeo compared to other videoconferencing solutions
compred to other videoconferencing solutions for V171026EN , unique solution on the video conferencing field Adobe Connect Web RTC Vydio for High security level, privcy Zero impct on network security policies
EasyMP Multi PC Projection Operation Guide
EsyMP Multi PC Projection Opertion Guide Contents 2 Introduction to EsyMP Multi PC Projection 5 EsyMP Multi PC Projection Fetures... 6 Connection to Vrious Devices... 6 Four-Pnel Disply... 6 Chnge Presenters
Epson iprojection Operation Guide (Windows/Mac)
Epson iprojection Opertion Guide (Windows/Mc) Contents 2 Introduction to Epson iprojection 5 Epson iprojection Fetures... 6 Connection to Vrious Devices... 6 Four-Pnel Disply... 6 Chnge Presenters nd Projection
File Manager Quick Reference Guide. June Prepared for the Mayo Clinic Enterprise Kahua Deployment
File Mnger Quick Reference Guide June 2018 Prepred for the Myo Clinic Enterprise Khu Deployment NVIGTION IN FILE MNGER To nvigte in File Mnger, users will mke use of the left pne to nvigte nd further pnes
V12 FAMILY BRAND GUIDELINES
V12 FAMILY BRAND GUIDELINES LOGO The logo is n importnt element of our visul identity. It must not be re-drwn or ltered in ny wy nd hs size nd minimum spce requirements to ensure tht it is lwys visully
McAfee Network Security Platform
Mnger Applince Quick Strt Guide Revision B McAfee Network Security Pltform This guide is high-level description of how to instll nd configure the Mnger Applince. For more detiled instlltion informtion,
Small Business Networking
Why network is n essentil productivity tool for ny smll business Effective technology is essentil for smll businesses looking to increse the productivity of their people nd processes. Introducing technology
COMBICON Spring Cage Plugs and Headers with Self-Locking Flange 5.08 mm Pitch
COMBICON Spring Cge Plugs nd Heders with Self-Locking Flnge The new FKC-RF spring cge plug offers new locking system: the fst plug locking system bsed on the "click'n lock" principle. When the plug is
4-1 NAME DATE PERIOD. Study Guide. Parallel Lines and Planes P Q, O Q. Sample answers: A J, A F, and D E
4-1 NAME DATE PERIOD Pges 142 147 Prllel Lines nd Plnes When plnes do not intersect, they re sid to e prllel. Also, when lines in the sme plne do not intersect, they re prllel. But when lines re not in
Matt Morgan Assistant Superintendent of Support Services. From: Darin Crawford Food Service Director. Date: November 22, 2013
To: Mtt Morgn Assistnt Superintendent of Support Services From: Drin Crwford Food Service Director Dte: Re: November 22, 2013 Centrl Pckging Contrct No. 13-10-3688 The following bids were received nd opened
4/3, 4/2 and 3/2 directional valve. with mechanical,manual operation. Type WMM16, 25 and 32. Contents. Features 01/08 2.5
01/0 /, / nd / directionl vlve with mechnicl, mnul opertion.5 Type WMM1, 5 nd Size 1, 5 nd Up to 15r Up to 10L/min Contents Function nd configurtions 0 Specifictions 0 Symols 0 Technicl dt 0 Chrcteristic
CLASS T JLLN / JLLS SERIES FUSES
POWR-GRD Fuse Datasheet CLSS T JLLN / JLLS SERIES FUSES 0/ VC Fast-cting - Description JLLN / JLLS fuses are less than / the size of comparable Class R fuses and are typically used for short circuit protection