Leica DVM Technical Information. Living up to Life

Transcription

1 Leica DVM Technical Information Living up to Life

2 Leica DVM5000 Specifications Name Camera Image pickup device Scanning method Number of of pixels Number of effective pixels Frame rate Item 1/1.8 inch CCD (2.11 million pixels) Progressive scanning method Approx million, 1688 (H) 1248 (V) Approx million, 1628 (H) 1236 (V) 15 frames/second Electronic shutter AUTO (1/15 to 1/15000), 1/15000, 1/8300, 1/5800, 1/4400, 1/3600, 1/2500, 1/1000, 1/500, 1/250, 1/125, 1/60, 1/30, 1/15 sec Slow shutter 1/7.5, 1/4, 1/2, 1, 2, 4, 8, 16 sec Gain MANUAL, OFF White balance AUTO (One-push), MANUAL (R, B) Image adjustment Gamma correction, color correction, edge enhancement LCD monitor Screen size 15-inch TFT color liquid crystal display Pixel pitch (H) (V) mm Number of 1600 (H) 1200 (V) dots on screen Luminance 200 cd/m 2 (Standard) Contrast ratio 500:1 (typical) Viewable angle Horizontal: 170 Vertical: 170 (standard) Light source Lamp 60 W metal halide lamp Lamp life 4,000 hours (average) Color temperature 5500±100K Output Analog RGB output UXGA, SXGA, XGA Printer output USB (B-type), PictBridge compatible LAN 10BASE-T, 100BASE-TX, 1000BASE-T AUX RS-232C connector Input Mouse USB (A type) Keyboard USB (A type) Microphone MIC input jack External remote 6-pin, round terminal ACS connector 10-pin, round 2

3 Leica DVM5000 Specifications Name Item Recording Recording medium Hard disk: approx. 160 GB (including the system area), CD-R/-RW, DVD-R/+R/ +R DL/-RW/+RW/RAM Still image format When not compressed: TIFF (EXIF-compliant), BMP When compressed: JPEG (EXIF-compliant) Compress mode JPEG: FINE, STANDARD, High COMP, MAX COMP Number of recording pixels for still image Moving image recording format Number of recording pixels for moving image Normal: , , , , , High resolution: , , , AVI (uncompressed) (7.50 FPS), (7.50 FPS), (15.00 FPS), (15.00 FPS), (15.00 FPS) Tool Image adjustment Contrast adjustment, edge enhancement, noise reduction, binary Observation tool Focus control, focus display function, digital real-time zoom, screen division (2x vertical and horizontal, 4, 9, 16 ) Measurement Automatic measurement (surface, perimeter, width), distance measurement (between two points, circles, parallels, X and Y, vertical lines), area measurement, circle measurement, angle measurement, counting, comment, saving the measured values, height measurement, 2D/3D profile measurement) General Specifications Name Item Rated supply voltage 100 to 240 V AC, 50/60 Hz Power consumption (Current) 250 W ( A) Ambient temperature 5 C to +40 C (with no icing or condensation) Storage temperature -15 C to +50 C (with no icing or condensation) Ambient humidity 25 % to 85 % (with no condensation) Ambient environment No corrosive gases 3

4 Leica DVM3000 Specifications Name CCD Effective Pixels Flame Rate White balance Item 1/1.8 CCD, 2.11 megapixels 1628 (H) 1236 (V) 24 fps (Analog RGB), 15 fps (IEEE1394.b) Manual (R, B Gain), One Push AUTO Shutter 1/15000, 1/8000, 1/4000, 1/2000, 1/1000, 1/500, 1/250, 1/100, 1/60, 1/24 Recording 1/8, 1/4, 1/2, 1, 2, 4, 8 Gain Shutter=effective at 8, 4, 2, 1, 1/2, 1/4, 1/8 AGC: 0dB - 12dB Manual: 0dB, 3dB, 6dB, 9dB,12dB RGB Black Level Volume Gamma ON/OFF Gamma characteristics (RGB commonness) Trimming (RGB independence) switch 12 phases (picture basics set point) Color Bar Enable (a full field bar) Image Freezing Function Analog RGB Output Interface Analog RGB, IEEE1394.b Environmental Condition Temperature: 0-40 C Humidity: Less than 85 % Recording Environmental Condition Temperature: C Humidity: Less than 70 % Light source 60 W metal halide lamp Power Supply AC V Size 330(W) 100(H) 305(D) Weight Main Unit: approx. 3.8kg, Camera Unit: approx. 1kg 4

5 Leica DVM2000 Specifications Name Item Digital camera Camera type Digital camera for microscopy with control software Sensor Interline progressive scan CCD Sensor type/size 1/1.8" Color filter RGB Bayer Mosaic Protective filter Hoya E-CM500S Shutter control Electronic global shutter/progressive scan readout Pixel resolution Max. scalable resolution (PC only) pixels Pixel size 4.4 μm 4.4 μm Color depth 3 12-bit A/D converter 12-bit Dynamic range typically > 54 db Readout noise σ < 0.5 LSB (8-bit) Exposure time 4 μsec 1 sec Gain control/gain 0 20 db Shading correction Yes, stored for all formats Image section (ROI) Genuine partial image scan for higher image rates Through Image FullScreen binning Minimum system requirements for PC Pentium 4, 2.5 GHz, 1 GB RAM, 24-bit graphics card, CD drive, FireWire or available PCI slot Supported operating systems Windows XP Service Pack 2, Windows Vista (Ultimate recommended), Windows 7 Interfaces Optical C Mount Recommended video adapter Digital output FireWire IEEE1394b and IEEE1394a compatible Technical data and operating environment Energy consumption ± 3 watts Power supply via IEEE1394b (9-pin) Housing Die-cast aluminum Dimensions 36 mm 36 mm 48 mm Weight < 90 g Operating temperature +5 C +50 C Ambient humidity 10 % 90 % non-condensing 5

6 Leica DVM5000 Dimensions When monitor is closed When monitor is open (420.4) (154) (342.6) (90 ) (429.6) Glass fiber coupled camera for DVM /4-20UNC depth Minimum bending radius Minimum bending r = 70 mm radius R=

7 LEICA DVM Read connection points correctly White and gray points form a connection LEICA DVM 5000 DVM DVM , FWb, PCI-Express , 3 m, FWb DVM Two white points or two gray points do not form a connection 2 Optional connection (additional accessory, nonessential component) Calibration slide , FWb, PCI-Express US JP Leica Software (LAS, DFC Twain) Keyboards PC software Image capture D measurement D measurement for enc D profile Advanced 3D profile Article descriptions Main units DVM5000 Digital Video Microscope, with integrated 60-watt metal vapor lamp, CCD camera with 2.11 megapixels, light guide, 2D measurement, 3D observation and measurement, SmartTiling software, still, video and time lapse acquisition DVM5000 calibration slide Keyboard for DVM5000, Layout: USA Keyboard for DVM5000, Layout: Japan DVM3000 Digital Video Microscope, main unit, with integrated 60 W metal halide lamp, CCD camera with 2.11 megapixels, light guide, requires PC for image processing and analysis DVM3000 image acquisition software DVM3000 2D measuring software, PC-based, requires DVM3000 2D measuring software for encoded zooms, PC-based, requires D profile analysis and measurement software for DVM3000 and DVM Advanced 3D profile analysis and measurement software for DVM3000 and DVM5000, PC-based, control of the motorized Z-drive DVM2000 digital camera, color digital camera for DVM systems with C-mount interface FireWire card (FWb), PCI express, for connecting the DVM2000 / DVM3000 with a PC (slot in PC required) FireWire cable FWb, 3 m DVM control unit, interface and control unit for connecting the DVM5000 / DVM3000, SmartTouch, DVM LED illuminator Digital zooms VZ75 C zoom, encoded, magnification, for DVM5000 and DVM3000, contact adapter, variable lighting adapter and contact adapter VZ75 zoom, magnification, for DVM5000 and DVM3000, contact adapter, variable lighting adapter and contact adapter VZ80, zoom VZ80 C, zoom, encoded VZ80 R, zoom ( ), motorized rotary head VZ80 RC, zoom ( ), motorized rotary head, encoded Non-contact adapter, snap-on type for VZ80 R & VZ80 RC, VZ85 R and VZ85 RC for , , and VZ100, coaxial, 10:1 zoom, magnification (depending on objective used) VZ100 C, coaxial, 10:1 zoom, encoded, magnification (depending on objective used) Polarizer for VZ100 & VZ100 C VZ700 C, 7.1:1 zoom range, encoded objective revolver with 3 parfocal compound objectives (35-250, , )

8 VZ10, 10:1 macro zoom, 1 50 magnification Ring illuminator for VZ VZ10 M, 10:1 macro zoom, 1 to 50 magnification with macro switch and integrated illumination VZ10 MC, 10:1 macro zoom, encoded, 1 to 50 magnification with macro switch and integrated illumination VZ18 BGA; Normal and wide-field mode, zoom ring for magnification change, focusing ring Backlighting for VZ18 BGA; Option for Replacement prisms for VZ18 BGA VZ85, C-mount zoom VZ85 C, C-mount zoom, encoded VZ85 R, C-mount zoom ( ) with motorized rotary head VZ85 RC, C-mount zoom ( ) with motorized rotary head, encoded VZ105, coaxial, 10:1 zoom, magnification (depending on objective used) VZ105 C, coaxial, 10:1 zoom, encoded, magnification (depending on objective used) Polarizer for VZ105 & VZ105 C VZ15 M, 10:1 macro zoom with C-mount interface, LED illuminator for VZ100, VZ100 C, VZ105 & VZ105 C, for transmitted light equipment with transmitted light XY-stages and , requires DVM control unit LED illumination for DVM C-mount zooms (not compatible with VZ105 & VZ105), requires DVM control unit Adapter for digital zooms Rotary head adapter for zoom VZ75 & VZ75 C, 360 rotational inspection with 45 viewing angle Diffuser for rotary head adapter Low magnification (0.3 ) adapter (6 48 ) for VZ75 & VZ75 C High magnification (2 ) adapter ( ) for VZ75 & VZ75 C Low magnification rotary head adapter for (0.3 ) for VZ75 & VZ75 C, 360 rotational inspection with 45 viewing angle L-shaped side view adapter (small) for VZ75 & VZ75 C, dark field vertical illumination, mirror size mm L-shaped side view adapter (large) for VZ75 & VZ75 C, dark field vertical illumination, mirror size mm Diffuser for VZ75 & VZ75 C Adapter for high magnification levels (2 ) and variable lighting ( ) for VZ75 & VZ75 C Polarizing adapter for VZ75 & VZ75 C Coaxial illumination adapter for VZ75 & VZ75 C, for polished and shining specimens, working distance: 10.5 mm Adapter for low magnifications (0.4 ) for VZ80 & VZ80 C Adapter for high magnifications (2 ) for VZ80 & VZ80 C Adapter for high magnifications and variable lighting, for VZ80 & VZ80 C Snap-on adapter for VZ80 and VZ80 C, screw-on mount for snap-on type adapters Diffuser adapter for non-contact adapter , snap-on type for VZ80, VZ80 C, VZ80 R & VZ80 RC...

9 * * * Contact adapter for non-contact adapter , snap-on type for VZ80, VZ80 C, VZ80 R & VZ80 RC Low mag. straight view adapter, snap-on type for VZ80, VZ80 C, VZ80 R & VZ80 RC, magnification High mag. straight view adapter, snap-on type for VZ80, VZ80 C, VZ80 R & VZ80 RC, Adapter for variable illumination angle, snap-on type for VZ80, VZ80 C, VZ80 R & VZ80 RC, illumination angle: 30 65, working distance: 6 21 mm, variable lighting Adapter for high magnification level and var. illumination angle, snap-on type for VZ80, VZ80 C, VZ80 R & VZ80 RC, magnification: Straight view coaxial adapter, snap-on type for Leica VZ80, VZ80 C, VZ80 R & VZ80 RC, for viewing polished and shining specimens Polarizing filter (insertable), snap-on type for VZ80, VZ80 C, VZ80 R & VZ80 RC Lift-off adapter, snap-on type for VZ80, VZ80 C, VZ80 R & VZ80 RC Rotary head adapter (0.4 ), snap-on type for VZ80 R VZ80 RC, 30 viewing with low magnification ( ), Rotary head adapter (2 ), snap-on type for VZ80 R and VZ80 RC, magnification Rotary head adapter with variable viewing angle, snap-on type for VZ80 R and VZ80 RC Diffuser for rotary head adapter Controller for rotary head applications, supports VZ80 R, VZ80 RC, VZ85 R and VZ85 RC Optical rotary adapter for VZ100 & VZ100 C, for producing pseudo-3d effects Objective for VZ100, VZ100 C, VZ105 and VZ105 C ( ); working distance 34 mm Objective for VZ100, VZ100 C, VZ105 and VZ105 C ( ); working distance 21 mm Objective for VZ100, VZ100 C, VZ105 and VZ105 C ( ); working distance 30.5 mm Objective for VZ100, VZ100 C, VZ105 and VZ105 C ( ); working distance 12 mm Objective for VZ100, VZ100 C, VZ105 and VZ105 C ( ); working distance 10.6 mm Objective for VZ100, VZ100 C, VZ105 and VZ105 C ( ); working distance 3.4 mm Dark field ring illuminator for VZ100, VZ100 C, VZ105 and VZ105 C Directional lighting adapter for VZ700 C Fixed Iris Adapter for VZ700 C, to increase depth of focus Adjustable Iris Adapter for VZ700 C, to variably increase depth of focus Center Iris Adapter for VZ700 C, to increase depth of focus Polarizing Adapter for Leica VZ700 C Single Wavelength Adapter for VZ700 C, allows transmission of 500nm ± 50nm Optical Rotary Adapter for Leica VZ700 C; Enables variable pseudo 3D effect * for / / / only

10 Leica digital zooms (600 mm) (400 mm) DVM3000 / 5000 light source Transmitted and incident light bases Light guide for using transmitted light XY-stage Coarse/fine focus drive for DVM applications Coarse/fine focus drive with integrated motorized Incident light XY-stage for DVM applications Transmitted light XY-stage for DVM applications Incident light adapter for incident light XY-stage Transmitted light adapter for transmitted light XY-stage Tilting stand for DVM, with integrated height adjustment and 360 rotation for XY-stage, 180 tilting range Interface for routine focus drives of the M series, connection between DVM zooms and coarse focus drive / and coarse / fine focus drive / mm column for DVM equipment, includes column for and , adapter for incident light base and incident or transmitted light adapter / mm column for DVM equipment, includes column for and , adapter for incident light base and incident or transmitted light adapter / Interface ring for XY-stage adapter, connects XY-stage adapters and with incident light base SmartTouch, control unit with integr. touchscreen Manual controller for motorized focus Footswitch Focusing drive, coarse/fine, with 500 mm profile column Coarse focusing drive with profile column 500 mm Incident-light base medium Gliding stage, 120 mm Cup stage, 120 mm Baseplate, small Baseplate, medium Vertical column 470 / 35 mm Horizontal arm ESD Horizontal arm standard Flange Stage clamp Focusing drive with inclinable column Focusing drive, coarse/fine, with inclinable column

11 Leica DVM3000 Dimensions Leica DVM2000 Dimensions Front View Side View 26 1,8 48 8,2 ±0, ,5 13,5 Back View O 30 3, ,5 Top View 11

12 DVM Zooms Optical Data Leica VZ75 / VZ75 C Model Leica VZ75 / VZ75 C Adapters Normal Low High Magnifying power mm / inch Working distance 44 / 1.73" 132 / 5.2" 20 / 0.79" ACS option Field of view / " / " / " Depth of field / " / " / " Yes Leica VZ80 / VZ80 C / VZ80 R / VZ80 RC & Leica VZ85 / VZ85 C / VZ85 R / VZ85 RC Model Leica VZ80 / VZ80 C / VZ80 R / VZ80 RC / VZ85 / VZ85 C / VZ85 R / VZ 85 RC Adapters Normal Low High Magnifying power Working distance * 63 / 2.48" 80 / 3.15" 29 / 1.14" mm / inch ACS option Working distance ** 54 / 2.13" 28.5 / 3.15" 20 / 0.79" Field of view / " / " / 0.12" " Depth of field / 0.11" mil / " / 0.03" mil Yes * for VZ80, VZ80 C, VZ85 and VZ85 C ** for VZ80 R, VZ80 RC, VZ85 R and VZ85 RC with straight view snap-on adapter Leica VZ100 / VZ100 C / VZ105 / VZ105 C Model Leica VZ100 / VZ100 C Objective Magnifying power Working distance (WD) 34 / 1.34" 21 / 0.83" 30.5 / 1.20" 12 / 0.47" 10.6 / 0.42" 3.4 / 0.13" mm / inch µm µm Field of view " " " " mil mil Numerical Aperture ACS option Yes 12

13 Leica VZ700 C Model Leica VZ700 C Adapters Normal High Low Magnifying power mm / inch Working distance 10.0 mm ± 0.2 mm ACS option Field of view mm mm Depth of field mm mm mm Yes Illumination methods Brightfield, Darkfield, Mixture Lighting Leica VZ10 Model Leica VZ10 Magnifying power 1-50 mm / inch Field of view / 0.24" Working distance (WD) / 0.84" ACS option N/A Leica VZ10 M / VZ10 MC / VZ15 M Model Leica VZ10 M / VZ10 MC / VZ15 M Magnifying power View (mm / inch) - 61 / - 2.4" / " Working distance (WD) - 90 / " 90 / 3.55" ACS option Yes (only VZ10 MC) VZ18 BGA Model Prism adaptation width VZ18 BGA 0.9 mm Viewing angle 90 Magnifying power Working distance mm (distance between prism apex and BGA soldered joint) 13

14 Zoom systems: Adapter offering Leica VZ75 / VZ75 C Magnification range Low Normal High Leica VZ80 R / VZ80 RC & VZ85 R / VZ85 RC Magnification range Low Normal High Normal lens adapter 1.0 Working distance: 44 mm Contact Adapter Included in the delivery package ACS cable & clamp (only VZ80 C / VZ85 C) Normal lens adapter 1.0 Included in the delivery package Variable Lighting Adapter Fixture ACS cable & clamp (only VZ75 C) Attachment optics Adapter 0.4 ( ) Working distance: 80 mm Adapter 2 ( ) Working distance: 20 mm Lift-off adapter Working distance: 3 mm Adapter 0.3 ( ) Working distance: 132 mm Contact Adapter Working distance: mm Adapter 2 ( ) Working distance: 20 mm Diffuse light adapter Working distance: 4 mm Attachment optics Diffusers, polarizers, oblique illumination Rotary heads L-shaped side view adapter (small) Working distance: mm L-shaped side view adapter (large) Working distance: mm Diffuse light adapter Working distance: 0 4 mm Adapter for variable lighting (high mag.) Working distance: 1 mm Polarizing adapter (with filter insert) Working distance: 31 mm Rotary head adapter for Working distance: 12 mm Diffuse light adapter for rotary head ( ) Rotary head for low magnifications Working distance: 27 mm Diffusers, polarizers, oblique illumination Rotary heads Coax Adapter for variable lighting (high mag.) Working distance: mm Variable Lighting Adapter Working distance: 6 21 mm Polarizing adapter (with filter insert) Working distance: 54 mm Rotary head adapter for Working distance: 9 25 mm Diffuse light adapter for rotary head ( ) Rotary head for low magnifications Working distance: 28.5 mm Rotary head for high magnifications Working distance: 3.5 mm Coaxial light adapter (requires light source) Working distance: 21 mm - Coax Coaxial light adapter (requires light source) Working distance: 10.5 mm 14

15 Zoom systems: Adapter offering Leica VZ100 / VZ100 C & VZ105 / VZ105 C Magnification range Normal Leica VZ80 / VZ80 C & VZ85 / VZ85 C Magnification range Low Normal High Included in the delivery package Sickle diaphragm ACS cable & clamp (only VZ100 C / VZ105 C) Included in the delivery package ACS cable & clamp (only VZ80 C & VZ85 C) Adapter for complete adapter pallet of VZ80 R / VZ80 RC & VZ85 R / VZ85 RC Objective ( ) Working distance: 34 mm Objective ( ) Working distance: 21 mm Attachment optics Adapter Working distance: 80 mm Adapter 2 ( ) Working distance: 29 mm Objective ( ) Working distance: 30.5 mm Objective ( ) Working distance: 12 mm Illumin. Adapter for variable lighting (high mag.) Working distance: mm Objectives Polarization Illumin. Objective ( ) Working distance: 10.6 mm Objective ( ) Working distance: 3.4 mm Polarizing adapter (with filter insert) (VZ100 / VZ100 C) Polarizing adapter (with filter insert) (VZ105 / VZ105 C) Dark field ring illuminator Leica VZ700 C Included in the delivery package Magnification Range All 3 Sickel diaphragm ACS cable & clamp Fixed Iris Adapter Adjustable Iris Adapter Center Iris Adapter Leica VZ10 M / VZ10 MC & VZ15 M Included in the delivery package Leica VZ10 Included in the delivery package Illumin. ACS cable & clamp (only VZ10 MC) Fixture Ring illuminator Illumination Polarization Single Wavelength Adapter (500nm ± 50nm) Optical Rotary Adapter Polarisations-Adapter (mit Einschubfilter) Leica VZ18 BGA Included in the delivery package Aux. Optics Illumin. Replacement mirror Replacement prisms Backlight adapter

16 With the user, for the user Leica Microsystems Leica Microsystems operates globally in four divi sions, where we rank with the market leaders. Life Science Division The Leica Microsystems Life Science Division supports the imaging needs of the scientific community with advanced innovation and technical expertise for the visualization, measurement, and analysis of microstructures. Our strong focus on understanding scientific applications puts Leica Microsystems customers at the leading edge of science. Industry Division The Leica Microsystems Industry Division s focus is to support customers pursuit of the highest quality end result. Leica Microsystems provide the best and most innovative imaging systems to see, measure, and analyze the microstructures in routine and research industrial applications, materials science, quality control, forensic science investigation, and educational applications. Biosystems Division The Leica Microsystems Biosystems Division brings histopathology labs and researchers the highest-quality, most comprehensive product range. From patient to pathologist, the range includes the ideal product for each histology step and high-productivity workflow solutions for the entire lab. With complete histology systems featuring innovative automation and Novocastra reagents, Leica Microsystems creates better patient care through rapid turnaround, diagnostic confidence, and close customer collaboration. Medical Division The Leica Microsystems Medical Division s focus is to partner with and support surgeons and their care of patients with the highest-quality, most innovative surgi cal microscope technology today and into the future. The statement by Ernst Leitz in 1907, with the user, for the user, describes the fruitful collaboration with end users and driving force of innovation at Leica Microsystems. We have developed five brand values to live up to this tradition: Pioneering, High-end Quality, Team Spirit, Dedication to Science, and Continuous Improvement. For us, living up to these values means: Living up to Life. Active worldwide Australia: North Ryde Tel Fax Austria: Vienna Tel Fax Belgium: Groot Bijgaarden Tel Fax Canada: Richmond Hill/Ontario Tel Fax Denmark: Ballerup Tel Fax France: Nanterre Cedex Tel Fax Germany: Wetzlar Tel Fax Italy: Milan Tel Fax Japan: Tokyo Tel Fax Korea: Seoul Tel Fax Netherlands: Rijswijk Tel Fax People s Rep. of China: Hong Kong Tel Fax Portugal: Lisbon Tel Fax Singapore Tel Fax Spain: Barcelona Tel Fax Sweden: Kista Tel Fax Switzerland: Heerbrugg Tel Fax United Kingdom: Milton Keynes Tel Fax USA: Buffalo Grove/lllinois Tel Fax and representatives in more than 100 countries 10IDD10020EN Leica Microsystems (Switzerland) Ltd CH-9435 Heerbrugg, 2011 Printed in Switzerland III.2011 RDV Illustrations, descriptions and technical data are not binding and may be changed without notice.