Machine Tool Quality. Patented Synchronous Technology - Extended Life

Transcription

1 ZAYTRAN Parallel Grippers Machine Tool Quality Thousands of ZAYTRAN parallel grippers have demonstrated machine tool quality in die casting, forging, and other torturous environments. Bodies are hardcoated to a Rockwell(c) 70 hardness. All cylinder bores are roller burnished and TFE impregnated to improve seal life and minimize friction. The pistons are ground and electroless nickel-plated for environmental hardening and to minimize seal friction. Gib plates are hardened and ground and the solid steel movable, jaw-mounting slide is electroless nickel-plated. ZAYTRAN parallel grippers are engineered to go 10,000,000 cycles and beyond! Patented Synchronous Technology - Extended Life Synchronous grippers utilize ZAYTRAN US patent number The force and synchronizing double helix are independent systems. The double helix works only to center the part to ±0.001 inches. All of the gripping force is provided by two pistons that are driven either pneumatically or hydraulically. The independence of the force and synchronization systems provides precision over the typical 10,000,000+ cycle life of the unit. Synchronized Parallel Gripper Extend Port Retract Port Piston 1 Piston 2 Jaw Mounting Slide 1 Jaw Mounting Slide 2 Double Synchronizing Helix Phone ZAYTRAN GRIPPERS Page 1 FAX , 1996, 1997 ZAYTRAN, INCORPORATED, All Rights reserved. Printed in the United States of America. Specifications subject to change.

2 ZAYTRAN Grippers Special Capabilities ZAYTRAN offers the broadest line of parallel grippers available today. The GPL Long stroke grippers provide unsurpassed flexibility in handling a wide variety of parts. Ultra Long Stroke To handle a wide variety of parts JAW TORQUE & FORCE The forces and moments indicated in the chart below are for loads after the gripper has grasped the part and the jaws have completed their motion. If force and torque is applied to the gripper while the jaw is moving please see the ZAYTRAN XRAY series catalog. Mb F1 F2 Ma Mc Model Ma IN-Lbs (kgf-cm) Mb IN-Lbs (kgf-cm) Mc IN-Lbs (kgf-cm) F1 Lbs (kgf) F2 Lbs (kgf) GP to GPUL-5 2 (5) 4 (50) 54 (60) 5 (2.) 5 (2.) GP & GPL (100) 162 (190) 86 (100) 12 (5.5) 14 (6.4) GP & GPL (180) 270 (00) 10 (150) 24 (10.9) 28 GP & GPL (40) 42 (500) 02 (50) 62 (28.0) 42 (19.2) GP & GPL (750) 1080 (1250) 121 (1400) 246 (111.8) 169 (77.0) GP & GPL (1250) 1825 (2100) 2020 (200) 750 (40.9) 556 (252.5) GP & GPL (2000) 2905 (50) 424 (4000) 1000 (454.5) 928 (421.7) Phone ZAYTRAN GRIPPERS Page 2 FAX

3 GP-5 Standard Stroke 0.20 in.(5.08 mm) 6.9 lbs.(.1kgf) 1.5 lbs.( PSI(6.80 bar) 1.6 oz.(45.6 g).00(.491) (.0) 150 PSI(10.20 bar), Air only.42 (10.6) (.0).42 *-56 THR'D (10.6) Optional Top Porting.245(6.2).240(6.1).70 (17.8).45 (11.4) 1.00 (2.) 4-40 THR'D x.17 DEEP FOR.10 (2.5) (2.5) (17.4) 1.25 (1.8) (5.6) (5.6).22 (5.5) 1.98(50.2) FULL OPEN 1.78(45.2) FULL CLOSE.25 (6.4) -48 THR'D x.10 DEEP (9.52) x.0(.76) DEEP.80(9.65) (.0) *-56 THR'D *BARBED FITTING FOR 1/16 I.D. TUBE SUPPLIED BY ZAYTRAN INC. GPL-5 Long Stroke 0 in.(12.7 mm) 6.9 lbs.(2.1 kgf) 1.5 lbs.( PSI(6.80 bar) 2.02 oz.(57 g).075(1.2) 150 PSI(10.20 bar), Air only.57 (14.5) (.0) (.0).57 (14.5) Optional Top Porting.70 (17.8).245(6.2).240(6.1) *-56 THR'D.45 (11.4) (2.) THR'D x.17 DEEP FOR.10 (2.5).25 (6.4).22 (5.6) (2.5) (2.0) 1.56 (9.6) (.0).22 (5.6) (2.2) 2.69(65.8) FULL OPEN 2(5.1) FULL CLOSE.28 (7.1) -48 THR'D x.10 DEEP (9.52) x.0(.76) DEEP.80(9.65) (.0) *-56 THR'D *BARBED FITTING FOR 1/16 I.D. TUBE SUPPLIED BY ZAYTRAN INC. GPUL-5 Ultra Long Stroke.150(2.46) (.0) 1.00 in.(25.4 mm) 6.9 lbs.(.1 kgf) 1.5 lbs.( PSI(6.80 bar) 2.5 oz.(71.72 g).82 (20.8) 150 PSI(10.2 bar), Air only.82 (20.8) *-56 THR'D Optional Top Porting.70 (17.8).245(6.2).240(6.1) (.0).45 (11.4) 1.00 (2.).10 (2.5) 4-40 THR'D x.17 DEEP FOR.10 (2.5).25 (6.4) (.0) 2.06 (52.2) (14.2) (14.2) 1.16 (29.) (2.5).59(91.1) FULL OPEN 2.59(65.7) FULL CLOSE.28 (7.1) -48 THR'D x.10 DEEP (9.52).80(9.65) (.0) *-56 THR'D x.0(.76) DEEP *BARBED FITTING FOR 1/16 I.D. TUBE SUPPLIED BY ZAYTRAN INC..25 (6.4) (.0) Phone ZAYTRAN GRIPPERS Page FAX

4 GP-10 Standard Stroke THR'D 1.96 (49.8).70 (17.8) (9.4) (9.4).70 (17.8) 5-40 THR'D.21.7 (5.) (9.4) 0.25 in.(6.5 mm) 17.2 lbs.(7.8 kgf) 26.9 lbs.(12.2 kgf).51 lbs.(21. g).075(1.2).67 (17.0) 1.56 (9.6).98 (24.9).62 (15.8) 0 5(12.8).28 (7.1) x.06(1.5) DEEP 6-2 THR'D.17 (4.).7 (9.4).52 (1.2).52 (1.2).21.7 (5.) (9.4) 4-40 THR'D.2 (8.1) 10-2 THR'D CLOSING.58 (14.7).58 (14.7) 10-2 THR'D OPENING.19 (4.8).05 (9.5) (1.).70(9.4) (2.).98 (24.9) 2.86(72.7) FULL OPEN 2.61(66.) FULL CLOSE 8-2 THR'D FOR.1 (.2) Optional Side Porting.19 (4.8) GPL-10 Long Stroke 0 in.(19.1mm) 17.2 lbs.(7.8 kgf) 26.9 lbs.(12.2 kgf) lbs.(40.2 g).225(.69) 1.56 (9.6).67 (17.0).98 (24.9).62 (15.8) 0 5(12.8).28 (7.1) 10-2 THR'D x.06(1.5) DEEP 6-2 THR'D.7 (9.4).17 (4.) 2 (69.9) (24.1) (24.1) (9.4) (9.4) (19.1) (19.1) 5-40 THR'D.21.7 (5.) (9.4).21.7 (5.) (9.4) 4-40 THR'D.2 (8.1) 10-2 THR'D 10-2 THR'D CLOSING (21.6) (21.6) OPENING.19 (4.8).05 (1.) (9.5).70(9.4) 8-2 THR'D FOR 1.25 (2.) (1.8).90(99.1) FULL OPEN.15(80.0) FULL CLOSE.14 (.5) ING.7.19 (9.4) (4.8) Phone ZAYTRAN GRIPPERS Page 4 FAX

5 GP-20 Standard Stroke 10-2 THR'D 2 (6.5).9.9 (2.6) (2.6) 8-2 THR'D.21 (5.) 0 in.(12.7 mm) 0.4 lbs.(1.8 kgf) 0(19.05) x(2.) DEEP 5(19.17).21 (5.) 52.5 lbs.(2.8 kgf) 1.15 lbs.(521.6 g).29(4.80).98 (24.9) 2.26 (57.4) 1.4 (4.0) (19).1 (7.9).2 (5.8).68 (17.1).84 (21.).68 (17.1).84 (21.) 8-2 THR'D.24 (6.1) 6-2 THR'D 1 (8.1) 10-2THR'D CLOSING Optional Side Porting.80 (20.).80 (20.) 10-2 THR'D OPENING.18 (4.6).47(11) (2.28).42(10.97) 8-2 THR'D FOR 1.25 (.0) (1.8).87(98.4) FULL OPEN.7(85.7) FULL CLOSE.15 (.8) (4.8) GPL-20 Long Stroke 10-2 THR'D 4 (104.7) (0.0) (0.0) 8-2 THR'D.21 (5.) 1.00 in.(25.4mm) 0.4 lbs.(1.8 kgf) 52.5 lbs.(2.8 kgf) 1.4 lbs.( g).586(9.60) 2.26 (57.4).98 (24.8) 0(19.05) 5(19.17) 1.4 (4.0) (19) x (2.28) DEEP.1 (7.8).2 (5.8) (19) 1.00 (19) (5.) 8-2 THR'D.25 (6.4) 1 (8.1) 6-2 THR'D 10-2 THR'D CLOSING Optional Side Porting 10-2 THR'D OPENING.18 (25.9) (25.9) (4.6) (2.).47(11).42(10.97) (.0) 8-2 THR'D FOR 1 (8.1) 4.87(12.8) - FULL OPEN.87(98.4) - FULL CLOSED.15 (.8).56 (14.2).19 (4.8) Phone ZAYTRAN GRIPPERS Page 5 FAX

6 GP-40 Standard Stroke 1/8-NPTF 2.95 (74.9) 1 1 (27.6) (27.6) THR'D. (8.4) in.(14.2 mm) 58.2 lbs.(26.4 kgf) 97.9 lbs.(44.4 kgf) 2.95 lbs.(18.10 g).614(10.06) 1.7 (4.8).2 (82.0) 1.98 (50.) 1.25 (1.8) 1.187(0.14) x.10(2.5) DEEP (0) (8.4).5 (1.8).68 (17.2).0 (7.6) THR'D.44 (11.2) 1.88 (47.7) 8-2 THR'D 1/8-NPTF CLOSING OPPOSI TE SIDE.97 (24.8).97 (24.8) OPENING.5 (8.9).28 0(19.05) (7.1).745(18.92) 1/4-20 THR'D FOR.14 1 (.6) (8.1) 4.66(118.)FULL OPEN 4.10(104.1)FULL CLOSE.21 (5.) ING.25 (6.4) GPL-40 Long Stroke 4. lbs.( g) 2.184(5.78) 2.00 in.(50.8mm) 58.2 lbs.(26.4 kgf) 97.9 lbs.(44.4 kgf).2 (82.0) 1.98 (50.2) 1.7 (4.7) 1.25 (1.7) (4.7) (1.4) 1.187(0.14) x.10(2.5) DEEP 1.192(0) 1.81 (45.9) 1 (28.4) 5.95 (151.1) 1.81 (45.9) 1 (28.4) THR'D 1.25 (1.8) THR'D. (8.). (8.) THR'D CLOSING OPPOSI TE SIDE 1.49 (7.9) 1.49 (7.9) OPENING.5 (8.9).28 (7.1) 0(19.05).745(18.92) 1/4-20 THR'D FOR 2 (57.7) 7.59(192.7) - FULL OPEN 5.61(142.5) - FULL CLOSED.15 (.7).0 (7.6).16 (4.1) ING.59 (14.9).25 (6.4) Phone ZAYTRAN GRIPPERS Page 6 FAX

7 GP-100 Standard Stroke 1.00 in.(25.4 mm) 1/4- NPTF 1.76 (44.7) 4.42 (112.) 1.76 (44.7) (19.0) (19.0) 1/4-20 THR'D.4 (10.9) (19.0) 16.8 lbs.(62.0 kg) lbs.(98.2 kg) 6.00 lbs.( g) (9.459).7 (94.7) 1.62 (41.1) 2.25 (57.2) 1 (8.1) (1) x (.1) DEEP (1.87) (19.0).42 (10.6).9 (2.6) (28.7) (28.7).4 (10.9) 1/4-20 THR'D.2 (5.8) 2 (69.9) (19.0) 10-2 THR'D CLOSING 1.7 (4.8) 1.7 (4.8) OPENING.0 (7.6).875(22.22).870(22) 1/4-20 THR'D FOR (.0) 2.1 (58.6) 6.86(174.1) FULL OPEN 5.86(148.7) FULL CLOSE.15 (.7) Optional Side Porting.58 (14.7).29 (7.) GPL-100 Long Stroke.00 in.(76.2mm) 16.8 lbs.(62.0 kgf) lbs.(98.2 kgf) 9.24 lbs.( g) 7.216(118.24) 1/4 NPTF.7 (94.7) 1.62 (41.1) 2.25 (57.2) 1.62 (41.1) 1 (8.1) (19.1) 2.69 (68.) 1.250(1) x (.1) DEEP 1.255(1.88) 1/4-20 THR'D 1 (44.5) 8.9 (226.8) (19) (19) 1.1 (28.7) 1 (44.5) 1.1 (28.7) 2.69 (68.) 1/4-20 THR'D.4 (10.9).4 (10.9) 10-2 THR'D.2 (6.4) 2 (69.9) (19) (19) ING CLOSING 2.25 (57.2) 2.25 (57.2) OPENING.0 (7.6).875(22.2).870(22.10) 1/4-20 THR'D FOR.25 (82.6) 10(27.1) - FULL OPEN 7(196.9) - FULL CLOSED.15 (.7).42 (10.7) (.1).87 (22.1).25 (6.4) Phone ZAYTRAN GRIPPERS Page 7 FAX

8 GP-200 Standard Stroke 1.62 in.(41.15 mm) 22.1 lbs.(101.2 kgf) 11.7 lbs.(141.4 kgf) 11.6 lbs.( g) (94.72) ING 4.72 (119.9) 2.00 (50.8) 2.7 (69.) 2.00 (50.8) /4 NPTF 1.625(41.28) 1.60(41.40) 5/16-18 THR'D.61 (15.5) 1 (27.7) x (.1)DEEP 5 (19.7) 2 2 (5.8) (5.8).9.9 (2.6) (2.6) (42.4) (42.4) 5/16-18 THR'D.25 (82.6).9 (2.6).9 (2.6) 5/16-18 THR'D 1/4 NPTF CLOSING 1.68 (42.7) 1.68 (42.7) 1/4 NPTF OPENING.4 (10.9).29 (7.4) (25.).24 (6.1) 2.80 (71.1) 9.0(229.2) FULL OPEN 7.41(188.1) FULL CLOSE 5/16-18 THR'D FOR.08 (2.0) (9.4) GPL-200 Long Stroke 4.00 in.(101.6mm) 22.1 lbs.(101.2 kgf) 11.7 lbs.(141.4 kgf) 16.8 lbs.( g) 1.894(227.68) 1/4 NPTF 4.72 (119.9) 2.00 (50.8) 2.7 (69.) 2 (5.8) 2.00 (50.8) (41.) 1.60(41.4) 5/16-18 THR'D.7 (94.7) 1.87 (47.5) (276.1).9.9 (2.6) (2.6) 1.87 (47.5).7 (94.7) x (.1) DEEP (57.2) (57.2) 1 1 (8.1) (8.1) 5/16-18 THR'D.25 (82.6).9 (2.6).9 (2.6) 5/16-18THR'D 1/4 NPTF CLOSING ING 2.87 (72.9) 2.87 (72.9) 1/4 NPTF OPENING.44 (11.2).29 (7.4) (25.) 5/16-18 THR'D FOR 4.0 (102.4) 1.94(5.9) - FULL OPEN 9.94(252.) - FULL CLOSED.14 (.5).61 (15.5).24 (6.1) 1.08 (27.4).7 (9.4) Phone ZAYTRAN GRIPPERS Page 8 FAX

9 GP-400 Standard Stroke 2 in.(8.5 mm) 50.5 lbs.(228.4 kgf) 66.2 lbs.(288.7 kgf) 28.5 lbs.( g) (289.6) ING 6.21 (157.7) 2 (69.9).71 (94.2) 2 (6.5) 1 (8.1) /8 NPTF.000(76.2).005(76.) /8-16 THR'D.85 (21.6) 1.7 (4.8) x.25(6.4)deep 7.4 (188.7) (81.6) (81.6) 1 1 (8.1) (8.1) (50.8) (50.8) 7/16-14 THR'D 4.00 (101.6) (8.1) 1 (8.1) 7/16-14 THR'D /8 NPTF CLOSING 2.5 (59.7) 2.5 (59.7) /8 NPTF OPENING.20 (5.1) 10(44.5) 1.745(44.).40 (10.2) (95.) 12(2.8) FULL OPEN 10.25(260.4) FULL CLOSE 5/16-18 THR'D FOR.24 (6.1).94 (2.9).1 (8.0) GPL-400 Long Stroke 6.00 in.(152.4mm) 50.5 lbs.(228.4 kgf) 66.2 lbs.(288.7 kgf) 9.88 lbs.( g) (695.0) /8 NPTF 6.21 (157.7) 2 (69.9).71 (94.2) 2 (69.9) 2 (6.5) 1 (8.1).000(76.2).005(76.) /8-16 THR'D 4.96 (126.0).25 (82.6) (87.4) 1 1 (8.1) (8.1) x.25(6.4) DEEP 4.25 (108.0) (50.8) (50.8) 4.96 (126.0).25 (82.6) 4.25 (108.0) 7/16-14 THR'D (101.6) 1 (8.1) 1 (8.1) 7/16-14THR'D /8 NPTF CLOSING ING 4 (104.6) 4 (104.6) /8 NPTF OPENING.20 (10.2) 10(44.5) 1.745(44.) 5/16-18 THR'D FOR 5 (19.7) 18.95(481.) - FULL OPEN 12.95(28.9) - FULL CLOSED.24 (6.1).85 (21.6).40 (10.2) 1.19 (0.2).7 (9.4) Phone ZAYTRAN GRIPPERS Page 9 FAX

10 GP Series Proximity Sensors PROXIMITY SENSORS GP 10 - & 20 Series Parallel Grippers PROXIMITY SENSOR CLOSE POSITION mm (9.4) PROXIMITY SENSOR CABLE TO DC SUPPLY & RELAY ADJUSTABLE SENSING TARGET ADJUSTABLE SENSING TARGET PROXIMITY SENSOR OPEN POSITION CABLE TO DC SUPPLY & RELAY Specifications & Dimensions Model 6.5 mm/dc Voltage Range Output Operating Temperatures Shielded Overload Protected 10-60VDC Sourcing (PNP) Sinking (NPN) F F Yes Yes Phone ZAYTRAN GRIPPERS Page 10 FAX

11 GP Series Proximity Sensors PROXIMITY SENSORS GP Series Parallel Grippers ADJUSTABLE SENSING TARGETS ADJUSTABLE BLOCKS.51 (1).67 (17) 6.5mm PROXIMITY SENSOR 12mm PROXIMITY SENSOR PROXIMITY SENSOR OPEN POSITION CABLES TO DC SUPPLY & RELAY PROXIMITY SENSOR CLOSE POSITION Specifications & Dimensions Model 6.5 mm/dc 12 mm/ac Voltage Range 10-60VDC 90-10VAC Output Operating Temperatures Shielded Overload Protected Sourcing (PNP) Sinking (NPN) N.O. N.C F F F F Yes Yes Yes NO Phone ZAYTRAN GRIPPERS Page 11 FAX

12 TA Transitional Adapters Series FOR ROTARY ACTUATORS J K C K P DIA. THRU.9 (2.6) 4 (114.) (47.5) (47.5).9.9 (2.6) (2.6).2 DIA. THRU B J N DIA. THRU A H M L R THR'D SET SCREW D DIA. 2 (6.5).9 (2.6) 1.250(1.57) 1.252(1.80) THRU (22.1) (50.5).15 (.8) 1/4-20 THR'D SET SCREW.1 (7.9) 2.15 (54.6) DIA. F E DIA. G.11 (2.8) 1.624(41.25) 1.622(41.20) DIA. (8.1) SEE CHART BELOW Model: TA-L200 From: RAM-250 to GPL-200 From: RAM-10 RAM-5 RAM-5 RAM-75 RAM-75 RAM-250 To: GP-10 GP-10 GP-20 GP-40 GP-100 GP-200 GPE-10 GPE-10 GPE-20 GPE-40 GPE-100 GPL-10 GPL-10 GPL-20 GPL-40 GPL-100 GPEL-10 GPEL-10 GPEL-20 GPEL-40 GPEL-100 Model: TA-10 TA-15 TA-20 TA-40 TA-100 TA-200 A 0 (19.05) 1.10 (27.94) 1.15 (29.21) 1.0 (.02) 1.0 (.02) 1.99 (50.55) B 0.97 (24.6) 0.97 (24.6) 1. (.78) 1.60 (40.64) 1.98 (50.29) 2 (6) C 0.97 (24.6) 0.97 (24.6) 1. (.78) 1.60 (40.64) 1.98 (50.29) 2 (6) D 0.81 (20.57) 0.81 (20.57) 0.81 (20.57) 1.7 (4.80) 1.7 (4.80) 2.15 (54.6) E.498/ / / / / /1.622 E (metric) (12.65/12.60) (12.65/12.60) (19.00/18.95) (0/0.10) (1.70/1.65) (41.25/41.20) F 0.05 (1) 0.05 (1) 0.08 (2.0) 0.10 (2.54) 0.10 (2.54) 0.11 (2.79) G 0 (.05) 0.17 (4.19) 0.19 (4.8) 0.26 (6.60) 0.26 (6.60) 0 (.05) H 0.9 (9.91) 0.61 (15.49) 0.61 (15.49) 0.56 (14.22) ) 0.87 (22.10) J 0.7 (9.40) 0.7 (9.40) 0 (12.70) 0.62 (15) 0 (19.05) 0.9 (2.62) K 0.7 (9.40) 0.7 (9.40) 0 (12.70) 0.62 (15) 0 (19.05) 0.9 (2.62) L 0 (2.29) 0 (.05) 0 (.05) 0.18 (4.57) 0.18 (4.57) 0.1 (7.87) M 0.04 (1.02) 0.06 (1.52) 0.06 (1.52) 0 (2.29) 0 (2.29) 0.15 (.81) N /.76 /.76 / / / /1.252 N(metric) (9.5/9.55) (9.5/9.55) (9.5/9.55) (15.88/15.90) (15.88/15.90) (1/1.80) P 0.1 (.0) 0.1 (.0) 0.18 (4.57) 0.20 (5.08) 0.26 (6.60) 0.2 (8.1) R /4-20 Phone ZAYTRAN GRIPPERS Page 12 FAX

13 TAL SeriesFOR LINEAR ROTARY ACTUATORS Transitional Adapters M M L K DIA. THRU N DIA. x P DEEP E L D DIA. A J G F DIA. C H B C-BORE FOR "R" SOCKET HEAD CAP SCREW From: LRA-10 LRA-5 LRA-5 LRA-75 LRA-75 LRA-250 LRA-250 To: GP-10 GP-20 GP-40 GP-40 GP-100 GP-100 GP-200 GPE-10 GPE-20 GPE-40 GPE-40 GPE-100 GPE-100 GPL-10 GPL-20 GPL-40 GPL-40 GPL-100 GPL-100 GPEL-10 GPEL-20 GPEL-40 GPEL-40 GPEL-100 GPEL-100 Model: TAL-10 TAL-20 TAL-40 TAL-45 TAL-100 TAL-150 TAL-200 A 1.00 (25.40) 1.16 (29.46) 1.26 (2.00) 1.26 (2.00) 1.26 (2.00) 1.60 (40.64) 1.60 (40.64) B.98 (24.89) 1.4 (4.04) 1.61 (40.89) 1.61 (40.89) 1.99 (50.55) 2.22 (56.9) 2.7 (69.4) C.98 (24.89) 1.4 (4.04) 1.61 (40.89) 1.61 (40.89) 1.99 (50.55) 2.22 (56.9) 2.7 (69.7) D (26.92) 1.25 (1) 1.44 (6.58) 1 (8.10) 1.68 (42.67) 2 (5.85) E.442/.447 5/.510 5/.510 5/.760 5/ / /1.005 E (11.2/11.5) (12.8/12.95) (12.8/12.95) (19.18/19.0) (19.18/19.0) (25.40/25.5) (25.40/25.5) (metric) F.498/ / / / / / /1.62 F (metric) (12.65/12.60) (19.00/18.95) (0/0.10) (0/0.10) (1.72/1.67) (1.72/1.67) (41.25/41.22) G.05 (1).08 (2.0).10 (2.54).10 (2.54).10 (2.54).11 (2.79).11 (2.79) H (4.2).26 (6.60).26 (6.60).26 (6.60) (12.70) (12.70) J.6 (16.00).67 (17.02).67 (17.02).67 (17.02).67 (17.02).94 (2.88).94 (2.88) K.14 (.56).19 (4.8).20 (5.08).20 (5.08) (6.86).29 (7.7).4 (8.64) L.8 (9.65) (12.70).6 (16.00).6 (16.00) (19.05) (19.05).9 (2.62) M.8 (9.65) (12.70).6 (16.00).6 (16.00) (19.05) (19.05).9 (2.62) N.625/.627 0/2 0/ / / / /1.252 N (15.88/15.9) (19.05/19.10) (19.05/19.10) (25.40/25.48) (25.40/25.48) (1/1.80) (1/1.80) (metric) P.8 (9.65).42 (10.67).42 (10.67).42 (10.67).42 (10.67).66 (16.76).66 (16.76) R / /16-18 /8-16 /8-16 /8-16 /8-16 Phone ZAYTRAN GRIPPERS Page 1 FAX

14 High Efficiency Seals & Lubricants Seal Composition Three types of seals are available: Standard - Buna-N; -40 to 180ºF High Temp- Viton; -40 to 00ºF Non-Lube- Nitroxile; -40 to 180 ºF Lubricants All grippers are pre-lubricated with lifetime lubricant that is designed to last approximately 10,000,000 cycles in typical applications. ORDERING INFORMATION Gripper Type (GP, GPL..) Size (5 to 400) Type of Sensors* BLANK= None DC SINK=DC Sinking DC SOUR=DC Sourcing AC N.O.= AC Normally Open AC N.C.= AC Normally Closed *Not available on 5-Series GP -A B -X -C -D Seals BLANK = Buna N = Nitoxile V=Viton Side Ports/Mount BLANK =None SP = Side Port SM = Side Mount Number of Sensors BLANK= None 1C=One, On Close 1O=One, On Open 2=Two, Close & Open Example: GP-20-V-2-DC SINK Gripper, 20 Size, Viton Seals, two position DC proximity sensors-sinking Phone ZAYTRAN GRIPPERS Page 14 FAX

15 ZAYTRAN ZAYTRAN, Incorporated 4155 Schaden Rd. : PO Box 1660 : Elyria, Ohio, 4406 Tel: Fax: ZAYTRAN, INCORPORATED LIMITED WARRANTY AND DISCLAIMER Zaytran Inc. warrants for one year from the date of purchase for normal use and service that its products are free from defects in materials, workmanship and design. In no instance shall the foregoing be construed as a warranty of fitness for a particular application, and Zaytran Inc. accepts no responsibility of any kind for any of its products that have been subject to improper installation, application, negligence, tampering or abuse or that have been repaired or altered outside the Zaytran factory. Seals and o-rings are specifically excluded from any warranty. The obligation of Zaytran Inc. under this warranty is limited to repair, replacement or correction of any part or product determined by our inspection to be defective. We will not pay for loss of time, inconvenience, loss of use of your Zaytran product, or property damage caused by your Zaytran product or its failure to work, or any other incidental or consequential damages. Some states do not allow limitations on how long an implied warranty lasts or the exclusion or limitation of incidental or consequential damages, so the above exclusions or limitations may not apply to you. Zaytran Inc. makes no other warranties and disclaims responsibility for any damages resulting from use by any buyer or user. The liability of Zaytran Inc. hereunder is limited to the lesser of the value of the product sold and the obligation to replace, repair or correct the defective part. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. Written permission must be obtained from Zaytran Inc. prior to returning any goods for warranty inspection purposes. Zaytran Inc. reserves the right to change designs and specifications without notice. All data and dimensions in catalogs have been thoroughly checked for accuracy; however, Zaytran Inc. cannot assume responsibility for possible errors or omissions. MAGNUM and XRAY are registered Trademarks of ZAYTRAN, Inc. Phone ZAYTRAN GRIPPERS Page 15 FAX