HIGH-DYNAMIC-RANGE INFRARED CAMERA HDR-IR A HIGH-SPEED INFRARED CAMERA KEY BENEFITS. Advanced Calibration : Unique proprietary real-time processing of

Transcription

1 HIGH-DYNAMIC-RANGE HDR-IR A HIGH-SPEED The HDR-IR infrared camera series includes high-performance cameras that cover extended scene temperature ranges. These cameras maximize camera sensitivity automatically for any static or dynamic scene. They automatically operate with the best exposure time depending on the scene, and allow to resolve targets up to C. KEY BENEFITS Ultra High Dynamic Range : Unique Telops proprietary nonlinearity correction and exposure time independent calibration algorithms ensure observation of scene targets with the highest possible contrast and accuracy. Fast automated attenuation filters are also included to measure scenes with extreme temperature variations. High Data Rate : High-performance electronics produce fullframe thermal images at rates up to 300 fps. Advanced Calibration : Unique proprietary real-time processing of infrared images including NUC, radiometric temperature, automated exposure control (AEC) and enhanced high-dynamic-range imaging (EHDRI). Accurate Measurement : Radiometric temperature accuracy of ±1 C or ±1 % over the entire range. Tank muzzle flash analysis Sparkle combustion analysis

2 TECHNICAL SPECIFICATIONS HDR-IR DETECTOR SPECIFICATIONS HDR-IR MW HDR-IR VLW Detector type MCT MCT Spectral range 3 µm to 4.9 µm 7.7 µm to 11.8 µm Spatial resolution 640 x 512 pixels 320 x 256 pixels Detector pitch 16 μm 30 μm Aperture size F/4 F/2 Well depth Selectable well depth (260 ff, 200 ff, 120 ff, 70 ff) 36 Me- Sensor cooling Rotary-stirling closed cycle Rotary-stirling closed cycle TYPICAL PERFORMANCES Maximum full frame rate Scene temperature range 115 Hz x 4 Up to 1500 C Up to 2500 C 300 Hz x 2 Up to 1500 C Up to 2500 C Measurement accuracy 1 K or 1 % ( C) from -15 C to 150 C 1 K or 1 % ( C) from -15 C to 150 C Typical NETD 17 mk 25 mk ELECTRONIC SPECIFICATIONS Exposure time 0.2 μs to full frame rate 0.5 μs to full frame rate Windowing to increase frame rate Yes Yes Dynamic range 16 bits 16 bits CAMERA CONSTRUCTION Lens mount Bayonet interface Threaded interface Size w/o lens mm x mm x mm Weight w/o lens < 13 kg < 13 kg mm x mm x mm Actual product may differ and specifications are subject to change without notice. BACK PANEL INTERFACE 1. IRIG-B 2. HD-SDI 3. Trig-in : Trigger the camera on TTL signal 4. Trig-out : Output TTL signal 5. Thermistor : LCC 6. RS GPS Input : GPS time and location from external GPS receiver 8. CameraLink base/full 9. Ethernet : GigE Vision compatible 10. Power : 24 VDC 60 W steady state. Includes VAC power supply. TELOPS NORTH AMERICA St-Jean - Baptiste Avenue, Quebec, QC, Canada G2E 6J5 Tel.: I Fax: contact@telops.com I TELOPS EUROPE 6 rue du Docteur Schweitzer, 91420, Morangis, France Tel.: Telops. All rights reserved TEL-COMM-00089d

3 HIGH-DYNAMIC-RANGE HDR-IR HD A HIGH-DYNAMIC-RANGE The HDR-IR HD is a high-performance infrared camera that covers extended scene temperature ranges. That camera maximizes camera sensitivity automatically for any static or dynamic scene. It automatically operates with the best exposure time depending on the scene, and allows to resolve targets up to 2500 C automatically. KEY BENEFITS Ultra High Dynamic Range : Unique Telops proprietary non-linearity correction and exposure time independent calibration algorithms ensure observation of scene targets with the highest possible contrast and accuracy. Fast automated attenuation filters are also included to measure scenes with extreme temperature variations. High-Definition Thermal Imagery : Equipped with a 1.3 Megapixel, InSb or MCT detector, it produces the sharpest midwave thermal images available on the market. High Data Rate : Maximum data throughput larger than 1 Gigapixel/s. High-performance electronics produces full-frame thermal images at rates up to 100 fps. Advanced Calibration : Unique proprietary real-time processing of infrared images including NUC, radiometric temperature, in-band radiance, automated exposure control (AEC) and enhanced highdynamic-range imaging (EHDRI). Accurate Measurement : Radiometric temperature accuracy of ±1 C or ±1 % over the entire range. Aircraft IR signature analysis M16 muzzle flash analysis

4 TECHNICAL SPECIFICATIONS HDR-IR HD DETECTOR SPECIFICATIONS HDR-IR HD HDR-IR HD Detector type InSb MCT Spectral range 3 µm to 5 µm 3.7 µm to 4.8 µm Spatial resolution pixels pixels Detector pitch 15 μm 15 μm Aperture size F/3 F/3 Well depth 5.8 Me Me- (1.3 Me- selectable, no calibration) Sensor cooling Rotary-stirling closed cycle Split-stirling closed cycle TYPICAL PERFORMANCES Maximum full frame rate 105 Hz x 8 50 Hz x 4 Scene temperature range Up to 2500 C Up to 2500 C Measurement accuracy 1 K or 1 % ( C) from -15 C to 150 C 1 K or 1 % ( C) from -15 C to 150 C Typical NETD 20 mk 25 mk ELECTRONIC SPECIFICATIONS Exposure time 0.5 μs to full frame rate 16 μs to full frame rate Windowing to increase frame rate Yes Yes Dynamic range 16 bits 16 bits CAMERA CONSTRUCTION Lens mount Bayonet interface Bayonet interface Size w/o lens mm mm mm Weight w/o lens < 13 kg < 13 kg mm mm mm Actual product may differ and specifications are subject to change without notice. BACK PANEL INTERFACE 1. IRIG-B 2. HD-SDI 3. Trig-in : Trigger the camera on TTL signal 4. Trig-out : Output TTL signal 5. Thermistor : LCC 6. RS GPS Input : GPS time and location from external GPS receiver 8. CameraLink base/full 9. Ethernet : GigE Vision compatible 10. Power : 24 VDC 60 W steady state. Includes VAC power supply. TELOPS NORTH AMERICA St-Jean - Baptiste Avenue, Quebec, QC, Canada G2E 6J5 Tel.: I Fax: contact@telops.com I TELOPS EUROPE 6 rue du Docteur Schweitzer, 91420, Morangis, France Tel.: Telops. All rights reserved TEL-COMM-00090d

5 HIGH-DYNAMIC-RANGE HDR-IR FAST A HIGH-DYNAMIC-RANGE The HDR-IR FAST is a high-speed infrared camera that covers extended scene temperature ranges. This camera maximizes camera sensitivity automatically for any static or dynamic scenes. It automatically operates with the best exposure time depending on the scene, and allows to resolve targets up to 2500 C automatically. KEY BENEFITS Ultra High Dynamic Range : Unique Telops proprietary non-linearity correction and exposure time independent calibration algorithms ensure observation of scene targets with the highest possible contrast and accuracy. Fast automated attenuation filters are also included to measure scenes with extreme temperature variations. Ultra High Data Rate : Maximum data throughput larger than 1 Gigapixel/s. High performance electronics produces full-frame thermal images at rates up to 1900 fps. Subwindows can even be acquired faster than fps. High Speed Internal Memory : 16 GB memory for more than 50 seconds of recording and autonomous operation. Advanced Calibration : Unique proprietary real-time processing of infrared images including NUC, radiometric temperature, automated exposure control (AEC) and enhanced high-dynamic-range imaging (EHDRI). Accurate Measurement : Radiometric temperature accuracy of ±1 C or ±1 % over the entire range. Explosion analysis Jet engin characterization

6 TECHNICAL SPECIFICATIONS HDR-IR FAST DETECTOR SPECIFICATIONS Detector type HDR-IR FAST InSb Spectral range 3 µm to 5 µm Spatial resolution Detector pitch Aperture size Well depth Sensor cooling pixels 30 μm F/ Me- (150 ke- available, requires additional calibration) Rotary-stirling closed cycle TYPICAL PERFORMANCES Maximum full frame rate Scene temperature range 1900 Hz 2000 x x 4 Up to 1500 C Up to 2500 C Measurement accuracy 1 K or 1 % ( C) from -15 C to 150 C Typical NETD 25 mk ELECTRONIC SPECIFICATIONS Exposure time Windowing to increase frame rate Dynamic range 1 μs to full frame rate Yes 16 bits CAMERA CONSTRUCTION Lens mount Size w/o lens Weight w/o lens Bayonet interface mm mm mm < 13 kg Actual product may differ and specifications are subject to change without notice. BACK PANEL INTERFACE 1. IRIG-B 2. HD-SDI 3. Trig-in : Trigger the camera on TTL signal 4. Trig-out : Output TTL signal 5. Thermistor : LCC 6. RS GPS Input : GPS time and location from external GPS receiver 8. CameraLink base/full 9. Ethernet : GigE Vision compatible 10. Power : 24 VDC 60 W steady state. Includes VAC power supply. TELOPS NORTH AMERICA St-Jean - Baptiste Avenue, Quebec, QC, Canada G2E 6J5 Tel.: I Fax: contact@telops.com I TELOPS EUROPE 6 rue du Docteur Schweitzer, 91420, Morangis, France Tel.: Telops. All rights reserved TEL-COMM-00091e