Bluetooth Headset. User Guide

Transcription

1 Bluetooth Headset User Guide Contents 1.Introduction... Bluetooth wireless technology. 2. Getting started. Overview. Charger Charging Turning on the headset Turning off the headset Indicator light significations Pairing the headset with a compatible phone Wearing the headset Dialing by the headset Answering /Rejecting a call Redialing the last call Voice dialing Switching the earpiece to the mobile phone Adjusting the earphone volume 3. Troubleshooting 4. Battery information. 5. Care and maintenance..

2 Introduction Using the Bluetooth headset Oricore LB-58 will bring you a great convenience in communication, especially in mobile phones supporting Bluetooth files. Read this user guide carefully before using the headset. Read also the user guide for your phone, which provides important safety and maintenance information. Bluetooth wireless technology. Bluetooth wireless technology makes it possible to connect compatible communication devices without using cables. A Bluetooth connection does not require that the phone and the headset be in line of sight, but both devices should be within 10meters (30feet) of each other. Notes: Connection can be subject to interference from obstruction, such as walls or other electronic devices Oricore LB-58 is Bluetooth version 1.2 compliant. Before using it, please also check whether the mobile phone is Bluetooth compliant or not with its manufacturer and supplier. Getting started 1. Over view The headset contains the following parts as shown in the figures: Notes: Parts of the headset are magnetic, Metallic materials may be attracted to the headset. Do not place credit cards or other magnetic storage media near the headset, because information stored on them may be erased. 2.Charger Check the model number of any charger before using it with this device.the Bluetooth headset LB-58 is intended for use with the chargers that is included in the package. Notes: Using other incompliant chargers will betray the terms of Maintenance provision and result in a danger. For the supplying of the committed chargers, please enquiry your distributors. 3.Charging

3 This device has an internal, non-removable, rechargeable battery. Do not attempt to remove the battery from the device as you may damage the device. 1. Before the initial use of the Bluetooth headset, we suggest you to charge the battery fully. 2. Connect the charger cable to the charging socket of the headset and to the wall outlet. The blue indicator light is displayed during charging. 3. Make sure that your headset is fully charged for 2 hours before you start using it,when the battery is fully charged, the blue LED will turn off. Disconnect the charger from AC wall outlet (mains socket)and the headset. 4. The talk time of the fully charged charger is up to 7.5 hours while the stand by time is up to 180 hours. Notes: The talk and standby time may vary when use with different mobile phones, products that use a Bluetooth connection, usage settings, usage styles, and environments. When the battery power is insufficient, the headset will have a quick tone from time to time. At this point, please charge for the headset. We suggest to fully charge the Headset for at least one time in three months. Turning on the headset When being in a turned off station, please press and hold the MFB for 5 seconds, the LED will have 4 quick flashes in blue, that is to say the headset has been turned on. Turning off the headset When being in a turned on station, please press and hold the MFB for 8 seconds, the LED will have 4 quick flashes in blue, that is to say the headset has been turned off. Indicator light significations Headphones blue indicator blinks quickly, which indicates it s in a paring or there is a call coming in. Headphones blue indicator blinks quick for 10 times, which indicates matching headset successfully. The indicator flashes a time in blue every 3 seconds, which signifies the headset is in standby, not on the phone model. The indicator flashes a time in blue every 5 seconds, which signifies the headset is in connection, calling patterns. Pairing the headset with a compatible phone The pairing will be done wirelessly with encryption and point to point between two Bluetooth compliant equipments (such as between a Bluetooth compliant mobile phone and headset). 1. Put the Bluetooth headset in an obvious seen place and within a best operation range 1 meter. 2. make sure your headset is turned off 3. Press and hold the MFB for 8 seconds until the headset LED has a quick flash in blue and is to go into a paring condition. 4. Activate the Bluetooth feature on the mobile phone, and set the phone to search for Bluetooth devices. See the user guide of your mobile phone for instructions 5. Select the headset (LB06) from the list of found devices. 6. Enter the pass code 0000 to pair and connect the headset to your phone. Notes: When the pairing done, the indicator flashes in blue for 10 quick times and after that it will flash in blue a time every 3 seconds. If unsuccessful paring, the LED will still flash quickly or the mobile phones shows no Bluetooth devices. At this time, it needs re-pairing.

4 Connecting mobile phone automatically when turning on the headset After Bluetooth headset is switched on, it will automatically connect to the last pairing mobile phone. If the headset is still not connected with your mobile phone please press MFB once, the Bluetooth headset will connect the last paired mobile phone. Wearing the headset According to the habit of wearing headsets, headphones corresponding regulatory position Dialing by the headset Matching connected to the success of the method call is possible with the use of mobile phone operators set to another. Answering/Rejecting a call When there is a call coming in, the LED will flash in blue quickly, and the buzzer will sound regulary. To answer the call, Press the MFB once to accept the call or answer the call via your mobile phone in the normal way. To reject a call, please have a long press of the button until hear a du or use the mobile phone to reject. Redialing the last call When being connected and not in a call, have a long press of the until you hear an indication sound and then release, the headset is now redialing the last number. Voice dialing When your mobile phone supports the voice dialing function, please press the MFB a time until you hear a beep and then say the voice tag to voice dial. To reach the best effect, please use the Bluetooth headset to record the voice tag. Notes: Please confirm your mobile phone has recorded the voice tag before applying the voice tag function on your headset. Switching the earpiece to the mobile phone When being connected have a long press of the button and you can use the mobile phone to answer calls now, have a long press of the button again switching to the headset. Adjusting the earphone volume When using the headset, please press to increase the volume. When using the headset, please press to decrease the volume.

5 Troubleshooting If you cannot connect the headset to your phone, do as follows: 1. Ensure that the headset has been charged, switched on, paired with and connected to your phone. 2. Ensure that the Bluetooth feature is activated on your phone. 3. Check that the headset is within 10 meters (30 feet) of your phone and that there are no obstructions between the headset and the phone, such as walls or other electronic devices. 4.If the above steps do not solve your problem, please recharge the headset. And remove your mobile phone battery for a short time and then re-power on it. Battery information 1.Your device is powered by a rechargeable battery. The full performance of a new battery is achieved only after two of three complete charge and discharge cycles. The battery can be charged and discharged hundreds of times, but it will eventually wear out. Recharge your battery only with Compatible chargers designated for this device. 2.Unplug the charger from the electrical plug and the device when not in use. Do not leave a fully charged battery connected to a charger, since overcharging may shorten its lifetime. if left unused, a fully charged battery will lose its charge over time. 3.Never use any charger that is damaged. 4.Leaving the device in hot or cold places, such as,in a closed car in a summer or winter conditions, will reduce the capacity and lifetime of the battery. Always try to keep the battery between 15 and 25 (59ºF and 77ºF).A device with a hot or cold battery between may not work temporarily, even when the battery is fully charged. Battery performance is particularly limited in temperatures well below freezing. 5.Do not dispose of batteries in a fire as they may explode. Batteries may also explode if damaged. Dispose of batteries according to local regulations. 6.Please recycle then possible. Do not dispose as household waste Care and maintenance Your device is a product of superior design and craftsmanship and should be treated with care. The suggestion below will help you protect your warranty coverage 1.Keep all accessories and enhancements out of the reach of small children. 2.Keep the headset away from a dusty and dirty areas.. 3. Do not expose the headset to extreme temperature conditions. The best storage temperature range is from -10 to +60, or the life of the headset will be influenced. 4. Do not drop, knock, or shake the device.

6 5. Keep away the headset from incisive object or it will result in scratch and damage. 6. Do not use harsh chemicals, cleaning solvents, or strong detergents to clean the device. 7. Do not paint the device. Paint can clog the moving parts and prevent proper operation. 8. Do not expose the headset in liquid and humidity area. All of the above suggestions apply equally to your device, battery, charger, or any enhancement. If any device is not working properly, take it to the nearest authorized service facility. Compatibility Works with all Bluetooth-enabled phones and PDA. To know more our products information, please visit our website: Product specifications Version: 1.2 Bluetooth profile supported: Headset,Handsfree Range of frequency: Nominal charging time: GHz spectrum Within 2 hours Talk time: more than 7.5 hours

7 -12-