Abu Dhabi Certification Scheme for Assistant Engineer Assessment and Surveillance Plan for Assistant Engineer
|
|
- Peregrine Wood
- 5 years ago
- Views:
Transcription
1 Abu Dhabi Certification Scheme for Assistant Engineer Assessment and Surveillance Plan for Assistant Engineer Issue: 1.0 Date: 21/01/2018 Total Number of Pages: 12
2 Table of Contents ABOUT THE ABU DHABI QUALITY AND CONFORMITY COUNCIL 1. FOREWORD 2. REFERENCES 3. CERTIFICATION REQUIREMENTS 4. ASSESSMENT OF APPLICATIONS 5. IDENTIFICATION 6. SURVEILLANCE / AUDIT PROCEDURES 7. PUNITIVE ACTIONS 8. REQUEST FOR APPEAL I. APPENDIX 1: Glossary of Terms Page 2 of 12
3 Amendment Page To ensure that each controlled copy of this ASP contains a complete record of amendments, the Amendment Page is updated and issued with each set of revised/new pages of the document. Details of the procedures for amending this document are given in the foreword section of this document. Amendment Discard Insert No Date Sections Changed Page(s) Issue no Page(s) Issue no Comments 1 21/01/2018 Full document First edition Approved by: Saif Mohamed Al Bakeri Director System and Personnel Conformity Conformity Scheme Services Abu Dhabi Quality and Conformity Council Page 3 of 12
4 About the Abu Dhabi Quality and Conformity Council The Abu Dhabi Quality and Conformity Council (QCC) was established by law No. 3 of 2009, issued by His Highness Sheikh Khalifa Bin Zayed Al Nahyan, President of the UAE and Ruler of Abu Dhabi. QCC is responsible for the development of Abu Dhabi Emirate s Quality Infrastructure, which enables industry and regulators to ensure that products, systems and personnel can be tested and certified to UAE and International Standards. Certified personnel by QCC receive the Certificate of Conformity with the Abu Dhabi Trustmark. The Trustmark of the QCC is designed to communicate that a person or system conforms to various health, safety, performance and environmental standards that are set by Abu Dhabi regulators. 1 FOREWORD The Assistant Engineer Conformity Scheme was developed through consultation with regulators and industry. It enables individuals and firms offering electrical services to obtain voluntary certification that meet the Abu Dhabi requirements. The scheme has been specified for Assistant Engineer. QCC in its capacity as a conformity assessment body will provide third party conformity assessment to participants and objects. For clarification of terms and definitions, please refer to APPENDIX 2 A Trustmark and license will be granted to persons that achieve certification. The Trustmark may be used in conjunction with reference to the appropriate QCC information to market the services of the object. Certification is dependent on the successful completion of formal testing in accredited centres that fulfil the mentioned requirements (item 4.2). The Certificate of Conformity enables service providers to present evidence of meeting standards as specified for Abu Dhabi's qualifications framework. The Certificate of Conformity indicates that select objects skills meet standards as specified by Abu Dhabi and the UAE. The inspectors of the relevant regulators actively ensure that the integrity of the certificate is maintained through the inspection of work completed by certified objects. Page 4 of 12
5 2 REFERENCES 2.1 Standards Standards contain information on the skills required of applicants. The knowledge of the applicants must cover the skills stated in the occupational terms referred to below: UAE Technical Requirement Assistant Engineer Ability to analyze and define the engineering requirements through inspection and theoretical analysis Ability to prepare electrical drawings and diagrams considering the international standards and local code and regulations Ability to properly communicate all required information to the concerned project team members to take the proper actions Ability to collect and evaluate project related information and data in order to generate different types of engineering reports Confirm the adherence to health and safety requirements by all project team members Confirm the compliance with all project requirements and specifications from project initiation and up to projection handing over Codes of Practice Codes of practice are derived from the Abu Dhabi EHSMS and contain specific healthy and safety requirements as stated by the center. The CoPs may be found at: \ Abu Dhabi Occupational Safety and Health System Framework (OSHAD SF) 6.pdf Page 5 of 12
6 3 CERTIFICATION REQUIREMENTS 3.1 General requirements The general requirements are contained in the following QCC documents: Terms and conditions for general use of Trustmark Terms and conditions for certification of personnel and licence of the logo 3.2 Test Requirements In order to gain certification, the applicant shall pursue any of the options stated below for examination purposes necessary to complete the assessment plan: International testing centres Testing centres certified by awarding bodies recognized by ADQCC Test material must cover the requirements outlined in section The test report submitted must not be older than 12 months on the day of submission The assessor of the candidates must not be the same person that performed the training Assessor certification must meet the requirements set out in section , or in a course that is equivalent or higher than the course being assessed The centre must have record of audits performed on it by the certifying awarding body Must fulfil the requirements of ISO 9001 or show proof of an effective quality management system UAE testing centres Testing centres certified by awarding bodies recognized by ADQCC Test material must cover the requirements outlined in section The test report submitted must not be older than 12 months on the day of submission The assessor of the candidates must not be the same person that performed the training Page 6 of 12
7 Assessor certification must meet the requirements set out in sections , or in a course that is equivalent or higher than the course being assessed The centre must have record of audits performed on it by the certifying awarding body Centre must be licensed by KHDA, ACTIVET of the equivalent in other emirates if applicable Centre must have a UAE business license if the centre functions in a commercial capacity Must fulfil the requirements of ISO 9001 or show proof of an effective quality management system Independent Test Centres Recognized by ADQCC Centre must be licensed by KHDA, ACTVET of the equivalent in other Emirates if applicable Centre must have a UAE business license if the centre functions in a commercial capacity Must fulfil the requirements of ISO 9001 or show proof of an effective quality management system Test material must cover the requirements outlined in section The test report submitted must not be older than 12 months on the day of submission The assessor of the candidates must not be the same person that performed the training Assessor certification must meet the requirements set out in sections , or in a course that is equivalent or higher than the course being assessed 4 ASSESSMENT OF APPLICATIONS The assessment is based on the submitted documents (Individual application, complete test results and identification documents), which are evaluated for compliance to referenced standards as well as consistency, completeness and overall quality. 4.1 Successful certification is dependent on the successful completion of tests that meet the requirements mentioned above. 4.2 Successful completion of tests that adhere to section 4.2 of the scheme is the primary requirement of QCC certification Page 7 of 12
8 5 IDENTIFICATION Identification is necessary for the verification of the identities of applicants and to ensure effective service to applicants 5.1 Within the UAE Each person applying for certification must provide clear and legible copies of government issued Emirates ID 5.2 International applicant An application coming from international centres will only be processed once applicants submit government issued identification. The government issued identification in this case will be a passport copy The certification of international applicants will be tentative pending the submission of Emirates ID 6 SURVEILLANCE / AUDIT PROCEDURES Surveillance is in place to ensure that test centres and individuals comply with the test criteria set out in section 4.2 of this document and the acceptable performance levels. 6.1 General test centres The surveillance and audit requirements listed under this section shall be applied to the test centres or awarding bodies. The validity of a certificate may be required to be demonstrated; this may include the validity of the accreditation of the issuer Continued proof of certification is required for continued QCC acceptance 6.2 Quality Management System (QMS) Audits test centres Proof of continued compliance (certification) is to be presented to QCC when required or 60 days after expiry of the submitted ISO 9001 certification (whichever comes first). 6.3 Individuals Inspection on the performance of individuals will be conducted by the relevant regulatory/security authorities Any incident during the service provided will open the Assistant Engineer to a performance review Assistant Engineer may be held liable if inadequate performance or carelessness is determined to cause harm to property or person Page 8 of 12
9 7 PUNITIVE ACTIONS Punitive actions are taken against centres that break the requirements outlined by the document. 7.1 Declaration of Conformity Breach of the signed declaration of compliance will result in a lifetime ban of said testing centre from all QCC certification schemes present and future 7.2 Certification requirements Failure to meet the stated requirements will result in failure of application into QCC certification schemes until said requirement is met Failure to renew certification stated in section 4 will result in a temporary block on acceptance until the required certification is once again met 8 REQUEST FOR APPEAL Appeals may be made through direct contact of the QCC in any of the three cases stated below: 8.1 Application rejection If an application is rejected, the reason for rejection will be submitted to the concerned party If the concerned party wishes to object to the rejection, it should contact the QCC with all supporting documentation. The appeal will be reviewed and the rejection may be withdrawn if satisfactory The rejection will be on hold within the 12 month period of the certifications should there be any missing documents. Once the missing documents are submitted, the application will be processed again. If the material is handed in after the 12 months stated period, the application will be rejected and the applicant must re apply 8.2 Centre recognition rejection A centre may be rejected from the approved centres list if it does not meet the criteria stated in this document The reason for rejection will be made clear to the applying test centre If a centre believes it is wrongfully rejected it may appeal the decision with supporting documents 8.3 Punitive Action A punitive action will only be taken for breaches of the requirements The reason for punitive action will be made clear to the concerned body Page 9 of 12
10 8.3.3 If a centre believes it has been unfairly punished, it may appeal with supporting documents If the centre corrects the actions that has led to punitive action, it may reapply for approval status with supporting documentation Page 10 of 12
11 I. APPENDIX 1: GLOSSARY OF TERMS (All definitions are derived from ISO and ISO The final three are occupation definitions) 1. Object a particular material, product, service, installation, process, system, person or body in the context of conformity assessment 2. Body refers to conformity assessment bodies or accreditation bodies. Otherwise, the term organization is used in its general meaning, as in the ISO 9000 definition 3. Conformity assessment demonstration that specified requirements relating to a product, process, system, person or body are fulfilled 4. First party conformity assessment conformity assessment activity that is performed by the person or organization that provides the object 5. Second party conformity assessment conformity assessment activity that is performed by a person or organization that has a user interest in the object 6. Third party conformity assessment conformity assessment activity that is performed by a person or body that is independent of the person or organization that provides the object, and of user interests in that object 7. Conformity assessment body body that performs conformity assessment services (an accreditation body is not a conformity assessment body) 8. Accreditation body authoritative body that performs accreditation 9. conformity assessment system rules, procedures and management for carrying out conformity assessment 10. Conformity assessment scheme/program conformity assessment system related to specified objects of conformity assessment, to which the same specified requirements, specific rules and procedures apply 11. Participant body that operates under the applicable rules without having the opportunity to take part in the management of the system or scheme 12. Review verification of the suitability, adequacy and effectiveness of selection and determination activities, and the results of these activities, with regard to fulfilment of specified requirements by an object of conformity assessment 13. Attestation issue of a statement, based on a decision following review, that fulfilment of specified requirements has been demonstrated. The resulting statement is a statement of conformity, it conveys the assurance that the specified requirements have been fulfilled. Such an assurance does not, of itself, afford contractual or other legal guarantees. 14. Certification third party attestation related to products, processes, systems or persons Page 11 of 12
12 15. Accreditation third party attestation related to a conformity assessment body conveying formal demonstration of its competence to carry out specific conformity assessment tasks 16. Suspension temporary invalidation of the statement of conformity for all or part of the specified scope of attestation 17. Withdrawal revocation cancellation of the statement of conformity 18. Appeal request by the provider of the object of conformity assessment to the conformity assessment body or accreditation body for reconsideration by that body of a decision it has made relating to that object 19. Equivalence equivalence of conformity assessment results sufficiency of different conformity assessment results to provide the same level of assurance of conformity with regard to the same specified requirement Page 12 of 12
Abu Dhabi Certification Scheme for Pool Lifeguard Assessment and Surveillance Plan for Pool Lifeguard
Abu Dhabi Certification Scheme for Pool Lifeguard Assessment and Surveillance Plan for Pool Lifeguard Issue: 1.0 Date: 01/09/2015 Total Number of Pages: 12 Table of Contents ABOUT THE ABU DHABI QUALITY
More informationAbu Dhabi Certification Scheme for Beauty Salon Sector
Abu Dhabi Certification Scheme for Beauty Salon Sector Hairstylist Assessment and Surveillance Plan for Beauty Salon Sector Hairstylist Issue: 1.0 Date: 27/11/2016 Total Number of Pages: 12 Table of Contents
More informationPRODUCT CERTIFICATION SCHEME FOR MECHANICAL-CUSTOMIZED VEHICLES
Ref No: RACS/SOP/57 Page 1 of 6 1. Objective: This procedure describes the criteria implemented by RACS as Notified Body of Emirates Authority of Standardization and Metrology (ESMA) that Mechanical Customized
More informationPersonnel Certification Program
Personnel Certification Program ISO 9001 (QMS) / ISO 14001 (EMS) Form PC1000 Last Updated 9/11/2017 Page 1 of 14 INDEX Auditor Certification Quality or Environmental Program Pg 3-4 Certification Status
More informationPRODUCT CERTIFICATION SCHEME FOR ENERGY DRINKS
Ref No: RACS/PCS/11 Page 1 of 6 1. Objective: This procedure describes the criteria implemented by RACS as Notified Body of Emirates Authority of Standardization and Metrology (ESMA) that Energy Drinks
More informationSIRIM QAS International Sdn. Bhd.
SIRIM QAS International Sdn. Bhd. epcs/doc/01-1.1 ECO-LABELLING CERTIFICATION SCHEME INTRODUCTION Any manufacturer or company may apply to SIRIM QAS International Sdn. Bhd. to have a product certified
More informationSIRIM QAS International Sdn. Bhd.
SIRIM QAS International Sdn. Bhd. ECO-LABELLING CERTIFICATION SCHEME INTRODUCTION Any manufacturer or company may apply to SIRIM QAS International Sdn. Bhd. to have a product certified to the requirements
More informationScheme Document SD 003
Scheme Document SD 003 Management Systems (ISO 9001, ISO 14001, BS OHSAS 18001 & PN111 Factory Production Control) SD 003 Rev 03.6 10 Oct 2013 Page 1 of 13 (blank) SD 003 Rev 03.6 10 Oct 2013 Page 2 of
More informationISO/IEC :2015 IMPACT ON THE CERTIFIED CLIENT
ISO/IEC 17021-1:2015 IMPACT ON THE CERTIFIED CLIENT P R E S E N T E D B Y S H A N N O N C R A D D O C K, P R O G R A M S & A C C R E D I T A T I O N S M A N A G E R TODAY S APPROACH What is ISO/IEC 17021-1:2015?
More information20 February Accreditation of Assessment Centres
20 February 20 Accreditation of Assessment Centres Policy Name Accreditation of Assessment Centres Document number AAC-001/ Responsible Executive Chief Director: Occupational Qualifications Quality Assurance
More informationCNAS-RC01. Rules for Accreditation of Certification Bodies
CNAS-RC01 Rules for Accreditation of Certification Bodies CNAS CNAS-RC01:2014 Page 1 of 25 Foreword... 2 1 Scope... 3 2 Reference Documents... 3 3 Terms and Definitions... 3 4 General... 5 5 Accreditation
More informationPRODUCT CERTIFICATION SCHEME FOR ORGANIC PRODUCTS
Ref No: RACS/SOP/36 Page 1 of 6 1. Objective: This procedure describes the criteria implemented by RACS as Notified Body of Emirates Authority of Standardization and Metrology (ESMA) to assure that Organic
More informationQCTO Policy on Accreditation of Assessment Centres
QCTO Policy on Accreditation of Assessment Centres Approved 20 February 2013 QCTO AAC-001/13 Policy on Accreditation of Assessment Centres Page 1 TABLE OF CONTENTS List of acronyms... 3 Glossary... 4 Preamble...
More informationCertification Description of Malaysia Sustainable Palm Oil (MSPO) Standard
The certification of a management system based on standard Malaysia Sustainable Palm Oil Standard (MSPO) respectively, consists of the offer and contract phase, the audit preparation, performance of the
More informationElectricity Sector Process Flow
Electricity Sector Process Flow Electricity Sector Background Any contractor that provide electrical works (internal wiring) services in the emirate of Abu Dhabi, must obtain their license from either
More informationPRODUCT CERTIFICATION SCHEME FOR WATER PRODUCTS
Ref No: RACS/SOP/31 Page 1 of 6 1. Objective: This procedure describes the criteria implemented by RACS as Notified Body of Emirates Authority of Standardization and Metrology(ESMA) to assure that Water
More informationRules for LNE Certification of Management Systems
Rules for LNE Certification of Management Systems Application date: March 10 th, 2017 Rev. 040716 RULES FOR LNE CERTIFICATION OF MANAGEMENT SYSTEMS CONTENTS 1. PURPOSE... 3 2. SCOPE... 3 3. DEFINITION
More informationUSDA ISO Guide 65 Program Accreditation for Certification Bodies
Page 1 of 6 USDA ISO Guide 65 Program Accreditation for Certification Bodies 1 Purpose This document provides the requirements to be met in designing a USDA ISO Guide 65 Program. It also provides the requirements
More informationPRODUCT CERTIFICATION SCHEME FOR CHILDREN TOYS
Ref No: RACS/PCS/22 Page 1 of 8 1. Objective: This procedure describes the criteria implemented by RACS as Notified Body of Emirates Authority of Standardization and Metrology (ESMA) that Children Toys
More informationGlobal Wind Organisation CRITERIA FOR THE CERTIFICATION BODY
Global Wind Organisation CRITERIA FOR THE CERTIFICATION BODY December 2015 (Version 3) 1 Contents 1. Introduction... 5 2. Criteria for approval of a Certification Body... 5 3. Selection of audit team members
More informationCIVIL AVIATION REQUIREMENT SECTION 2 - AIRWORTHINESS SERIES E PART XII EFFECTIVE : FORTHWITH
GOVERNMENT OF INDIA OFFICE OF THE DIRECTOR GENERAL OF CIVIL AVIATION TECHNICAL CENTRE, OPP SAFDURJUNG AIRPORT, New Delhi CIVIL AVIATION REQUIREMENT SECTION 2 - AIRWORTHINESS SERIES E PART XII, 2017 EFFECTIVE
More informationPRODUCT CERTIFICATION SCHEME FOR METROLOGY SYSTEM
Ref No: RACS/PCS/20 Page 1 of 8 1. Objective: This procedure describes the criteria implemented by RACS as Notified Body of Emirates Authority of Standardization and Metrology (ESMA) that Metrology System
More informationAbu Dhabi Occupational Safety and Health System Framework (OSHAD-SF) Mechanisms
Abu Dhabi Occupational Safety and Health System Framework (OSHAD-SF) Mechanisms Mechanism 7.0 - OSH Professional Entity Registration Version 3.0 July 2016 Table of Contents 1. Introduction...4 1.1 Overview
More informationS. Scholz / K. Meyer / J.E. Nielsen / Harald Drück/J.Fernández/E.Prado/L.Nelson Page 1 of 7
Global Solar Certification Network Working Rules Annex A. Requirements for Certification Bodies and their subcontracted laboratories, inspection bodies and inspectors Date: 2017/03/07 Document number:
More informationCertification Process Overview
Certification Process Overview 1. General: TUV India Pvt. Ltd (TUV) is a part of TUV NORD Group and provides system certification services. This overview is to give the idea of steps involved in certification,
More informationPEFC Certification System Netherlands - Certification Procedures
PCSN SCHEME DOCUMENT PCSN IV Issue 2 10-03-2017 PEFC Certification System Netherlands - Certification Procedures PEFC Netherlands Kokermolen 11 3994 DG Houten The Netherlands Tel: +31 30 693 0040 Fax:
More informationAccreditation Body Evaluation Procedure for AASHTO R18 Accreditation
Accreditation Body Evaluation Procedure for AASHTO R18 Accreditation Final August 9, 2016 Page 1 of 12 Section Number Table of Contents Title of Section 0 Purpose 1 Scope 2 References 3 Objectives 4 Criteria
More informationISO/IEC 17065:2012 VERTICAL/FILE REVIEW ASSESSMENT
F 136-04 ISO/IEC 17065:2012 SANAS Accr. No/s. VERTICAL/FILE REVIEW ASSESSMENT Organisation Organisation Representative Date: Area / field of operation Accreditation standard Assessor Signed Lead Assessor:
More informationRegulation for the accreditation of product Certification Bodies
Title Reference Regulation for the accreditation of product Certification Bodies RG-01-03 Revision 00 Date 2014-04-14 Preparation Approval Authorization of issue Application date Director of the Dept.
More informationRFM Procedure 3: Certification Body Approval for Chain of Custody Standard. Alaska Responsible Fisheries Management (RFM) Certification Program 17065
RFM Procedure 3: Certification Body Approval for Chain of Custody Standard Alaska Responsible Fisheries Management (RFM) Certification Program 17065 RFM Version 4, Jan 2018 1 1.0 Purpose This document
More informationMinimum Requirements For The Operation of Management System Certification Bodies
ETHIOPIAN NATIONAL ACCREDITATION OFFICE Minimum Requirements For The Operation of Management System Certification Bodies April 2011 Page 1 of 11 No. Content Page 1. Introduction 2 2. Scope 2 3. Definitions
More informationScheme Document. For more information or help with your application contact BRE Global on +44 (0) or
Page: Page 1 of 15 1. Introduction This certification scheme has been designed to promote sustainable production of construction products and materials. Responsible sourcing includes organisational management,
More informationThis is a preview - click here to buy the full publication. IEC Quality Assessment System for Electronic Components (IECQ System)
IECQ 03-3-1 Edition 1.0 2013-02 IECQ PUBLICATION IEC Quality Assessment System for Electronic Components (IECQ System) Rules of Procedure Part 3-1: IECQ Approved Component Products, Related Materials &
More informationCERTIFICATION GUIDELINES FOR MANAGEMENT SYSTEM
CERTIFICATION GUIDELINES FOR MANAGEMENT SYSTEM Table of Content 1.0 INTRODUCTION... 2 2.0 CERTIFICATION PROCESS... 2 3.0 SCHEDULE OF FEES... 3 4.1 CERTIFICATION REQUIREMENTS... 3 4.2 Eligibility criteria
More informationPRODUCT CERTIFICATION SCHEME FOR FOOD-HONEY PRODUCTS
Ref No: RACS/PCS/14 Page 1 of 7 1. Objective: This procedure describes the criteria implemented by RACS as Notified Body of Emirates Authority of Standardization and Metrology (ESMA) to assure that Honey
More informationRef No: RACS/PCS/10 Page 1 of 7. Revision No: 00 Revision Date: October 1, 2018 PRODUCT CERTIFICATION SCHEME FOR ELECTRICAL EQUIPMENT
Ref No: RACS/PCS/10 Page 1 of 7 1. Objective: This procedure describes the criteria implemented by RACS as Notified Body of Emirates Authority of Standardization and Metrology (ESMA) to assure that Electrical
More informationDOCUMENT NO. CSWIP-PED Requirements for the approval of NDT Personnel CERTIFICATION SCHEME FOR PERSONNEL. 2 nd Edition January 2011
CERTIFICATION SCHEME FOR PERSONNEL DOCUMENT NO. CSWIP-PED -2-01 Requirements for the approval of NDT Personnel 2 nd Edition January 2011 Issued under the authority of the Governing Board for Certification
More informationAPPROVAL PROCESS TO BE FOLLOWED FOR PROVISIONAL ACCREDITATION OF CBs UNDER FM CERTIFICATION SCHEME
APPROVAL PROCESS TO BE FOLLOWED FOR PROVISIONAL ACCREDITATION OF CBs UNDER FM CERTIFICATION SCHEME Contents Scope... 3 A. Application for the Notification of the Certification Body... 3 B. Approval from
More informationCNAS-RC02. Rules for Sanctions against the Accreditation of Certification Bodies
CNAS-RC02 Rules for Sanctions against the Accreditation of Certification Bodies CNAS CNAS-RC02:2014 Page 1 of 7 Foreword This document is developed by CNAS. This document specifies rules for sanctions
More informationACCREDITATION CRITERIA FOR MANAGEMENT SYSTEM CERTIFICATION BODIES ISSUE NO : 01 ISSUE DATE : 17/01/2015 PREFACE
International Standards Accreditation Council No.14, M.T.H Road, Opp to Vivekananda School, Vivekananda Nagar, Ambattur, Chennai 600 053. Tamil Nadu, India. Tel : 044 65554660 Email : info@isacglobal.org
More informationCertification program PCWU-3
The certification program of utility products type 3 of the certification program according to PN-EN ISO/IEC 17067 Number: Page: 1 z 8 MS-0013527 Is valid from: 01.03.2016 Prepared: Tomasz Marcinek Approved:
More informationCISI Membership Policy: CERTIFIED FINANCIAL PLANNER (CFP TM )
CISI Membership Policy: CERTIFIED FINANCIAL PLANNER (CFP TM ) This policy relates to the process for voting members to obtain and maintain the Certified Financial Planner TM Certification 1.1 Certified
More informationPROTERRA CERTIFICATION PROTOCOL V2.2
PROTERRA CERTIFICATION PROTOCOL V2.2 TABLE OF CONTENTS 1. Introduction 2. Scope of this document 3. Definitions and Abbreviations 4. Approval procedure for Certification Bodies 5. Certification Requirements
More informationORDINANCE ON EMPLOYMENT PROMOTION (AZAV) INFORMATION SECURITY MANAGEMENT SYSTEMS ACCORDING TO DIN ISO/IEC (INCL. IT SECURITY CATALOGUE)
Audit and Certification Process of GUTcert for QUALITY MANAGEMENT SYSTEMS ACCORDING TO ISO 9001 ENVIRONMENTAL MANAGEMENT SYSTEMS ACCORDING TO ISO 14001 ENERGY MANAGEMENT SYSTEMS ACCORDING TO ISO 50001
More informationProcess for the Evaluation and Acceptance of Building Products in the USA
Process for the Evaluation and Acceptance of Building Products in the USA Rick Okawa, P.E. Deputy Vice President of Global Services and Business Development An Integrated Building System Product Certification
More informationSLOVAK FOREST CERTIFICATION SYSTEM September 1, 2008
SLOVAK FOREST CERTIFICATION SYSTEM September 1, 2008 REQUIREMENTS FOR CERTIFICATION BODIES CONDUCTING FOREST CERTIFICATION AND CHAIN - OF - CUSTODY OF WOOD VERIFICATION SFCS 1005:2004 Effective as of September
More informationCertification Scheme
Certification Scheme Sustainable Biomass according to ISCC certification system (Edition: January 2017) DIN CERTCO Alboinstraße 56 12103 Berlin Tel: +49 30 7562-1131 Fax: +49 30 7562-1141 E-Mail: info@dincertco.de
More informationTURKISH STANDARDS INSTITUTION
TURKISH STANDARDS INSTITUTION NEW GLOBAL OLD APPROACH REGULATIONS CONFORMITY ASSESSMENT PROCEDURES AND PRINCIPLES Board Decision : 29.04.2014 Date 50.-236 Validity date : 05.05.2014 CHAPTER ONE Objective,
More informationAUDITOR / LEAD AUDITOR PHARMACEUTICAL AND MEDICAL DEVICE INDUSTRY
Requirement specification Certification of individuals: AUDITOR / LEAD AUDITOR PHARMACEUTICAL AND MEDICAL DEVICE INDUSTRY Requirement specification Auditor Lead Auditor rev 5.docx Page 1 1 Introduction
More informationAccreditation of Product Certification Scheme for Construction Materials By Ir C K Cheung Hong Kong Accreditation Service
Accreditation of Product Certification Scheme for Construction Materials By Ir C K Cheung Hong Kong Accreditation Service 1. Overview of HKAS Originated as an accreditation scheme called HOKLAS in 1985
More informationPRODUCT CERTIFICATION SCHEME FOR MILK AND DAIRY PRODUCTS
Ref No: RACS/PCS/16 Page 1 of 8 1. Objective: This procedure describes the criteria implemented by RACS as Notified Body of Emirates Authority of Standardization and Metrology (ESMA) to assure that Milk
More informationAsureQuality Limited. CodeMark Programme. Certificate Holder Responsibilities and Requirements
AsureQuality Limited CodeMark Programme Certificate Holder Responsibilities and Requirements Page 1 of 6 1. SCOPE This document describes the responsibilities and requirements of Certificate Holders for
More informationNational Accreditation Scheme
National Accreditation Scheme Rules of Procedure on the Preparation of Accreditation Audit Cycle NAR-25 Edition 3 Version 1 Approved by: Csaba Bodroghelyi Deputy Director General Responsible for preparation:
More informationHKICA-CC01 Certification Criteria CERTIFICATION SCHEME OF QUALITY MANAGEMENT SYSTEM AUDITOR (CSQMSA)
HKICA-CC01 Certification Criteria 1 CERTIFICATION SCHEME OF QUALITY MANAGEMENT SYSTEM AUDITOR (CSQMSA) HKICA-CC01 Criteria established based on IPC (BD-05-007) Specification for the Development of Examinations
More informationInhalt. Description of Certification Procedure ISO 22000, HACCP and DIN 15593
Inhalt 1. CERTIFICATION PROCEDURE... 2 1.1 Audit Preparation... 2 1.2 Audit Stage 1... 2 1.3 Audit Stage 2 Certification Audit... 3 1.4. Issue of Certificate... 3 2. SURVEILLANCE AUDIT... 3 3. RECERTIFICATION
More informationCERTIFICATE SCHEME THE MATERIAL HEALTH CERTIFICATE PROGRAM. Version 1.1. April 2015
CERTIFICATE SCHEME For THE MATERIAL HEALTH CERTIFICATE PROGRAM Version 1.1 April 2015 Copyright Cradle to Cradle Products Innovation Institute, 2015 1 Purpose The intention of the Certificate Scheme is
More informationIEC Quality Assessment System for Electronic Components (IECQ System)
IECQ 03-4 Edition 2.0 2012-09 IECQ PUBLICATION IEC Quality Assessment System for Electronic Components (IECQ System) Rules of Procedure Part 4: IECQ ECMP Scheme Avionics Assessment Program Requirements
More informationGLOBAL MANAGEMENT CERTIFICATION SERVICES PRIVATE LIMITED PROCEDURE
GLOBAL MANAGEMENT CERTIFICATION SERVICES PRIVATE LIMITED Document No. P-04 PROCEDURE Version. 2.00 Granting, Maintaining, Extending, Reducing, Date of Issue 04.04.2016 Reviewed & Approved By Name Designation
More informationAreas of impact for client consideration taken from the Rules for achieving IATF recognition Third edition for ISO/TS
Areas of impact for client consideration taken from the Rules for achieving IATF recognition Third edition for ISO/TS 16949 June 2009 1 Matrix of areas of impact on the client: Clause Area of impact content
More informationChecklist According to ISO IEC 17065:2012 for bodies certifying products, process and services
Name of Certifying Body Address of Certifying Body Case number Date of assessment With several locations Yes No Assessed locations: (Name)/Address: (Name)/Address: (Name)/Address: Assessed area (technical
More informationReady Mix Concrete Plant Certification Scheme (RMCPCS)
Ready Mix Concrete Plant Certification Scheme (RMCPCS) Provisional Approval System for Certification Bodies Issue 1.0 / May 2013 Ready Mix Concrete Plant Certification Scheme (RMCPCS) Provisional Approval
More informationDescription of the certification procedure MS - ISO 9001, MS - ISO 14001, MS - ISO/TS and MS BS OHSAS 18001, MS - ISO 45001, MS - ISO 50001
The certification of a management system based on standard ISO 9001, ISO 14001, ISO/TS 29001, BS OHSAS 18001, ISO 45001 or ISO 50001, consists of the offer and contract phase, the audit preparation, performance
More informationNetwork Certification Body
Network Certification Body Scheme rules for assessment of railway projects to requirements of the Railways Interoperability Regulations as a Notified and Designated Body 1 NCB_MS_56_Notified and Introduction
More informationAreas of impact for client consideration taken from the Rules for achieving and maintaining IATF recognition 4 th Edition for ISO/TS 16949
Areas of for client consideration taken from the Rules for achieving and maintaining IATF recognition 4 th Edition for ISO/TS 16949 1 st February 2014 1 Foreword Introduction The IATF recognizes certification
More informationReproduced by Sabinet Online in terms of Government Printer s Copyright Authority No dated 02 February 1998 DEPARTMENT OF TRADE AND INDUSTRY
26 No. 37654 GOVERNMENT GAZETTE, 23 MAY 2014 DEPARTMENT OF TRADE AND INDUSTRY No. R. 379 23 May 2014 NATIONAL REGULATOR FOR COMPULSORY SPECIFICATIONS ACT (Act 5 of 2008) AMENDMENT OF THE COMPULSORY SPECIFICATION
More informationBRE Global Limited Scheme Document SD 186: Issue No December 2017
BRE Global Limited Scheme Document SD 186: Issue No. 11.1 Commercial-in-Confidence Page 1 of 9 Introduction This certification scheme has been designed to promote the use of sustainable materials and
More informationRequirements for the Certification of a Welding Quality Control Co-ordinator
CERTIFICATION SCHEME FOR PERSONNEL DOCUMENT No. CSWIP- QCC-20-08 Requirements for the Certification of a Welding Quality Control Co-ordinator 2 nd Edition January 2011 Issued under the authority of the
More informationProt. DC2018SSV120 Milano, To all Certification Bodies (CBs) with OH&S accreditation. To the associations of Conformity Assessment Bodies
Prot. DC2018SSV120 Milano, 22-03-2018 To all Certification Bodies (CBs) with OH&S accreditation To the associations of Conformity Assessment Bodies Subject: Department of Certification and Inspection informative
More informationManagement System Auditors Criteria. CRT 6.7 Quality Management System Auditor
Management System Auditors Criteria CRT 6.7 Quality Management System Auditor Revision 8 Issue Date 2018-03-01 Application Date Effective 2018-03-01 Transition period Refer to the transition section of
More informationPEFC N 04 Requirements for certification bodies and accreditation bodies
PEFC N 04 Requirements for certification and accreditation Organisation Articles of Association for PEFC Norway Forest certification PEFC N 01 Norwegian PEFC certification system for sustainable forestry
More informationPRODUCT CERTIFICATION SCHEME FOR DETERGENT PRODUCTS
Ref No: RACS/PCS/03 Page 1 of 7 1. Objective: This procedure describes the criteria implemented by RACS as Notified Body of Emirates Authority of Standardization and Metrology (ESMA) to assure that Detergents
More informationEA-7/05 - EA Guidance on the Application of ISO/IEC 17021:2006 for Combined Audits
Publication Reference EA-7/05 EA Guidance on the Application of ISO/IEC 17021:2006 for Combined Audits PURPOSE This document has been prepared by a task force under the direction of the European Cooperation
More informationChecklist According to ISO IEC 17024:2012 for Certification Bodies for person
Name of Certifying Body Address of Certifying Body Case number Date of assessment With several locations Yes No Assessed locations: (Name)/Address: (Name)/Address: (Name)/Address: Assessed area (technical
More informationInformation technology Security techniques Requirements for bodies providing audit and certification of information security management systems
Provläsningsexemplar / Preview INTERNATIONAL STANDARD ISO/IEC 27006 Third edition 2015-10-01 Information technology Security techniques Requirements for bodies providing audit and certification of information
More informationISO/IEC INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO/IEC 27006 Second edition 2011-12-01 Information technology Security techniques Requirements for bodies providing audit and certification of information security management systems
More information2 ACCREDITED AUDITORS
2 ACCREDITED AUDITORS 2.1 Auditor Accreditation 2.1.1 IBAC will issue auditor accreditation and appropriate credentials to individuals that apply for such accreditation and who meet the requirements established
More informationPRODUCT CERTIFICATION SCHEME FOR OXO-BIODEGRADABLE PLASTIC
Ref No: RACS/PCS/06 Page 1 of 8 1. Objective: This procedure describes the criteria implemented by RACS as Notified Body of Emirates Authority of Standardization and Metrology (ESMA) that Oxo-biodegradable
More informationSİGMACERT ULUSLARARASI BELGELENDİRME EĞİTİM TEST HİZMETLERİ LTD. ŞTİ.
SİGMACERT ULUSLARARASI BELGELENDİRME EĞİTİM TEST HİZMETLERİ LTD. ŞTİ. YS.PR.01 Certification Procedure (Revision 01 03.05.2017) Written by Reviewed & Authorized by Date: Date: CONTENT PAGE NO. A. Objective
More informationIndonesia - SNI Certification Service Terms
Indonesia - SNI Certification Service Terms These Service Terms shall govern the Indonesian National Standard ( SNI ) Certification Services performed by the UL Contracting Party (as identified in the
More information2 ACCREDITED AUDITORS
2 ACCREDITED AUDITORS 2.1 Auditor Accreditation 2.1.1 IBAC will issue auditor accreditation and appropriate credentials to individuals that apply for such accreditation and who meet the requirements established
More informationCERTIFICATION POLICY
CERTIFICATION POLICY Table of contents 1. Background... 3 1.2 Definitions... 3 1.3 Application and Scope... 5 2. Statement of Policy Intent... 6 3. General requirement... 7 4. Issue of certificates...
More informationSCI QUAL INTERNATIONAL PTY LTD ENQUIRY & APPLICATION/RENEWAL FORM FOR CERTIFICATION
SCI QUAL INTERNATIONAL PTY LTD ENQUIRY & APPLICATION/RENEWAL FORM FOR CERTIFICATION PART 1 - ENQUIRY Note: If our quotation is accepted we will send you a copy of this form for you to sign and return as
More informationGUIDELINE. of the European Committee for Welding of Railway Vehicles (ECWRV) ( ) PART 1
GUIDELINE of the European Committee for Welding of Railway Vehicles (ECWRV) (2016-05-10) PART 1 Procedure for the application of EN 15085 and certification of welding manufacturers for welding railway
More informationProcedure for the Recognition of Foreign Testing Laboratories
Issue 6 Amendment May 2018 Spectrum Management and Telecommunications Procedures for Conformity Assessment Bodies Procedure for the Recognition of Foreign Testing Laboratories Amendment: The definition
More informationPolicies and Procedures Ski Lift Mechanic Certification Program
Ski Lift Mechanic Certification Program (under Ontario Regulation 222/01 & Director s Order #170/02, Technical Standards & Safety Act, 2000) www.tssa.org (Uncontrolled document if printed) Page 1 Ski Lift
More informationCERTIFICATION BODY (CB) APPROVAL REQUIREMENTS FOR THE IFFO RESPONSIBLE SUPPLY (IFFO RS) AUDITS AND CERTIFICATION
CERTIFICATION BODY (CB) APPROVAL REQUIREMENTS FOR THE IFFO RESPONSIBLE SUPPLY (IFFO RS) AUDITS AND CERTIFICATION Introduction The IFFO RS Certification Programme is a third party, independent and accredited
More informationReliable Quality Assurance Pvt. Ltd.
1. Introduction: This document defines the procedure that has to be followed by the organizations seeking certification and also certified organizations for Food Safety Management Systems (ISO 22000:2005).
More informationNational Accreditation Board for Certification Bodies
BCB 160-Dec 2016 Accreditation Criteria For Trustworthy Digital Repository Certification Bodies BCB 160 Dec 2016 Date Effective - 1 Jan 2017 Accreditation Criteria for TDRCBs (BCB 160 Dec 2016) Page 1
More informationProcedure for Issue and Withdrawal of Certificates
IC/PR/11- Rev.01 Pages: 1/6 Procedure for Issue and Withdrawal of Certificates Inter Cert Pvt. Ltd. C-46, Ground Floor, Sector 10, Noida 201301, U.P., India Tel: +91-120-4542204, 4542205, Fax: 91-120-4542205
More information"Energy and Ecological Transition for the Climate" Label Control and Monitoring Plan Guidelines
MINISTRY OF ENVIRONMENT, ENERGY AND THE SEA "Energy and Ecological Transition for the Climate" Label Control and Monitoring Plan Guidelines Contents FOREWORD... 3 INTRODUCTION... 4 I. INITIAL CERTIFICATION
More informationPRIOR LEARNING ASSESSMENT AND RECOGNITION (PLAR)
PRIOR LEARNING ASSESSMENT AND RECOGNITION (PLAR) 1. INTRODUCTION 1.1 Purpose of the Guidelines These guidelines have been developed by TVETA to guide TVET Providers on how to: (i) Prepare, plan, and implement
More informationDescription of the TÜV NORD CERT certification procedure GMP+ FC (Feed Certification scheme) of GMP+ International B.V. (NL)
Certific ation Table of contents 1 CERTIFICATION PROCEDURE... 3 1.1 Audit Preparation... 3 1.2 Establishment of readiness for certification... 3 1.3 Temporary approval... 3 1.4 Audit Stage 2 Certification
More informationGlobal Wind Organisation CRITERIA S FOR THE CERTIFICATION BODY
Global Wind Organisation CRITERIA S FOR THE CERTIFICATION BODY CONTENTS PAGE Foreword 3 1. Introduction 4 2. Criteria for approval of Certification Body 4 3. Selection of audit team members certifying
More informationKENYA ACCREDITATION SERVICE
KENAS-GUD-010 01 22/06/2013 22/07/2013 GUD 1 of 9 Approval and Authorisation Completion of the following signature blocks signifies the review and approval of this Document. Name Job Title / Role Signature
More informationPolicy for Accrediting Assessment Bodies Operating within the Cradle to Cradle Certified Product Certification Scheme. Version 1.2
Policy for Accrediting Assessment Bodies Operating within the Cradle to Cradle Certified Product Certification Scheme Version 1.2 July 2015 Copyright, Cradle to Cradle Products Innovation Institute, 2015
More informationIAF Mandatory Document for the Transfer of Accredited Certification of Management Systems
IAF MD 2:2007. International Accreditation Forum, Inc. IAF Mandatory Document IAF Mandatory Document for the Transfer of Accredited Certification of Management Systems (IAF MD 2:2007) IAF MD2:2007 International
More informationAudit and Certification Process of GUTcert for
Audit and Certification Process of GUTcert for PRODUCT CERTIFICATION ACC. TO ISO 17065 Sustainable Biomass acc. ISCC and REDcert GUT Certifizierungsgesellschaft für Managementsysteme mbh Umweltgutachter
More informationAn unofficial translation, in case of any discrepancies between the English version and the original Swedish version the latter will prevail.
An unofficial translation, in case of any discrepancies between the English version and the original Swedish version the latter will prevail. Consolidated version of The Swedish Board for Accreditation
More informationIEC Quality Assessment System for Electronic Components (IECQ System)
IECQ 04-1 Edition 1.0 2010-07 IECQ PUBLICATION IEC Quality Assessment System for Electronic Components (IECQ System) Standard Training Part 1: IECQ Training Body Requirements and Process for IECQ Acceptance
More informationGlobal Specification Protocol for Organisations Certifying to an ISO Standard related to Market, Opinion and Social Research.
CONTENTS i. INTRODUCTION 3 ii. OVERVIEW SPECIFICATION PROTOCOL DOCUMENT DEVELOPMENT PROCESS 4 1. SCOPE 5 2. DEFINITIONS 5 3. REFERENCES 6 4. MANAGEMENT STANDARDS FOR APPROVED CERTIFICATION BODIES 6 4.1
More information