DEVELOPING HIGHER LEVEL QUALIFICATIONS FOR TECHNICAL VOCATIONAL EDUCATION

Size: px
Start display at page:

Download "DEVELOPING HIGHER LEVEL QUALIFICATIONS FOR TECHNICAL VOCATIONAL EDUCATION"

Transcription

1 DEVELOPING HIGHER LEVEL QUALIFICATIONS FOR TECHNICAL VOCATIONAL EDUCATION ROSANNA A. URDANETA, CESO III Deputy Director General Policies and Planning

2

3 Some say that lifelong learning is the ability to learn from womb to tomb.

4 We in TESDA promote lifelong learning by developing the core values of our clients and providing public access to information which they can harness and utilize according to their needs.

5 TVET Trainers Creed: to take and learn even the most complex concept, skill and attitude and make it easy for every learner to understand, accept and perform

6 Government and Industry Should PUSH & STRENGTHEN TVET Occupational Changes Manual Labor replaced by: + highly-skilled labor TVET as a source of skills, knowledge and technology needed to drive productivity in the knowledge-based and transition societies of the 21 st Century - Unleashing the Potential of TVET, UNESCO + highly-specialized labor + IT Proficient workers + Robots, automated machines 4 th Industrial Revolution Significant shifts on global economic growth and employment landscape Pic Source: innovatelearningreview.org

7 Industry combination of major innovations in digital technology, biology, and hardware automations CyberPhysical systems (CPS) make own decisions CPS for new sources of energy, new ecosystems Devices, sensors, humans communicate via inet Nano- Technology CPS render technical assistance to humans IoT Internet Of Things (IoT) where hardware transfers data over a network without human-to-human or human-tocomputer interactions. The ability of technology to bring so quickly the outside world into the classroom is one of its greatest power if used wisely. Technology is a life skill. The Internet Of Things (IoT) will shape EDUCATION eventually. (Internet Of School Things) Dataconomy. Hannah Augur. December 2015

8 How Do We Take Advantage of the Opportunities and Address the Challenges How to Ensure the Workforce has the Skills for the Jobs of Tomorrow

9 TWO-PRONGED STRATEGY FRAMEWORK 17-Point Reform and Development Agenda Raising the Bar of Phil. TVET through Devt of High Level Qualifications TESDAOfficial

10 Describes the levelsof educational qualifications and sets the standards for qualification outcomes The Philippines has committed to reference with the AQRF in 2018 as per PQF-NCC Resolution No adopted on December 11, 2014

11

12 TESDA SHS TVL Track TESDA-CHED Joint Delivery Program Improving Teacher Education Programs Training of Trainers through Trainers Methodology Skills Upgrading Program for TVL Teachers Review and Validation of CGs for TVL Specialized Subjects

13 Level Training Regulations Enrolled (Full Qualification) Graduates (Full Qualification) Registered WTR Programs By Qualification TVET Trainers Head Count V 104 IV 14 4,702 4, III 69 66,707 59,225 1,466 4,166 II , ,592 11,250 28,293 15,609 I 23 81,133 72, Total , ,099 14,250 32,755

14 Level Training Regulations Assessed Certified Assessment Center (Qualification) Assessment Center (Institution Physical Count) Accredited Competency Assessor By Qualification Head Count V IV III ,913 9, ,131 II 156 1,308,292 1,209,994 5,935 1,516 9,235 5,914 I 23 95,245 88, Total 262 1,513,384 1,308,877 7,589 11,206

15 Developing Higher Qualifications NCs 3, 4 and Diploma Level Qualifications (Programs) Integration of 21 st Century Skills in the Curriculum

16 PQF LEVEL 5 DEFINED: -- Knowledge, Skills and Values theoretical and/or abstract with significant depth in some areas wide-ranging, specialized technical, creative and conceptual skills Work activities demonstrate breadth, depth and complexity in the planning and initiation Skills and knowledge applied across a broad range of technical and/or management requirements, evaluation and coordination. bolabsbolabs@gmail.com ; edward dela rosa ; becca vergara

17 PQF LEVEL 5 DEFINED: -- APPLICATION Applied in activities that are supervisory, complex and nonroutine which require an extensive interpretation and/or adaptation/ innovation. bolabsbolabs@gmail.com ; edward dela rosa ; becca vergara

18 DIPLOMA LEVEL DEFINED: -- DEGREE OF INDEPENDENCE In conditions where there is broad guidance and direction, where judgment is required in planning and selecting appropriate equipment, services and techniques for self and others. Undertake work involving participation in the development of strategic initiatives, as well as personal responsibility and autonomy in performing complex technical operations or organizing others. ; edward dela rosa ; becca vergara

19 21 ST CENTURY SKILLS SYDNEY ACCORD Program Learning Outcomes (Diploma level Training PROGRAM) PHILIPPINE QUALIFICATIONS FRAMEWORK PRESIDENTIAL CALL (Nationalism and World Citizenship)

20 17 PROGRAM LEARNING OUTCOMES Apply knowledge of mathematics, science, technology fundamentals, and a technology specialization to defined and applied technology procedures, processes, systems, or methodologies. In aid of systems design addessing identified technology problems, conduct the following: identify problems, conduct researches, investigations and experiments, and come up with conclusions and solutions. Apply professional ethics and responsibilities and norms of technology practice. Function effectively as an individual and as a member of diverse technical teams. Demonstrate knowledge and understanding of technology management principles and apply these to one s own work, as a member and leader in a team and to manage projects in multidisciplinary environments. Develop systems in managing and maintaining information. Shape and sustain strategic thinking and attitudes towards the common good. Establish, manage, and sustain Occupational Health and Safety (OHS) programs relevant to the workplace. Select and apply appropriate techniques, resources, and modern technology and IT tools, including, but not limited to, prediction and modelling, to broadly-defined technology-related activities, with an understanding of the limitations. Understand the impact of technology solutions in a societal and environmental context, and demonstrate knowledge of and need for sustainable development. Recognize the need for, and have the ability to engage in independent and lifelong learning in specialized technologies. Manage and evaluate workplace policies and procedures relevant to the workplace. Develop high-performing entrepreneurs. Communicate effectively on broadlydefined technology-related activities with the technology-affiliated community and with the society at large, by being able to comprehend and write effective reports and design documentation, make effective presentations, and give and receive clear instructions. Demonstrate understanding of the societal, health, safety, legal, and cultural issues and the consequent responsibilities relevant to technology practice. Lead and present ideas and practical suggestions to appropriate people on how improvements could be made. Evaluate the application of Critical Thinking (Higher Order Thinking Skills) and adjust Problem Solving Techniques. Demonstrate the sense of patriotism, both in the national and global milieu.

21 MAPPING OF COURSE LEARNING OUTCOMES WITH PROGRAM LEARNING OUTCOMES 17 PROGRAM LEARNING OUTCOMES PLO1 PLO2 PLO3 PLO4 PLO5 PLO6 PLO7 COURSE a 10 X X X X X X X X X X COURSE b 13 X X X X X X X X X X X X X COURSE c 11 X X X X X X X X X X X COURSE d 13 X X X X X X X X X X X X X COURSE e 10 X X X X X X X X X X COURSE f 12 X X X X X X X X X X X X COURSE g 10 X X X X X X X X X X COURSE h 13 X X X X X X X X X X X X X COURSE i 13 X X X X X X X X X X X X X COURSE j 14 X X X X X X X X X X X X X X COURSE k 9 X X X X X X X X X COURSE l 9 X X X X X X X X X PLO8 PLO9 PLO10 PLO11 PLO12 PLO13 PLO14 PLO15 PLO16 PLO17

22 Quality- Assured TVET ISO TESDA Standards Development UTPRAS Assessment and Certification TVET PROVIDERS EAS TVET QAF APACC STAR rating PQA Philippine Quality Award Industry Consultation

23 Intensification of Trainer Development Program To maintain quality of TVET providers by ensuring the continuous supply of competent administrators, instruction supervisors and teaching personnel within the TVET system Upgrade the institutional competencies of TTIs and TVIs Enhance the competencies of administrators, teaching and non teaching staff Strengthening of the National TVET Trainers Academy (NTTA)

24 A: DepEd, TESDA, and CHED have to ensure that course offerings in each sector (basic, TVET, and higher education) adhere to the level descriptors of the PQF. Q: How schools can align with the PQF? Q: How SHS can improve the dealing of TVL Track of SHS curriculum? A: K-12 is yet to produce its first set of graduates come April The DepEd is still to evaluate the initial results by then.

25 Thank you! ROSANNA A. URDANETA, CESO III Deputy Director General Policies and Planning

26 DEVELOPING HIGHER LEVEL QUALIFICATIONS FOR TECHNICAL VOCATIONAL EDUCATION ROSANNA A. URDANETA, CESO III Deputy Director General Policies and Planning

STRUCTURES AND MECHANISMS for Recognition/Validation/Accreditation on all Forms of Learning

STRUCTURES AND MECHANISMS for Recognition/Validation/Accreditation on all Forms of Learning STRUCTURES AND MECHANISMS for Recognition/Validation/Accreditation on all Forms of Learning ELMER K. TALAVERA, CESO III Technical Education and Skills Development Authority Competency Assessment and Certification

More information

3.4.3 Bachelor of Technology (Electronics Engineering)

3.4.3 Bachelor of Technology (Electronics Engineering) 3.4.3 Bachelor of Technology (Electronics Engineering) The BTech (Electronics Engineering) is offered in partnership with the Department of Electrical & Computer Engineering. The programme aims to graduate

More information

School of Engineering & Computational Sciences

School of Engineering & Computational Sciences Catalog: Undergraduate Catalog 2014-2015 [Archived Catalog] Title: School of Engineering and Computational Sciences School of Engineering & Computational Sciences Administration David Donahoo, B.S., M.S.

More information

School of Engineering and Computational Sciences

School of Engineering and Computational Sciences Catalog: Undergraduate Catalog 2012-2013 [Archived Catalog] Title: School of Engineering and Computational Sciences School of Engineering and Computational Sciences David Donahoo, B.S., M.S. Interim Dean,

More information

PRIOR LEARNING ASSESSMENT AND RECOGNITION (PLAR)

PRIOR LEARNING ASSESSMENT AND RECOGNITION (PLAR) PRIOR LEARNING ASSESSMENT AND RECOGNITION (PLAR) 1. INTRODUCTION 1.1 Purpose of the Guidelines These guidelines have been developed by TVETA to guide TVET Providers on how to: (i) Prepare, plan, and implement

More information

Computing Accreditation Commission Version 2.0 CRITERIA FOR ACCREDITING COMPUTING PROGRAMS

Computing Accreditation Commission Version 2.0 CRITERIA FOR ACCREDITING COMPUTING PROGRAMS Computing Accreditation Commission Version 2.0 CRITERIA FOR ACCREDITING COMPUTING PROGRAMS Optional for Reviews During the 2018-2019 Accreditation Cycle Mandatory for Reviews During the 2019-2020 Accreditation

More information

Qualification details

Qualification details Qualification details Title New Zealand Diploma in Web Development and Design (Level 5) Version 1 Qualification type Diploma Level 5 Credits 120 NZSCED 020115 Information Technology > Computer Science

More information

Academic Reference Standards (ARS) for Electronics and Electrical Communications Engineering, B. Sc. Program

Academic Reference Standards (ARS) for Electronics and Electrical Communications Engineering, B. Sc. Program Academic Reference Standards (ARS) for Electronics and Electrical Communications Engineering, B. Sc. Program Faculty of Electronic Engineering Menoufya University MARCH 2015 1 st Edition Contents Introduction.....2

More information

INSTITUTE OF AERONAUTICAL ENGINEERING (Autonomous) Dundigal, Hyderabad

INSTITUTE OF AERONAUTICAL ENGINEERING (Autonomous) Dundigal, Hyderabad INSTITUTE OF AERONAUTICAL ENGINEERING (Autonomous) Dundigal, Hyderabad - 500 043 INFORMATION TECHNOLOGY COURSE DESCRIPTION FORM Course Title Course Code Regulation Course Structure Course Coordinator SOFTWARE

More information

IQ Level 4 Award in Understanding the External Quality Assurance of Assessment Processes and Practice (QCF) Specification

IQ Level 4 Award in Understanding the External Quality Assurance of Assessment Processes and Practice (QCF) Specification IQ Level 4 Award in Understanding the External Quality Assurance of Assessment Processes and Practice (QCF) Specification Regulation No: 600/5528/5 Page 1 of 15 Contents Page Industry Qualifications...

More information

B.E Civil Engineering Program Outcomes (POs) At the end of the B.E program, students are expected to have developed the following outcomes.

B.E Civil Engineering Program Outcomes (POs) At the end of the B.E program, students are expected to have developed the following outcomes. CIVIL ENGINEERING BOARD BE-CBCS SYLLABUS 2017-18 Scheme B.E Civil Engineering Program Outcomes (POs) At the end of the B.E program, students are expected to have developed the following outcomes. 1. Engineering

More information

New Zealand Certificate in Regulatory Compliance (Core Knowledge) (Level 3)

New Zealand Certificate in Regulatory Compliance (Core Knowledge) (Level 3) New Zealand Certificate in Regulatory Compliance (Core Knowledge) (Level 3) If your staff need to learn the basics about regulatory compliance in New Zealand, then this is the paper for them. This qualification

More information

Qualification details

Qualification details Qualification details Title New Zealand Certificate in Business (First Line Management) (Level 4) Version 1 Qualification type Certificate Level 4 Credits 60 NZSCED 080301 Management and Commerce > Business

More information

Qualification Specification for the Knowledge Modules that form part of the BCS Level 4 Software Developer Apprenticeship

Qualification Specification for the Knowledge Modules that form part of the BCS Level 4 Software Developer Apprenticeship Qualification Specification for the Knowledge Modules that form part of the BCS Level 4 Software Developer Apprenticeship BCS Level 4 Diploma in Software Development Methodologies BCS Level 4 Diploma in

More information

New Zealand Certificate in Regulatory Compliance (Operational Practice) Level 4

New Zealand Certificate in Regulatory Compliance (Operational Practice) Level 4 New Zealand Certificate in Regulatory Compliance (Operational Practice) Level 4 This qualification is designed for people who work in frontline roles that deal with the operational aspects of regulatory

More information

University of Asia Pacific (UAP) Department of Computer Science and Engineering (CSE)

University of Asia Pacific (UAP) Department of Computer Science and Engineering (CSE) University of Asia Pacific (UAP) Department of Computer Science and Engineering (CSE) Course Outline Program: Course Title: Computer Science and Engineering (CSE) Object Oriented Programming I: Java Course

More information

ASTON UNIVERSITY PROGRAMME SPECIFICATION

ASTON UNIVERSITY PROGRAMME SPECIFICATION ASTON UNIVERSITY PROGRAMME SPECIFICATION Programme Title UCAS/JACS School/Subject Area Final Award Interim Awards Mode(s) of Study Normal Length of Programme Total Credits Programme Accredited By Dates

More information

Qualification details

Qualification details Qualification details Title New Zealand Certificate in Construction Related Trades (Supervisor) (Level 4) [Ref: 2381] Version 1 Qualification type Certificate Level 4 Credits 58 NZSCED 040399 Architecture

More information

Undergraduate Program for Specialty of Software Engineering

Undergraduate Program for Specialty of Software Engineering Undergraduate Program for Specialty of Software Engineering Ⅰ. Length of Schooling Standard: 4 years; Length of Schooling: 3-6 years Ⅱ. Degree Bachelor of Engineering Ⅲ. Specialty Orientation School of

More information

Qualification Specification. Skills for Engineering Level 1

Qualification Specification. Skills for Engineering Level 1 Qualification Specification Skills for Engineering Level 1 Version 1.0 (November 2016) Version 1.0 Page 1 of 22 This qualification specification covers the following qualifications: Qualification Title

More information

Qualification details

Qualification details Qualification details Title New Zealand Certificate in Project Management (Level 4) Version 1 Qualification type Certificate Level 4 Credits 60 NZSCED 080315 Management and Commerce > Business and Management

More information

QUALITY IMPROVEMENT PLAN (QIP) FOR THE CONSTRUCTION MANAGEMENT DEGREE PROGRAM

QUALITY IMPROVEMENT PLAN (QIP) FOR THE CONSTRUCTION MANAGEMENT DEGREE PROGRAM DEPARTMENT OF CONSTRUCTION MANAGEMENT AND CIVIL AND CONSTRUCTION ENGINEERING QUALITY IMPROVEMENT PLAN (QIP) FOR THE CONSTRUCTION MANAGEMENT DEGREE PROGRAM Updated 5/17 Organization The QIP consists of

More information

NOCN_Cskills Awards Level 1 Diploma in Construction and Civil Engineering Services (Construction)

NOCN_Cskills Awards Level 1 Diploma in Construction and Civil Engineering Services (Construction) NOCN_Cskills Awards Level 1 Diploma in Construction and Civil Engineering Services (Construction) Reference : 600/8622/1 Total Qualification Time (TQT) : 430 Credits : 43 Award Code : DIP079 Minimum Age

More information

University of Asia Pacific (UAP) Department of Computer Science and Engineering (CSE) Course Outline

University of Asia Pacific (UAP) Department of Computer Science and Engineering (CSE) Course Outline University of Asia Pacific (UAP) Department of Computer Science and Engineering (CSE) Course Outline Program: Course Title: Computer Networks Sessional Course Code: CSE 448 Semester: Level: Spring-2018

More information

Chartered Membership: Professional Standards Framework

Chartered Membership: Professional Standards Framework Chartered Membership: Professional Standards Framework Foreword The Chartered Institute of Architectural Technologists (CIAT) is the lead professional body for Architectural Technology and the UK Competent

More information

CRITERIA FOR ACCREDITING COMPUTING PROGRAMS

CRITERIA FOR ACCREDITING COMPUTING PROGRAMS CRITERIA FOR ACCREDITING COMPUTING PROGRAMS Effective for Reviews During the 2014-2015 Accreditation Cycle Incorporates all changes approved by the ABET Board of Directors as of October 26, 2013 Computing

More information

University of Asia Pacific (UAP) Department of Computer Science and Engineering (CSE)

University of Asia Pacific (UAP) Department of Computer Science and Engineering (CSE) University of Asia Pacific (UAP) Department of Computer Science and Engineering (CSE) Course Outline Program: Course Title: Computer Science and Engineering (CSE) Microprocessors Course Code: CSE 333 Semester:

More information

NEW TECHNICAL QUALIFICATIONS IN ENGINEERING. AUGUST 2016, Version 3

NEW TECHNICAL QUALIFICATIONS IN ENGINEERING. AUGUST 2016, Version 3 NEW TECHNICAL QUALIFICATIONS IN ENGINEERING AUGUST 2016, Version 3 NEW TECHNICAL QUALIFICATIONS IN ENGINEERING CONTENTS Challenges and opportunities The City & Guilds TechBac New technical qualifications:

More information

Several factors will be considered when matching instructors with training opportunities identified by Corporate Solutions.

Several factors will be considered when matching instructors with training opportunities identified by Corporate Solutions. Qualifications for Corporate Solutions Non-credit instructors Several factors will be considered when matching instructors with training opportunities identified by Corporate Solutions. They are: Certifications

More information

CIVIL ENGINEERING DEPARTMENT

CIVIL ENGINEERING DEPARTMENT DEPARTMENT PROGRAMMES CIVIL ENGINEERING DEPARTMENT 1) DIPLOMA IN CIVIL ENGINEERING This programme is designed to equip students with sound knowledge, skills and attitude and understanding of the environment,

More information

Construction and Property

Construction and Property ACADEMIC SERVICES Part 1: Basic Data Awarding Institution Teaching Institution Delivery Location Faculty responsible for programme Department responsible for programme Modular Scheme Title Professional

More information

University Strategy

University Strategy University Strategy 2011-2015 FOREWORD Dear Colleagues Thank you for your contributions to the University Strategy 2011-2015, which was endorsed by University Council at its meeting in December 2010. The

More information

CURRICULUM The Architectural Technology and Construction. programme

CURRICULUM The Architectural Technology and Construction. programme CURRICULUM The Architectural Technology and Construction Management programme CONTENT 1 PROGRAMME STRUCTURE 5 2 CURRICULUM COMMON PART 7 2.1 Core areas in the study programme 7 2.1.1 General 7 2.1.2 Company

More information

NOCN_Cskills Awards Level 3 Diploma in Site Carpentry (Construction)

NOCN_Cskills Awards Level 3 Diploma in Site Carpentry (Construction) NOCN_Cskills Awards Level 3 Diploma in Site Carpentry (Construction) Reference : 600/8604/X Total Qualification Time (TQT) : 1230 Credits : 123 Award Code : DIP058 Minimum Age : 16 Level : Level 3 Registration

More information

SQA Advanced Unit specification: general information. Professionalism and Ethics in Computing

SQA Advanced Unit specification: general information. Professionalism and Ethics in Computing SQA Advanced Unit specification: general information Unit title: Professionalism and Ethics in Computing Unit code: HP29 47 Superclass: DE Publication date: August 2017 Source: Scottish Qualifications

More information

BSc/MSci Professional Accounting in Business Programme Structure

BSc/MSci Professional Accounting in Business Programme Structure BSc/MSci Professional Accounting in Business Programme Structure BSc/MSci Professional Accounting in Business This programme is a gateway into the accountancy profession. It has two core aims: to enable

More information

Qualification Specification. Higher Apprenticeship in Business & Professional Administration Level 4 (England)

Qualification Specification. Higher Apprenticeship in Business & Professional Administration Level 4 (England) Qualification Specification Higher Apprenticeship in Business & Professional Administration Level 4 (England) Version 3.0 (October 2017) Qualification Specification: Business Administration: Higher Apprenticeship

More information

Curriculum for Excellence: the structure and design of new National Qualifications in Scotland

Curriculum for Excellence: the structure and design of new National Qualifications in Scotland Curriculum for Excellence: the structure and design of new National Qualifications in Scotland Donna Vivers CfE Liaison Manager donna.vivers@sqa.org.uk OECD Recommendations Better connection between the

More information

Confined Space Entry (CSE) Certification Training Standard

Confined Space Entry (CSE) Certification Training Standard Confined Space Entry (CSE) Certification Training Standard The Newfoundland and Labrador Occupational Health and Safety Regulations, Section 511 (3) states that a person shall not work in a Confined Space

More information

Qualification Manual. EAL Level 2 Certificate in Metals Industries Processes QUALIFICATION CODE: 500/7998/0 ISSUE: 2. Page 1 of 14

Qualification Manual. EAL Level 2 Certificate in Metals Industries Processes QUALIFICATION CODE: 500/7998/0 ISSUE: 2. Page 1 of 14 Qualification Manual EAL Level 2 Certificate in Metals Industries Processes QUALIFICATION CODE: 500/7998/0 ISSUE: 2 Page 1 of 14 Contents 1.0 About EAL... 3 2.0 Introduction to the Qualification... 4 3.0

More information

FRAMEWORK FOR ASEAN 2015 : A ROADMAP FOR SCHOOLS

FRAMEWORK FOR ASEAN 2015 : A ROADMAP FOR SCHOOLS 2014 NATIONAL CONFERENCE ON LEADERSHIP AND MANAGEMENT THEME: SCHOOL REFORM MODELS AND ROADMAPS FOR TRANSITION MANAGEMENT JUNE 5, 2014 * HASMIN HOSTEL, VALENCIA ST., STA. MESA FRAMEWORK FOR ASEAN 2015 :

More information

Traffic Control Person Certification Training Standard

Traffic Control Person Certification Training Standard Traffic Control Person Certification Training Standard This standard provides minimum criteria for the development and delivery of Traffic Control Person ( TCP) certification training programs. It was

More information

College Of. Technological Innovation

College Of. Technological Innovation College Of Technological Innovation Contact Us 00971-2-5993111 (Abu Dhabi) 00971-4-4021111 (Dubai) 00971-4-4021408 (College of Technological Innovation) @Zayed_U zayeduniversity ZayedU www.zu.ac.ae Introduction

More information

Information Technology (IT) Skill Standards Checklist

Information Technology (IT) Skill Standards Checklist of Workforce Development Division of Employment and Training Information Technology (IT) Skill Standards Checklist Student Name YA Coordinator School District YA Consortium High School Graduation Date

More information

New Zealand Certificate in Contact Centres (Level 3)

New Zealand Certificate in Contact Centres (Level 3) New Zealand Certificate in Contact Centres (Level 3) This programme teaches learners the core skills needed to work effectively in a contact centre. They ll learn techniques for listening, customer focus,

More information

LOCAL INITIATIVES ON SKILLS DEVELOPMENT AND EMPLOYMENT

LOCAL INITIATIVES ON SKILLS DEVELOPMENT AND EMPLOYMENT LOCAL INITIATIVES ON SKILLS DEVELOPMENT AND EMPLOYMENT ROSANNA A. URDANETA Regional Director Technical Education and Skills Development Authority (TESDA) Region VII, Philippines the prime authority in

More information

University of Asia Pacific (UAP) Department of Electrical and Electronics Engineering (EEE) Course Outline

University of Asia Pacific (UAP) Department of Electrical and Electronics Engineering (EEE) Course Outline University of Asia Pacific (UAP) Department of Electrical and Electronics Engineering (EEE) Course Outline Program: Course Title: Electrical and Electronics Engineering (EEE) Computer Networks Course Code:

More information

Designing Messaging Solutions with Microsoft Exchange Server 2007 (70-237)

Designing Messaging Solutions with Microsoft Exchange Server 2007 (70-237) Unit 132: Designing Messaging Solutions with Microsoft Exchange Server 2007 (70-237) Unit code: M/600/4235 QCF Level 4: BTEC Higher National Credit value: 10 Guided learning hours: 54 Aim and purpose This

More information

Client Services Policy Manual

Client Services Policy Manual Policy Statement WorkplaceNL has legislative responsibility to promote public awareness of workplace health and safety; educate employers, workers and other persons about workplace health and safety; develop

More information

PROGRAM IMPROVEMENT AND PROGRAM OF EXCELLENCE CERTIFICATION

PROGRAM IMPROVEMENT AND PROGRAM OF EXCELLENCE CERTIFICATION PROGRAM IMPROVEMENT AND PROGRAM OF EXCELLENCE CERTIFICATION Home Economics Careers and Technology Education Home Economics Careers and Technology PROGRAM OF EXCELLENCE RECERTIFICATION Table of Contents

More information

Special Purpose Specification. Level 6. Industrial Automation 6S5766

Special Purpose Specification. Level 6. Industrial Automation 6S5766 Special Purpose Specification Level 6 Industrial Automation 6S5766 Contents 1. Introduction 2. National Framework of Qualifications 3. Guide to Level 4. FETAC Awards 5. Award Specifications 6. Navigating

More information

University of Plymouth. BA (Hons) Accounting and Finance 0414

University of Plymouth. BA (Hons) Accounting and Finance 0414 University of Plymouth Faculty of Business Plymouth Business School Programme Specification BA (Hons) Accounting and Finance 0414 Final Approved Version August 2018 1. BA (Hons) Accounting and Finance

More information

CISCO NETWORKING ACADEMY CASE STUDY

CISCO NETWORKING ACADEMY CASE STUDY NETWORKING ACADEMY CASE STUDY MARCH 2018 CUSTOMER PROFILE Cisco Systems Inc. is the worldwide leader in IT that helps companies seize the opportunities of tomorrow by proving that amazing things can happen

More information

Professional Doctorate (Health, Social Care & Nursing) Professional Masters (Justice Welfare & Policy) Professional Masters (Built Environment)

Professional Doctorate (Health, Social Care & Nursing) Professional Masters (Justice Welfare & Policy) Professional Masters (Built Environment) GLASGOW CALEDONIAN UNIVERSITY Programme Specification Pro-forma (PSP) Programme Title Exit Awards Professional Doctorate Framework Professional Masters (Health, Social Care & Nursing) Professional Masters

More information

EOQ personal certificates

EOQ personal certificates EOQ personal certificates The European Organization for Quality (EOQ) has introduced an umbrella organization of national quality associations of all European countries a scheme for the qualification,

More information

Master degree program Technical legislation, standardization and quality management

Master degree program Technical legislation, standardization and quality management The experience of the Technical University of Sofia in education about standardization Master degree program Technical legislation, standardization and quality management Opened in 2007 at the Faculty

More information

The National Qualifications System Instruments to support Qualification and Lifelong Learning

The National Qualifications System Instruments to support Qualification and Lifelong Learning The National Qualifications System Instruments to support Qualification and Lifelong Learning Maria João Alves Head of Unit - Nacional Agency for Qualification and Vocational Education and Training (ANQEP)

More information

DEPARTMENT OF INSTRUMENTATION AND CONTROL ENGINEERING VISION

DEPARTMENT OF INSTRUMENTATION AND CONTROL ENGINEERING VISION DEPARTMENT OF INSTRUMENTATION AND CONTROL ENGINEERING VISION To become a world class school and centre of excellence in Instrumentation and control Engineering for Higher Level Learning, Research and Consultancy.

More information

Qualification Specification for the Knowledge Modules that form part of the BCS Level 3 Infrastructure Technician Apprenticeship

Qualification Specification for the Knowledge Modules that form part of the BCS Level 3 Infrastructure Technician Apprenticeship Qualification Specification for the Knowledge Modules that form part of the BCS Level 3 Infrastructure Technician Apprenticeship BCS Level 3 Award in Networking and Architecture BCS Level 3 Award in Mobile

More information

ACCA Certificate in Audit (RQF Level 4) Qualification specification

ACCA Certificate in Audit (RQF Level 4) Qualification specification ACCA Certificate in Audit (RQF Level 4) Qualification specification ABOUT ACCA We re the world s most forward thinking professional accountancy body. We believe that accountancy is vital for economies

More information

National Open Source Strategy

National Open Source Strategy National Open Source Strategy Ministry of Communications & Information Technology - Egypt June 2014 Outline Background Vision & Mission Preliminary Targets Strategic Objectives Enablers Ministry of Communications

More information

This qualification is expiring. The last date to meet the requirements is 31 December 2013.

This qualification is expiring. The last date to meet the requirements is 31 December 2013. NZQF NQ Ref 0640 Version 2 Page 1 of 5 National Certificate in Design (Draughting) (Level 2) Level 2 Credits 70 This qualification is expiring. The last date to meet the requirements is 31 December 2013.

More information

This qualification has been reviewed. The last date to meet the requirements is 31 December 2018.

This qualification has been reviewed. The last date to meet the requirements is 31 December 2018. NZQF NQ Ref 1498 Version 2 Page 1 of 18 National Diploma in Business (Level 5) with optional strands in Accounting, Finance, Finance - Māori, Health and Safety, Human Resource, Māori Business and, Marketing,

More information

Qualification Specification. Suite of Internal Quality Assurance Qualifications

Qualification Specification. Suite of Internal Quality Assurance Qualifications Qualification Specification Suite of Internal Quality Assurance Qualifications Version 5.0 (January 2018) This qualification specification covers the following qualifications: Qualification Title Gateway

More information

EVALUATION AND APPROVAL OF AUDITORS. Deliverable 4.4.3: Design of a governmental Social Responsibility and Quality Certification System

EVALUATION AND APPROVAL OF AUDITORS. Deliverable 4.4.3: Design of a governmental Social Responsibility and Quality Certification System EVALUATION AND APPROVAL OF AUDITORS Deliverable 4.4.3: Design of a governmental Social Responsibility and Quality Certification System 1 TABLE OF CONTENTS 1. Scope and field of Application 3 2. Normative

More information

Work-ready skills in Business, Administration and IT

Work-ready skills in Business, Administration and IT Work-ready skills in Business, Administration and IT We believe in learning At the core of everything we do is the desire to make a measurable impact on improving people s lives through learning. Pearson

More information

Qualification Manual. Level 3 Diploma in NGINEERING. Fabrication and Welding. Engineering Technology. Qualification Code: 501/1131/0. Issue 2.

Qualification Manual. Level 3 Diploma in NGINEERING. Fabrication and Welding. Engineering Technology. Qualification Code: 501/1131/0. Issue 2. Qualification Manual Level 3 Diploma in Fabrication and Welding NGINEERING Engineering Technology Qualification Code: 501/1131/0 Issue 2.0 0 Engineering and Technology Contents 1.0 About EAL 2.0 Introduction

More information

2-Day Exclusive Sale on NOW! HURRY - Ends 28th September!

2-Day Exclusive Sale on NOW! HURRY - Ends 28th September! 2-Day Exclusive Sale on NOW! HURRY - Ends 28th September! Just imagine having the skills to confidently oversee the day to day administration needs of an office. Business administration professionals comprise

More information

Prof.Dr. Sotiraq Dhamo Doc. Julian Naqellari The University of Tirana Accounting Department

Prof.Dr. Sotiraq Dhamo Doc. Julian Naqellari The University of Tirana Accounting Department Prof.Dr. Sotiraq Dhamo Doc. Julian Naqellari The University of Tirana Accounting Department 1. Key stakeholders in A&A Education 2. Current Third Level Qualification: University of Tirana (as an example)

More information

American Society for Quality

American Society for Quality US Army BOSS Program Information Session American Society for Quality Choices and Challenges for the Future 10 September 2017 Certified Lean Six Sigma Black Belt Certified Change Management Advanced Practitioner

More information

ASEAN THE RISING FRONTIER

ASEAN THE RISING FRONTIER ASEAN THE RISING FRONTIER Challenges in the Accounting Profession Dean Estelita C. Aguirre December 4, 2013 ASEAN AGREEMENT Roadmap for an ASEAN Community (2009-2015) One vision. One identity. One Community.

More information

School of Engineering & Built Environment

School of Engineering & Built Environment School of Engineering & Built Environment BEng (Hons) in Digital Security, Forensics & Ethical Hacking Programme Specification Proforma (PSP) August 2015 P a g e 1 GLASGOW CALEDONIAN UNIVERSITY Programme

More information

WSQ Specialist Diploma in Workplace Safety & Health. Course Outline. Students must complete the following 16 modules:

WSQ Specialist Diploma in Workplace Safety & Health. Course Outline. Students must complete the following 16 modules: Course Outline Students must complete the following 16 modules: 1. Establish WSH Policy and Advise on WSH Legal Compliance Issues (501C-1) 2. Identify WSH Hazards and Assess WSH Risks (502C-1) 3. Recommend

More information

The Certificate IV in Training and Assessment qualification TAE40110 is currently the standard for anyone wanting to become a qualified trainer.

The Certificate IV in Training and Assessment qualification TAE40110 is currently the standard for anyone wanting to become a qualified trainer. Training and Assessment is already considered a valuable qualification to many employers and organisations, and maintaining currency is absolutely essential if you wish to become a trainer at an Australian

More information

13.f Toronto Catholic District School Board's IT Strategic Review - Draft Executive Summary (Refer 8b)

13.f Toronto Catholic District School Board's IT Strategic Review - Draft Executive Summary (Refer 8b) AGENDA ADDENDU TE REGULAR EETING OF TE AUDIT COITTEE COITTEE PUBLIC SESSION Tuesday, June 6, 2017 6:30 P.. Pages 13. Staff Reports 13.f Toronto Catholic District School Board's IT Strategic Review - Draft

More information

Typical Training Duration 11 months

Typical Training Duration 11 months New Zealand Certificate in Business (Administration and Technology) (Level 3) This programme is ideal for learners who need to gain a good general understanding of business administration and technology.

More information

Awards, Certificates and Diplomas in Employability Skills (5546)

Awards, Certificates and Diplomas in Employability Skills (5546) Awards, Certificates and Diplomas in Employability Skills (5546) QUALIFICATION HANDBOOK Qualification Handbook for centres May 2017 Version 7.1 Qualification at a glance Subject area City & Guilds number

More information

LEARN MORE EARN MORE. BSB Business Brochures

LEARN MORE EARN MORE. BSB Business Brochures LEARN MORE EARN MORE BSB Business Brochures Why You Should Choose IPS Institute It is no secret that the training industry is jam packed with competitors. However, for over a decade IPS Institute has become

More information

Bachelor of Business. HE Bachelor of Business HE Associate Degree of Business HE Diploma of Business. Course information for

Bachelor of Business. HE Bachelor of Business HE Associate Degree of Business HE Diploma of Business. Course information for Course information for Bachelor of Business Associate Degree of Business Diploma of Business Course Number HE20514 - Bachelor of Business HE20513 - Associate Degree of Business HE20512 - Diploma of Business

More information

Qualification Specification. Level 2 Qualifications in Skills for Hospitality and Catering

Qualification Specification. Level 2 Qualifications in Skills for Hospitality and Catering Qualification Specification Level 2 Qualifications in Skills for Hospitality and Catering Version 5.0 (January 2018) Version 1.0 Page 1 of 28 This qualification specification covers the following qualifications:

More information

STUDENT AND ACADEMIC SERVICES

STUDENT AND ACADEMIC SERVICES PROGRAMME SPECIFICATION Part 1: Information Awarding Institution Teaching Institution Delivery Location Study abroad / Exchange / Credit recognition Faculty responsible for programme Department responsible

More information

CALIFORNIA STATE POLYTECHNIC UNIVERSITY, POMONA ACADEMIC SENATE ACADEMIC PROGRAMS COMMITTEE REPORT TO THE ACADEMIC SENATE AP

CALIFORNIA STATE POLYTECHNIC UNIVERSITY, POMONA ACADEMIC SENATE ACADEMIC PROGRAMS COMMITTEE REPORT TO THE ACADEMIC SENATE AP CALIFORNIA STATE POLYTECHNIC UNIVERSITY, POMONA ACADEMIC SENATE ACADEMIC PROGRAMS COMMITTEE REPORT TO THE ACADEMIC SENATE AP-088-167 Electronic Systems Engineering Technology BS FOR SEMESTERS Academic

More information

Award in Window on Wales. Certificate in Window on Wales

Award in Window on Wales. Certificate in Window on Wales Qualification Guide Level 1 Award in Window on Wales (QCF) (600/6410/9) Certificate in Window on Wales (QCF) (600/6412/2) Contents Introduction 3 Agored Cymru Qualifications 3 Qualification Information

More information

QUALIFICATION DETAILS

QUALIFICATION DETAILS QUALIFICATION DETAILS Qualification Title New Zealand Diploma in Engineering Practice (with strands in Civil Engineering, Electrical Engineering and Mechanical Engineering) Version 1.0 Qualification type

More information

Academic Program Plan for Assessment of Student Learning Outcomes The University of New Mexico

Academic Program Plan for Assessment of Student Learning Outcomes The University of New Mexico Academic Program Plan for Assessment of Student Learning Outcomes The Mexico A. College, Department and Date 1. College: School of Engineering 2. Department: Department of Civil Engineering 3. Date: February

More information

Career Readiness Pathways

Career Readiness Pathways FUEL EDUCATION SOLUTION Career Readiness Pathways A Comprehensive Online and Blended Learning Program for Career and Technical Education, Leading Students from Exploration through Certification Igniting

More information

Welcome to the HP Institute

Welcome to the HP Institute Welcome to the HP Institute How HP is working with education to develop tomorrow s IT workforce today Capability Business need for speed The rate of business is increasing exponentially 2020 2T devices

More information

ITC Level 3 Award in Teaching and Assessing First Aid Qualifications G50.T. Qualification Specification Guidance for Centres

ITC Level 3 Award in Teaching and Assessing First Aid Qualifications G50.T. Qualification Specification Guidance for Centres G50.T ITC L3 Award in Teaching and Assessing First Aid Qualifications Guidance for Centres [1] ITC Level 3 Award in Teaching and Assessing First Aid Qualifications Qualification Number: 603/0886/2 G50.T

More information

Educator Learning Journeys. Tracy Immel Global Director Teacher Professional Development Programs & Certification

Educator Learning Journeys. Tracy Immel Global Director Teacher Professional Development Programs & Certification Educator Learning Journeys Tracy Immel timmel@microsoft.com Global Director Teacher Professional Development Programs & Certification A Partnership Approach to Education Reform Set Vision and Define Priorities

More information

PROTERRA CERTIFICATION PROTOCOL V2.2

PROTERRA CERTIFICATION PROTOCOL V2.2 PROTERRA CERTIFICATION PROTOCOL V2.2 TABLE OF CONTENTS 1. Introduction 2. Scope of this document 3. Definitions and Abbreviations 4. Approval procedure for Certification Bodies 5. Certification Requirements

More information

National Certificate in Contact Centres - Senior CSR (Level 3) or Team Leader (Level 4) Depending on the Strand

National Certificate in Contact Centres - Senior CSR (Level 3) or Team Leader (Level 4) Depending on the Strand National Certificate in Contact Centres - Senior CSR (Level 3) or Team Leader (Level 4) Depending on the Strand This qualification has been reviewed and replaced by the New Zealand Certificate in Contact

More information

Study Scheme & Syllabus Of B.Tech Production Engineering 2014 onwards

Study Scheme & Syllabus Of B.Tech Production Engineering 2014 onwards BOS/PE/1 Study Scheme & Syllabus Of B.Tech Production Engineering 2014 onwards Guru Nanak Dev Engineering College (An Autonomous College U/S [2(f) and 12 (B) of UGC Act 1956) NBA Accredited Programmes

More information

Achieving Successful Outcomes. Credentials and Certificates

Achieving Successful Outcomes. Credentials and Certificates Achieving Successful Outcomes Credentials and Certificates CREDENTIALS and CERTIFICATES DEFINITION AND STRATEGIES Why Postsecondary Credentials President Obama s Goal Every American completes one year

More information

Terms of Participation

Terms of Participation National Construction Safety Officer (NCSO TM ) National Health and Safety Administrator (NHSA) Terms of Participation INTRODUCTION TO NCSO The primary objective of this program is to recognize individuals

More information

TQUK Level 2 Award in Safe Moving and Handling (RQF)

TQUK Level 2 Award in Safe Moving and Handling (RQF) TQUK Level 2 Award in Safe Moving and Handling (RQF) Qualification Specification Qualification Number: 601/1993/7 Introduction Welcome to TQUK. TQUK is an Awarding Organisation recognised by the Office

More information

CHALAPATHI INSTITUTE OF ENGINEERING & TECHNOLOGY

CHALAPATHI INSTITUTE OF ENGINEERING & TECHNOLOGY CHALAPATHI INSTITUTE OF ENGINEERING & TECHNOLOGY CHALAPATHI NAGAR, LAM, GUNTUR-522034 DEPARTMENT OF COMPUTER SCIENCE & ENGINEERING Vision of the Institute To emerge as an Institute of Excellence for Engineering

More information

Tutor, assessor and IQA requirements for YMCA Awards qualifications

Tutor, assessor and IQA requirements for YMCA Awards qualifications Tutor, assessor and IQA requirements for YMCA Awards qualifications This document sets out the staffing requirements that centres must meet in order to be approved to provide YMCA Awards qualifications.

More information

PROGRAMME SPECIFICATION

PROGRAMME SPECIFICATION PROGRAMME SPECIFICATION Bachelor of Science with Honours (SW) (Fnd) in Computer Science Awarding institution Teaching institution UCAS Code JACS Code Liverpool John Moores University LJMU Programme Duration

More information

Fall Protection Certification Training Standard

Fall Protection Certification Training Standard Fall Protection Certification Training Standard Guard rails? Fall Arrest? Safety Nets? The Newfoundland and Labrador Occupational Health and Safety Regulations, Section 139 states that a person shall not

More information

Find out more about APM qualifications and keep up to date with the latest developments at apm.org.uk/apmqualifications

Find out more about APM qualifications and keep up to date with the latest developments at apm.org.uk/apmqualifications APM recognises the importance of keeping qualifications up to date and relevant, so they reflect the knowledge that you have, the work that you do and the skills that you have developed. Our APM Project

More information