Wireless Acess Point Quick Installation Guide

Transcription

1 N.TOP Wireless Acess Point Quick Installation Guide

2 Support You can download the complete guides and supporting programs from < duct/n.top/download>, or scan the QR code here. Please consult with the FAQs < duct/n.top/faq> before writing to OvisLink Tech Support Team for further assistance For any other question, please read the user manual in the CD or mail to for technical support.

3 Declaration of Conformity We, Manufacturer/Importer OvisLink Corp. 5F, No.6, Lane 130, Min-Chuan Rd., Hsin-Tien Dist., New Taipei City 231, Taiwan Declare that the product n Ceiling Mount Long Range PoE AP AirLive N.TOP is in conformity with In accordance with 2004/108/EC Directive and 1999/5 EC-R & TTE Directive Clause EN V1.7.1:2006 EN V1.8.1:2008 EN V2.1.1:2009 EN 50385:2002 EN :2006+ A11:2009 CE marking Description Electromagnetic compatibility and Radio spectrum matters (ERM transmission equipment operating in the 2.4GHz ISM band And spectrum modulation techniques; Part 1: technical Characteristic conditions Part2:Harmonized EN covering Essential requirem article 3.2 of the R&TTE Directive Electromagnetic compatibility and Radio spectrum Matters (ERM Electromagnetic compatibility(emc) standard for radio equipme Part 17:Specific conditions for Wideband data and HIPERLAN Product standard to demonstrate the Compliance of radio base Fixed terminal stations for wireless Telecommunication System restrictions or the reference levels related to human exposure to Frequency electromagnetic fields ( 110 MHz 40 GHz ) - Gene Safety for information technology equipment including electrical equipment n Ceiling Mount Long Range PoE AP VER N.TOP Package Contents Please check the package contents and contact your distributor if any part is missing. N.TOP 5V DC adapter The Total Networking Solutions N.TOP Quick Installation Guide User Manual CD

4 I/O Interface Button Reset / WPS Reset the router to factory default settings (clear all settings) or start WPS function. Reset: Press this button and hold for 10 seconds to restore all settings to factory defaults. WPS: Press this button for less than 5 seconds to start WPS function. Power Adapter Connector LAN Port, PoE Port

5 01 N.TOP Installation 1. Screw the bottom case into the wall. Ceiling

6 POE-GSH2004L Port Gigabit + 4-Port UTP/SFP Combo Active PoE Web Smart Switch System Link / Act Speed PoE Mode N.TOP Installation 2. There are two ways to power up N.TOP (1) Connect N.TOP to 802.3at/af PoE switch via RJ45 Cable PoE Siwtch (2) Connect the 5V/1A adapter to power up N.TOP Power Adapter LAN

7 03 N.TOP Installation 3. Put the case screws back.

8 POE-FSH1008AT 8-port POE + 2 Combo Gigabit 802.3at Device Guard Web Smart Switch PoE LNK/ACT G2 PoE LNK RST PWR LNK/ACT LNK G G1 G2 04 Connect N.TOP to Network a. Connect N.TOP to the LAN port of the switch. b. Connect switch to the LAN port of the router. c. Connect the PC/NB to the LAN port of the switch. N.TOP Switch PC/NB Router

9 05 Set up the Network Environment The default IP address of N.TOP is Please set your PC/NB to the same subnet Enter the N.TOP IP address into browser to visit the N.TOP UI The default username/password is admin/airlive

10 AirLive Central Wireless Management N.TOP via AirLive Central Wireless

11 Support You can download the AirLive Central Wireless from < nload>, or scan the QR code here. For any other question, please read the user manual in the CD or mail to for technical support.

12 AirLive Central Wireless Installation 1. Please click the AirLive Central Wireless Setup file. The software will install automatically and click the AirLive Central Wireless short cut to start the program

13 AirLive Central Wireless Installation 2. Log-in AirLive Central Wireless Program. Default username and password is admin / airlive AirLive Central Wireless Account admin Password airlive Login Exit Copyright 2014

14 AirLive Central Wireless Installation 3. After Log-in, the utility will start to scan N.TOP, or you can click to scan N.TOP. Then click to add the N.TOP into

15 AirLive Central Wireless Installation 4. Click the tag which will list the N.TOPs which you add in

16 AirLive Central Wireless Installation 5. Select the N.TOP which you want to manage, then you can change the SSID, channel, access control and system information. Click to save the setting

17 AirLive Central Wireless Installation 6. You can change multiple N.TOPs together, tick the, select the N.TOPs. Then tick the item you want to change. You also can upgrade firmware for multiple N.TOPs in system page.

18 AirLive Central Wireless Installation 7. The setting will take effect after device is reboot. Click button in the System