IBM System Networking RackSwitch G8264/G8264T IBM Redbooks Product Guide

Transcription

1 IBM System Networking RackSwitch G8264/G8264T IBM Redbooks Product Guide IBM System Networking now offers the IBM RackSwitch G8264 (leveraging SFP+ technology) and the IBM RackSwitch G8264T (leveraging 10Gbase-T technology). Both are 10 and 40 Gigabit Ethernet (GbE) switches specifically designed for the data center, and are ideal for today's big data, cloud and optimized workload solutions. They are enterprise class Layer 2 and layer 3 full featured switches that deliver line-rate, high-bandwidth switching, filtering, and traffic queuing without delaying data. Large data-center grade buffers help keep traffic moving, while the redundant power and fans along with numerous high availability features help provide high availability for business sensitive traffic. The RackSwitch G8264, shown in Figure 1, is ideal for latency sensitive applications such as high performance computing clusters and financial applications. In addition to the 10GbE and 40GbE connections, the G8264 also has the capability for legacy 1GbE connections. The G8264 supports the newest protocols including Data Center Bridging/Converged Enhanced Ethernet (DCB/CEE) for support of Fibre Channel over Ethernet (FCoE) in addition to ISCSI and NAS. The G8264 is also designed to support IBM Virtual Fabric, which helps clients significantly reduce cost and complexity related to I/O requirements of many virtualization deployments. Virtual Fabric helps you reduce the number of multiple I/O adapters to a single dual-port 10 G adapter, and also to reduce the number of cables and required upstream switch ports. Virtual Fabric allows you to carve a dual-port 10 G server adapter into 8 virtual NICs (vnics) and to create dedicated virtual pipes between the adapter and the switch for optimal performance., higher availability, and improved security. Using Virtual Fabric IT can make dynamic changes and allocate bandwidth per vnic, making it possible to adjust over time without downtime. Figure 1. IBM System Networking RackSwitch G8264 The G8264T is part of a comprehensive 10GBase-T IBM solution that includes servers, storage and networking and that provides improved virtualization, better management, and smarter connectivity options for next generation data centers. Flexible connectivity across distances up to 100m at a low cost makes the G8264T an optimal choice for connecting high-speed server and storage devices. Figure 2. IBM System Networking RackSwitch G8264T Did you know Did you know that: IBM System Networking RackSwitch G8264/G8264T 1

2 The RackSwitch G8264 is designed to support a number of types of configurations: 1 Gb, 10 Gb, and 40 Gb, Virtual NIC, Converged Enhanced Ethernet (CEE/DCB), and iscsi. The RackSwitch G8264 with SFP+ technology is the ideal solution for clients looking for low latency and low power consumption. The RackSwitch G8264 is designed to support Data Center Bridging (DCB), the IEEE s group of protocols that provide lossless Ethernet and allow clients to reduce the costs of implementing either: NAS or iscsi convergence and priority-based flow control FCoE by aggregating switch ports before connecting to more costly upstream Fibre Channel gateway devices. IBM is a leader in network virtualization, offering the on-switch IBM VMready software that reduces the complexity of managing virtual machines (VMs) in the network. The G8264 plays a vital role with IBM Virtual Fabric which reduces costs and complexity in environments where four or more NICs are needed per server. A perfect example is virtualization, where clients often need as many as eight NICs per server. The G8264T offers 48 10Gbase-T connections allowing for cost effective CAT6/6A cables of distances up to 100m. Part number information Table 1 lists the part numbers for ordering IBM System x and IBM Power Systems modules and additional options. IBM System Networking RackSwitch G8264/G8264T 2

3 Table 1. IBM part numbers and feature codes for ordering (part 1) Description System x part number Power Systems MTM/FC IBM System Networking RackSwitch G8264 (Rear-to-Front) IBM System Networking RackSwitch G8264 (Front-to-Rear) IBM System Networking RackSwitch G8264T (Rear-to-Front) IBM System Networking RackSwitch G8264T (Front-to-Rear) 7309G C F 730CR9 730CF9 1 Gb options (supported only on G8264) IBM SFP RJ45 Transceiver 81Y1618 EB29 IBM SFP SX Transceiver 81Y1622 EB2A IBM SFP LX Transceiver 90Y m Blue Cat5e Cable 40K m Blue Cat5e Cable 40K m Blue Cat5e Cable 40K m Blue Cat5e Cable 40K m Blue Cat5e Cable 40K8930 IBM System Networking RackSwitch G8264/G8264T 3

4 Table 1. IBM part numbers and feature codes for ordering (part 2) Description IBM System x part number Power Systems MTM/FC 10 Gb options (supported only on G8264) IBM SFP+ SR Transceiver 46C3447 EB28 IBM SFP+ LR Transceiver IBM SFP+ ER Transceiver 1m LC-LC Fiber Cable (networking) - Optical 5m LC-LC Fiber Cable (networking) - Optical 25m LC-LC Fiber Cable (networking) - Optical 90Y Y Y Y Y m IBM Passive DAC SFP+ Cable 90Y m IBM Passive DAC SFP+ Cable 90Y m IBM Passive DAC SFP+ Cable 90Y m IBM Passive DAC SFP+ Cable IBM Twinax Direct Attach Cable (DAC) 1m IBM Twinax Direct Attach Cable (DAC) 3m IBM Twinax Direct Attach Cable (DAC) 5m 90Y W2398 (8-pack: 45W2401*) 45W2408 (8-pack: 45W2409*) 45W3039 (8-pack: 45W3042*) 1m 10GbE Cable SFP+ Active Twinax 3m 10GbE Cable SFP+ Active Twinax 5m 10GbE Cable SFP+ Active Twinax ENO1 EN02 EN03 IBM System Networking RackSwitch G8264/G8264T 4

5 Table 1. IBM part numbers and feature codes for ordering (part 3) 40 Gb options (Supported on G8264 & G8264T) (Supported on G8264 only) IBM QSFP+ SR Transceiver 49Y7884 EB27 10 m IBM QSFP+ MTP Optical Cable 30 m IBM QSPF+ MTP Optical Cable 1 m IBM QSFP+ DAC Break Out Cable 3 m IBM QSFP+ DAC Break Out Cable 5 m IBM QSFP+ DAC Break Out Cable 90Y Y Y Y Y7888 EB24 EB25 EB26 1 m IBM QSFP+-to-QSFP+ Cable 49Y m IBM QSFP+-to-QSFP+ Cable 49Y m IBM QSFP+-to-QSFP+ Cable 00D m IBM QSFP+-to-QSFP+ Cable 00D4813 IBM System Networking RackSwitch G8264/G8264T 5

6 Table 1. IBM part numbers and feature codes for ordering (part 4) Miscellaneous options IBM 19" Flexible 4 Post Rail Kit Front-to-rear, hot-swappable power supply spare (G8264 only) Rear-to-front, not swappable power supply spare (G8264 only) Front-to-rear, hot-swappable 750WCFF power supply spare (G8264T only) Rear-to-front, hot swappable 750WCFF power supply spare (G8264T only) Front-to-rear, hot swappable fan assembly spare (both G8264 and G8264T) Rear-to-front, hot swappable fan assembly spare (both G8264 and G8264T) 49Y Y Y D D Y Y6026 * Products are ordered through IBM Storage and Power ordering systems. Note: Transceivers are not included in the purchase of the switch and all require using the appropriate cables. With the flexibility of the IBM switch, you can take advantage of the technologies required for multiple environments, such as the following (shown in Figure 3): For 1 Gb links, on the G8264 specifically, you can use SFP transceivers plus LC-to-LC fiber cables. For 10 Gb, you can use the following: 10GBase-T allows CAT6 or CAT6A cables for cost effective long distances. SFP+ transceivers (SR, LR, or ER) plus LC-to-LC fiber cables for longer distances. For 40 Gb links, you can use QSFP to QSFP cables up to 7m, or QSFP transceivers and MTP cables for longer distances. IBM System Networking RackSwitch G8264/G8264T 6

7 Figure 3. Options and their supported distances The module part numbers include the following items: One IBM System Networking RackSwitch G8264/ G8264T Generic Rail Mount Kit (2-post) IBM serial cable Power cords, shown in Table 2, are shipped separately at an additional charge. IBM System Networking RackSwitch G8264/G8264T 7

8 Table 2. Power cords and descriptions Power cord 39Y Y Y Y Y Y Y Y Y Y Y Y Y Y7931 Description Power Cord Europe AC plug 10A/250 V; OPT Power Cord Europe (Denmark) AC plug 10A/250 V; OPT Power Cord Europe (Switzerland) AC plug 10A/250 V; OPT Power Cord Israel AC plug 10A/250 V; OPT Power Cord South Africa AC plug 10A/250 V; OPT Power Cord UK AC plug 13A/250 V; OPT Power Cord Australia AC plug 10A/250 V; OPT Power Cord Korea AC plug 10A/250 V; OPT Power Cord Japan AC plug 10A/125 V; OPT Power Cord India AC plug 10A/250 V; OPT Power Cord China AC plug 16A/250 V; OPT Power Cord Brazil AC plug 16A/250 V; OPT Power Cord Uruguay/Argentina AC plug 16A/250 V; OPT Power Cord US/Canada AC plug 10A/125 V; OPT Benefits The IBM System Networking RackSwitch G8264 offers the following benefits: High performance: The 10 Gb/40 Gb switch provides the best combination of low latency, non-blocking line-rate switching, and ease of management. It has a throughput of 1.28 Tbps. Lower power and better cooling: The IBM RackSwitch G8264 uses as little as 275 W of power, which is a fraction of the power consumption of most competitive offerings. Unlike side-cooled switches, which can cause heat recirculation and reliability concerns, the G8264 s front-to-rear or rear-to-front cooling design reduces data center air conditioning costs by having airflow match the servers in the rack. In addition, variable speed fans help to automatically reduce power consumption. Virtual Fabric: Can help customers address I/O requirements for multiple NICs while reducing cost and complexity. Virtual Fabric for IBM allows you to carve a physical NIC into multiple virtual NICs (between 2-8 vnic) and to create a virtual pipe between the adapter and the switch for improved performance, availability, and security. VM-Aware Networking: VMready software on the switch simplifies configuration and improves security in virtualized environments. VMready automatically detects virtual machine movement between physical servers and instantly reconfigures each VM s network policies across VLANs to keep the network up and running without interrupting traffic or impacting performance. VMready works with all leading VM providers, such as VMware, Citrix, Xen, PowerVM and Microsoft. Layer 3 functionality: The G8264 includes Layer 3 functionality, which provides security and performance benefits, as inter-vlan traffic stays within the switch. This switch also provides the full range of Layer 3 protocols from static routes for technologies such as Open Shortest Path First (OSPF) and Border Gateway Protocol (BGP) for enterprise customers. Seamless interoperability: IBM switches perform seamlessly with other vendors' upstream switches. Fault tolerance: These IBM switches learn alternate routes automatically and perform faster convergence in the unlikely case of a link, switch, or power failure. The switch uses proven IBM System Networking RackSwitch G8264/G8264T 8

9 technologies like L2 trunk failover, advanced VLAN-based failover, VRRP, and HotLink. Multicast: Supports IGMP Snooping v1, v2, and v3 with 2 K IGMP groups, as well as Protocol Independent Multicast such as PIM Sparse Mode or PIM Dense Mode. Converged fabric: The IBM switch is designed to support CEE and connectivity to FCoE gateways. CEE will help enable clients to combine storage, messaging traffic, VoIP, video, and other data on a common data center Ethernet infrastructure. FCoE will help enable highly efficient block storage over Ethernet for consolidating server network connectivity. As a result, clients can deploy a single server interface for multiple data types, which can simplify both deployment and management of server network connectivity, while maintaining the high availability and robustness required for storage transactions. The IBM System Networking RackSwitch G8264T offers the following benefits: Low cost cabling: The ability to leverage CAT6 or CAT6A cabling can save clients thousands of dollars for connections anywhere from a couple feet to 100 meters compared to SFP+ models. High performance: For those requiring the use of 10GBase-T the 10 Gb/40 Gb capabilities provides the best combination of non-blocking line-rate switching with throughput of 1.2 Tbps. Lower power and better cooling: The IBM RackSwitch G8264T s typical power consumption is 385 W, which is a fraction of the power consumption of most competitive 10GBase-T offerings. Unlike side-cooled switches, which can cause heat recirculation and reliability concerns, the G8264T s front-to-rear or rear-to-front cooling design reduces data center air conditioning costs by having airflow match the servers in the rack. In addition, variable speed fans assist in automatically reducing power consumption. VM-Aware Networking: VMready software on the switch simplifies configuration and improves security in virtualized environments. VMready automatically detects virtual machine movement between physical servers and instantly reconfigures each VM s network policies across VLANs to keep the network up and running without interrupting traffic or impacting performance. VMready works with all leading VM providers, such as VMware, Citrix, Xen, and Microsoft. Layer 3 functionality: The IBM switch includes Layer 3 functionality, which provides security and performance benefits, as inter-vlan traffic stays within the switch. This switch also provides the full range of Layer 3 protocols from static routes for technologies such as Open Shortest Path First (OSPF) and Border Gateway Protocol (BGP) for enterprise customers. Seamless interoperability: IBM switches perform seamlessly with other vendors' upstream switches. Fault tolerance: These IBM switches learn alternate routes automatically and perform faster convergence in the unlikely case of a link, switch, or power failure. The switch uses proven technologies like L2 trunk failover, advanced VLAN-based failover, VRRP, and HotLink. Multicast: Supports IGMP Snooping v1, v2, and v3 with 2 K IGMP groups, as well as Protocol Independent Multicast such as PIM Sparse Mode or PIM Dense Mode. Use Table 3 to select the appropriate switch. IBM RackSwitch G8264 IBM RackSwitch G8264T Port types Based on SFP+ Based on 10GBase-T Latency Lower latency nanosecond 3.2 microseconds Typical power Lower power watts Competitive vs. other 10GBase-T - 385W Copper cable length Up to 8.5m Up to 100m Total distance Up to 40KM with Transceiver Limited to 100m Lower TCO for 100m and less TCO Less than other SFP+ (based on adapter, cables and switch) Table 3. RackSwitch G8264 and RackSwitch G8264T features Warranty information The IBM RackSwitch includes an IBM standard 3-year hardware and software warranty. IBM also reserves the right to provide new features as part of future software releases. Software Upgrade IBM System Networking RackSwitch G8264/G8264T 9

10 Entitlement is based on the switch s warranty or post warranty extension and service contracts. Features and specifications Performance is as follows: 100% Line rate performance 1280 Gbps non-blocking switching throughput (full duplex) Latency: G8264 (880 nanoseconds) G8264T (3.2 microseconds) 960 Mpps Hardware features The hardware features are as follows: Models IBM System Networking RackSwitch G8264/G8264T Rear-to-Front Versions For ports located in the rear of the rack matching System x and IBM BladeCenter designs IBM System Networking RackSwitch G8264/G8264T Front-to-Rear Versions For ports located in the front of the rack matching airflow of IBM idataplex Interface options Forty-eight ports (10 GbE) G8264 (SFP+) and G8264T (10GBase-T) Four QSFP+ ports (40 GbE) One 10/100/1000 Ethernet RJ45 port for out-of-band management One USB port for mass storage device connection One mini-usb Console port for serial access Server-like port orientations, enabling short and simple cabling Dimensions: G8264: 17.3 inches wide, 19 inches deep, 1 RU high G8264T: 17.3 inches wide, 20.3 inches deep, 1 RU high Weight: G8264: 9.98 kg (22 lb) G8264T: 11.1 kg (24.5lb) Rack Installation Kit Generic Rack Mount Kit (2-post) Can be mounted vertically or horizontally LEDs System LEDs to indicate link status, fan, power, and stacking Airflow Front-to-rear or rear-to-front cooling Redundant variable hot-swap speed fans for reduced power draw Figure 4 shows the rear view of the IBM RackSwitch G8264. IBM System Networking RackSwitch G8264/G8264T 10

11 Figure 4. Rear view of IBM RackSwitch G8264 Power Dual hot swap power modules, 50-60Hz, VAC auto-switching per module Typical power consumption of 275 Watts (G8264) and 385 Watts (G8264T) Environmental specifications Temperature: Ambient operating: 0-40 ºC Relative humidity: Non-condensing, operating 10-90% Altitude: Operating 1,800 m (6,000 feet) Typical heat dissipation: 1127 BTU/hour ( G8264) and 1330 BTU/hour (G8264T) Mean time between failures (MTBF): G8264: 165,990 hours at 40 C Software features The software features, as of 6.8, are as follows: Security RADIUS TACACS+ SCP Wire Speed Filtering: Allow and Deny SSH v1, v2 HTTPS Secure BBI Secure interface login and password MAC address move notification Shift B Boot menu (Password Recovery/ Factory Default) VLANs Port-based VLANs 4096 VLAN ids supported 2048 Active VLANs (802.1Q) 802.1x with Guest VLAN Private VLAN Edge FCoE/Lossless Ethernet Data Center Bridging Priority Based Flow Control (PFC) Enhanced Transmission Selection (ETS) Data Center Bridge Exchange protocol (DCBX) FIP Snooping Fibre Channel over Ethernet (G8264 only) Converged Enhanced Ethernet IBM System Networking RackSwitch G8264/G8264T 11

12 Trunking LACP Static Trunks (EtherChannel) Configurable Trunk Hash algorithm Spanning Tree Multiple Spanning Tree (802.1 s) Rapid Spanning Tree (802.1 w) PVRST+ Fast Uplink Convergence BPDU guard Quality of Service QoS 802.1p (priority queues) DSCP remarking Metering Routing protocols RIP v1/v2 OSPF BGP High availability Layer 2 failover HotLinks Virtual Router Redundancy support (VRRP) Multicast IGMP Snooping v1, v2, and v3 with 2 K IGMP groups Protocol Independent Multicast (PIM Sparse Mode/Dense Mode) Monitoring Port mirroring ACL-based mirroring sflow Version 5 Virtualization VMready with VI API support vnic MIB support for SNMP (G8264 only) Clients IBM System Networking Element Manager iscli (Cisco-like) Scriptable CLI Browser-based client or Telnet Standard protocols IPv6 SNMP v1, v2c, and v3 RMON Secondary NTP Support DHCP Client DHCP Relay LLDP 128 K MAC Table 9 K Jumbo Frames 802.3X Flow Control Upgrades Upgrade firmware via serial or TFTP Dual software images Popular configurations This section describes common configurations for the G8264. Rack-optimized server aggregation 10-GbE attached rack servers The RackSwitch G8264 is an ideal networking device for port aggregation, allowing the consolidation IBM System Networking RackSwitch G8264/G8264T 12

13 of one to three racks full of servers before connecting to an upstream switch. High-concentration of rack-optimized servers, for example: IBM System x 1U servers with a 10 Gb adapter installed Easily supports 40 servers per rack. Easily supports up to 48 servers or more, depending on uplink bandwidth required across two racks, including storage or UPS. IBM System x 2U servers with a 10 Gb adapter installed Most clients will have up to twenty 2U servers per rack. With the G8264 switch being able to support up to 64 SFP+ ports, a client could easily leverage a switch across three racks of severs, and more likely two for redundancy. IBM BladeCenter using any of the following modules in the chassis BNT 1/10 Gb Uplink Ethernet Switch Module for IBM BladeCenter With only two 10 Gb SFP+ ports per chassis, clients with larger data centers could easily support 24 chassis or more per RackSwitch G8264. BNT Virtual Fabric 10 Gb Switch Module for IBM BladeCenter With support of up to ten 10 Gb SFP+ ports per switch, clients can easily support 4-6 chassis per RackSwitch, and if they are not concerned about oversubscription, they can support up to 24 or more per RackSwitch G Gb Ethernet Pass-Thru Module for IBM BladeCenter For many clients looking to use a pass-through module, upstream costs could be very expensive, especially if you are connecting to a core switch and you are looking at up to fourteen 10 Gb ports per chassis. The G8264 provides a much more cost-effective alternative and can support up to four fully populated IBM BladeCenter H chassis per RackSwitch. This is also a much better alternative for larger BladeCenter H environments compared to a smaller 24-port switch. Low-profile, high-performance, 48/64-port 10-GbE switch needed to perform aggregation function per rack. Figure 5 shows port aggregation, and Table 4 lists the features and benefits. Figure 5. Port aggregation IBM System Networking RackSwitch G8264/G8264T 13

14 Table 4. Features and benefits Features Line-rate, non-blocking, all 64-ports Deterministically low latency Support for IGMP Snooping and L3 forwarding Standards-based Layer 2/3 protocols; industry standard CLI Benefits Supports massive compute and virtualization workloads Faster application response times Enables high-bandwidth, low-latency multicast applications Interoperates with existing network; no learning curve Rack-optimized server aggregation logical design Design Goal: IBM RackSwitch G8264 (10 GbE) switch at Distribution Layer and IBM RackSwitch G8000/G8052 (1 GbE) at Edge/Access. The G8264 is also ideal at the distribution layer when you are looking to aggregate connections for access layer switches like the G8000 or G8052 which support forty-eight 1 Gb ports to the servers and four 10 Gb uplinks. In either scenario the G8264 provides exceptional value by being able to support: Up to 12 G8000/G8052 switches (576 servers) when using the four 10 Gb uplinks per G8000/G8052, while still having the four 40 Gb uplinks from the G8264 to the core Up to 16 G8000/G8052 switches (768 servers) when using the four 10 Gb uplinks per G8000/G8052 and using 10 Gb SFP+ break-out cables in the four 40 Gb ports with no uplinks to a core Additional details: Logical Configuration: Configure G8000/G8052 for Layer 2 and apply static routes for L3 forwarding Full Layer 2/3 Feature Set: STP, MSTP, RSTP, PVRST+; RIP v1/2, static routes, OSPF Security: 802.1X; RADIUS/TACACS+; Wire Speed ACLs, SSH v1, v2; HTTPS Secure BBI QoS: Up to eight queues per port, IEEE 802.1p and DiffServ prioritization Figure 6 shows aggregation option 2. IBM System Networking RackSwitch G8264/G8264T 14

15 Figure 6. Aggregation option node gigabit network: Using next-generation 64 port 1U switches The following high-level configuration is an example of how a configuration might look if the G8052 is used as leaf switches and the G8264 is used as a spine switch. All active links Traffic load balanced across all links using Layer 3 ECMP 64 RackSwitch G8052 Leaf Switches for 2560 non-blocking 1 GbE ports 48x 10/100/1000 server-facing ports each 4x 10 GBASE-SR fiber uplinks each Four RackSwitch G8264 spine switches for non-blocking core Figure 7 shows the 2560 node. Figure node Virtual Fabric configuration with IBM System x servers using the Emulex Virtual Fabric Adapter The following example is how an IBM Virtual Fabric implementation might look: IBM Virtual Fabric for IBM System x is built using industry standards and is the ideal solution for customers that require more than two NICs per server. Over the past couple of years many clients IBM System Networking RackSwitch G8264/G8264T 15

16 have seen their I/O requirements per server increase anywhere from 4 to 6 to 8 or even more NICs per server, especially with the adoption of virtualization. What IBM Virtual Fabric does is provide clients with the ability to leverage a virtual NIC approach leveraging 10 Gb Ethernet technology to help reduce cost and complexity while also achieving better performance and more flexibility. It provides the following benefits: Reduced costs: (Acquisition and operating) by using fewer adapters, cables, and upstream switch ports. Reduced complexity: Fewer items to manage, based on industry standards, making management easier with the addition of high availability and better security. Better performance: A significant amount more I/O bandwidth per server and lower latency than traditional 1 Gb Ethernet. Flexibility: The ability to carve up a dual-port 10 Gb adapter into 4-8 virtual NICs and create virtual pipes between the adapter and switch for higher availability and security. Not only can customers dynamically allocate I/O bandwidth to each virtual NIC, Virtual Fabric also provides the ability to change those allocations as needed. For example, a customer might have one configuration for workload during the day and another during the evenings. Virtual Fabric has the ability to make those changes on the fly without downtime. IBM Virtual Fabric is designed in partnership with Emulex. This solution requires the following components: Emulex 10 Gb Virtual Fabric Adapter for IBM System x. For more details, use the link below IBM System Networking RackSwitch G8264 Figure 8 shows the vnic. Figure 8. vnic IP Storage over 10 GbE: Changing the economics of storage G8264 benefits for IP Storage applications are as follows: Lossless Ethernet Fabric Low latency ideal for HPC clusters, cloud, and financial applications Line-rate, high-bandwidth performance Low-power consumption with fewer components Low-cost, pay-as-you-grow 10 Gb/40 Gb storage network Figure 9 shows the iscsi. IBM System Networking RackSwitch G8264/G8264T 16

17 Figure 9. iscsi This section describes common configurations for the G8264T. Rack-optimized server aggregation for rack servers using 10GBase-T The RackSwitch G8264T is an ideal networking device for port aggregation, allowing the consolidation of one to three racks full of IBM System x type servers before connecting to an upstream switch. The IBM System x servers could leverage a 10GBase-T adapter installed like the Broadcom NetXtreme II Dual Port 10GBase-T Adapter for IBM System x (Link: and then CAT6/6A cables can be used to connect upstream to the G8264T. The RackSwitch G8316 would be an attractive offering for 40Gb upstream connects from the G8264T helping clients create a flat two layer networking implementation as shown in Figure 10. IBM System Networking RackSwitch G8264/G8264T 17

18 Figure 10. G8316 Aggregation for multiple G8264T switches iscsi Storage Implementation If you need to leverage iscsi or other storage offerings based on 10GBase-T, e.g., the IBM System Storage DS3512, use the link below: The IBM RackSwitch G8264T is a good solution for connecting IBM servers and IBM System Storage DS3500, as shown in Figure 11. Figure 11. G8264T connected to DS3500 Related publications For more information, see the following IBM System Networking RackSwitch G8264 product publications: Application Guide ISCLI Command Reference BBI (browser-based interface) Quick Guide Menu-based CLI Command Reference IBM US Announcement Letter G m=enus G8264T - ENUS &appname=USN IBM System Networking RackSwitch G8264/G8264T 18

19 Notices This information was developed for products and services offered in the U.S.A. IBM may not offer the products, services, or features discussed in this document in other countries. Consult your local IBM representative for information on the products and services currently available in your area. Any reference to an IBM product, program, or service is not intended to state or imply that only that IBM product, program, or service may be used. Any functionally equivalent product, program, or service that does not infringe any IBM intellectual property right may be used instead. However, it is the user's responsibility to evaluate and verify the operation of any non-ibm product, program, or service. IBM may have patents or pending patent applications covering subject matter described in this document. The furnishing of this document does not give you any license to these patents. You can send license inquiries, in writing, to: IBM Director of Licensing, IBM Corporation, North Castle Drive, Armonk, NY U.S.A. The following paragraph does not apply to the United Kingdom or any other country where such provisions are inconsistent with local law: INTERNATIONAL BUSINESS MACHINES CORPORATION PROVIDES THIS PUBLICATION "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Some states do not allow disclaimer of express or implied warranties in certain transactions, therefore, this statement may not apply to you. This information could include technical inaccuracies or typographical errors. Changes are periodically made to the information herein; these changes will be incorporated in new editions of the publication. IBM may make improvements and/or changes in the product(s) and/or the program(s) described in this publication at any time without notice. Any references in this information to non-ibm Web sites are provided for convenience only and do not in any manner serve as an endorsement of those Web sites. The materials at those Web sites are not part of the materials for this IBM product and use of those Web sites is at your own risk.ibm may use or distribute any of the information you supply in any way it believes appropriate without incurring any obligation to you. Information concerning non-ibm products was obtained from the suppliers of those products, their published announcements or other publicly available sources. IBM has not tested those products and cannot confirm the accuracy of performance, compatibility or any other claims related to non-ibm products. Questions on the capabilities of non-ibm products should be addressed to the suppliers of those products. This information contains examples of data and reports used in daily business operations. To illustrate them as completely as possible, the examples include the names of individuals, companies, brands, and products. All of these names are fictitious and any similarity to the names and addresses used by an actual business enterprise is entirely coincidental. Any performance data contained herein was determined in a controlled environment. Therefore, the results obtained in other operating environments may vary significantly. Some measurements may have been made on development-level systems and there is no guarantee that these measurements will be the same on generally available systems. Furthermore, some measurement may have been estimated through extrapolation. Actual results may vary. Users of this document should verify the applicable data for their specific environment. COPYRIGHT LICENSE: This information contains sample application programs in source language, which illustrate programming techniques on various operating platforms. You may copy, modify, and distribute these sample programs in any form without payment to IBM, for the purposes of developing, using, marketing or distributing application programs conforming to the application programming interface for the operating platform for which the sample programs are written. These examples have not been thoroughly tested under all conditions. IBM, therefore, cannot guarantee or imply reliability, serviceability, or function of these programs. Copyright International Business Machines Corporation All rights reserved. Note to U.S. Government Users Restricted Rights -- Use, duplication or disclosure restricted by GSA ADP Schedule Contract with IBM Corp. IBM System Networking RackSwitch G8264/G8264T 19

20 This document was created or updated on March 5, Send us your comments in one of the following ways: Use the online Contact us review form found at: ibm.com/redbooks Send your comments in an to: Mail your comments to: IBM Corporation, International Technical Support Organization Dept. HYTD Mail Station P South Road Poughkeepsie, NY U.S.A. This document is available online at Trademarks IBM, the IBM logo, and ibm.com are trademarks or registered trademarks of International Business Machines Corporation in the United States, other countries, or both. These and other IBM trademarked terms are marked on their first occurrence in this information with the appropriate symbol ( or ), indicating US registered or common law trademarks owned by IBM at the time this information was published. Such trademarks may also be registered or common law trademarks in other countries. A current list of IBM trademarks is available on the Web at The following terms are trademarks of the International Business Machines Corporation in the United States, other countries, or both: BladeCenter Blade Network Technologies BNT IBM idataplex Power Systems Redpaper Redbooks (logo) System x VMready Microsoft, and the Windows logo are trademarks of Microsoft Corporation in the United States, other countries, or both. BNT, VMready, and Server Mobility are trademarks or registered trademarks of Blade Network Technologies, Inc., an IBM Company. Other company, product, or service names may be trademarks or service marks of others. IBM System Networking RackSwitch G8264/G8264T 20