Features. mini WDM. & Auto-negotiation

Transcription

1

2 mini WDM Model : W-mWDM1x1x inconformity to IEEE 802.3u 100 Base-TX/FX Standard & Auto-negotiation Fiber Optic mini Media (Dual Fiber) Model : W-mMD121x inconformity to IEEE 802.3u 100 Base-TX/FX Standard & Auto-negotiation W-mMD121x W-mWDM1x1x Standard Protocal IEEE Base-T standard IEEE 802.3u 100Base-TX/FX standard Connector oneutprj-45connector,onesc/stconnector Operation mode full duplex mode or half duplex mode Power supply parameter Internal : 5V DC 1~2A built-in: V AC DC100~380V Environmental temperature 0 o C - 40 o C Relative humidity 5%-90% TP cable Cat5 UTP cable Transfer fiber multi-mode 50/125 μm single-mode 9/125 μm Optical Fiber Feature Wave Length: 1310 Wave Length: 1310/1550nm (Single Mode) 1550/1310nm(Single Mode) Dimensions 26mm x 71mm x 94mm 46

3 HQ WDM Model : HQ-W-WDM121x in conformity to IEEE 802.3u 100 Base-TX/FX standard HQ Media (Dual Fiber) Model : HQ-W-MD121x in conformity to IEEE 802.3u 100 Base-TX/FX standard HQ-WMD121x HQ-W-WDM121x Standard Protocal IEEE Base-T standard IEEE 802.3u 100Base-TX/FX standard Connector oneutprj-45connector,onesc/stconnector Operation mode full duplex mode or half duplex mode Power supply parameter External : 5V DC 1~2A V AC DC100~380V Environmental temperature 0 o C - 60 o C Relative humidity 5%-90% TP cable Cat5 UTP cable Transfer fiber multi-mode 50/125 μm single-mode 9/125 μm Optical Fiber Feature Wave Length: 1310 Wave Length: 1310/1550nm : (Single Mode) 1550/1310nm(Single Mode) Dimensions 26mm x 71mm x 94mm 47

4 SFP Ethernet SFP Model : W-SFPMD es The MSFP is a media converter designed to convert 1000BASE-SX/LX/LH fiber to 1000Base-T copper media or vice versa. Designed under IEEE802.3ab 1000Base-T and IEEE802.3z 1000Base-SX/LX/LH standards, the MSFP is designed for use with multi-mode/single-mode fiber cable utilizing the LC- connector. It works at 850nm on both transmitting and receiving data when adopting multi-mode fiber and 1310nm on both transmitting and receiving data when adopting single-mode. This product supports IEEE802.3/IEEE 802.3u, IEEE 802.3ab 100Base-TX/FX standard/ IEEE 802.3z 1000Base-TX/FX standard, IEEE 802.3x as well as full duplex and half duplex mode Works at 1000Mbps in Full-Duplex mode for both TX port and FX port Supports auto MDI/MDIX for TX port Provides switch configuration of Force /Auto transfer mode for FX port FX port support hot-swappable Extends fiber distance up to 0.55km for multi-mode fiber and 20km for single-mode fiber Easy-to-view LED indicators provide status to monitor network activity easily External power supply Standards and Protocols IEEE 802.3ab, IEEE 802.3z, IEEE 802.3x Full Duplex Flow Control (IEEE 802.3x) Basic Function Extends fiber distance up to 0.5km using 50/125um fiber and 20km for single-mode fiber Ports mini-gbic 1port ( SFP Port ) 1000M RJ45 1 port (Auto MDI/MDIX) Wave Length Depends on the used SFP module Network Media 1000BASE-FX Multi-mode/Single-mode SFP module Network Media 1000BASE-T UTP category 5, 5e, 6 cable (Maximum 100m) EIA/TIA STP (maximum 100m) LED Indicators Support Link Fault Pass-through Dimensions (mm) 94.5(W) x 73.0(D) x 27.0(H) Power Supply External Power Adapter 5VDC Input Safety & Emission FCC, CE Operating Temperature: -10 o ~55 o C Environment Storage Temperature: -40 o ~70 o C Operating Humidity: 10%~90% non-condensing Storage Humidity: 5%~90% non-condensing 48

5 SFP Gigabit Module Model : W-SFP G Form Factor: SFP Device : Transceiver module Connectivity Technology: Wired Wavelength: 850nm/1300nm Max Distance: 500m Data Transfer Rate: 1Gbps Fiber : MMF Connector: Duplex LC DDM: Without DDM Operating Temperature: 0~70 o C Application: 1000BASE-LX Compliant with MSA SFP Specification Model : W-SFP121x 1.25G Form Factor: SFP Device : Transceiver module Connectivity Technology: Wired Wavelength: 1310nm Max Distance: 10, 20, 40, 60, 80 km Data Transfer Rate: 1Gbps Fiber : SMF Connector: Duplex LC DDM: Without DDM Operating Temperature: 0~70 o C Application: 1000BASE-LX Compli with MSA SFP Specification Model : W-WSFP1x1x 1.25G Fan Quantity: Fanless Standards : IEEE 802.3z, CSMA/CD, TCP/IP Power Supply: 3.3V, Cable: Single-mode Fiber Fiber : 9/125 um Single-mode Max. Cable Length: 3, 20, 40, 60km Data Rate: 1.25 Gbps, Port : LC Wave Length: A : Tx: 1310nm / Rx: 1550nm B : Tx: 1550nm / Rx: 1310nm Safety & Emission: FCC, CE Operating Temperature: 0 o C~70 o C (32 o C~158 o C) Storage Temperature: 40 o C~80 o C (-40 o C~176 o C) Operating Humidity: 10%~90% non-condensing Storage Humidity: 5%~90% non-condensing Model : W-SFP122x 2.5G Model : W-SFP126x 6.25G Model : W-SFP1210x 10G Compliant with ITU-T G.957, G.958 Up to 2.5Gb/s Data Links Multi-Source Package with Duplex LC Connector Eye Safety Designed to Meet Laser Class1, Compliant with IEC Single +3.3V Power Supply Hot-Pluggable Monitoring interface compliant with SFF-8472 Compliant with Bellcore TA-NWT RoHS Compliant Products Available Up to 6.25Gbps data links 300m with 50/ MHz MMF 850nm VSCEL laser Duplex LC Connector Hot-pluggable SFP+ footprint Single 3.3V power supply Operating temperature: Refer to Or dering Info RoHS Compliant Products Available Digital Diagnostic Monitor (DDM) Power Consumption < 1W Optical interface compliant to IEEE802.3ae 10GBASE-LR Electrical interface compliant to SFF-8431 Hot pluggable 1310nm DFB transmitter, PIN photo - detector Operating case temperature : 0 to 70 oc Low power consumption Applicable for 10km SMF connection All - metal housing for superior EMI performance Advance firmware allow customer system encryption information to be stored in transceiver Cost effective SFP+ solution, enables higher port densities and greater bandwidth 49

6 Mini Industrial Model : W-IMD1211 N0 tm and 1x 100M SC optical port back pressure for Half-duplex Mode & Auto-negotiation and Half-duplex Mode easy to use Mini WDM Industrial Model : W-IWDM1x11 N0 tm and 1x 100M SC optical port back pressure for Half-duplex Mode & Auto-negotiation and Half-duplex Mode easy to use 50

7 Interface Switch processing Scheme Transfer fiber Optical Fiber Feature MTBF Standards Compliance LED Indicators Power Product Size Working Environment Radiation Safety W-IMD1211N0 W-IWDM1x11N0 1x10/100M copper RJ45 ports 1x100M SC Optical fiber port Store-and-Forward multi-mode 50/125 μm single-mode 9/125 μm Dual Fiber SC Interface Single Fiber SC Interface Wave Length: 1310 Wave Length: 1310/1550nm : 1550/1310nm (Single Mode) (Single Mode) Transmission Distance:Single mode fiber 20km/40km/60km/80km/100km multi-mode 2km 300,000 hours IEEE802.3LCS/MA/CD IEEE802.3i:10Base-T IEEE802 3u:100-T: Power:PWR:Link:L/A Removale industrial 3-pin terminal block (Power adapter is not included in the package,need to order it separaelty) WxDxH:118x85x28mm Working Tempetature:30~70 o C Storage Tempetature:-40~75 o C Working Humidity:5%~95%(non-condersing) Storage Humidity:5%~95%(non-condersing) Working high:altitude of 3000m(10,000ft): storage high:altitude of 3000m(10,000ft): CE mark,commercial: FCC Part 15 Class B: VCCI Class B: EN (CISPR), Class B; CE Mark,commercial; CE/LVF EN60950 IP Camera mini wdm Industrial mini wdm converter NVR 51

8 Mini WDM Industrial 10/100 with PoE Model : W-IWDM1x1xP1 Model : W-IWDM1x2xP1 Model : W-IWDM1x4xP1 Industrial design 1x/2x/4x /100M Ethernet RJ45 ports with Auto Uplink tm 1x10/100M SC Slot. Supports IEEE802.3x flow control for Full-duplex Mode RJ-45 port supports Auto MDI/MDI-X & Auto-negotiation Automatic MAC address learning and aging Auto-Negotiation for Full-duplex Mode and Half-duplex Mode Plug and play, with LED Indicators for monitoring power/link/activity, easy to use. Provides DIN35 rail-type installation method Electromagnetic compatibility of up to 4 grade standard IP30 protection class Superior performance, Successfully used in industrial field Default PoE power supply type is end-span, mid-span optinal 1/2/4 PoE ports support both IEEE802.3af and IEEE802.3at standard 52

9 Product Name Interface Switching Performance Optical Fiber Feature MTBF Standards Compliance PoE LED Indicators Power Dimensions/Weight Working Environment Radiation Safety Single Fiber 10/100M Quasi Industrial 1x10/100M SC Fiber slot; 10/100 Base-T ports that support PoE Bandwidth: 1G (Non-blocking) Packet Buffer Memory:768kbit Switch Processing/Dual Fiber SC interface Single Mode Single/Dual Fiber SC interface Wave Length: 1310/1550nm Transmission Distance:Single mode fiber 20km/40km/60km/80km/100km multi-mode 2km 300,000 hours IEEE 802.3x Flow Control IEEE802.3i:10Base-T; IEEE802.3u:100Base-T; IEEE802.1af DTE Power via MDI IEEE 802.3af Power-over-Ethernet Max 15.4 watts (IEEE802.af) 1,2,4 PoE ports, auto detect AF/AT devices PoE Ports Out Voltage: DC48-57V Power pin Assignment:1/2+:3/6- Power : PWR;Link : PoE L/A Removale industrial 3-pin terminal block (Power adapter is not included in the package,need to order it separaelty) WxDxH:155x110x44mm,Weight: 500g Shell: IP30 protection grade, metal shell Installation Method: DIN rail installation Working Tempetature:30~70 o C Storage Tempetature:-40~75 o C Working Humidity:5%~95%(non-condersing) Storage Humidity:5%~95%(non-condersing) Working high:altitude of 3000m(10,000ft): storage high:altitude of 3000m(10,000ft): CE mark,commercial: FCC Part 15 Class B: VCCI Class B: EN (CISPR), Class B; CE Mark,commercial; CE/LVF EN

10 Mini Industrial 10/100/1000 with PoE Model : W-IWDM1x1xP1G Model : W-IWDM1x2xP1G Model : W-IWDM1x4xP1G Industrial design 1x/2x/4x /100M Ethernet RJ45 ports with Auto Uplink tm 1x1000M SC Slot. Supports IEEE802.3x flow control for Full-duplex Mode RJ-45 port supports Auto MDI/MDI-X & Auto-negotiation Automatic MAC address learning and aging Auto-Negotiation for Full-duplex Mode and Half-duplex Mode Plug and play, with LED Indicators for monitoring power/link/activity, easy to use. Provides DIN35 rail-type installation method Electromagnetic compatibility of up to 4 grade standard IP30 protection class Superior performance, Successfully used in industrial field Default PoE power supply type is end-span, mid-span optinal 1/2/4 PoE ports support both IEEE802.3af and IEEE802.3at standard 54

11 Product Name Interface Switching Performance Optical Fiber Feature MTBF Standards Compliance PoE LED Indicators Power Dimensions/Weight Working Environment Radiation Safety Single Fiber 1000M Quasi Industrial 1x1000M SC Fiber slot; 1000 Base-T ports that support PoE Bandwidth: 1G (Non-blocking) Packet Buffer Memory:768kbit Switch Processing/Dual Fiber SC interface Single Mode Single/Dual Fiber SC interface Wave Length: 1310Tx : 1550Rx nm (Single Mode) Transmission Distance:Single mode fiber 20km/40km/60km/80km/100km multi-mode 2km 300,000 hours IEEE 802.3x Flow Control IEEE802.3ab 1000Base-T IEEE802.3z 1000Base-SX/LX IEEE802.1af DTE Power via MDI IEEE 802.3af Power-over-Ethernet Max 15.4 watts (IEEE802.af) 1,2,4 PoE ports, auto detect AF/AT devices PoE Ports Out Voltage: DC48-57V Power pin Assignment:1/2+:3/6- Power : PWR;Link : PoE L/A Removale industrial 3-pin terminal block (Power adapter is not included in the package,need to order it separaelty) WxDxH:118x85x28mm (1 Port) WxDxH:118x85x28mm (2 Port) WxDxH:155x110x44mm (4 Port) Shell: IP30 protection grade, metal shell Installation Method: DIN rail installation Working Tempetature:30~70 o C Storage Tempetature:-40~75 o C Working Humidity:5%~95%(non-condersing) Storage Humidity:5%~95%(non-condersing) Working high:altitude of 3000m(10,000ft): storage high:altitude of 3000m(10,000ft): CE mark,commercial: FCC Part 15 Class B: VCCI Class B: EN (CISPR), Class B; CE Mark,commercial; CE/LVF EN

12 POE 100Base SFP (8 Port RJ45) Model : W-IWDM1281P1 Industrial design 8x /100M Ethernet RJ45 ports with Auto Uplink tm Provides DIN35 rail-type installation method 1xglgabit TP port 1xglgabit SFP slot Electromagnetic compatibility of up to 4 grade standard Supports IEEE802.3x flow control for Full-duplex Mode IP30 protection class andback pressure for Half-duplex Mode RJ-45 port supports Auto MDI/MDI-X & Auto-negotiation Default PoE power supply type is end-span, mid-span optinal Automatic MAC address learning and aging 8 PoE ports support both IEEE802.3af and IEEE802.3at standard Auto-Negotiation for Full-duplex Mode and Half-duplex Mode Plug and play, with LED Indicators for monitoring power/link/activity, easy to use. 56 Product Name Interface Switching Performance Optical Fiber Feature Network Medium MTBF Standards Compliance PoE LED Indicators Power Dimensions/Weight Working Environment Radiation Safety 10-port 10/100M Quasi Industrial PoE Switch 1xgigabit TP port 1xgigabit SFP slot. 8x10/100Base-T ports that support PoE. Bandwidth: 8.8G (Non-blocking) : Packet Buffer Memory: 1Mbit Switch Processing Scheme: Store-and-Forward Single Mode Single/Dual Fiber SFP slot Wave Length: 1310/1550nm Transmission Distance:Single mode fiber 20km/40km/60km/80km/100km multi-mode 2km 10BASE-T: Cat3/4/5 UTP (<100m) : 100BASE-TX: Cat5 or more UTP (<100m) 300,000 hours IEEE 802.3x Flow Control : IEEE802.3i:10Base-T; IEEE802.3u:100Base-T; IEEE802.3ab;1000Base- : IEEE802.1af DTE Power Via MDI IEEE 802.3af Power-over-Ethernet Max 15.4 watts (IEEE802.3af)Max 25.5 watts (IEEE 802.3at) 8 PoE ports, auto detect AF/AT devices PoE Ports Out Voltage: DC48-57V : Power pin Assignment:1/2+:3/6- Power:PWR;Link:PoE L/A Removale industrial 3-pin terminal block (Power adapter is not included in the package,need to order it separaelty) WxDxH:220x150x44mm,Weight: 900g Shell: IP30 protection grade, metal shell Installation Method: DIN rail installation Working Tempetature:30~70 o C : Storage Tempetature:-40~75 o C Working Humidity:5%~95%(non-condersing) : Storage Humidity:5%~95%(non-condersing) Working high:altitude of 3000m(10,000ft) : S torage high:altitude of 3000m(10,000ft): CE mark,commercial : FCC Part 15 Class B: EN (CISPR), Class B : VCCI Class B: CE Mark,commercial ; CE/LVF EN60950

13 Mini Industrial 10/100/1000Base (2 Port SFP) Model : W-IWDM1211P1G Industrial design 8x /1000M Ethernet RJ45 ports with Auto Uplink tm Provides DIN35 rail-type installation method 1xglgabit TP port 1xglgabit SFP slot Electromagnetic compatibility of up to 4 grade standard Supports IEEE802.3x flow control for Full-duplex Mode IP30 protection class andback pressure for Half-duplex Mode RJ-45 port supports Auto MDI/MDI-X & Auto-negotiation Default PoE power supply type is end-span, mid-span optinal Automatic MAC address learning and aging 8 PoE ports support both IEEE802.3af and IEEE802.3at standard Auto-Negotiation for Full-duplex Mode and Half-duplex Mode Plug and play, with LED Indicators for monitoring power/link/activity, easy to use. Product Name Interface Switching Performance Optical Fiber Feature Network Medium MTBF Standards Compliance PoE LED Indicators Power Dimensions/Weight Working Environment Radiation Safety 10-port 1000M Quasi Industrial PoE Switch 1xgigabit TP port 1xgigabit SFP slot. 8x1000Base-T ports that support PoE. Bandwidth: 8.8G (Non-blocking) : Packet Buffer Memory: 1Mbit Switch Processing Scheme: Store-and-Forward Single Mode Single/Dual Fiber SFP slot Wave Length: 1310 (for Dual Fiber) Wave Length: 1310/1550nm : 1550/1310nm(for Single Fiber) Transmission Distance:Single mode fiber 20km/40km/60km/80km/100km multi-mode 2km 10BASE-T: Cat3/4/5 UTP (<100m) : 100BASE-TX: Cat5 or more UTP (<100m) 300,000 hours IEEE 802.3x Flow Control : IEEE802.3i:10Base-T; IEEE802.3u:100Base-T; IEEE802.3ab;1000Base- : IEEE802.1af DTE Power Via MDI IEEE 802.3af Power-over-Ethernet Max 15.4 watts (IEEE802.3af)Max 25.5 watts (IEEE 802.3at) 8 PoE ports, auto detect AF/AT devices PoE Ports Out Voltage: DC48-57V : Power pin Assignment:1/2+:3/6- Power:PWR;Link:PoE L/A Removale industrial 3-pin terminal block (Power adapter is not included in the package,need to order it separaelty) WxDxH:220x150x44mm,Weight: 900g Shell: IP30 protection grade, metal shell Installation Method: DIN rail installation Working Tempetature:30~70 o C : Storage Tempetature:-40~75 o C Working Humidity:5%~95%(non-condersing) : Storage Humidity:5%~95%(non-condersing) Working high:altitude of 3000m(10,000ft) : S torage high:altitude of 3000m(10,000ft): CE mark,commercial : FCC Part 15 Class B: EN (CISPR), Class B : VCCI Class B: CE Mark,commercial ; CE/LVF EN

14 Industrial WDM 10/100 1/2/4/8 (Port RJ45) PoE Built-in efficient switching core to implement flow control and reduce broadcast packets Standard:IEEE802.3u, Auto-MDIX & Auto-negotiation, 100BASE-FX, IEEE802.3u 100BASE-TX, IEEE BASE-T IEEE802.3x 10/100Base-TX can automatically identify the direct line and cross-line with Various cards, switches, HUB and other Ethernet devices It uses a store-and-forward mechanism to avoid packet loss and error frames Support cut-through transmission and full-duplex flow control/ half-duplexback pressure mode 58 Model : WD-iN111 Design Level Access mode Standard Wavelength Transmission distance Port Conversion means Address table Buffer space Flow control 48V DC or 24V AC Wide power input, redundant power and reverse polarity protection -40 to 80 o C operating temperature to meet a variety of complex environments IP40 protection standard housing Power port and Ethernet port supports ESD protection and EFT protection Din rail and panel mounting for efficient usage Support single-fiber single-mode fiber port selection expanded the needs of users (optional) Support DIP switches for operation mode setting Industrial grade IP40 design standards 10/100 Mbps IEEE802.3u 100BASE-FX/TX, IEEE BASE-T, IEEE802.3x Flow Control, IEEE802.3at 1310nm/1550nm Single fiber single mode : 20/40/60/80/100 km Category-5 twisted pairs : 100m One RJ45 port : Connecting category-5 twisted pairs, EIA568A/B One optical port Single mode : SC (9/125 μm) Store and Forward mode or Cut-Through mode Full duplex : flow control Half duplex : back pressure BER <10-9 MTBF 50,000 hrs LED indicator Power supply Power consumption Operating temperature Operating humidity Storage temperature Storage humidity Dimensions (mm) Model : WD-iN114 Model : WD-iN112 Model : WD-iN118 Power Supply : PWR1, PWR2 : UTP Port: PoE1, L/A, 100M : Fiber port : F1 Power Input Range: 48V DC/24V AC, 6-PIN Terminals, Redundant dual power <5W(without PSE function) -40~80 o C 5%~95% non-condensing -40~80 o C 5%~95% non-condensing 140(W)x110(D)x40(H)

15 Industrial WDM WDM 10/100/1000 (1/2 Port RJ45 PoE) Model : WD-iN311 Built-in efficient switching core to implement flow control and reduce broadcast packets Standard:IEEE802.3u 100BASE-FX, IEEE802.3u 100BASE-TX, IEEE BASE-T IEEE802.3x 10/100Base-TX can automatically identify the direct line and cross-line is compatible with Various cards, switches, HUB and other Ethernet devices It uses a store-and-forward mechanism to avoid packet loss and error frames Support cut-through transmission and full-duplex flow control/half-duplex back pressure mode Design Level Access mode Standard Wavelength Transmission distance Port Conversion means Address table Buffer space Flow control 48V DC or 24V AC Wide power input, redundant power and reverse polarity protection -40 To 80 o C operating temperature to meet a variety of complex environments IP40 protection standard housing Power port and Ethernet port supports ESD protection and EFT protection Din rail and panel mounting for efficient usage Support single-fiber single-mode fiber port selection expanded the needs of users (optional) Support PoE power supply up to 25.5W Industrial grade IP40 design standards 10/100Mbps IEEE BASE-T, IEEE802.3u 100BASE-TX/FX, IEEE802.3ab 1000BASE-T, IEEE802.3z 1000BASE-SX/LX, IEEE802.3x Flow Control, IEEE802.3at PSE 1310nm/1550nm Single fiber single mode : 20/40/60/80/100 km Category-5 twisted pairs : 100m One/Two RJ45 port : Connecting category-5 twisted pairs, EIA568A/B One optical port Single mode : SC (9/125 μm) Store and Forward mode Full duplex : flow control Half duplex : back pressure BER <10-9 MTBF 50,000 hrs LED indicator Power supply Power consumption Operating temperature Operating humidity Storage temperature Storage humidity Dimensions Model : WD-iN312 Power Supply : PWR1, PWR2 UTP Port: PoE1, L/A, 100M Fiber port : F1 Power Input Range: 48V DC/24V AC, 6-PIN Terminals, Redundant dual power <5W(without PSE function) -40~80 o C 5%~95% non-condensing -40~80 o C 5%~95% non-condensing 140mm(W)x110mm(D)x40MM(H) 59

16 Industrial Media 10/100/1000 (2 Port RJ45 PoE) Model : WD-iN322 Dual fiber port redundancy available with DIP switch Built-in efficient switching core to implement flow control and reduce broadcast packets Protocol support : IEEE BASE-T, IEEE802.3u 100BASE-TX/FX, IEEE802.3ab 1000BASE-T, IEEE802.3z 1000Base-SX/LX, IEEE802.3x Flow Control, IEEE802.3at PSE 10/100/1000Base-TX can automatically identify the direct line and cross-line,is compatible with Various cards, switches, HUB and other Ethernet devices Take store-and-forward mechanism to avoid packet loss and error frames Provide four independent 10M/100Mbps/1000Mbps self-adaptive twisted pair ports; realize Ethernet port redundancy and multiple Users access. Support up to 1536 bytes packet. Support full-duplex flow control/half-duplex back pressure mode 12V to 48V DC or 24V AC Wide power input, redundant power and reverse polarity protection -40 To 80 o C operating temperature to meet a variety of complex environments IP40 protection standard housing Supports ESD protection and EFT protection Din rail or panel mountable. Support single-fiber single-mode fiber port selection expanded the needs of users (optional) 12 Gpbs back plane bandwidth, 1k MAC address automatic learning and 512 kb internal cache for data buffer Design Level Access mode Standard Wavelength Transmission distance Port Conversion means Address table Buffer space Flow control Fiber Obtic Industrial grade IP40 design standards 10/100Mbps IEEE BASE-T, IEEE802.3u 100BASE-TX/FX, IEEE802.3ab 1000BASE-T, IEEE802.3z 1000BASE-SX/LX, IEEE802.3x Flow Control, IEEE802.3at PSE 1310nm/1550nm Single fiber single mode : 20/40/60/80 km Category-5 twisted pairs : 100m Two RJ45 port: Connecting category-5 twisted pairs, EIA568A/B One optical port Single mode : SC (9/125 μm) Store and Forward mode Full duplex : flow control Half duplex : back pressure BER <10-9 MTBF 50,000 hrs LED indicator Power supply Power consumption Operating temperature Operating humidity Storage temperature Storage humidity Dimensions Power Supply : PWR1, PWR2 (1~2)UTP Port: PoE, L/A, 1000 Fiber port: SD Power Input Range : 12~48V DC/24V AC, 6-PIN Terminals, Redundant dual power <5W(without PSE function) -40~80 o C 5%~95% non-condensing -40~80 o C 5%~95% non-condensing 140mm(W)x110mm(D)x40MM(H) 60

17 Chassis Media Model : W-MDCHASSIS management with optical fiber products. signals caused by the power suply. the same time The modules can be different Capacity Structure with each other offer the satnd-by power supply Three years guarantee, and maintenances for the whole life 14 slots Available. every 10/100m converter, every 10/100/1000m 2U high : 19 inch standard design Power supply Input : AC 100~260V,50~60Hz Output : DC +5V 12A Switching tme < 5 Back wave loss > 55 Max input optical power 500 Switching life > 1000tlmes Optical connector type FC/APC or SC/APC Supply voltage AC160V - 250V (50Hz) /DC - 48V Consumption < 2 Operating temperatuer Max relative humidity for working Max 95% No condensation Storage Temperature Max relative humidity for storage Max 95% No condensation Dimensions (mm) 483(W)x 270(L) x 44(H) 61

18 Fiber Obtic HDMI Fiber Optic Transmission Model : W-WDMHDMI Both Optic-fiber transmission and Ethernet Transmission. Support point-to-point mode, one point-to-many mode and cascaded transmission mode. Built-in IR remote control function, you can control the set-top box at the receiving site using the IR remote control. Pure hardware design, just plug and play, no need to install extra software. Video Resolution Audio 32kHz - 48kHz Infrared Support HDMI Version HDMI 1.3 HDCP Version HDCP 1.2 Power input AC input : 5V Max Power Consumption DTHF104 : 5W DTHF104 : 5W Operating Temperature/Humidity 0-70 / 10% -80% RH (no condensation) Storage Temperature/Humidity / 5% -90% RH(no condensation) 62