10/100M Ethernet Media Converter.

Transcription

1 Media Converter 10/100M 10/100M Ethernet Media Converter. Product introduction 10/100M Fast Ethernet Media Converter, relies on its unique function of optical-electricity LFA (Link Failure Alert) to realize the extension of LAN Ethernet. Ethernet Media Converter achieves the interconversion of 10/100Base-TX UTP Cable electrical signal with 100Base-FX optic cable. It extends the network transmission range from 100m, the limit of copper Cable, to 120Km on fiber. It adopts Store and Forward mode or Cut-Through mode to realize the data transmission between network connection media of optical fiber and electricity. It supports optical transmission under single-fiber, dual-fiber single mode and multi mode. Features Auto-Negotiation (802.3u) for 10/100Base-TX for network upgrade. Built in effective switching core for flow control, reduce broadcast packet Support Full/half duplex self-adaptive transmission mode and auto-negotiations Support Automatically detecting and configuring the twisted pair port on the converter to the correct MDI or MDI-X Configuration, convenient for system debug and installation Support Link Failure Alert (LFA), Allows for quick diagnosis and resolution of network problems Support full/half duplex operation for each TP switched port Support 10/100Mbps Store and Forward mode or Cut-Through mode operation Optical interface supports 100Base-FX, and fixed 100Mbps full duplex operation Support low delay transmission Support 1600 bytes for Cut-Through mode Support 802.1Q VLAN tagged packets transmission Support QoS, ensure VOIP data package transmission

2 Ultra low power dissipation (<2W), low heat generation, enabled steady operation over a long time Support the port choice of dual-fiber multi-mode, dual-fiber single mode and single fiber single mode, which expands the customers requirements Specifications Parameters Specification Access mode 10/100Mbps IEEE Base-T Ethernet,IEEE802.3u,100Base- Standard TX/FX Fast Ethernet, IEEE802.3x Flow control Wavelength 850nm/1490nm/1310nm/1550nm Dual-fiber, single Fiber multi-mode :2Km, Dual-fiber single mode :20/40/60/80/100/120Km, Transmission range single fiber single mode :20/40/60/80/100/120Km CAT 5 UTP, CAT 6 UTP 1 RJ45 connector: connect STP/UTP CAT 5 twisted pair 1 optical interface : multi-mode SC or ST optical interface ( fiber size 50//125μm, 62.5/125μm) FX and TX Ports Single mode SC/FC optical interface ( fiber size 9/125μm) Single fiber single mode SC/FC optical interface ( fiber size 9/125μm) Conversion mode Store and Forward mode or Cut-Through mode Flow control Full duplex: flow control, half-duplex Bit error rate: <10-9 MTBF 100 thousand hours. POWER(power supply), FX LINK/ACT(optical fiber connected/action) FDX(FX full duplex ), TX LINK/ACT(twisted pair LED indicator lamp connected/action) TX 100( twisted pair 100M transmission rate), FX 100(optical fiber 100M transmission rate) Power adapter: input: AC 90~264V / DC36~60V POWER output:dc5v 1A power consumption <2W Operating -10~55 temperature Working humidity 5%~90% Storage temperature -40~70 Storage temperature 5%~90% no condensation

3 Media Converter with SFP module 10/100/1000M SFP Media Converter Overview 10/100/1000M SFP Optical Media Converter, also called Ethernet to fiber Converter or copper to fiber converter, supports two types media for network connection such as 10/100Base-TX and 100Base-FX. The media converter is designed with a switch controller and buffer memory that connects two types segments to operate smoothly, the flexible SFP slot design makes it easy for users to use different SFP modules according to their needs. With internal or external power unit, it provides good stability and reliability. Features Standards: IEEE 802.3/802.3u 10/100/1000Base-TX; 1000Base-FX High performance data transmission Wide dynamic range of IP data packet Comprehensive LED support Standard Single mode fiber, transmission distance up to 120Km One RJ45 100Base-TX ports&one SFP slot Auto Half/Full Duplex data mode Auto MDI/MDIX provides automatic cross CE,FCC,ROHS compliant 2-year warranty Technical Specifications

4 Parameter Specifications Standard IEEE 802.3/802.3u 10/100/1000Base-TX; 1000Base-FX Optical interface LC Wavelength 850nm/1310nm/1550nm(Option) Ethernet connector One RJ45 connector, connected to STP/UTP category-5 twisted pair One SFP Port UTP Cable Cat. 5 cable up to 100m Data Transfer Rate 200Mbps for full-duplex at 100Mbps speed TP Flow Control N Way auto-negotiation Fiber Flow Control N Way at full-duplex mode General characteristics Power Requirement 220V( V) AC, 50Hz DC:48VDC Operation -10 C 55 C temperature Operating humidity 5%~90% Storage temperature -40 C - 70 C Humidity 5% - 90% non-condensing Dimensions 26mm (H) * 70mm (W) * 94 mm (D) 4-Port Gigabit UTP+ 2 SFP Slot Ethernet Switch Overview 4-Port Gigabit Ethernet Switch is equipped with 4-port 10/100/1000M UTP ports and 2-port 1000M SFP slot. End user may choose different 1000M SFP module according to his demand, such as 1000Base-T,1000Base-SX or 1000Base-LX etc. The product is of compact size, stable performance, excellent quality. It is widely applied in small or medium Optical Fiber Ethernet network. Feature Switch Ethernet signals among 10/100/1000M UTP ports (T) and 1000M Optical Fiber Interfaces (X) Auto negotiation function, supports UTP ports 10/100/1000M and Full Duplex/Half Duplex autonegotiation SFP slot supports 1000M and Full Duplex mode. Supports flow control and broadcast storm protection. Supports VLAN and QoS. Supports max 10K bytes frame. low power consume (4W), low heat, and good reliability.

5 Specifications Operating standards:ieee802.3z/ab,10/100/1000base-t and 1000Base-SX/LX MAC address table: 1K Frame buffer memory:1mkb Switching capacity:12g Connector: UTP:RJ-45,10/100/1000Mbps; SFP slot:1000mbps; Cable:UTP:Cat.5 or 6 UTP(the max distance up to 100m) Multimode Fiber:50/125,62.5/125μm(the max distance up to 224/550m) Singlemode Fiber:8/125,8.7/125,9/125μm(the max distance up to 10~100 km) Flow control:full Duplex: IEEE802.3x flow control; Half Duplex: back pressure flow control LED:PWR,F1 Link/Act,F2 Link/Act;TP1~TP4 Link/Act,TP1~TP4 100,TP1~TP4 1000; Power Requirement: AC220V( V),50~60Hz; DC:5V,2A Ambient Temperature::0 ~ +50 ; Storage Temperature::-20 ~ +70 ; Humidity:5% ~ 90%; Dimensions:25(high) 180(width) 100(length)mm;

6 10/100M 4TP+2 SFP Switch Introduction 4x 10/100Mbps TP ports + 2X 100Mbps SFP fiber Ethernet switch. The TP ports can auto-detect 10/100Mbps, Half/Full duplex and MDI/MDI-X of the connecting devices. Two queues and up to 1522 bytes packet length is supported. Transferring according to the priority in ToS of IP in the packet. Can perfectly meet the "Quality of Service" request in the network. A clear indicator panel including link/activity LED, FDX (full duplex)/collision indicator LED for easy monitoring of network status. Features In conformity to IEEE Base-T standard; In conformity to IEEE 802.3u 100 Base-TX/FX standard; Supports 1K capacity MAC address table; IEEE802.3 X for full duplex and back pressure flow control for half duplex; Every TP port can auto-detect MDI or MDI-X connection, no crossover cable is needed for switch/hub cascaded Forward 1552/1536 bytes packets for management; LED indicator to show the device s work status; VLAN function optional(built-in preset by factory In conformity to safety code of FCC and 15 CLASS A and CE Technical specifications 10/100 UTP Port 4 Fiber Port 2(SFP slot) Standards Compliance IEEE Base-T, IEEE 802.3u 100Base-TX/FX MAC address table 1K Connector UTP: RJ-45, 10/100Mbps Fiber slot: 100Mbps SC/ST/SFP optional Supported Cable UTP: Cat.5 UTP Multi-mode: 50/125, 62.5/125, 100/140μm Single mode: 8/125, 8.7/125, 9/125, 10/125μm Flow control Full Duplex: IEEE802.3x flow control Half Duplex: back pressure flow control Operation mode Full Duplex Mode or Half Duplex Mode LED Indicators PWR, F1 Link/Act, F2 Link/Act, TP1~TP4 Link/Act, TP1~TP4 100 Power Supply DC 5V1A Operating Temperature 0 ~ +60 Storage Temperature: 20 ~ +70

7 Humidity 5% ~ 90% Dimensions 25(H) 100(W) 180(D)mm 2-Port 10/100Base-TX + 1-Port 100Base-FX Media Converter and Media Converter Rack Dual Power Supply. Description HHD Series provides one 100M optical fiber ports and two 10/100M UTP ports. The two UTP ports can be support VLAN, and works as backup. HHD Series complies with IEEE802.3, IEEE802.3u, IEEE802.3x standards, it is designed to convert data signal between 10/100Base-Tx and 100Bas-Fx Fast Ethernet. It can transmit the traditional 100M up to 2km by multimode fiber cable or 120km by single mode fiber cable. The compact size can be mounted in our 14/16 slots rack chassis. Key Features With one fiber and two UTP ports, can convert Optical-Electric Ethernet signals between 10/100M UTP interface (TX) and 100M optical fiber interface (FX). Auto negotiation function allows UTP port to auto select 10M or 100M, and Full Duplex or Half Duplex. Support Flow control and Broadcast storm protection. Supporting the max 1536 bytes frame. Internal Circuit of prevented thunder could greatly reduce damage of the converter caused by thunderbolt induction. With LED indicators for monitoring the working status. 2-year warranty. Specification Operating standards: IEEE802.3u 100Base-TX and 100Base-FX

8 Connector: UTP: RJ-45, 10/100Mbps; Fiber: SC/FC/ST, 100Mbps (Full Duplex) Cable UTP cable: Cat. 5 (the max distance up to 100m) Fiber (multimode): 50/125, 62.5/125μm (the max distance up to 2km) Fiber (single mode): 8/125, 8.7/125, 9/125, 10/125μm (the max distance up to 120km) Flow control Full Duplex: IEEE802.3x flow control Half Duplex: bake pressure flow control LED Light: L/A-FX, FDX-FX, L/A-TP, SPD-TP,FDX-TP,PWR Power supply: AC85~240V, DC5V 1A; Environment temperature:0 ~ +50 Storage temperature:::-20 ~ +70 Humidity::5% ~ 90% Dimensions:26mm (H) * 70mm (W) * 94 mm (D)

9 HHD-120G-2 HHD-120G-20 HHD-120G-40 HHD-120G-60 HHD-120G-80 HHD-120G-100 HHD-120G-120 Part number HHD-110G-20A HHD-110G-20B HHD-110G-40A HHD-110G-40B HHD-110G-60A HHD-110G-60B HHD-110G-80A HHD-110G-80B HHD-110G-100A HHD-110G-100B HHD-220G-1 HHD-220G-2 HHD-220G-10 HHD-220G-20 HHD-220G-40 HHD-220G-60 HHD-220G-80 HHD-220G-100 HHD-210G-10A HHD-210G-10B HHD-210G-20A HHD-210G-20B Description 10/100 Base-TX/FX Media Converter 2Km SC Connector (Multimode) 10/100 Base-TX/FX Media Converter 20Km SC Connector 10/100 Base-TX/FX Media Converter 40Km SC Connector 10/100 Base-TX/FX Media Converter 60Km SC Connector 10/100 Base-TX/FX Media Converter 80Km SC Connector 10/100 Base-TX/FX Media Converter 100Km SC Connector (Single mode) 10/100 Base-TX/FX Media Converter 120Km SC Connector (Single mode) 10/100 Base-TX/FX Media Converter 20Km SC Connector (TX=1310 nm) 10/100 Base-TX/FX Media Converter 40Km SC Connector (TX=1310 nm) 10/100 Base-TX/FX Media Converter 60Km SC Connector (TX=1490 nm) 10/100 Base-TX/FX Media Converter 80Km SC Connector (TX=1490 nm) 10/100 Base-TX/FX Media Converter 100Km SC Connector (TX=1490 nm) Gigabit Ethernet 10/100/1000Mbps Media Converter 500m SC (Multimode 850nm) Gigabit Ethernet 10/100/1000Mbps Media Converter 2Km SC (Multimode 1310nm) Gigabit Ethernet 10/100/1000Mbps Media Converter 10km SC (Single Gigabit Ethernet 10/100/1000Mbps Media Converter 20km SC (Single Gigabit Ethernet 10/100/1000Mbps Media Converter 40km SC (Single Gigabit Ethernet 10/100/1000MbpsMedia Converter 60km SC (Single Gigabit Ethernet 10/100/1000Mbps Media Converter 80km SC (Single Gigabit Ethernet 10/100/1000MbpsMedia Converter 100km SC (Single Gigabit Ethernet 10/100/1000Mbps WDM Media Converter 10km SC (Tx = 1310nm) Gigabit Ethernet 10/100/1000Mbps WDM Media Converter 20km SC (Tx = 1310nm)

10 HHD-210G-40A HHD-210G-40B HHD-210G-60A HHD-210G-60B Part Number HHD-G1201-SFP HHD-G2201-SFP HHD-G1224-SFP HHD-G2224-SFP HHD-122G-2 HHD-122G-20 HHD-122G-40 HHD-122G-60 HHD-122G-80 HHD-122G-100 HHD-122G-120 HHD-122G-20A HHD-122G-20B HHD-122G-40A HHD-122G-40B HHD-122G-60A HHD-122G-60B HHD-124G-2 HHD-124G-20 HHD-124G-20A HHD-124G-20B HHD-G14M HHD-G16M Gigabit Ethernet 10/100/1000Mbps WDM Media Converter 40km SC (Tx = 1310nm) Gigabit Ethernet 10/100/1000Mbps WDM Media Converter 60km SC (Tx = 1310nm) Description 10/100M Media Converter with 1 SFP slot. 10/100/1000M Media Converter with 1 SFP slot. 10/100M Media Converter with SFP slot : 2FX + 4 TX 10/100/1000M Media Converter with SFP slot : 2 FX + 4 TX 2 x 10/100Base-TX/1 x FX Bridge Converter, 2Km SC/ST Connector (Multimode) 2 x 10/100Base-TX/1 x FX Bridge Converter, 20Km SC Connector 2 x 10/100Base-TX/1 x FX Bridge Converter, 40Km SC Connector 2 x 10/100Base-TX/1 x FX Bridge Converter, 60Km SC Connector 2 x 10/100Base-TX/1 x FX Bridge Converter, 80Km SC Connector 2 x 10/100Base-TX/1 x FX Bridge Converter, 100Km SC Connector 2 x 10/100Base-TX/1 x FX Bridge Converter, 120Km SC Connector 2 x 10/100Base-TX/1 x FX Media Converter, 20Km SC Connector (TX=1310nm/1550nm) 2 x 10/100Base-TX/1 x FX Media Converter, 40Km SC Connector (TX=1310/1550nm) 2 x 10/100Base-TX/1 x FX Media Converter, 60Km SC Connector (TX=1310/1550nm) 4 x 10/100Base-TX/1 x FX Media Converter Dual Fiber, 2Km SC Connector (Multimode) 4 x 10/100Base-TX/1 x FX Media Converter Dual Fiber, 20Km SC Connector 4 x 10/100Base-TX/1 x FX Media Converter Single Fiber, 20Km SC Connector (TX=1310/1550nm) 14 Slots Media Converter Rack, For Fiber Media Converters, Dual Power Supply Included - AC/DC. 16 Slots Media Converter Rack, For Fiber Media Converters, Dual Power Supply Included - AC/DC.