HUAWEI. Quidway Full Series Ethernet Routing Switches HUAWEI

Transcription

1 HUAWEI T e c h n o l o g i e s Quidway Full Series Ethernet Routing Switches HUAWEI

2

3 q~ääé=çñ=åçåíéåíë=n Quidway S2000-EI Series Intelligent Layer 2 Ethernet Switches... 1 Quidway S3026G/T/C Intelligent Layer 2 Ethernet Switches... 9 Quidway S3026C-PWR Intelligent PoE Switch Quidway S3050C Intelligent Layer2 Ethernet Switch Quidway S3528G/P S3552G/P S3552F Intelligent Routing Switches Quidway S3526C Intelligent Routing Switch... 41

4 q~ääé=çñ=åçåíéåíë=o Quidway S3900 Series Intelligent Routing Switches Quidway S5000 Series Gigabit Intelligent Switches Quidway S5516 Gigabit Routing Switch Quidway S6500 Series Gigabit Routing Switches Quidway S8016 Multi-service Backbone Routing Ethernet Switch Quidway S8500 Series 10G Core Routing Switches... 73

5 H U A W E I T E C H N O L O G I E S Quidway S2000-EI Series Intelligent Layer 2 Ethernet Switches Introduction Quidway S2000-EI Series Ethernet Switches are Layer 2 (L2) wire speed products intended for the use in a network environment where high performance, high port density, and ease of installation are required. They are intelligent and can accept network management. The series include S2008-EI,S2016-EI and S2403H-EI.The S2000-EI series can be used in broadband Internet access, enterprise or campus network and multicast services, such as multicast audio/video and VoD. Quidway S2008-EI Quidway S2016-EI 1

6 Quidway S2403H-EI Product Features Abundant Interface Modules: Flexible Network Connectivity, with simple adaptation to network changes; Link Aggregation: The S2000-EI series support link aggregation to meet increased traffic needs without the need to purchase new equipment saving on CAPEX costs, Maintains service quality; and this series products support up to four aggregation groups, each comprising up to eight fixed ports; Packet Storm Suppression: All ports support unicast, multicast, and broadcast storm suppression based on bandwidth ratio, easy to control the storm, preventing disruption of network; High reliability: The S2000-EI series intelligent L2 switch supports STP/RSTP (Spanning Tree Protocol/Rapid Spanning Tree Protocol). Thus the redundancy backup and error tolerance capability of the link can be greatly improved to guarantee the network stability; Multiple Management Tools: Local and remote control like: CLI, Telnet, SNMP, RMON, Huawei Quidview NMS WEB network management, system log, and hierarchical alarms, Easy to manage, maintain and use reducing OAM cost overheads; Multiple QOS functions: Bandwidth Control (based on port, MAC address), Priority (based on VLAN port, 802.1p, and COS settings according to traffic classification), 802.1P and DSCP preference, 4 priority queues on each port, Queue 2

7 H U A W E I T E C H N O L O G I E S scheduling: WRR (Weighted Round Robin), HQ-WRR (High Queue-WRR), Guarantee's for SLA's, provides increased customer/user satisfaction, enables differentiation of service; High Security Features: Hierarchical user management and password protection, X authentications and packet filtering, prevents unauthorized accessing the network, keeping customer information safe; Extensive Remote Test and Diagnostic features: Simple troubleshooting provides quick and efficient resolution to problems reducing OPEXs; HGMP Huawei Cluster management: you can use the Huawei Group Management Protocol (HGMP), a L2 protocol of Huawei, to manage and configure your switches and transfer configuration responses. 3

8 Specifications Software Specifications Wire speed L2 switching Wire speed forwarding on all ports Switching capacity: S2008-EI: 6.4 Gbps S2016-EI: 6.4Gbps S2403H-EI: 9.6 Gbps Packet forwarding rate: S2008-EI: 1.19 Mpps S2016-EI: 2.53 Mpps S2403H-EI: 3.87 Mpps Switching mode VLAN Store and Forward Supports up to 512 VLANs (Virtual Local Area Networks) based on IEEE 802.1Q standard Supports port-based VLAN Supports GVRP (GARP VLAN Registration Protocol) Support Isolate-user-vlan Multicast GMRP (GARP Multicast Registration Protocol) IGMP(Internet Group Management Protocol) Snooping STP /RSTP Support the spanning tree protocol and the rapid tree spanning tree protocol Compliant with IEEE 802.1D and IEEE 802.1w Link aggregation Broadcast storm suppression Port mirroring Up to 4 aggregation groups, each containing up to 8 ports Bandwidth ratio-based suppression on all ports One-to-many port mirroring, that is, one monitoring port to multiple mirrored ports (no restriction) MAC address table Address self-learning IEEE 802.1D standard Up to 4 K MAC addresses Flow control IEEE 802.3x flow control (full duplex) Back-pressure based flow control (half duplex) Download and upgrade Supports X-Modem protocol to implement upgrade 4

9 H U A W E I T E C H N O L O G I E S Supports FTP and TFTP to implement upgrade Management Command Line Interface (CLI) configuration Remote configuration through Telnet Configuration through the Console port Simple Network Management Protocol (SNMP) Remote Monitor (RMON) 1, 2, 3 and 9 groups of MIB Huawei Quidview Network Management System (NMS) HGMPv2 System log Alarms of hierarchy Maintenance Supports debugging output Supports PING and Tracert Supports remote maintenance through Telnet QoS Supports bandwidth control (based on port, MAC address, etc) Supports 802.1p priority (based on port or MAC address) and DSCP (Differentiated Services Code Point) priority Bi-directional (outbound and inbound) port rate limitation, with a packet rate-limiting level in the range 1 to 127: The rate-limiting granularity is 64 kbps in the range 1 to 28 and 1 Mbps in the range 29 to 127 Provides 4 priority queues on each port Queue scheduling: Supports PQ (Priority Queuing), WRR (Weighted Round Robin) Security features Hierarchical user management and password protection Port-based and MAC-based 802.1X authentication Supports RADIUS (Remote Authentication Dial-In User Service) Remote power supply DC-powered S2016-EI can be the PD device of PoE 5

10 Hardware Specifications Description S2008-EI S2016-EI S2403H-EI Fixed ports 8 x 10/100 Mbps Ethernet 16 x 10/100 Mbps Ethernet 25 x 10/100 Mbps Ethernet electrical ports electrical ports electrical ports 1 Console port 1 Console port 1 Console port Quantity of expansion slot(s) Interface module options None 100Base-FX single 100Base-FX single mode/multi-mode module, 100Base-FX single mode/multi-mode module, 100Base-FX single medium-haul optical medium-haul module interface module, 100Base-T PoE interface module Switching capacity(bps) 6.4G 6.4G 9.6G Forwarding capability (PPS) 1.19M 2.53M 3.87M SDRAM 32M 32M 32M FLASH 4M 4M 4M Dimensions (W X H X D) 216mm X 40mm X 117mm 436mm X 42mm X 200mm 436mm X 42mm X 240mm weight <3kg 3kg 3kg Power supply The external power supply AC: compliant with the following Rated voltage: v AC.; 50/60 Hz specifications: Input rated voltage: Max. tolerance: V AC.; 50/60 Hz DC: V AC.; 50/60 Hz Rated voltage:-48 to -60 V DC Max. input tolerance: Max. Tolerance: -36 to -72 V DC V AC.; 50/60 Hz Output voltage: 12 V d.c S2008-EI only AC Output current: 1A Power 8W 12W 15W Operating Temperature 0 C to 45 C Humidity 10% - 90%, non-condensing 6

11 H U A W E I T E C H N O L O G I E S Modules S2008-EI: 8 fixed 10/100Base-TX auto-negotiation electrical ports and 1 Console port. S2016-EI: 16 fixed 10/100Base-TX auto-negotiation electrical ports, 1 expansion slot, and 1 Console port. supports the following interface modules: 1-port 100Base-FX single mode module; 1-port 100Base-FX single mode medium-haul module; 1-port 100Base-FX multi-mode module; 1-port 100Base-T PoE electrical interface module. S2403H-EI: 25 fixed 10/100Base-TX auto-negotiation electrical ports, 1 expansion slot, and 1 Console port. supports the following interface modules: 1-port 100Base-FX single mode module; 1-port 100Base-FX single mode medium-haul module; 1-port 100Base-FX multi-mode module. 7

12 Applications S2000-EI series support the following services: Internet broadband access; Networking of enterprise network and campus network; Deliver multicast service, multicast audio/video services. 8

13 H U A W E I T E C H N O L O G I E S Quidway S3026G/T/C Intelligent Layer 2 Ethernet Switches Introduction Quidway S3026G/T/C Ethernet Switches are box-type intelligent layer 2 wire-speed products with 10/100M aggregation in service provider data centers, metropolitan area networks and wiring closets. Quidway S3026G/T/C Intelligent Layer 2 series Ethernet switches contain three types: S3026G, S3026T and S3026C which provide small frame, additional features and redundant power supply (RPS) interface. Quidway S3026G Quidway S3026C 9

14 Quidway S3026T Product Features Abundant Interface Modules: Flexible Network Connectivity, with simple adaptation to network changes; Link Aggregation: Support link aggregation to meet increased traffic needs without the need to purchase new equipment saving on CAPEX costs, Maintains service quality; Packet Storm Suppression: All ports support unicast, multicast, and broadcast storm suppression based on bandwidth ratio, easy to control the storm, preventing disruption of network; Multiple Management Tools: Local and remote control like: CLI, Telnet, SNMP, RMON, WEB network management, system log, and hierarchical alarms, Easy to manage, maintain and use reducing OAM cost overheads; Multiple QOS functions: Bandwidth Control (based on port, MAC address), Priority (based on port or MAC address), 802.1P and DSCP preference, 4 priority queues on each port, Queue scheduling: PQ (Priority Queuing), WRR (Weighted Round Robin), Delay bounded WRR, Guarantee's for SLA's, provides increased customer/user satisfaction, enables differentiation of service and ensures that delay sensitive traffic is prioritized; Extensive Security Features: Such as L2-L7 Access Control Lists, VLANs, Prevents unauthorized accessing the network, keeping customer information safe; Extensive Remote Test and Diagnostic features: Simple troubleshooting provides quick and efficient resolution to problems reducing OPEXs; 10

15 H U A W E I T E C H N O L O G I E S 802.1x Server Support: Cost Savings as additional equipment not required; HGMP Huawei Cluster management: Saves IP address, simplifying OAM, Cost savings in the reduction of high-end or convergence products. 11

16 Specifications Software Specifications Wire speed L2 switching All the ports support wire speed forwarding 12.8Gbps switching capacity Forwarding packets rate 6.55Mpps Switching mode VLAN Store and Forward Supports up to 256 VLANs (Virtual Local Area Networks) based on IEEE 802.1Q standard Supports port-based VLAN Supports GVRP (GARP VLAN Registration Protocol) Multicast GMRP (GARP Multicast Registration Protocol) IGMP(Internet Group Management Protocol) Snooping STP /RSTP/MSTP Link aggregation Supports STP and RSTP and MSTP Supports up to 6 groups of FE port aggregation at most and each group can contain up to eight FE ports Supports the aggregation of up to two GE ports Packet storm suppression All the ports support the unicast, multicast, and broadcast storm suppression based on bandwidth ratio MAC address table Address self-learning IEEE 802.1D standard Supports up to 8K MAC address Download and upgrade Supports X-Modem protocol to implement upgrade Supports FTP and TFTP to implement upgrade Management Supports the Command Line Interface (CLI) configuration Supports remote configuration through Telnet Supports configuration via the Console port Supports SNMP (Simple Network Management Protocol) Supports RMON (Remote monitor) 1, 2, 3 and 9 groups of MIB Supports Huawei Quidview Network Management System Supports WEB network management Supports system log Supports hierarchical alarm 12

17 H U A W E I T E C H N O L O G I E S Supports HGMP V2 Supports HGMP V1 Server Supports remote dial through Modem Supports SSH Maintenance Supports debugging output Supports PING and Tracert Supports remote maintenance through Telnet Supports HGMP V2 Supports HGMP V1 Server QoS Supports bandwidth control (based on port, MAC address, etc) Supports priority (based on port or MAC address), supports 802.1P and DSCP preference Provides 4 priority queues on each port Queue scheduling: Supports PQ (Priority Queueing), WRR (Weighted Round Robin), Delay bounded WRR Security features Hierarchical user management and password protection IEEE 802.1X authentication Supports packet filtering 13

18 Hardware Specifications Description Processor SDRAM FLASH Buffer RAM Switching Capacity Forwarding Capacity Dimension(W X H X D) S3026G/T/C MIPS 150MHz 64M 8M 32M 12.8Gbps 6.55Mpps 436mm X 42mm X 245mm Input voltage DC: -40V ~ -60V AC: 100 ~ 240V RPS Power Max attitude 30 W 4000m Operating Temperature 0 C to 45 C Humidity 10% - 90%, non-condensing 14

19 H U A W E I T E C H N O L O G I E S Modules S3026G: 24 10/100Base-T ports; 1 RS232 local management interface(rj45); 2 GBIC slots, supports: GBIC 1000Base-T module(100m,rj45); GBIC 1000Base-T module(100m,rj45); GBIC multi mode optical module (850nm, 550m, SC) ; GBIC single mode optical module (1310nm, 10km, SC) ; GBIC single mode optical module (1310nm, 30km, SC) ; GBIC single mode optical module (1550nm, 40km,SC) ; GBIC single mode optical module (1550nm, 70km, SC) ; GBIC single mode optical module (1550nm, 100km, SC); 1000Base-T stack module. S3026T: 24 10/100Base-T ports; 1 RS232 local management interface(rj45); 2 10/100/1000BASE-T ports. S3026C: 24 10/100Base-T ports; 1 RS232 local management interface(rj45); 2 module slots, supports: 1-port 1000Base-T module; 1-port 1000Base-SX(500m)/LX(10km)/LH(40km)/ZX(70km) interface module; 1-port 100Base-FX SM interface module; 1-port 100Base-FX MM interface module ; 1-port stack module. 15

20 Applications S3026G/T/C support the following services: Broadband Residential Area Ethernet Switch; Networking for Campus and Enterprise Network. 16

21 H U A W E I T E C H N O L O G I E S Quidway S3026C-PWR Intelligent PoE Switch Introduction Quidway S3026C-PWR PoE Switch a stackable, L2 wire-speed and 24-ports 10/100 PoE Ethernet switch in service provider data centers, metropolitan area networks and wiring closets. The S3026C-PWR can supply -48V DC power via the Ethernet twisted pair cable to the remotely-attached powered device (PD). Quidway S3026C-PWR Product Features Abundant Interface Modules: Flexible Network Connectivity, with simple adaptation to network changes; Link Aggregation: Supports link aggregation to meet increased traffic needs without the need to purchase new equipment saving on CAPEX costs, Maintains service quality; Packet Storm Suppression: All ports support unicast, multicast, and broadcast storm suppression based on bandwidth ratio, easy to control the storm, preventing disruption of network; Multiple Management Tools: Local and remote control like: CLI, Telnet, SNMP, RMON, WEB network management, system log, and hierarchical alarms, Easy to manage, maintain and use reducing OAM cost overheads; Multiple QOS functions: Bandwidth Control (based on port, MAC address), Priority (based on port or MAC address), 802.1P and DSCP preference, 4 priority queues on each port, Queue scheduling: PQ (Priority Queuing), WRR (Weighted Round Robin), Delay bounded WRR, Guarantee's for SLA's, provides increased customer/user satisfaction, enables differentiation of service and ensures that delay sensitive traffic is prioritized; 17

22 Extensive Security Features: Such as L2-L7 Access Control Lists, VLANs, Prevents unauthorized accessing the network, keeping customer information safe; Extensive Remote Test and Diagnostic features: Simple troubleshooting provides quick and efficient resolution to problems reducing OPEXs; 802.1x Server Support: Cost Savings as additional equipment not required; HGMP Huawei Cluster management: Saves IP address, simplifying OAM, Cost savings in the reduction of high-end or convergence products. Specifications Software Specifications Wire speed L2 switching All the ports support wire speed forwarding 12.8Gbps switching capacity Forwarding packets rate 6.55Mpps Switching mode Store and Forward VLAN Supports up to 256 VLANs (Virtual Local Area Networks) based on IEEE 802.1Q standard Supports 4K VLAN Transparent Transfer Supports port-based VLAN Supports Isolate-user-vlan Supports GVRP (GARP VLAN Registration Protocol) Multicast GMRP (GARP Multicast Registration Protocol) IGMP(Internet Group Management Protocol) Snooping STP /RSTP/MSTP Link aggregation Supports STP and RSTP and MSTP Supports up to 6 groups of FE port aggregation at most and each group can contain up to eight FE ports Supports the aggregation of up to two GE ports. Packet storm suppression All the ports support the unicast, multicast, and broadcast storm suppression based on bandwidth ratio. MAC address table Address self-learning IEEE 802.1D standard Supports up to 8K MAC address 18

23 H U A W E I T E C H N O L O G I E S Download and upgrade Supports X-Modem protocol to implement upgrade Supports FTP and TFTP to implement upgrade Management Supports the Command Line Interface (CLI) configuration Supports remote configuration through Telnet Supports configuration via the Console port Supports SNMP (Simple Network Management Protocol) Supports RMON (Remote monitor) 1, 2, 3 and 9 groups of MIB Supports Huawei Quidview Network Management System Supports WEB network management Supports system log Supports hierarchical alarm Supports HGMP V2 Supports HGMP V1 Server Supports remote dial through Modem Supports SSH Maintenance Supports debugging output Supports PING and Tracert Supports remote maintenance through Telnet Supports HGMP V2 Supports HGMP V1 Server QoS Supports bandwidth control (based on port, MAC address, etc) Supports priority (based on port or MAC address), supports 802.1P and DSCP preference Provides 4 priority queues on each port Queue scheduling: Supports PQ (Priority Queueing), WRR (Weighted Round Robin), Delay bounded WRR Security features Hierarchical user management and password protection IEEE 802.1X authentication Supports packet filtering 19

24 Hardware Specifications Description S3026C-PWR Processor MIPS 150MHz SDRAM 64M FLASH 8M Buffer RAM 32M Switching Capacity 12.8Gbps Forwarding Capacity 6.55Mpps Dimension(W X H X D) 436mm X 42mm X 245mm Input voltage DC: -40V ~ -60V AC: 100 ~ 240V RPS PoE -48V output voltage and 15.4W per port of 10/100M 160W of Maximum output power, or 280W of Maximum output power with RPS compliant with IEEE802.3af supply Maximum 24 device with the maximum distance 100m Power 30 W Max attitude 4000m Operating Temperature 0 C to 45 C Humidity 10% - 90%, non-condensing Modules 24 10/100Base-T ports; 1 RS232 local management interface(rj45); 2 module slots, each supports: 1-port 1000Base-T module; 1-port 1000Base-SX(500m)/LX(10km)/LH(40km)/ZX(70km) interface module; 1-port 100Base-FX SM interface module; 1-port 100Base-FX MM interface module ; 1-port stack module Applications S3026C-PWR supports the following services: Broadband Residential Area Ethernet Switch; Networking for Campus and Enterprise Network. 20

25 H U A W E I T E C H N O L O G I E S Quidway S3050C Intelligent Layer2 Ethernet Switch Introduction Quidway S3050C Ethernet Switch is box-type layer 2 wire speed products which can be managed over the network. It provided 48 10/100M auto-sensing ports and two optional slots which support versatile uplinks and is specifically designed for network environments requiring cost effective, high port density, high performance, and easy installation solutions. Quidway S3050C Product Features High Density: Up to 48 10/100 Base-T ports saving on space and power; Link Aggregation: Support link aggregation to meet increased traffic needs without the need to purchase new equipment saving on CAPEX costs, Maintains service quality; Packet Storm Suppression: All ports support unicast, multicast, and broadcast storm suppression based on bandwidth ratio, easy to control the storm, preventing disruption of network; Multiple Management Tools: Local and remote control like: CLI, Telnet, SNMP, RMON, WEB network management, system log, and hierarchical alarms, Easy to manage, maintain and use reducing OAM cost overheads; 21

26 Multiple QOS functions: Bandwidth Control (based on port, MAC address), Priority (based on port or MAC address), 802.1P and DSCP preference, 4 priority queues on each port, Queue scheduling: PQ (Priority Queuing), WRR (Weighted Round Robin), Delay bounded WRR, Guarantee's for SLA's, provides increased customer/user satisfaction, enables differentiation of service and ensures that delay sensitive traffic is prioritized; High Security Features: Hierarchical user management and password protection 802.1X authentication and packet filtering, Prevents unauthorized accessing the network, keeping customer information safe; Huawei Primary VLAN: PVLAN (Primary VLAN) saves VLAN resources and provides User isolation; HGMP Huawei Cluster management: Saves IP address, simplifying OAM, Cost savings in the reduction of high-end or convergence products. Specifications Software Specifications Wire speed L2 switching All the ports support wire speed forwarding The switching capacity reaches 18.5Gbps Forward packets at the speed of 10.13Mpps Switching mode Store and Forward VLAN Supports up to 256 VLANs (Virtual Local Area Networks) based on IEEE 802.1Q standard Supports port-based VLAN Supports GVRP (GARP VLAN Registration Protocol) Multicast GMRP (GARP Multicast Registration Protocol) IGMP(Internet Group Management Protocol) Snooping STP/RSTP Supports STP and RSTP and conforming to IEEE802.1D and IEEE 802.1w Link aggregation Supports up to 6 groups of FE port aggregation at most and each group can contain up to eight FE ports Supports the aggregation of up to 2 GE ports Packet storm suppression All the ports support the unicast, multicast, and broadcast storm suppression based on bandwidth ratio MAC address table Address self-learning IEEE 802.1D standard Supports up to 8K MAC address Download and upgrade Supports X-Modem protocol to implement upgrade Supports FTP and TFTP to implement upgrade Management Supports the Command Line Interface (CLI) configuration Supports remote configuration through Telnet Supports configuration via the Console port 22

27 H U A W E I T E C H N O L O G I E S Maintenance QoS Security features Supports SNMP (Simple Network Management Protocol) Supports RMON (Remote monitor) 1, 2, 3 and 9 groups of MIB Supports Huawei Quidview Network Management System Supports WEB network management Supports system log Supports hierarchical alarm Supports HGMP V2 Supports HGMP V1 Server Supports remote dial through Modem Supports SSH Supports debugging output Supports PING and Tracert Supports remote maintenance through Telnet Supports HGMP V2 Supports HGMP V1 Server Supports bandwidth control (based on port, MAC address, etc) Supports priority (based on port or MAC address), supports 802.1P and DSCP preference Provides 4 priority queues on each port Queue scheduling: Supports PQ (Priority Queuing), WRR (Weighted Round Robin), Delay bounded WRR Hierarchical user management and password protection 802.1X authentication Supports packet filtering 23

28 Hardware Specifications Description S3050C Processor MIPS 150MHz SDRAM 64M FLASH 8M Buffer RAM 32M Switching Capacity 18.5Gbps Forwarding Capacity 10.13Mpps Dimension(W X H X D) 436mm X 42mm X 360mm Input voltage DC : -40V ~ -60V AC : 100 ~ 240V RPS Power 55W Max attitude 4000m Operating Temperature 0 C to 45 C Humidity 10% - 90%, non-condensing Modules S3050C: 48 10/100Base-T ports; 1 RS232 local management interface(rj45); 2 module slots, support: 1-port 1000Base-T interface module; 1-port 1000Base-SX(500m)/LX(10km)/LH(40km)/ZX(70km) interface module; 1-port 100Base-FX SM interface module; 1-port 100Base-FX MM interface module ; 1-port stack module. Applications S3050C supports the following services: Small and Medium sized Enterprise Networks; Residential Area with Broadband Access; Large Scale Enterprises and Campus Networks. 24

29 H U A W E I T E C H N O L O G I E S Quidway S3528G/P S3552G/P S3552F Intelligent Routing Switches Introduction Quidway S3552G / S3552P/ S3552F /S3528G and S3528P Ethernet Switches are layer 3 wire-speed products. This intelligent switch series, which can be managed over the network, is designed specially for the network environment requiring high performance, high port density and easy installation and adapts for MAN, enterprise network, campus network and broadcast access. Both switches have 48 10/100M Ethernet ports providing high port density saving on space and power with the difference between them being that the S3552G and S3528G has 4 GBIC ports, and the S3552P and S3528P has 4 SFP interfaces. Quidway S3552 series switches Front View Quidway S3552G Rear View 25

30 Quidway S3552P Rear View Quidway S3552F Quidway S3528G Quidway S3528P 26

31 H U A W E I T E C H N O L O G I E S Product Features Abundant Interfaces Types: Flexible Network Connectivity, with simple adaptation to network changes; Link Aggregation: Support link aggregation to meet increased traffic needs without the need to purchase new equipment saving on CAPEX costs, Maintains service quality; Packet Storm Suppression: All ports support unicast, multicast, and broadcast storm suppression based on bandwidth ratio, easy to control the storm, preventing disruption of network; Multiple Management Tools: Local and remote control like: CLI, Telnet, SNMP, RMON, WEB network management, system log, and hierarchical alarms, Easy to manage, maintain and use reducing OAM cost overheads; Extensive QOS functions: 8 priority queues and 3 discard priorities, CAR function (granularity of traffic limit 8kbps), Broadcast speed limit, Flexible queue dispatch algorithm, (SP, WRR and SP+WRR), WRED (Weighted Random Early Detection), Port traffic shaping, 802.1P and DSCP)/TOS priority, DSCP remarking, L2 to L4 packet filtering based on source MAC address, destination MAC address, source IP address, destination IP address, port, protocol, VLAN, VLAN range, VLAN address range and illegal frame. Supports Time Range. Guarantee's for SLA's, provides increased customer/user satisfaction, enables differentiation of service and ensures that delay sensitive traffic is prioritized; Multiple Security Features: Such as L2-L7 Access Control Lists, VLAN,s, Prevents unauthorized accessing the network, keeping customer information safe; Extensive Remote Test and Diagnostic features: Simple troubleshooting provides quick and efficient resolution to problems reducing OPEXs; 802.1x Server Support: Cost Savings as additional equipment not required; Huawei Primary VLAN: PVLAN (Primary VLAN) saves VLAN resource; HGMP Huawei Cluster management: Saves IP address, simplifying OAM. Specifications Software Specifications Wire speed switching All the ports support wire speed forwarding Backplane switching capacity is 32 Gbps S3552F and S3552GP Switching capacity is 17.6Gbps S3528GP Switching capacity is 12.8Gbps S3552F and S3552GP Packet forward speed is 13.1Mpps S3528GP Packet forward speed 9.53Mpps 27

32 Switching mode VLAN Support LAN protocol IP route DHCP Relay Reliability Multicast STP/RSTP/MSTP Link aggregation Broadcast storm suppression Mirroring MAC address table Flow control Download and upgrade Management Store and Forward Supports up to 4k VLANs (Virtual Local Area Networks) based on IEEE 802.1Q standard Supports port-based VLAN QinQ Supports GVRP (GARP VLAN Registration Protocol) Ethernet_II Ethernet_SNAP (Subnetwork Access Protocol) Static route RIP (Routing Information Protocol) v1/v2 OSPF (Open Shortest Path First) BGP(Border Gateway Protocol) Policy routing Equivalent route Capacity of IP routing table: 4k Route interface number:512 Support DHCP Relay Supports VRRP (Virtual Redundancy Routing Protocol) GMRP (GARP Multicast Registration Protocol) IGMP (Internet Group Management Protocol) Snooping PIM-DM (Protocol Independent Multicast-Dense Mode) PIM-SM (Protocol Independent Multicast-Sparse Mode) Supports STP/RSTP/MSTP and observe standards including IEEE 802.1D, IEEE 802.1w and IEEE 802.1s Supports FE link aggregation Supports GE link aggregation. Supports up to 7 aggregations (with each group containing up to 8 ports) All the ports support the multicast and broadcast storm suppression based on bandwidth ratio. Support mirroring based on traffic classification Supports port mirroring Address learning IEEE 802.1D standard Supports up to 12k MAC addresses Supports IEEE 802.3x flow control (full duplex) Supports Back-pressure based flow control (half duplex) Supports X-Modem protocol to implement download and upgrade Supports download and upgrade of FTP (File Transfer Protocol) and TFTP (Trivial File Transfer Protocol) Supports the Command Line Interface (CLI) configuration 28

33 H U A W E I T E C H N O L O G I E S Supports remote configuration through Telnet Supports configuration via the Console port Supports SNMP(Simple Network Management Protocol) Supports group 1, 2, 3 and 9 MIBs of RMON (Remote Monitoring) Supports Huawei Quidview Network Management System Supports WEB network management Supports system logging Supports user level alarm Supports HGMP (Huawei Group Management Protocol) V2 Supports HGMP V1 (function as Server) Maintenance QoS Security Features Supports remote dial through Modem Supports NTP Supports SSH Supports debugging output Supports PING (Packet Internet Groper) and Tracert Supports remote maintenance through Telnet Supports HGMP V1 (function as Server end) Supports 1K flow rules Supports CAR (Committed Access Rate) function, with the granularity of traffic limit being 8kbps Supports broadcast speed limit Supports 8 priority queues and 3 discard priorities Supports flexible queue dispatch algorithm, which can be simultaneously set based on both port and queue, support three modes: SP (Strict Priority), WRR (Weighted Round Robin) and SP+WRR Supports WRED (Weighted Random Early Detection) congestion avoidance al gorithm Supports port traffic shaping Supports 802.1P and DSCP (Differentiated Services Code Point)/TOS (Type Of Service) priority Supports DSCP remarking Supports L2 (Layer 2) to L4 (Layer 4) packet filtering function that is based on source MAC address, destination MAC address, source IP address, destination IP address, port, protocol, VLAN, VLAN range, VLAN address range and illegal frame. Supports Time Range User level management and password protection IEEE 802.1X Authentication Support Portal authentication 29

34 Hardware Specifications Description S3552G S3552P S3552F S3528G S3528P Fixed ports 48 10/100Mbps Ethernet ports 24 10/100Mbps Ethernet ports 4 GBIC ports 4 GBIC ports SDRAM FLASH Buffer RAM 64M 16M 32M Switching capacity 17.6Gbps 12.8Gbps Forwarding capability 13.1Mpps 9.53Mpps Dimensions 436mm X 42mm X 360mm 436mm X 86mm X 390mm 436mm X 42mm X 245mm (W X H X D) Input voltage AC: 100V to 240V DC: -48 to -60V RPS Power 45W 54W 40W Max attitude 4000m Operating Temperature 0 C to 45 C Humidity 10% - 90%, non-condensing Modules S3552G: 48 10Base-T/100Base-TX auto-negotiation Ethernet ports (RJ-45 connector), 4 GBIC module interfaces. GBIC Module includes : GBIC multi mode optical module (850nm, 550m, SC) ; GBIC single mode optical module (1310nm, 10km, SC) ; GBIC single mode optical module (1310nm, 30km, SC) ; GBIC single mode optical module (1550nm, 40km,SC) ; GBIC single mode optical module (1550nm, 70km, SC). 30

35 H U A W E I T E C H N O L O G I E S S3552P: 48 10Base-T/100Base-TX auto-negotiation Ethernet ports (RJ-45 connector), 4 SFP module interfaces. SFP Module includes: SFP multi mode optical module (850nm, 550m, LC) ; SFP single mode optical module (1310nm, 10km, LC); SFP single mode optical module (1310nm, 30km, LC); SFP single mode optical module (1550nm, 40km, LC); SFP single mode optical module (1550nm, 70km, LC). S3552F: 6 expansion slots and 4 GBIC, and each slots support: 8-port 100M single-mode/multi-mode modules ; 8-port 10Base-T/100Base-TX modules ; 8-port SFP 100M optical modules. GBIC Module includes : GBIC multi mode optical module (850nm, 550m, SC) ; GBIC single mode optical module (1310nm, 10km, SC) ; GBIC single mode optical module (1310nm, 30km, SC) ; GBIC single mode optical module (1550nm, 40km,SC) ; GBIC single mode optical module (1550nm, 70km, SC) ; GBIC single mode optical module (1550nm, 100km, SC). S3528G: 24 10Base-T/100Base-TX auto-negotiation Ethernet ports (RJ-45 connector), 4 GBIC module interfaces. GBIC Module includes : GBIC multi mode optical module (850nm, 550m, SC) ; GBIC single mode optical module (1310nm, 10km, SC) ; GBIC single mode optical module (1310nm, 30km, SC) ; GBIC single mode optical module (1550nm, 40km,SC) ; GBIC single mode optical module (1550nm, 70km, SC) ; GBIC single mode optical module (1550nm, 100km, SC). 31

36 S3528P: 24 10Base-T/100Base-TX auto-negotiation Ethernet ports (RJ-45 connector), 4 SFP module interfaces. SFP Module includes: SFP multi mode optical module (850nm, 550m, LC) ; SFP single mode optical module (1310nm, 10km, LC); SFP single mode optical module (1310nm, 30km, LC); SFP single mode optical module (1550nm, 40km, LC); SFP single mode optical module (1550nm, 70km, LC); SFP single mode optical module (1550nm, 100km, LC). Applications S3552G/P support the following services: Application in Metro Ethernet Network; Application in Medium and Small Enterprises and Branches of Large Enterprises Network; Application in Large-Scale Enterprise and Campus Network. S3552F supports the following services: Application in Metro Ethernet Network; Application in Medium and Small Enterprises and Branches of Large Enterprises Network; Application in Large-Scale Enterprise and Campus Network. S3552F supports the following services: Application in Metro Ethernet Network; Application in Medium and Small Enterprises and Branches of Large Enterprises Network; Application in Large-Scale Enterprise and Campus Network. 32

37 Multiple QOS functions: Bandwidth Control (based on port, MAC address), Priority (based on port or MAC address), 802.1P and DSCP preference, 2 priority queues on each port, Queue scheduling: PQ (Priority Queuing), WRR (Weighted Round Robin), Delay bounded WRR, Guarantee's for SLA's, provides increased customer/user satisfaction, enables differentiation of service and ensures that delay sensitive traffic is prioritized; Abundant Routing Protocol: Static routing, RIP V1/V2, OSPF V2, BGP V4, Strong Routing capability for large scale internetworking; Multiple Multicast Protocols: GARP Multicast Registration Protocol (GMRP), IGMP Snooping, PIM-DM/SM, Deliver L3 Multicast Services; High Security Features: Hierarchical user management and password protection 802.1X authentication and packet filtering, Prevents unauthorized accessing the network, keeping customer information safe. Specifications Software Specifications Wire speed layer 2 switching All ports support wire speed forwarding 12.8Gbps switching capacity Packet forwarding rate 6.55Mpps Switching mode Store and Forward VLAN Supports 256 VLANs in compliance with IEEE 802.1Q Port-based VLAN GARP VLAN Registration Protocol (GVRP) Supports isolate-user-vlan IP routing Static route Routing Information Protocol (RIP) v1/2 Open Shortest Path First (OSPF) Border Gateway Protocol (BGP) Supports 2K IP addresses forwarding table entries Reliability Virtual Redundancy Routing Protocol (VRRP) NTP (Network Time Protocol) Supports NTP Multicast GMRP (GARP Multicast Registration Protocol) IGMP (Internet Group Management Protocol) PIM-DM (Protocol Independent Multicast-Dense Mode) PIM-SM (Protocol Independent Multicast-Sparse Mode) STP /RSTP Supports STP and RSTP, in compliance with IEEE 802.1D and IEEE 802.1w Port aggregation Supports aggregation of up to 6 groups of FE ports and each group contains up to 8 aggregated ports Supports aggregation of up to 2 GE ports 34

38 Multiple QOS functions: Bandwidth Control (based on port, MAC address), Priority (based on port or MAC address), 802.1P and DSCP preference, 2 priority queues on each port, Queue scheduling: PQ (Priority Queuing), WRR (Weighted Round Robin), Delay bounded WRR, Guarantee's for SLA's, provides increased customer/user satisfaction, enables differentiation of service and ensures that delay sensitive traffic is prioritized; Abundant Routing Protocol: Static routing, RIP V1/V2, OSPF V2, BGP V4, Strong Routing capability for large scale internetworking; Multiple Multicast Protocols: GARP Multicast Registration Protocol (GMRP), IGMP Snooping, PIM-DM/SM, Deliver L3 Multicast Services; High Security Features: Hierarchical user management and password protection 802.1X authentication and packet filtering, Prevents unauthorized accessing the network, keeping customer information safe. Specifications Software Specifications Wire speed layer 2 switching All ports support wire speed forwarding 12.8Gbps switching capacity Packet forwarding rate 6.55Mpps Switching mode Store and Forward VLAN Supports 256 VLANs in compliance with IEEE 802.1Q Port-based VLAN GARP VLAN Registration Protocol (GVRP) Supports isolate-user-vlan IP routing Static route Routing Information Protocol (RIP) v1/2 Open Shortest Path First (OSPF) Border Gateway Protocol (BGP) Supports 2K IP addresses forwarding table entries Reliability Virtual Redundancy Routing Protocol (VRRP) NTP (Network Time Protocol) Supports NTP Multicast GMRP (GARP Multicast Registration Protocol) IGMP (Internet Group Management Protocol) PIM-DM (Protocol Independent Multicast-Dense Mode) PIM-SM (Protocol Independent Multicast-Sparse Mode) STP /RSTP Supports STP and RSTP, in compliance with IEEE 802.1D and IEEE 802.1w Port aggregation Supports aggregation of up to 6 groups of FE ports and each group contains up to 8 aggregated ports Supports aggregation of up to 2 GE ports 34

39 H U A W E I T E C H N O L O G I E S Broadcast storm suppression Port mirroring MAC address table Flow control Loading and upgrade Management Maintenance QoS Security features All ports support unicast/multicast/broadcast storm suppression based on band width percentage Supports mirroring based on traffic classification Address self-learning In compliance with IEEE 802.1D Maximum 8K MAC addresses IEEE 802.3x-compliant flow control (full duplex) Back-pressure based flow control (half duplex) Loading and upgrading with X-modem Loading and upgrading with FTP and TFTP Command line interface(cli) configuration Telnet remote configuration Console port configuration SNMP(Simple Network Management Protocol) RMON (Remote Monitoring) function and 1, 2, 3, or 9 MIB groups Supports QuidView NMS Supports CAMS (Comprehensive Access Management Server) Web management System log Hierarchical alarming HGMP v2 HGMP v1 (as server) Supports Modem dialup Supports SSH Debugging information output Ping and Tracert Telnet remote maintenance HGMP v2 HGMP v1 (as server) Bandwidth control (based on port and MAC address) 802.1P and DSCP priority (based on port and MAC address) Four priority queues at each port Queue scheduling algorithm: PQ (Priority Queuing), WRR (Weighted Round Robin) and Delay bounded WRR Hierarchical user management and password protection 802.1X authentication Portal authentication Packet filtering 35

40 Hardware Specifications Description S3526C SDRAM 64M FLASH 8M Buffer RAM 32M Switching Capacity 12.8Gbps Forwarding Capacity 6.55Mpps Expandable Slots 2 slots Dimension(W X H X D) 436mm X 42mm X 245mm Input voltage DC : -40V ~ -60V AC : 100 ~ 240V RPS Power 35W Max attitude 4000m Operating Temperature 0 C to 45 C Humidity 10% - 90%, non-condensing Modules S3526C: 24 fixed 10/100Base-T + 2 expandable slots, each slot supports: 1-port 1000Base-T interface module; 1-port GE SX(500m)/LX(10km)/LH(40km)/ZX(70km) optical interface module; 1-port FE SM/FM optical interface module; 1 port GE stack module. Applications S3526C supports the following services: Residential Area with Broadband Access; Small to Medium size Enterprise Network; Large enterprise and campus Network. 36

41 H U A W E I T E C H N O L O G I E S Quidway S3900 Series Intelligent Routing Switches Introduction Quidway S3900 Series Ethernet Switches are wire speed L2/L3 products. This intelligent switch series, which can be managed over the network, is designed specially for the network environment requiring high performance, high port density and easy installation. The series include S3924-SI, S3928P-SI, S3952P-SI, S3928P-EI and S3952P-EI. The S3900-SI series provide basic routing functions and service features and the S3900-EI series provide complex routing protocols and abundant service features. Quidway S3924-SI Quidway S3928P-SI 37

42 S3952P-SI S3928P-EI S3952P-EI 38

43 H U A W E I T E C H N O L O G I E S Product Features Abundant Interfaces Types: Flexible Network Connectivity, with simple adaptation to network changes; Link Aggregation: Support link aggregation to meet increased traffic needs without the need to purchase new equipment saving on CAPEX costs, Maintains service quality; Packet Storm Suppression: All ports support unicast, multicast, and broadcast storm suppression based on bandwidth ratio, easy to control the storm, preventing disruption of network; Multiple Management Tools: Local and remote control like: CLI, Telnet, SNMP, RMON, WEB network management, system log, and hierarchical alarms, Easy to manage, maintain and use reducing OAM cost overheads; Extensive QOS functions: 8 priority queues and 3 discard priorities, CAR function (granularity of traffic limit 8kbps), Broadcast speed limit, Flexible queue dispatch algorithm, (SP, WRR and SP+WRR), WRED (Weighted Random Early Detection), Port traffic shaping, 802.1P and DSCP/TOS priority, DSCP remarking, L2 to L4 packet filtering based on source MAC address, destination MAC address, source IP address, destination IP address, port, protocol, VLAN, VLAN range, VLAN address range and illegal frame. Support Time Range. Guarantee's for SLA's, provide increased customer/ user satisfaction, enables differentiation of service and ensures that delay sensitive traffic is prioritized; Multiple Security Features: Such as L2-L7 Access Control Lists, VLANs, Port Isolation, MAC Address Learning Limit, MAC Address and Port Binding, DUD authentication, AAA/RADIUS, IEEE 802.1X Authentication, Prevents unauthorized accessing the network, keeping customer information safe; Extensive Remote Test and Diagnostic features: Simple troubleshooting provides quick and efficient resolution to problems reducing OPEXs; 802.1x Server Support: Cost Savings as additional equipment not required; Routing & Multicast Features: Support Static Routing, RIP, OSFP, IGMP snooping, IGMP, PIM-DM, PIM-SM; Stack features: IRF constructs expandable resilient networks, manage multiple devices in a centralized manner, expand the number of ports and switching capacity, achieve high reliability of N + 1 redundancy; 39

44 Specifications Software Specifications Wire speed switching All the ports support wire speed forwarding Switching capacity is 12.9 Gbps Packet forward speed (24/28/52 ports): 3.57/9.52/13.09 Mpps Switching mode VLAN Store and Forward The S3900-SI series support up to 256 VLANs (Virtual Local Area Networks) based on IEEE 802.1Q standard The S3900-EI series support up to 4K VLANs based on IEEE 802.1Q standard Support port-based VLAN Voice VLAN IP route To discriminate and add IP telephony traffic to voice VLAN by MAC address Static route RIP (Routing Information Protocol) v1/v2 The S3900-EI series support OSPF (Open Shortest Path First) The S3900-EI series support Equal Cost Multi Paths (ECMPs) Capacity of IP routing table: S3900-SI 1K, S3900-EI 6K VLAN virtual interface The S3900 series support up to 64 DHCP Relay Support The S3900-EI series support in addition to the DHCP security features Reliability Multicast Support VRRP (Virtual Redundancy Routing Protocol) All support: IGMP (Internet Group Management Protocol) Snooping The S3900-EI series support as follows: Internet Group Management Protocol v1/ v2 (IGMPv1/v2) PIM-DM (Protocol Independent Multicast-Dense Mode) PIM-SM (Protocol Independent Multicast-Sparse Mode) STP/RSTP/MSTP Support STP/RSTP and observe standards including IEEE 802.1D IEEE 802.1w and IEEE 802.1s Link aggregation Support FE/GE link aggregation Up to 8 FE or 4 GE ports in each aggregation Number of aggregations: S3924-SI: up to 14 40

45 H U A W E I T E C H N O L O G I E S S3928P-SI: up to 14 S3952P-SI: up to 26 S3900-EI series: up to 32 Broadcast storm suppression Mirroring Port rate ratio and PPS based suppression Many-to-one port mirroring (multiple observed ports to one monitor port) Traffic mirroring MAC address table Address learning IEEE 802.1D standard Support up to 16K MAC addresses Flow control Support IEEE 802.3x flow control (full duplex) Support Back-pressure based flow control (half duplex) Loopback detection on ports To detect and alarm short circuit that occurs to the data receiving and sending wires on ports Download and upgrade Support X-Modem protocol to implement download and upgrade Support download and upgrade of FTP (File Transfer Protocol) and TFTP (Trivial File Transfer Protocol) Stack The S3900-SI series support VRP stack, up to 8 units The S3900-EI series support XRN, up to 8 units Management Configuration through the command line interface (CLI) Configuration through Telnet Configuration through the console port Simple Network Management Protocol (SNMP) Remote Monitoring ( RMON) 1/2/3/9 groups of MIBs Huawei Quidview NMS Web-based network management System log Hierarchical alarm Support SSH Maintenance Support debugging output Support remote maintenance through Telnet Support PING (Packet Internet Groper) and Tracert 41

46 In addition the S3900-EI series support multicast traceroute QoS / ACL Limitation on packet receiving/sending rate on ports Packet redirection Committed Access Rate (CAR), with the granularity of 64 kbps 8 output queues on each port Five scheduling algorithms that can be set based on port and queue at the same time: Strict Priority (SP), Weighted Round Robin (WRR), Weighted Fair Queue (WFQ), SP + WFQ, SP + WRR) Packet tagging based on 802.1p or DSCP preference Packet filter at the layers 2 through 4, providing filtering based on source/desti nation MAC address, source/destination IP address, port, protocol, VLAN, VLAN range, MAC address range, or invalid frame Time range setting QoS profile management, allowing QoS service scheme customization WRED Security Features Hierarchical user management and password protection IEEE 802.1x authentication AAA and RADIUS authentication MAC address learning limit Disconnect Unauthorized Device (DUD) authentication, implemented through setting MAC address learning limits and binding MAC addresses with ports Denial of Service (DoS) attack prevention MAC address black hole In addition the S3900-EI series support centralized MAC address authentication Other Features BOOTP NTP DHCP Client Web cache redirection UDP helper 42

47 H U A W E I T E C H N O L O G I E S Hardware Specifications Description S3924-SI S3928P-SI S3952P-SI S3928P-EI S3952P-EI Fixed ports 10/100Mbps Ethernet ports + SFP 1000Mbps ports SDRAM 64M FLASH 8/16M Buffer RAM 32M Switching capacity 12.9Gbps Forwarding capability 3.57 Mpps 9.52 Mpps Mpps 9.52 Mpps Mpps Dimensions (W X H X D) 440 x 43.6 x 260 mm (17.32 x 1.72 x in.) Input voltage The S3900-SI series are AC-powered and the S3900-EI series can be AC-powered or DC-powered. AC: Rated voltage: 100 to 240 V AC; 50 to 60 Hz Max. tolerance: 90 to 264 V AC; 50 to 60 Hz DC: Rated voltage: -48 to -60 V DC. Maximum voltage: -36 to -72 V DC. The S3900-EI series support RPS. Power 30W 40W 50W 40W 50W Weight 3kg 3.5kg 4Kg 3.5kg 4Kg Max attitude 4000m Operating Temperature 0 C to 45 C Humidity 10% - 90%, non-condensing Modules S3900-EI support the following service: Application in Residential Area with Broadband Ethernet Access; Application in Medium and Small Enterprises and Branches of Large Enterprises Network; Application in Large-Scale Enterprise and Campus Network. 43

48 IRF Fabric S3900 Link Aggregation Internet FrieWall S5600M/A5600 IRF Stack Application in S3900 Series Enhanced IRF (Intelligent Resilient Framework) is a technology to construct intelligent resilient framework. With IRF, you can connect multiple IRF-supported switches that are of the same type (called units) to form a device union ± or a fabric. You are allowed to: The Enhanced Intelligent Resilient Framework (IRF) feature, where the IRF-supported switches that are of the same type (called units) are connected to form a device union ± or a fabric. Trough a fabric, you can (1) manage multiple devices but with one connection and one IP address, thus decreasing the overheads; (2) expand the network by adding devices as desired, thus protecting the existing investment; and (3) have high reliability of N + 1 redundancy, thus avoiding single point failures which can result in service interruption. Support DDM (Distributed Device Management) Support DDR (Distributed Resilient Routing) Support DLA(Distributed Link Aggregation) through LACP and across devices 44

49 H U A W E I T E C H N O L O G I E S S5000 Series Gigabit Intelligent Switch Introduction Quidway S5000 Series Ethernet Switches are Layer 2 wire speed Gigabit Ethernet (GE) switching products and designed specially for high-speed interconnection between enterprise networks and providing gigabit bandwidth to desktop PCs (Personal Computers) and workstations. For Wide Area Network (WAN) application, S5000 Series provide multi-channel Gigabit Ethernet optical interfaces, which support WAN convergence and can address the problem of scarce GE ports on high-end devices. Besides, S5000 Series also provide redundant backup protection of power supply on devices. Quidway S5012G Quidway S5012T Quidway S5024G 45

50 Product Features Abundant Interfaces Types:Flexible Network Connectivity, with simple adaptation to network changes; High Density:Up to 12/24 GE ports, saving on space and power; Link Aggregation:Support link aggregation to meet increased traffic needs without the need to purchase new equipment saving on CAPEX costs, Maintains service quality; Packet Storm Suppression:All ports support unicast, multicast, and broadcast storm suppression based on bandwidth ratio, easy to control the storm, preventing disruption of network; Multiple Management Tools:Local and remote control like: CLI, Telnet, SNMP, RMON, WEB network management, system log, and hierarchical alarms, Easy to manage, maintain and use reducing OAM cost overheads; Extensive QOS functions:provides ACL function of layer2 to layer7 policy to filter traffic satisfying specified rules. Flexibly configure policies according to such information as source IP address, destination IP address, source port number, destination port number, inbound/outbound physical port and protocol type; Supports traffic-based bandwidth control, with a granularity of 1Mbit/s; Supports 802.1p priority and DSCP (Differentiated Services Code Point) priority; Each port includes 8 priority queues; Supports SP (Strict Priority) and WFQ (Weighted Fair Queuing). Guarantee s for SLA s, provides increased customer/user satisfaction, enables differentiation of service and ensures that delay sensitive traffic is prioritized; High Security Features:Hierarchical user management and password protection 802.1X authentication and packet filtering, Prevents unauthorized accessing the network, keeping customer information safe. Specifications Software Specifications Wire speed switching All the ports support wire speed forwarding Switching capacity is 24Gbps (S5012G and S5012T) or 48Gbps (S5024G) Packet forward speed is 17.8Mpps (S5012G and S5012T) or 35.6Mpps (S5024G) Switching mode Store and forwarding VLAN Supports up to 4K VLANs (Virtual Local Area Networks) based on IEEE 802.1Q Supports port-based VLAN Supports GVRP (GARP VLAN Registration Protocol) Multicast Supports GMRP (GARP Multicast Registration Protocol) Supports IGMP Snooping (Internet Group Management Protocol Snooping) STP/RSTP /MSTP Supports STP/RSTP/MSTP and observe standards including IEEE 802.1D, IEEE 802.1w and IEEE 802.1s Port Aggregation Supports up to 6 (S5012G and S5012T) or 12 (S5024G) port aggregation groups, with each aggregation group supporting 8 ports at most 46

51 H U A W E I T E C H N O L O G I E S Broadcast storm suppression Mirroring MAC address table Flow control Load and upgrade Management Maintenance QoS (Quality of Service)/ACL (Access Control List) Security feature All the ports support broadcast storm suppression based on bandwidth ratio Supports port mirroring Address learning Supports IEEE 802.1D Supports 16k MAC addresses at most Supports IEEE 802.3x flow control (full duplex) Supports back-pressure based flow control (half duplex) Supports X-Modem protocol to implement load and upgrade Supports load and upgrade of FTP (File Transfer Protocol) and TFTP (Trivial File Transfer Protocol) Supports the Command Line Interface (CLI) configuration Supports remote configuration through Telnet Supports configuration via the Console port Supports SNMP (Simple Network Management Protocol) Supports RMON (Remote Monitoring) Supports Huawei Quidview NM system and WEB network management Supports system log Supports hierarchical alarm Supports HGMP (Huawei Group Management Protocol) v2 Supports remote dialing Supports debugging information output Supports PING (Packet Internet Groper) and Tracert Supports remote maintenance through Telnet Supports HGMP v2 Provides ACL function of layer2 to layer7 policy to filter traffic satisfying specified rules. The user can flexibly configure policies according to such information as source IP address, destination IP address, source port number, destination port number, inbound/outbound physical port and protocol type Supports traffic-based bandwidth control, with a granularity of 1Mbit/s Supports 802.1p priority and DSCP (Differentiated Services Code Point) priority Each port includes 8 priority queues Supports PQ (Priority Queuing) and WRR (Weighted Round Robin) Hierarchical management over the users and password protection Supports 802.1X authentication Supports RADIUS (Remote Authentication Dial-In User Service) 47

52 Hardware Specifications Description S5012G S5012T S5024G Fixed ports 12 10/100/1000Mbps 2 10/100/1000Mbps 20 10/100/1000Mbps Ethernet ports Ethernet ports Ethernet ports 4 GE Combo GBIC 2 Combo RJ45 ports 4 GE GBIC ports ports 10 GE GBIC ports Switching capacity 24Gbps 24Gbps 48Gbps Forwarding capability 17.8Mpps 17.8Mpps 35.6Mpps Dimensions (W X H X D) 436mmX 44mmX 240mm Input voltage AC: 100V to 240V; DC: -48 to -60V ; RPS Power 60W 60W 60W Max attitude 4000m Operating Temperature 0 C to 45 C Humidity 10% - 90%, non-condensing Modules S5012G:12 10/100/1000BASE-T auto-negotiation Ethernet ports (RJ-45 connector) and 4 Combo GBIC (Gigabit Interface Converter) ports. S5012T: 10 GBIC ports, 2 10/100/1000BASE-T Ethernet ports and 2 Combo RJ45 ports. S5024G: 20 10/100/1000BASE-T Ethernet ports (RJ-45 connector) and 4 GBIC ports. GBIC Module includes: GBIC multi mode optical module (850nm, 550m, SC) ; GBIC single mode optical module (1310nm, 10km, SC) ; GBIC single mode optical module (1310nm, 30km, SC) ; GBIC single mode optical module (1550nm, 40km, SC) ; GBIC single mode optical module (1550nm, 70km, SC) ; GBIC single mode optical module (1550nm, 100km, SC); GBIC single mode optical module (ZX70); GBIC single mode optical module (STACK-HSSDC). Applications S5000 series support the following services: Internet broadband access; High-speed enterprise network internetworking; Multimedia application, big file transmission, broadband community application. 48

53 H U A W E I T E C H N O L O G I E S Quidway S5516 Gigabit Routing Switch Introduction Quidway S5516 Ethernet Switch is a cost effective layer2/3 Gigabit Routing Switch, featured with modular design, wirespeed performance and policy based QoS for bandwidth and traffic management. The S5516 comes with layer 2 and layer 3 wire speed switching using static routing, RIP or OSPF routing protocols. It can serve as the core device in small to medium enterprise networks or be located at the distribution layer metropolitan area networks. Quidway S5516 Front View 49

54 Product Features State-of-the-art non-blocking switch fabric:cost effective, high performance throughput providing constant information flows; Flexible Module Configuration:Flexible Network Connectivity over wide distances provides extensive networking options; Link Aggregation:Up to 6 groups of FE port aggregation and each group can contain up to eight FE ports, Supports the aggregation of up to two GE ports. Meets increased traffic needs without the need to purchase new equipment saving on CAPEX costs. Packet Strom Suppression:All ports support unicast, multicast and broadcast storm suppression based on bandwidth ratio. Easy to control the storm, preventing disruption of network; Multiple Management Tools:Local and remote control like: CLI, Telnet, SNMP, RMON, Huawei Quidview NMS WEB network management, system log, and hierarchical alarms; Easy to manage, maintain and use reducing OAM cost overheads; Multiple Routing Options:Support RIP V1/V2, OSPF V2, BGP V4 and Policy Routing Management; Strong Routing capability for large scale internetworking; Multiple Multicast Protocols:GARP Multicast Registration Protocol (GMRP), IGMP Snooping, PIM-DM, PIM-SM, Deliver L3 Multicast Services; High Security Features:Including Hierarchical user management and password protection, 802.1x authentication and packet filtering, MD5 and plain text encryption; Prevents unauthorized accessing the network, keeping customer information safe; Extensive Bandwidth Management and QoS:Based on port, MAC address, IP address, TCP/UDP port No, and ToS/Diffserv value (granularity of traffic control 64kbps), Priority Control (based on VLAN port, 802.1p, ToS/Diffserv, and COS settings according to traffic classification) 8 sending queues on each port, Queue scheduling: Supports Strict Priority (SP) and Weighted Round Robin (WRR); Guarantee s for SLA s, provides increased customer/user satisfaction, enables differentiation of service and ensures that delay sensitive traffic is prioritized. 50

55 H U A W E I T E C H N O L O G I E S Specifications Software Specifications Wire speed layer 2/3 switching Switching mode Flow control VLAN Multicast Spanning tree Link Aggregation MAC address table Broadcast Storm Suppression IP address table IP routing DHCP Relay Security Features QoS All ports support wire speed forwarding 32Gbps switching capacity Packet forwarding rate 24Mpps Store and Forward IEEE 802.3x flow control (full duplex) Back-pressure based flow control (half duplex) Supports up to 4K VLANs, in compliance with IEEE 802.1Q standard Supports port-based VLAN Supports VLAN Trunk Supports Multi port Supports GARP VLAN Registration Protocol (GVRP) GARP Multicast Registration Protocol (GMRP) Internet Group Management Protocol Snooping (IGMP Snooping) Internet Group Management Protocol (IGMP) Protocol Independent Multicast-Dense Mode (PIM-DM) Protocol Independent Multicast-Sparse Mode (PIM-SM) Spanning tree protocol and rapid spanning tree protocol, in compliance with IEEE 802.1D and IEEE 802.1w standards Supports up to 16 link aggregations Supports the aggregation of up to 16 ports Address self-learning: compliant with the IEEE 802.1D standard Address table size: Supports up to 16K MAC addresses Bandwidth-percentage-based broadcast storm suppression on VLAN Up to 32K IP address forwarding table entries Static routing Routing Information Protocol (RIP) Open Shortest Path First (OSPF) Border Gateway Protocol-4 (BGP-4) Supports DHCP Relay (Dynamic Host Configuration Protocol Relay) Packet filtering of layers 2, 3, and 4 (filter based on port, source/destination MAC address, source/destination IP address and illegal frame) User level management and password protection Supports 802.1X authentication Bandwidth management (based on port, MAC address, IP address, TCP/UDP port No, and ToS/Diffserv value), the granularity of traffic control is 64kbps Priority control (based on VLAN port, 802.1p, ToS/Diffserv, and COS settings according to traffic classification) There are eight sending queues on each port 51

56 Centralized Management Features Reliability Software loading and Upgrading Management Maintenance Queue scheduling: Supports Strict Priority (SP) and Weighted Round Robin (WRR) Supports traffic classification Supports stack Huawei Group Management Protocol (HGMP) Virtual Router Redundancy Protocol (VRRP) Supports loading and upgrade through Xmodem protocol Supports loading and upgrading through FTP and TFTP Supports Command line configuration (CLI) Supports Telnet remote configuration Supports Console port configuration Supports remote dialing Supports SNMP management (Supporting Huawei imanager QuidView NMS and groups 1, 2, 3, and 9 of RMON MIB) Supports system log Supports alarm with different severities Supports debugging information output Supports PING and Tracert Supports remote maintenance through Modem dialing and Telnet Hardware Specifications Description S5516 Service Module Slots 4 slots Switching Capacity 32Gbps Forwarding Capacity 24Mpps Dimension(W X H X D) 436mm X 86mm X 400 mm Input voltage AC: 100 to 240V DC: -48V to -60V Power 120W Max attitude 4000m Operating Temperature 0 C to 45 C Humidity 10% - 90%, non-condensing 52

57 H U A W E I T E C H N O L O G I E S Modules S5516: 4 expandable slots, each slot supports: 4-ports 1000M Base-SX(500m) interface module; 4-ports 1000M Base-LX(10km) interface module; 4-ports 10/100/1000M Base-T interface module ; 4-ports 1000M SFP optical interface module; 4-ports stack module. SFP Module includes: SFP multi mode optical module (850nm, 550m, LC) ; SFP single mode optical module (1310nm, 10km, LC); SFP single mode optical module (1310nm, 30km, LC); SFP single mode optical module (1550nm, 40km, LC); SFP single mode optical module (1550nm, 70km, LC); SFP single mode optical module (1550nm, 100km, LC). 53

58 Applications Networking of Broadband Ethernet Access in MAN In the networking diagram of broadband MAN, S5516 Ethernet Switch is used as the convergence layer equipment of the broadband MAN. It is connected to the backbone router or layer 3 switch via GE optical port and connected to the egress layer 2/3 equipment of the residential area egress via GE optical port. Besides, the bandwidths of upstream and downstream can be increased via multiple GE aggregations. Broadband MAN networking with S

59 H U A W E I T E C H N O L O G I E S Networking of Medium and Small Enterprise/Large Enterprise Branch In the medium and small enterprise or large enterprise s branches, as backbone layer equipment, S5516 Ethernet switch has the following connection modes with adjacent equipment: GE optical port/electrical port connecting the workgroup L2/ L3 Ethernet switch (3026/3526) in the downstream; GE optical port (long haul/short haul) connecting other building/floor; GE/100M electrical port directly connecting the server, or GE/100M electrical port connecting server group via workgroup L2/L3 Ethernet switch; 10/100M electrical port connecting the router. Medium-/small-sized enterprises and the branches of the large-scale enterprise networking with S

60 Networking of Large-scale Enterprise and Campus Network S5516 Ethernet Switch can serve as the convergence layer device of the large-scale enterprise network and campus network. It is connected to the backbone router or layer 3 switch via GE optical interface or electrical interface, and connected to layer 2/3 device of the convergence workgroup via GE optical interface or electrical interface. Large-scale enterprise and campus networking with S

61 H U A W E I T E C H N O L O G I E S Quidway S6500 Series Gigabit Routing Switches Introduction Quidway S6500 Series Ethernet Switches are modularized L2/L3 wire-speed Ethernet Switches with medium to large capacity. The switches come in three models, S6503 with 3 service slots, S6506 with 6 service slots, and S6506R with 6 service slots and redundant controllers. Running on Huawei s Versatile Routing Platform (VRP) network Operating System (OS), the Quidway S6500 Ethernet Switch provides rich dynamic routing protocols, Virtual Local Area Network (VLAN) control, and Quality of Service (QoS) assurance mechanisms. The switch has powerful service control and user management capabilities and provides flexible networking solutions suitable for medium to large enterprise networks, IP Metropolitan Area Network (MAN) and Campus areas. Quidway S6506 Front View 57

62 Quidway S6503 Front View Quidway S6506R Front View 58

63 H U A W E I T E C H N O L O G I E S Product Features High capacity and density:switching Capacity from 48Gbps to 768Gbps in different Engine;Salience TM III provides maximum 768Gbps switching capacity and up to 288 GE interfaces;flexible Network Connectivity to meet diverse network requirements. High scalability saves on space and power costs and reduces CAPEX; Perfect DiffServ/QoS:Support traffic classifications; Support Traffic Policing (CAR at 64Kbps); Different L2/L3/L4 Packet Services Types; Support WRR, RED, Congestion Avoidance, Output Traffic Shaping and Bandwidth Management; Guarantee s for SLA s, provides increased customer/user satisfaction, enables differentiation of service and ensures that delay sensitive traffic is prioritized; Link Aggregation:Up to 6 groups of FE port aggregation and each group can contain up to eight FE ports; Supports aggregation of up to two GE ports; Meets increased traffic needs without the need to purchase new equipment saving on CAPEX costs.; Packet Strom Suppression:All ports support unicast, multicast, and broadcast storm suppression based on bandwidth ratio; Easy to control the storm, preventing disruption of network; Multiple Management Tools:Local and remote control like: CLI, Telnet, SNMP, RMON, Huawei Quidview NMS WEB network management, system log, and hierarchical alarms; Easy to manage, maintain and use reducing OAM cost overheads; Multiple Routing Options:Support RIP V1/V2, OSPF V2, BGP V4 and Policy Routing Management; Strong Routing capability for large scale internetwork; High Security Features:Including Hierarchical user management and password protection, 802.1x authentication and packet filtering, MD5 and plain text encryption; Prevents unauthorized accessing the network, keeping customer information safe; High Reliability:Support Redundant Backup STP/RSTP/MSTP and VRRP; Provides high resiliency and network redundancy required for business critical applications. 59

64 Specifications Software Specifications Wire speed switching Switching mode MAC address table STP/RSTP/MSTP Flow control Link Aggregation VLAN Packet storm suppression Network protocol IP routing Multicast AAA and security Reliability All LPU ports support wire speed forwarding (forwarding delay less than 10 s) Store and Forward mode Address self-learning Complies with IEEE 802.1D standard and supporting port locking S6503:Maximum 16K MAC S6506/6506R:Maximum 32K MAC addresses addresses Supports STP/RSTPMSTP, complied with IEEE 802.1D/802.1w/802.1s Standard Supports IEEE 802.3x flow control (full duplex) Supports Back-pressure Based Flow Control (half-duplex) Supports the wire speed aggregation group Supports link aggregation from switch to switch and from switch to server Supports port-based VLAN QINQ Supports GARP VLAN Registration Protocol (GVRP) Supports port-based VLAN Trunk Supports packet storm suppression on VLAN Address Resolution Protocol (ARP) Dynamic Host Configuration Protocol (DHCP) Relay Static routing Routing Information Protocol (RIP) V1/V2 Open Shortest Path First (OSPF) V2 Border Gateway Protocol (BGP) V4 S6503: 32K IP S6506/S6506R: 64K IP addresses forwarding table entries addresses forwarding table entries GARP Multicast Registration Protocol (GMRP) Internet Group Management Protocol (IGMP) Snooping Protocol Independent Multicast-Dense Mode (PIM-DM) Protocol Independent Multicast-Sparse Mode (PIM-SM) Supports the supplicant authentication compliant with IEEE 802.1x protocol Supports local authentication and RADIUS authentication User level management and password protection Supports Access Control List (ACL), Layer 2, 3, and 4 information filter (such as frame filter based on port and source/destination MAC addresses, and packet filter based on source/destination IP addresses and upper layer protocol type) Supports plain text authentication and MD5 encrypted authentication of OSPF, RIP V2 and BGP V4 packets Supports Simple Network Management Protocol (SNMP) Supports Virtual Router Redundancy Protocol (VRRP) 60

65 H U A W E I T E C H N O L O G I E S QoS Load and update system software System configuration/system management System maintenance Supports traffic classification Supports bandwidth management based on port, MAC address, IP address,tcp/ UDP port number, Type of Service(ToS)/Diffserv value and Committed Access Rate (CAR). The bandwidth management granularity is 64kbps Supports the priority based on VLAN port, IEEE 802.1P and ToS/Diffserv. Support traffic classification to set Class of Service (CoS) 8 sending queues for each port Supports the queue dispatching algorithm First In First Out (FIFO), Strict Priority (SP), and Weighted Round Robin (WRR) Supports to load and update software via Xmodem protocol Supports to load and update software via File Transfer Protocol (FTP) and Trivial File Transfer Protocol (TFTP) Supports Command Line Interface (CLI) view Supports the configuration via Console port Supports the local/remote configuration via Telnet Supports the remote configuration through dial-up via Modem Supports Huawei imanager QuidView based on SNMP Version 3 Supports the Group 1, 2, 3 and 9 MIB of RMON (Remote Monitoring) Supports Huawei Group Management Protocol (HGMP) V2 Supports system log Supports user level alarm Supports filter, output and account of alarm/debugging information Supports Ping and Tracert Supports remote maintenance through Modem dial-up and Telnet login Hardware Specifications Description S6503 S6506 S650R Service Module Slots 3 slots 6 slots 6 slots Main Control Module Slots 1 slot 1 slot 2 slots Switching Capacity isalience I : 32Gbps Salience I : 64Gbps Salience II : 64Gbps Salience III 48Gbps Salience III 48Gbps Salience III 48Gbps Salience III 96Gbps Salience III 96Gbps Salience III 96Gbps Salience III 384Gbps Salience III 384Gbps Salience III 384Gbps Salience III 768Gbps Salience III 768Gbps Salience III 768Gbps Forwarding Capacity isalience I :24Mpps Salience I : 48Mpps Salience II :48Mpps Salience III 48G:36 Mpps Salience III 48G:36 Mpps Salience III 48G : 36Mpps Salience III 96G:42 Mpps Salience III 96G:72 Mpps Salience III 96G:72 Mpps Salience III 384G : 90Mpps Salience III 384G : 126Mpps Salience III 384G : 126Mpps (can be upgraded to 198Mpps) 61

66 Salience III 768G :216Mpps Salience III 768G :216Mpps Salience III 768G :216Mpps (can be upgraded to 432Mpps) Dimension(W X H X D) 436mm X 352.8mm X 480mm 436mm X 486.2mm X 480mm 436mm X 530.6mm X 480 mm Input voltage AC: 100 to 240V DC: -48V to -60V Power 350W 650W 800W Max attitude 4000m Operating Temperature 0 C to 45 C Humidity 10% - 90%, non-condensing Modules S6503 supports 3 service slots, S6506 and S6506R support 6 service slots, each slot supports following module: 48-port 10BASE-T/100BASE-TX auto-sensing interface module; 24-port 100BASE-FX MMF/SMF FE interface module; 4-port 1000 GBIC interface module (S6503 only); 4-port 10/100/1000BASE-T interface module (S6503 only); 8-port 1000 GBIC interface module; 8-port 10/100/1000BASE-T interface module; 20-port 10/100/1000BASE-T interface module; 20-port 1000 SFP interface module; 48-port 10/100/1000BASE-T interface module; 1-port 10GBASE XENPAK interface module. GBIC Module includes : GBIC multi mode optical module (850nm, 550m, SC) ; GBIC single mode optical module (1310nm, 10km, SC) ; GBIC single mode optical module (1310nm, 30km, SC) ; GBIC single mode optical module (1550nm, 40km,SC) ; GBIC single mode optical module (1550nm, 70km, SC) ; GBIC single mode optical module (1550nm, 100km, SC). SFP Module includes: SFP multi mode optical module (850nm, 550m, LC) ; SFP single mode optical module (1310nm, 10km, LC); SFP single mode optical module (1310nm, 30km, LC); SFP single mode optical module (1550nm, 40km, LC); SFP single mode optical module (1550nm, 70km, LC); SFP single mode optical module (1550nm, 100km, LC). 62

67 H U A W E I T E C H N O L O G I E S Applications S6500 Series Applied in MAN S6500 Ethernet Switch is located on convergence layer in MAN. Its uplink is connected to Layer 3 backbone switch (such as Quidway S8016) or GSR through GE link with long haul/very-long haul dark fibers. Multiple GE Trunk can be used to enlarge uplink broadband. Its downlink is connected to Layer 2/3 Ethernet switching devices (like Quidway S2000/3000/ S3500 series Ethernet Switches) at residential area exit through GE also with long distance/very-long distance dark fibers. Multiple GE Trunk can also be used to enlarge downlink broadband. S6500 Series applied in MAN 63

68 S6500 Series Applied in Medium-/Small-scale Enterprise Network In medium and small-scale enterprise network, S6500 Series Ethernet Switches generally serves as the backbone level equipment. It can be connected to the adjacent equipment in the following ways: It can be connected to L2/3 Switches (like Quidway S3000/S3500 Series) in the workgroup via GE/FE optical port or electrical interface on downlink or directly to user s workstation, to other floors/buildings via GE optical port (at long/short distance) or even GE Trunk, to server cluster via GE/FE electrical interfaces and to routers via 10/100Mbps electrical interfaces. S6500 Series applied in medium-/small-scale enterprise network S6500 Series Applied in Large Campus Network S6500 Series Ethernet Switch can serve as the convergence layer or backbone level equipment of the large-scale enterprise network and campus network. In this case, it is generally located in distribution room or central equipment room. It is connected to workgroup level or Layer 2/3 switches (like Quidway S3000/S3500) via GE/FE optical interface or electrical interface, and connected to backbone switches or routers on uplink via GE optical interface or electrical interface. S6500 Series applied in large campus network 64

69 H U A W E I T E C H N O L O G I E S Quidway S8016 Multi-service Backbone Routing Ethernet Switch Introduction Quidway S8016 backbone routing switch is a large capacity multi-service core switch that is applied in the carrier-class network, broadband MAN and enterprise network. adopting large-capacity platform, the S8016 provides excellent Diff- Serv/QoS guarantee's as well as service flow control mechanisms, integrates such service functionalities as hardware NAT (Network Address Translation), DHCP (Dynamic Host Configuration Protocol), MPLS (Multi-Protocol Label Switching), layer2/ layer3 MPLS VPN, multicast and content switching. With carrier-class reliability, high density,large-capacity and multi-layer security the S8016 is the footstone for IP MAN/Metro Ethernet backbone convergence and enterprise network backbone construction, providing multiple network solutions. Quidway S8016 Product Features Multiple Services: Support VLAN aggregation, 802.1q VLAN trunk, QinQ, link aggregation, port mirror, 802.1p priority, STP/RSTP; Support MPLS and MPLS VPN, and support MPLS fast-route; Support Metro Ethernet by MPLS VPLS and provide Ethernet expand, Internet Access and L2VPN; Support multicast protocols such as IGMP, PIM-SM, PIM-DM, MSDP and MBGP; Support content and application aware Layers 2-7 switching services by integrated web-switch module and provide wire-speed content switch; Support NAT and MPLS NAT based on hardware; Support DHCP Relay and DHCP Server; Support IPv6, and support IPv4 and IPv6 dual stack, transition mechanism, manual configuration tunnel, autoconfiguration tunnel, 6to4 tunnel, NAT-NP; Support IPv6 static route, BGP4/BGP4+, RIPng, OSPFv3, ISISv6, ICMPv6, MIB, UDP6 MIB, TCP6 MIB and IPv6 MIB; Support V-switch; 65

70 Carrier-class reliability: Adapt distributed forwarding engine, and no single point of failure; Support a passive backplane and fully hot-swappable interface modules with localized forwarding and routing information; Provides full redundant system, include redundant CPU modules with sub-second route computation recovery failover, switching fabric, NAT card, power supply and fans etc; VRRP supports Layer 3 redundancy while STP and RSTP support Layer 2 redundancy networks, and link aggregation supports link redundancy; Support hot patch and online upgrading online. High reliability maintains Business Continuity in the event of system failures; High performance: Based on NP, provides wire speed forwarding performance for all kinds of packets withnonblocking and distributed forwarding architecture; Support up to 64,000 MAC addresses per card, 256,000 IP routes and 128,000 LSPs stored in hardware for superior performance, capacity and scalability; Supports wire speed content switching for server load balance. Hardware-based performance even with multiple services enabled, improves business processing, increases revenue generation and reduces time to market through efficient service provisioning; Perfect Diff-Serv/QoS: Support multiple traffic classification rules based on the source port, source VLAN ID, source MAC address, packet type, TCP/UDP port number, IP packet address prefix, application identification, content identification, etc; Provides functions of flow mapping and classification, traffic policing (TP), congestion control methods (RED, WRED and SA-RED), queuing and output traffic shaping when multiple rules are combined; Distinguish various services, and can ensure that bandwidth; delay and jitter are restricted within the required ranges; Enables the operators to provide their users with differentiated QoS and makes the IP MAN to become an integrated network that carries data, voice and video services concurrently; Support MPLS QoS, and mapping between EXP and TOS or COS. Changes ordinary network into a multi-service converged network providing guaranteed SLA's, increasing customer/user satisfaction, and enabling differentiation of service; Security Guarantee: Adopt distributed forwarding architecture different from Cache type, can effectively prevent CPU from virus; Distributed forwarding architecture ensure interface cards working solely; Configuration security: the login users have to undergo authentication, and users of different levels have different configuration authorities. There are two modes of user authentication available: local authentication and RADIUS authentication; The range of IP address of Telnet login users is restricted, and the password is required; Protocol message authentication: plain-text message authentication of OSPF, RIP2 and BGP4, and cipher-text authentication of MD5 are supported; Based on user-defined policies, the S8016 supports 80,000 hardware wire-speed ACLs packet filtering. Security filtering aims to redirect the filtered packet to a certain port. It helps packet capture for analysis by using devices; Invasion proof: realizes MD5 encryption for protocol packets and user authority and provides packet filtering mechanism that can perform firewall function; Data protection mechanism: regularly checks configuration information, and provides data standby mechanism of active/standby devices, timely automatic backup and manual backup of program data and configuration data, and power-failure protection of program data and configuration data; Support several kinds of protecting of DOS attack to protect against malicious users by limiting TCP SYN and ICMP traffic and protects against broadcast storms by limiting broadcast traffic etc; Support several kinds of binding with IP address, MAC address and port; Support the function of broadcast limiting; Support content switch module to protect the server inside IDC; Multiple Content Switching Functions: Including Layer4 to layer7 load balancing, Web cache redirection, 66

71 H U A W E I T E C H N O L O G I E S Makes contents accessed by the user directly obtained from the access point rather than via the backbone network, improvingresponse times and reduces bandwidth cost of the backbone network accordingly. Improves Scalability; Flexible Upgrading For Service: Advanced chipset NP (Network Processor), which is designed for next generation IP network, as forwarding engine, provides high scalability and abundant service offerings. High scalability reduces CAPEX costs, saves on power and space and protects users investments in the network; Distributed H/W-based wire-speed NAT features: One NAT board supports 150k session at the same time, increase 16K session /second, Policy supports public/private address mix programming, According to NAT capacity NAT board number flexible deploy, supports payload share and hot backup. This feature can save on IP addresses which is usually insufficient in MAN, and simplifies configuration and maintenance saving on OAM costs; Innovative HoPE solution supported: HoPE is a Huawei patent innovation. The solution redefines the MPLS VPN e to hierarchy (layered). This solution significantly reduces the cost of deploying a MPLS VPN, especially at the edge of anetwork. Specifications Software Specifications Performance Support up to 64,000 MAC addresses per card, 256K IP routes and 128,000 LSPs stored in hardware for superior performance, capacity and scalability Supports wire speed content switching for server load balance STP/RSTP Flow control Supports STP/RSTP, complied with IEEE 802.1D/802.1w Standard Supports IEEE 802.3x flow control (full duplex) Supports Back-pressure Based Flow Control (half-duplex) Link Aggregation Supports the wire speed aggregation group Supports link aggregation from switch to switch and from switch to server VLAN Supports port-based VLAN QinQ Supports GARP VLAN Registration Protocol (GVRP) Supports port-based VLAN Trunk Packet storm suppression Network protocol Supports packet storm suppression on VLAN Address Resolution Protocol (ARP) Dynamic Host Configuration Protocol (DHCP) Relay IP routing MPLS VPN Static routing, RIP V1/V2, OSPF V2, IS-IS, BGP V4 Support MPLS L2VPN Support MPLS L2VPN VPLS Support MPLS L3VPN 67

72 Multicast GARP Multicast Registration Protocol (GMRP) Internet Group Management Protocol (IGMP) Protocol Independent Multicast-Dense Mode (PIM-DM) Protocol Independent Multicast-Sparse Mode (PIM-SM) Security Adopt distributed forwarding architecture different from Cache type, can effectively prevent CPU from virus Distributed forwarding architecture ensure interface cards working solely Configuration security: the login users have to undergo authentication, and users of different levels have different configuration authorities. There are two modes of user authentication available: local authentication and RADIUS authentication The range of IP address of Telnet login users is restricted, and the password is required Protocol message authentication: plain-text message authentication of OSPF, RIP2 and BGP4, and cipher-text authentication of MD5 are supported Based on user-defined policies, the S8016 supports 80,000 hardware wire-speed ACLs packet filtering. Security filtering aims to redirect the filtered packet to a certain port. It helps packet capture for analysis by using devices Invasion proof: realizes MD5 encryption for protocol packets and user authority and provides packet filtering mechanism that can perform firewall function Data protection mechanism: regularly checks configuration information, and provides data standby mechanism of active/standby devices, timely automatic backup and manual backup of program data and configuration data, and power-failure protection of program data and configuration data Support several kinds of protecting of DOS attack to protect against malicious users by limiting TCP SYN and ICMP traffic and protects against broadcast storms by limiting broadcast traffic etc. Support several kinds of binding with IP address, MAC address and port Support the function of broadcast limiting Support content switch module to protect the server inside IDC Reliability QoS Supports Virtual Router Redundancy Protocol (VRRP) Support multiple traffic classification rules based on the source port, source VLAN ID, source MAC address, packet type, TCP/UDP port number, IP packet address prefix, application identification, content identification, etc. Provides functions of flow mapping and classification, traffic policing (TP), conges tion control methods (RED, WRED and SA-RED), queuing and output traffic shaping when multiple rules are combined. 68

73 H U A W E I T E C H N O L O G I E S Distinguish various services, and can ensure that bandwidth; delay and jitter are restricted within the required ranges Enables the operators to provide their users with differentiated QoS and makes the IP MAN to become an integrated network that carries data, voice and video services concurrently Support MPLS QoS, and mapping between EXP and TOS or COS Load and update system software Supports to load and update software via X-modem protocol Supports to load and update software via File Transfer Protocol (FTP) and Trivial File Transfer Protocol (TFTP) System configuration/system management Supports Command Line Interface (CLI) view Supports the configuration via Console port Supports the local/remote configuration via Telnet Supports the remote configuration through dial-up via Modem Supports Huawei imanager QuidView based on SNMP Version 3 Supports the Group 1, 2, 3 and 9 MIB of RMON (Remote Monitoring) Supports Huawei Group Management Protocol (HGMP) V2 Supports system log Supports user level alarm System maintenance Supports filter, output and account of alarm/debugging information Supports Ping and Tracert Supports remote maintenance through Modem dial-up and Telnet login Hardware Specifications Description S8016 Service slots 16 slots Total slots 20 slots Backplane capacity 256Gbps Switching capacity 128Gbps Forwarding capability 96Mpps Dimensions (W X H X D) 482.6mm X 444.5mm X mm Chassis Dimensions(W X H X D) 600mm X 2200mm X 800mm Weight Max. weight during full configuration<400kg Power AC : 100V to 240V, 4250W DC : -42 to -58V, 3500W Max attitude 4000m Operating Temperature 0 C to 45 C Humidity 10% - 90%, non-condensing 69

74 Modules S8016 provides 16 service slots, each slot supports following module: 16/32 x 10/100Base-TX RJ45 interface module; 16 x 100Base-FX(SMF) 15km MTRJ optical interface module; 16 x 100Base-FX(MMF) 2km MTRJ optical interface module; 4 x 1000Base-Tx Ethernet interface module; 4 x 1000Base-SX(MMF) 500m MTRJ optical interface module; 12 x 1000Base-X SFP optical interface module; 4 x 1000Base-X GBIC optical interface module; 4 x 155M POS MMF 2km MTRJ optical interface module; 4 x 155M POS SMF 15km MTRJ optical interface module; 8 x 155M POS MMF 2km MTRJ optical interface module; 8 x 155M POS SMF 15km MTRJ optical interface module; 2 x 622M POS MMF 500m SC optical interface module; 2 x 622M POS SMF 15km SC optical interface module; 1 x 2.5G POS SMF 2km LC optical interface module; 1 x 2.5G POS SMF 15km LC optical interface module; 8 ports 155M STM-1 ATM MTRJ interface module; 2 ports 622M STM-4 ATM SFP interface module; 16-port 10/100Base-TX RJ-45 WebSwitch interface module; 4-Port 1000Base-T WebSwitch interface module; 4-Port 1000Base-FX GBIC WebSwitch board; NAT service module; 1 x OC48c RPR STM16c 15km interface module; 1 x OC48c RPR STM16c 40km interface module; 1x OC48c RPR STM1c 70km interface module. GBIC Module includes: GBIC multi mode optical module (850nm, 550m, SC); GBIC single mode optical module (1310nm, 10km, SC); GBIC single mode optical module (1310nm, 30km, SC); GBIC single mode optical module (1550nm, 40km,SC); GBIC single mode optical module (1550nm, 70km, SC); GBIC single mode optical module (1550nm, 100km, SC). SFP Module includes: SFP multi mode optical module (850nm, 550m, LC); SFP single mode optical module (1310nm, 10km, LC); SFP single mode optical module (1310nm, 30km, LC); SFP single mode optical module (1550nm, 40km, LC); SFP single mode optical module (1550nm, 70km, LC); SFP single mode optical module (1550nm, 100km, LC). 70

75 H U A W E I T E C H N O L O G I E S Applications Application in MAN Convergence Network S8016 applied in the MAN The following details the networking application. In accordance with the requirement of backbone layer for high reliability and high scalability, the core devices in the network consist of NE80 core routers and S8016 routing switches. The S8016 provides 16 slots for service use, and is configured with master/slave control units and switch units. Its redundant power-supply backup design helps to avoid networking breakdown due to some error. Access routing backup of high reliability is provided for important users. The core devices are interconnected via GE interface and POS interfaces. As for the Ethernet access network, the community services and subscribers must be classified to ensure the security. The MA5200 can be used as the egress device for the community; Ethernet switch S3526 and S2403 can be directly used as access devices. They are interconnected via FE and GE interfaces. For group users, FE access mode or FR/ DDN dedicated-line access mode are supported. The S8016 can network with BAS (MA5200G). BAS enables access control, authentication and accounting for users, therefore realizing flexible user management. The entire broadband MAN can provide services such as MPLS, VPN and multicast and realize such value-added services as remote multimedia teaching, multimedia conferencing, audio on demand, VOD, financial data transportation, high-efficiency file transportation, game and emulation. 71

76 Metro Ethernet S8016 applied in the metro Ethernet network The following details the networking application. According to the requirement of backbone layer for high reliability and high scalability, the core devices in the network consist of several S8016 routing switches. The S8016 provides 16 slots for service use, and is configured with master/ slave control units and switch units. Its redundant power-supply backup design helps to avoid networking breakdown due to some error. Access routing backup of high reliability is provided for important users. The core devices are interconnected via GE interface and POS interfaces. The S8016 can support point-to-point, point-to-multipoint and multipoint-to-multipoint services for Metro Ethernet Net work based on MPLS VLL MPLS VPLS and QinQ. 72

77 H U A W E I T E C H N O L O G I E S Application in the Enterprise Backbone Network S8016 applied in the enterprise backbone network The following details the networking application. Due to the demand of the enterprise backbone network for high reliability and scalability, the core devices of the network consist of S8016 routing switches, whose strong switching capability can ensure a high-speed LAN within the enterprise network. The network core exchanges data with edge devices without any blocking. The core devices are interconnected via GE interface. The Layer 3 characteristics and high-speed routing function of the S8016 can ensure secure and fast connection with backbone networks. By running GVRP, the S8016 can exchange VLAN configuration information on 802.1Q Trunk ports, dynamically create and manage VLAN, prune unnecessary broadcast packets as well as unicast packets with uncertain destinations and maintain VLAN interworking between neighboring switches. The S8016 realizes Web cache redirection, redirecting user's Web request to local Cache. At the same time, the S8016 implements load balancing of internal servers in the enterprise network such as mail server, Web server,accounting/ authentification server and VPN gateway. The S8016 routing switch provides sufficient security management function and QoS guarantee for backbone layer of enterprise network, and is able to flexibly control access right and bandwidth of internal users. The S8016 supports standard VLAN and multiple VLAN-based extended functions. Its Layer2 VLAN characteristic is applied to isolate data servers, so as to avoid inter-access between the servers. 73

78 Application in the Campus Core Network S8016 applied in the campus core network The following details the networking application. Multiple services and ports are uniformly convergent to the S8016, integrating data, video, voice, and combination of broadband and narrowband. The network can provide multiple authentication/accounting modes, with high performance-price ratio, operable and manageable. The S8016 internetworks with BAS (MA5200G) for BAS to provide user access control, authentification and accounting functions. For Ethernet access networks that needs authentification such as faculty dormitory network and students' dormitory network, division of community services and users is necessary and security should be ensured. In this case, MA5200 can serve as egress authentification device and VLAN+WEB authentification can be adopted. Such Ethernet switches as S3026 and S2403 can be adopted in teaching area to directly function as access devices, interconnecting with each other via FE/GE interfaces. The A8010, as a narrowband access device, realizes the dial-up and authentification of faculty and students dormitories. The MPLS L2VPN/L3VPN inside the campus network and spanning AS (Autonomous System) domains can be realized. The S8016 serves for campus server center via its content switching function. Through NAT policy, the S8016 supports mixed networking of public network addresses and private network addresses. The whole constructed campus network can provide high-speed Internet access service. The ideal support of the S8016 to Diffserv/QoS and multicast enables campus network to realize such value-added services as video conferencing, on-line teaching, on-line query and on-line test. The S2403 and S3026 at user side of the S8016 are managed via HGMP, which simplifies the management of MAN devices. 74

79 H U A W E I T E C H N O L O G I E S Application as the Large-capacity NAT Device Ipv4 limited IP address resource no longer agrees with the rapid development of the Internet. Limited IP address resource is becoming an important factor restricting the development of the Internet. Although IPv6 is an ideal solution, there is still a long way to go for the development and application of Ipv6 on account of various reasons. Currently, NAT technology is the only feasible solution to alleviate the problem of limited IP address resource. The application of the S8016 as the large-capacity NAT device is shown in the following Figure. S8016 applied as a large-capacity NAT device The following describes this networking application in detail. The S8016 is mainly deployed at the edge convergence layer of MAN. It supports mixed access of both private network users and public network users, and can solve the problem of tight IP address resource via NAT function, namely, the S8016 supports NAT function in mixed networking with both public network addresses and private network addresses. The user is assigned with a private network IP address in VLAN access mode, and then can access the public network after the private network address is translated into public network address by NAT card of the S8016. Distributed NAT solution is applied to enable user access through the private network address in an enterprise network. However, in mixed networking with both private network addresses and public addresses, centralized NAT networking solution should be applied in the overall large-capacity NAT transforming in the MAN egress. Large-capacity NAT. One NAT card supports concurrently 150k sessions, and the session establishing rate is 5k session/second. The S8016 supports static load sharing between NATs, and mutual backup of NAT in case of fault. 75

80 Application in the IDC Network The S8016 can be used as the core or edge device of the IDC (Internet Data Center), as shown in the following Figure. Application in the IDC network The following details this networking application. The application of the S8016 can ensure a high-speed LAN in the IDC to implement non-blocking data exchange between the core and the edge in the network. In the S8016 internetworks with BAS (MA5200G),BAS provides user access control, authentification and accounting functions. The data servers are isolated with the S8016's Layer 2 VLAN features so as to avoid the inter-access between servers. The content switching function enables the S8016 to provide layer4 load balancing, layer5 to layer7 load balancing and Web cache redirection for the Web server and FTP server in data center, so as to avoid congestion occurring during large traffic data access and provide more reliable service for the Internet. The S3026 switches can be used on the access layer to connect all real servers (including servers of daemon service management). 76

81 H U A W E I T E C H N O L O G I E S Quidway S8500 Series Introduction Quidway S8500 series switches are new-generation high-performance 10G core routing switches. The switches are designed to serve as the core layer devices used in backbone networks, enterprise networks, campus networks, e-government networks, and education MANs, etc., as well as the convergence/core layer devices for carriers' IP MANs, featuring large switching capacity, high port-density, L2/L3 wire speed forward, easy manageability, comprehensive security mechanism, carrier-class reliability, QoS guarantee, abundant service support, and low cost. Quidway S8505 Quidway S8512 Quidway S

82 Product Features Advanced system structure: Distributed structure is adopted for the S8500 series switch, powerful ASIC chips are used for high-speed routing, and the Crossbar technologies are adopted for high-speed packet switching, all of which greatly improve the forwarding performance and scalability of the routing switch. Integrated with the main control module without taking up extra slots, the Crossbars provide a switching capacity up to 720G and can be set to work in the active/ standby or load-sharing mode via software configuration. The interface module is connected to the Crossbars on the two main control modules via two 150G buses, thus realizing the hot backup of dual main controls and dual switching networks in the real sense and greatly improving the system reliability. Large capacity, high-density wire-speed switching: Quidway S8500 series provides 1.8T backplane bandwidth, 720Gbps switching capacity, and 432Mpps forwarding capacity. By appropriate combination of interface modules with different port-densities and port-attributes, flexible port configuration can be easily obtained with guaranteed wire speed operation. For maximum protection of customer investment, as well as ease of hardware platform upgrade, plenty of bus interfaces are reserved on the backplane, enabling the system switching capacity to smoothly transition to terabit-level. Support of new-generation 10G interfaces The new-generation 10G Ethernet interface provides richer bandwidths and powerful processing capabilities while preserving the compatibility and simple usage of Ethernet for easy upgrade. Meanwhile, the 10G Ethernet provides pertinent solutions for MAN and WAN applications to simplify the network architecture and reduce the network construction costs. The new-generation 10G Ethernet provided by the S8500 series switch overcomes a number of limitations of the earlier 10G Ethernet, provides powerful QoS guarantee based on wire-speed forwarding, and supports rich features such as ACL, Policy Based Routing (PBR), and security. It can support wire-speed MPLS forwarding, provide better IP VPN services and transparent LAN services. In addition to standard LAN interfaces, the S8500 series switch provides POS and 10GBASE WAN interfaces that can be connected to the exist SDH/SONET networks seamlessly. MPLS/IPv6 distributed wire-speed support The S8500 series switch complies with the design concept that attaches importance to both services and performance. On the one hand, the bandwidth and network scale increase push the performance improvement and capacity increase of core routing switch. On the other hand, the service development requires the core switch be more intelligent and have more powerful service provision capabilities. The S8500 series switch adopts the powerful ASIC chip to realize the MPLS distributed wire-speed forwarding and IPv6 ready. It also realizes high-performance services like wire-speed NAT and Web-switch. While providing comprehensive services for users, it tailors services flexibly as actually required. The S8500 series switch provides MPLS VPN services, including L2/L3 MPLS VPN and VPLS (Virtual Private LAN Service). 78

83 H U A W E I T E C H N O L O G I E S Carrier-class reliability design Distributed structure is adopted for the S8500 series switch to support dual main control and switch fabric modules. The switch supports passive backplane design and all the modules support hot-swapping. The 1+1 redundant load-sharing mechanism is adopted for the power supply system and dual power inputs are supported. The switch supports the STP/ RSTP/MSTP and VRRP protocols and can meet strict requirements for carrier-class network reliability (up to %). Complete security mechanism S8500 series switch supports plain text password or cryptographic MD5 authentication of OSPF, RIP v2 and BGP v4 packets. It adopts the 802.1x mode for access user authentication, and supports secure SNMPv3 protocol, configuration security for user authentication. Users of different levels have different configuration rights and two user authentication modes are provided: local authentication and RADIUS authentication. The S8500 series switch also supports the standard Radius protocol, provides the TACACS+ function, and supports the HCBM TM (Huawei Constrained-based Multicast) function. Specifications Software Specifications Wire speed L2 switching Switching mode MAC address table STP/RSTP/MSTP Flow control Port aggregation VLAN Broadcast storm suppression Network protocol IP routing All ports of interface modules support wire speed forwarding Store and forward Address self-learning Supports binding MAC address table to the port S8512 and S8508: 64k; S8505: 32k Supports STP/RSTP/MSTP Supports IEEE 802.3x-compliant flow control (full-duplex) Supports back-pressure based flow control (half-duplex) Supports wire speed aggregated group Supports port aggregation between routing switches or from the routing switch to server Supports port-based VLAN, protocols-based VLAN, subnetworks-based VLAN QinQ Supports GARP VLAN Registration Protocol (GVRP) Supports port-based VLAN Trunk Supports port-based broadcast suppression TCP/IP stack Dynamic Host Configuration Protocol Relay Static Routing Routing Information Protocol (RIP) v1/v2 Open Shortest Path First (OSPF) v2 Border Gateway Protocol (BGP) v4 Integrated IS-IS Policy Based Routing (PBR) 79

84 Multicast Security MPLS VPN Reliability QoS System program loading and upgrading System configuration/system management System Maintenance Supports Equal Cost Multi-path Routing (ECMP) GARP Multicast Registration Protocol (GMRP) Internet Group Management Protocol (IGMP) Protocol Independent Multicast-Dense Mode (PIM-DM) Protocol Independent Multicast-Sparse Mode (PIM-SM) Multicast source discovery protocol (MSDP) Multiprotocol BGP (MBGP) IGMP snooping Hierarchical user management and password protection Supports Access Control List (ACL), Layer 2, 3, and 4 information filtering (such as frame filtering based on port and source/destination MAC addresses, and packet filtering based on source/destination IP addresses and upper layer protocol type). Supports plain text authentication and MD5 authentication of OSPF, RIP v2 and BGP v4 packets Supports cipher text authentication using Simple Network Management Protocol (SNMP) Support MPLS forwarding Support L2/L3 MPLS VPN and VPLS, can be deployed as provider (P) or provider edge (PE) Supports Virtual Router Redundancy Protocol (VRRP) Supports traffic classification based on port, MAC address, IP address, TCP/UDP port number, Type of Service (ToS)/Diffserv value, etc. Supports shaping and bandwidth management, and Committed Access Rate (CAR). The bandwidth granularity is 1kbps Supports priority based on VLAN port, IEEE 802.1P and ToS/Diffserv. Supports traffic classification by Class of Service (CoS) 8 transmit queues for each port Supports Strict Priority (SP), WRR scheduling Support TD, WRED congestion avoidance algorithm Supports program loading and upgrading using X-Modem protocol Supports program loading and upgrading using FTP and TFTP Supports both English and Chinese Supports CLI configuration mode Supports Console port configuration mode Supports local/remote configuration using Telnet Supports remote configuration through Modem Supports Huawei NMS based on SNMP v3 Supports MIB of RMON Supports system logging Supports alarm filtering Supports filtering, output and counting of alarm/debugging information Supports Ping and Tracert Supports remote maintenance through Modem and using Telnet 80

85 H U A W E I T E C H N O L O G I E S Hardware Specifications Description S8505 S8508 S8512 Interface module slots Total slots Backplane capacity 750Gbps 1.2Tbps 1.8Tbps Switching capacity 300Gbps 480Gbps 720Gbps Forwarding capability 180Mpps 288Mpps 432Mpps Dimensions (W X H X D) 436mm X 486mm X 450mm 436mm X 619mm X 450mm 436mm X 753mm X 450mm Weight <65Kg <80Kg <100Kg Input voltage AC: 100V to 240V; DC: -42 to -58V Power 1200W 2000W 2000W Max attitude 4000m Operating Temperature 0 C to 45 C Humidity 10% - 90%, non-condensing Modules S8505 supports 5 interface module slots, S8508 supports 8 interface module slots and S8512 supports 12 interface module slots, each slot supports following module: 48-port 10/100BASE-TX RJ45 interface module; 20-port 100BASE-FX SFP interface module; 12-port 10/100/1000BASE-TX RJ45 interface module; 12-port 1000BASE-X SFP interface module; 24-port 1000BASE-X SFP interface module; 24-port 10/100/1000BASE-TX RJ45 interface module; 1-port 10GBASE-R XENPAK interface module; 2-port 10GBASE-R/W XFP interface module; 4-port 10GBASE-R/W XFP interface module; 4-port OC-3c POS SFP interface + 8-port 1000BASE-X SFP interface module; 32-port 10/100BASE-TX interface + 4-port 1000BASE-X interface module; 4-port 1000BASE-X-SFP interfce module + 8-port 10/100/1000BASE-TX RJ45 interfce module; 48-port 10/100/1000BASE-TX RJ45 interface module; 48-port 10/100/1000BASE-TX RJ45 w/poe interface module; 4-port OC-48c POS SFP interface module; 1-port OC-192c POS XFP interface module; 2-port OC-48c RPR SFP interface module; 2-port OC-192c RPR XFP interface module. 81

86 GE SFP Module includes: SFP multi-mode optical module (850nm, 550m, LC) ; SFP single-mode optical module (1310nm, 10km, LC); SFP single-mode optical module (1310nm, 40km, LC); SFP single-mode optical module (1550nm, 40km, LC); SFP single-mode optical module (1550nm, 70km, LC); SFP single-mode optical module (1550nm, 100km, LC); XENPAK Module includes: XENPAK multi-mode optical module (850nm, 300m, SC) ; XENPAK single-mode optical module (1310nm, 10km, SC); XENPAK single-mode optical module (1310nm, 40km, SC); XFP Module includes: XFP multi-mode optical module (850nm, 300m, LC) ; XFP single-mode optical module (1310nm, 10km, LC); XFP single-mode optical module (1550nm, 40km, LC). 82