Done! Enjoy your new Smart Speaker for Android.

Transcription

1 SETUP SMART SPEAKER FOR ANDROID 1. PREPARATION 2. APP INSTALLATION 3. SETUP 4. LISTEN TO MUSIC Connect the Smart Speaker for Android via a network cable to your wireless router, and connect the power supply as well. A wired connection to the router is only necessary during setup. Turn the power switch to the on position and press the on/ off button on the front of the Smart Speaker. The Smart Speaker for Android is based on the proven Raumfeld by Teufel streaming technology. In order to control your Smart Speaker you will need the Raumfeld by Teufel App, available in the Google Play Store. Download the Raumfeld by Teufel App and install it on your Android smartphone or tablet. Direct link to the app in the Google Play Store Start the Raumfeld App. A setup wizard will guide you through the necessary steps. Make sure your smartphone is wirelessly connected to the same network as the Smart Speaker for Android. In order to connect your Smart Speaker with your wireless access point, select "Connect to Your Personal Network" in the setup wizard at the "Connect to Network" step. Simply select your wireless network and then enter the corresponding password. Follow the on-screen instructions to configure the device and to assign it a room name. After completion of the setup wizard you may remove the network cable. In the App, confirm the prompt if you would like to share music stored on your Android device. Switch to "My Music" and wait a few seconds before the music collection has been fully loaded. Done! Enjoy your new Smart Speaker for Android. A detailed manual is available online at: Android is a trademark of Google Inc.

2 Setup Guide gb was here Raumfeld One For a detailed online manual, visit

3 Quick Guide: Setting Up a New System* 1. Installing Your Raumfeld One Install the equipment as described in the chapter Installation. 2. Connecting to Your Network If you wish to set up your Raumfeld One with the Raumfeld App on your smartphone, the device must be connected via a network cable to your network router for the duration of the setup. Your smartphone must be wirelessly connected to the same network. ĕ This step is not necessary when setting up the device with a Raumfeld Controller.. ROUTER 3. Powering On Your Raumfeld One Then, power on your Raumfeld One. * If you would like to set up a new system with a Raumfeld Base, then please follow the instructions found within the Raumfeld Base s setup guide. 2

4 Quick Guide: Setting Up a New System* 4. Starting the Setup Assistant Briefly press the On/Off button to turn your Raumfeld Controller on or start the Raumfeld App. After a few seconds, the setup assistant will activate and guide you through the remaining setup procedure. 5. Setting Up Your Raumfeld One Press briefly In order to connect your Raumfeld One with your wireless access point, select Connect to Your Personal Network in the setup wizard at the Connect to Network step. Simply select your wireless network and then enter the corresponding password. Follow the on-screen instructions to configure the device and to assign it a room name. 6. Configuring Music Resources COMPUTER Music shared locally in your network can be made available to your Raumfeld System by adding it as a music resource via your Controller or the Raumfeld App under Settings> Music Resources. NAS Personal network UPnP You may also attach a USB stick or a USB HDD with an independent power supply to the active device. USB STORAGE 3

5 Contents Quick Guide Overview... 4 General Notes and Information... 5 Connections & Operational Controls... 6 Operation Modes... 7 Installation... 8 Setup Frequently Asked Questions Advice on Save Use & Maintenance Cleaning, Maintenance & Environmental Protection Overview Package Contents a 1 x Raumfeld One b 1 x Power cable a Please check if your shipment is complete and not damaged. Should your shipment be incomplete or damaged, please contact our service department before use (see page 5). b System Requirements A Raumfeld Controller or the Raumfeld App, for setup and to control audio playback A Raumfeld Base or wireless access point (IEEE g), for wireless playback 4

6 General Notes and Information Notice The information in this document may be changed without prior notice and in no way constitutes any liability on the part of Lautsprecher Teufel GmbH. No part of these instructions may be reproduced in any form or be broadcasted in any way electronically, mechanically, by photocopy or recording without the written permission of Lautsprecher Teufel GmbH. Lautsprecher Teufel GmbH Version 1.0 October 2011 Original packaging If you wish to exercise your eight-week right of return, we ask that you be absolutely sure to hold onto the packaging. We can only accept the return of the device WITH THE ORIGINAL PACKAGING. Empty boxes are not available! Complaints In case of complaint we will need the following information to process your enquiry: 1. Invoice Number Can be found on the sales slip (enclosed with the product) or on the order confirmation received as a PDF document, e.g Serial number or batch number Visible on the back side of the device, e.g. serial #: IL A-123 Contact For questions, suggestions or any other issues please contact our customer service department: Lautsprecher Teufel GmbH Gewerbehof Buelowbogen Buelowstraße Berlin (Germany) Tel.: (free of charge) Fax: +49 (0) Proper use Only use the unit as described in these instructions and in the online manual. Any other use will be deemed as not in accordance with the instructions and may lead to damage to property or even persons. The manufacturer accepts no liability for damage caused by use not in accordance with the instructions. The unit is intended for private use. Before operating the unit for the first time please read the safety notes and the setup guide carefully. This is the only way to use all functions safely and reliably. Keep the setup guide safe and pass them on to anyone who may own the unit after you. Many thanks for your support! 5

7 Connections and Operational Controls 1 Volume Control 2 Power LED 3 System LED 4 On/Off button Main power switch 6 Power cable socket 7 Audio input analogue (RCA) 8 Network connector 9 USB port (master, type A) 10 Setup button 11 Reset button 12 WLAN Antenna 6

8 Operation Modes Overview SYSTEM MODE On Powersave Sleep Mode Off SETTING THE MODE Briefly press On/Off button with the main power switch turned on System reverts automatically to powersave when inactive Briefly press On/Off button Turn main power switch off MODE CHARACTERISTICS Amplifier off, CPU throttled Amplifier, CPU and WLAN off All modules off Status Display OPERATION MODE POWER LED SYSTEM LED On / Powersave No Connection to the Raumfeld System Off / Sleep Mode On On Off On Flashing Off Setup Flashing Flashing 7

9 Installation Connecting the Raumfeld One 1. Attach the Raumfeld One to the power supply and turn on the main power switch on the back of the device. 2. Briefly press the On/Off button on the front to start the device. Continue when the System LED (right) starts blinking. 8

10 Setup Setting Up a New Raumfeld System You can operate the Raumfeld One in a system with or without the Raumfeld Base. If you have a Raumfeld Base, please consult the Base s setup guide. For setup without the Raumfeld Base, please follow the instructions below. 1. If you wish to set up your system with the Raumfeld App on your smartphone, the device must be connected via a network cable to your network router for the duration of the setup. Your smartphone must be wirelessly connected to the same network. ĕ This step is not necessary when setting up the device with a Raumfeld Controller. 2. Pick up your Raumfeld Controller or start the Raumfeld App on your smartphone. ĕ After a few seconds, the setup assistant will activate and guide you through the remaining setup procedure. 4. Follow the on-screen instructions to configure the device and to assign it a room name. 5. If you wish to add more playback devices to your Raumfeld system, select Connect More Rooms and follow the on-screen instructions. ĕ Please note that the network cable of the first device may be only removed after the completion of the entire setup process. 6. Music shared locally in your network can be made available to your Raumfeld System by adding it as a music resource via your Controller or the Raumfeld App under Settings> Music Resources. You may also attach a USB stick or a USB HDD with an independent power supply to the Raumfeld One. The music will then be available without further configuration in your Raumfeld System. 3. In order to connect your Raumfeld One with your wireless access point, select Connect to Your Personal Network in the setup wizard at the Connect to Network step. Simply select your wireless network and then enter the corresponding password. 9

11 Setup Adding to an Existing Raumfeld System Your Raumfeld One can be integrated into the Raumfeld System in two ways: Wireless via WLAN or hardwired via network cable. In either method integration takes place in a few simple steps. Wireless Network (WLAN) 1. Pick up your Raumfeld Controller or start the Raumfeld App on your smartphone. Wired Network (LAN) 1. Connect the Raumfeld One to your network router via a network cable. 2. Pick up your Raumfeld Controller or start the Raumfeld App on your smartphone. 3. Open Settings> Room Configuration and simply select Add Room > New Raumfeld Player. 4. Follow the on-screen instructions to configure the device and to assign it a room name. 2. Open Settings > Room Configuration and simply select Add Room > New Raumfeld Player. ĕ If you do not have a Raumfeld Base and you wish to set up your Raumfeld One with the Raumfeld App on your smartphone, the devicemust be connected via a network cable to your network router for the duration of the setup. 3. Follow the on-screen instructions to configure the device and to assign it a room name. 10

12 Frequently Asked Questions Access to a full list of frequently asked questions and a detailed online manual is available online at: Question 1: Music playback constantly stops. What are possible causes? ĕ Should music playback be constantly interrupted, there is probably a connection problem between the wireless playback device and your Raumfeld Base or personal access point. You can see an overview of the signal strength of all Raumfeld devices within your network by opening Settings > Network > Network Analysis. A manual for improving the signal strength can be found in the Raumfeld online manual in chapter Network Analysis. Problems can also appear when using your existing access point, specifically when there is not enough bandwidth available. Make sure when you are listening to music with Raumfeld not to transfer large files over your home WLAN. Question 2: In which case should I connect my players to my personal access point rather than the Raumfeld Base? ĕ In a system with Raumfeld Base your Raumfeld devices are connected with the Base s wireless network by default. However, in some cases it may be useful to connect one or more devices with your existing, personal access point: 1. The signal of your personal access point is stronger than the Base s signal throughout your whole house, e.g. the signal of the personal access point is repeated with a wlan repeater. In this case we suggest to connect all Raumfeld devices with your personal access point. 2. In one specific room, the signal of your personal access point is stronger than the Base s signal. In this case the playback device located in that room should be connected with your personal access point. 3. You are utilising different access points in your house that are all connected to the same network (e.g. Devolo dlan with multiple access points). Each Raumfeld device should be connected to the access point with the strongest signal in that room. In all cases it is required that your Raumfeld Base is connected to your network router. ĕ Directions regarding the connection of Raumfeld devices in other networks can be found in our online manual under the chapter Setup. Question 3: My Raumfeld One isn t shown on my Controller under Line In. What can I do? ĕ In order to be shown on the Controller under the application Line In, Raumfeld Speakers, Connectors and Raumfeld One need to be set to a mode that allows streaming their analogue input signal to other rooms. In short, the following preconditions need to be met: 1. The device has to be set up and connected to the Raumfeld system (both LEDs permanently lid). 2. The device is operated in streaming mode (see the online manual for further instructions). 11

13 Frequently Asked Questions Question 4: My USB storage is not recognized as a music resource. What are possible causes? ĕ USB storage will only be integrated as a music resource if it is connected to the host of your Raumfeld System. Should your system contain a Raumfeld Base, the Base is the host by default. For systems without a Raumfeld Base you can set the host device yourself under Settings > Network > Host Configuration. Please also note that a USB HDD connected to a Raumfeld player must have an independent power supply. For the Base, all kinds of USB HDD are supported. 12

14 Advice on Safe Use and Maintenance Warning icons The following symbols can be found in this guide: Danger High Risk! Disregard for this warning can cause life threatening damage. AttentionMiddle Risk! Disregard for this warning can cause damage to the product. Low Risk! Procedures that should be observed while handling the product. Advice on Safe Use Danger Electrical Shock Hazard! Faulty installation or high voltage may lead to electrical shock. When connecting, ensure that the voltage is correct. Further information can be found at the power cable socket of the device. In order to completely remove power from the device, unplug the power cord. In order to be easily able to remove power from the device, the plug should be easily accessible. Should the device begin to smoke, emit burning smells, or produce unfamiliar sounds immediately remove the power cord and do not turn it back on. Do not open the case of the device. The device may only be serviced by an authorized party. Unauthorized access of the device will void the guarantee. Instructions on how to proceed in case of repair will be provided by our service department. Please make sure to use only replacement components that comply with the technical specifications of the original part. This device contains electrical and mechanical parts that are essential for the protection of the unit. Only use device accessories specified by the manufacturer. Do not insert any objects into the case s air vents. Only use the product indoors. Do not expose the equipment to rain or humidity of any kind. Do not place objects filled with liquid, such as vases or bottles, anywhere near the equipment. Should water or any other foreign body make its way into the case, immediately remove the power cord. For further support please contact our service department. Constantly check the device for physical defects. Danger Danger of Explosion! Poor placement of the device can lead to an explosion. Do not use the equipment in extreme temperatures, or where there is a fire or explosion hazard. 13

15 Advice on Safe Use and Maintenance Danger Child Safety! Children can get caught in the packaging materials and suffocate. Never let your children play with the device or its packaging material. There is a risk of suffocation. Make sure that your children do not remove or pull small pieces from the device (such as cables or buttons), as they may swallow the piece and choke. Should your child have swallowed a small piece of the device, immediately contact your local hospital. Never leave children unattended while using electronic devices. AttentionRisk of Damage! Poor placement can cause damage to the device. Position the device so that it cannot be accidentally kicked and so that cables are not trip hazards. Avoid using magnetic or paramagnetic objects nearby the speakers. Keep this device away from sources of heat such as radiators and stoves and keep it out of the immediate vicinity of other devices to prevent excessive heat from developing. Do not expose the device to direct sunlight. Do not cover the ventilation openings with curtains, blankets, magazines or other similar items. Built up heat within the device can shorten its lifespan. AttentionRisk of Damage! Electrical surges caused by lightning can damage or destroy the device. As a precaution, disconnect the equipment from the power supply in the event of impending thunderstorms. Disconnect the equipment from the power supply if not in use for a prolonged period of time. AttentionRisk of Damage! Improper use of the device can cause damage. Only use a dry, soft cloth when cleaning the equipment. Detergents may affect the surface of the equipment. AttentionFire Danger! Improper use of the device may cause damage or fire. Do not place open flames such as candles or other similar items on top of the device. Make sure vent holes are not blocked when positioning the equipment. Provide adequate ventilation. 14

16 Cleaning and Maintenance Clean the device regularly with a soft, lightly damp micro fiber cloth. Pay close attention to the following details: Use as clear of a water as possible without any cleaning product. By stubborn spots use a mild combination of water and soap. Under no circumstances should harsh cleansers, alcohol, paint thinner, gasoline, or similar substances be used for cleaning. Environmental Protection Disposing of the unit Used units must not be disposed of with household waste If the unit is no longer operational, every consumer is required by law to dispose of used devices separate from household waste, e. g. at a collection point run by the communal authority borough. In this way, used devices can be recycled and waste materials disposed of in an environmentally friendly manner. For this reason, electrical equipment is labelled with the displayed symbol. 15

17 All trademarks are the property of their respective owners. For questions, suggestions or other issues please contact our customer service department: Lautsprecher Teufel GmbH Gewerbehof Buelowbogen - Aufgang D Berlin (Germany), Buelowstr. 66 Tel.: (toll-free) Fax: +49 (0) No liability is accepted for the accuracy of this information. Technical changes, typographical errors and other errors reserved.