RLC-DSP RLC-DSP402. Back. RLC-DSP402 Front. Improved Smaller Less Expensive Controller

Size: px

Start display at page:

Download "RLC-DSP RLC-DSP402. Back. RLC-DSP402 Front. Improved Smaller Less Expensive Controller"

Joseph Fox
5 years ago
Views:

RLC-DSP402 Back +12VDC Power Radio Port 1 Radio Port 2 12 Function I/O Port 10/100 Ethernet Port Optional Autopatch Port (Does not take a radio port) RLC-DSP402 Improved Smaller Less Expensive

Some of the features include: Two full-featured radio ports. Each port can operate as a repeater, remote base or link.

23 point Telemetry port supports (7) Analog Inputs, (8) Contact Closure Inputs and (8) Contact Closure Outputs. Input signals can be alarmed with high/low and normal points.

There is a 10/100 Ethernet port enabling worldwide IP linking and management over the Internet.

Just plug a RLC-DSP402 into an Ethernet port (such as in your home) and you can operate the controller using LinkATC from any place with Internet access.

1 RLC-DSP402 Back +12VDC Power Radio Port 1 Radio Port 2 12 Function I/O Port 10/100 Ethernet Port Optional Autopatch Port (Does not take a radio port) RLC-DSP402 Improved Smaller Less Expensive Controller The new RLC-DSP402 controller is derived from the highly successful RLC-DSP404 controller, but in a smaller less expensive form factor. Some of the features include: Two full-featured radio ports. Each port can operate as a repeater, remote base or link. The included RS-232 serial port provides control of HF radios and frequency controlled remote bases. Utilizing the Voice Over IP features, radios can be IP linked and operated remotely. 23 point Telemetry port supports (7) Analog Inputs, (8) Contact Closure Inputs and (8) Contact Closure Outputs. Input signals can be alarmed with high/low and normal points. Analog input readings can be scaled and calibrated using custom faceplates for voltage and temperature monitoring. There is a 10/100 Ethernet port enabling worldwide IP linking and management over the Internet. Includes the Windows management GUI and the new LinkATC, our new Amateur Tactical Control operational interface GUI. Note that a static IP address is not required for management or linking. Just plug a RLC-DSP402 into an Ethernet port (such as in your home) and you can operate the controller using LinkATC from any place with Internet access. This opens up possibilities for your group by enabling remote HF radios, linking multiple repeater sites, and setting up a global repeater network. Integrated 16 MB Flash to support the built-in Digital Voice Recorder with Voice Mail. This provides up to 30 minutes of record time. Users can record messages over the air or upload.wav files also over the network. RLC-DSP402 Front Over 500 user macros enabling custom programming of names, commands and events. 685 Word Synthesized speech library plus dynamic voice messages including time of day, date, analog input line voltages/temperatures, etc. Library includes Romeo, Juliet,and Junior s voices, as well as sound effects. Other features include: Time-of-day clock with full-featured event scheduling, digital audio delay, remote audio level adjustment, VOX mode, COR/PL lines and much more. Optional autopatch available which fits inside the included 19 rack enclosure. The autopatch supports both forward and reverse calls from either of the two radio ports. FEATURING... RLC-DSP402: Part Number: Price: $ Price includes the RLC-DSP402, 19 rack enclosure, RCI management software and LinkATC software. AMATEUR TACTICAL CONTROL OPERATIONAL INTERFACE GUI Autopatch Expansion Board Part Number: Price: $ Autopatch Option Power LED User Serial Port Radio Port Status LED s Included 19 Rack Enclosure

RLC-1 Plus Expansion Board RLC-1 Board RLC-1 Small & Affordable The RLC-1 is our smallest and most basic controller. Its two ports are most commonly used to run a repeater and a link.

The RLC-1 Plus is an expanded version of the RLC- 1 that makes it a powerful, voice based controller with 70 macros, a clock/ scheduler, HF remote base control and more.

2 RLC-1 Plus Expansion Board RLC-1 Board RLC-1 Small & Affordable The RLC-1 is our smallest and most basic controller. Its two ports are most commonly used to run a repeater and a link. The controller ID s and command responses are CW based. This model does not support an autopatch. The RLC-1 can be upgraded to the RLC-1 Plus, or can be purchased with the update already installed. The RLC-1 Plus is an expanded version of the RLC- 1 that makes it a powerful, voice based controller with 70 macros, a clock/ scheduler, HF remote base control and more. Existing RLC-1 controllers can be upgraded in the field. FLEXIBLE Dual-port design for repeater & link system Controller CW update site conditions Enter commands at either port w/dtmf Multiple ports for your growing system COST EFFECTIVE Low battery power consumption RLC-1 controls up to 2 repeaters links Low set-up time & system down time DURABLE High quality construction guarantees years of trouble-free operation RLC-1 Cabinet RLC-1: Part Number: Price: $ RLC-1 Plus Expansion Board Part Number: Price: $ Part Number:

FLEXIBLE Multi-port design ensures repeater & link system flexibility Your Controller responds in CW or Recorded Voice (optional) COST EFFICIENT Low power consumption reduces battery and overall

3 RLC-4 Board RLC-4 Auto Expansion Board RLC-4 The RLC-4 has four radio ports (three available if the optional autopatch is installed). It is a very economical way to control multiple repeaters and links. It ID s in CW; a 75 second digital voice recorder, the RLC-DVR4, is also available. FLEXIBLE Multi-port design ensures repeater & link system flexibility Your Controller responds in CW or Recorded Voice (optional) COST EFFICIENT Low power consumption reduces battery and overall system costs Allows you to control up to four repeaters or links with only one RLC-4 controller, reducing system costs Seperate connectors lower set-up time & decrease system down time DURABLE High quality construction guarantees years of trouble-free operation RLC-4: Part Number: Price: $ Autopatch Expansion Board Part Number: Price: $ Part Number: RLC-DVR4 - Voice Recorder Part Number: Price: $ RLC-4 Cabinet

RLC-Club Board RLC-Club Deluxe Board RLC-CLUB The RLC-Club is a mid-tier repeater controller with a builtin autopatch. In its base configuration, it can control a single repeater (or other radio).

The features available in each configuration are summarized below: FLEXIBLE Single port design with built-in autopatch and voice Deluxe option adds a second radio port Ports can operate independently

4 RLC-Club Board RLC-Club Deluxe Board RLC-CLUB The RLC-Club is a mid-tier repeater controller with a builtin autopatch. In its base configuration, it can control a single repeater (or other radio). It can be expanded with the Deluxe or Deluxe II options, which allow it to control more repeaters, remote bases, or links (RF or Internet). The features available in each configuration are summarized below: FLEXIBLE Single port design with built-in autopatch and voice Deluxe option adds a second radio port Ports can operate independently or be connected Upgradeable features allows for system growth COST EFFICIENT Pay only for the features that you need Easy upgrade adds additional port without new controller Separate connectors lower set-up time & decrease system down time EXPANDABLE The RLC-Club can be expanded with Deluxe and Deluxe II option boards. The Deluxe Board adds 2 Radio Ports, Supports DVR-1, 8 Output Lines, 5 Analog/Logic Input Lines and 12 Status LED s. The Deluxe II adds 6 Radio Ports, Supports DVR-1, 11 Output Lines, 5 Analog/Logic Input Lines, 3 Additional Logic Input Lines and 12 Status LED s. DURABLE FCC Part 68 telephone interface & Part 15 class A noise type accepted Multi-layer design for low noise and years of trouble-free operation RLC-Club: Part Number: Price: $ PACKAGES CLUB PKG - Price: $ RLC-Club CLUB DELUXE PKG - Price: $ RLC-Club Deluxe Option Board CLUB DELUXE II PKG - Price: $ RLC-Club Deluxe Option Board RLC-Club Deluxe Option Board Part Number: Price: $ RLC-Club Deluxe II Option Board Part Number: Price: $ Part Number: Dongle DVR-8 or DVR-16 Digital Voice Recorder Part Number: Price: RLC-Club Cabinet Non-Deluxe DVR Interface: Part Number: Price: $ 38.50

RLC-DSP404 Board The RLC-DSP404 builds upon the proven RLC-3 and RLC-Club designs, while providing advanced features that aren t available in any other product.

With its total local and network management, streaming VoIP and powerful 600 MIPS Digital Signal Processor (DSP), the RLC-DSP404 will transform your repeater system into a more versatile and

5 RLC-DSP404 Board The RLC-DSP404 builds upon the proven RLC-3 and RLC-Club designs, while providing advanced features that aren t available in any other product. In fact, it is the most advanced repeater controller ever made. The RLC-DSP404 has a fully digital audio path, built in networking for VoIP/RoIP and remote management. With its total local and network management, streaming VoIP and powerful 600 MIPS Digital Signal Processor (DSP), the RLC-DSP404 will transform your repeater system into a more versatile and efficient digital system. Supporting four native radio ports, each with a dedicated audio input, two audio outputs, COR, CTCSS logic input (each with its own pull-up and pull-down switchable resistor), PTT output and full-duplex RS-232 port, your never limited on what your radio port can interface to. All audio adjustments are controlled electronically, enabling on-site and off-site DTMF or network access to your site s audio levels. Digital voice recordings support virtually unlimited words, and multiple word libraries supporting.wav and.mp3 recordings. You can record your own words and messages and simply upload them to the controller utilizing the USB Host port from a thumb drive, or remotely using the Ethernet port. FEATURES: Digital audio path (16K samples/second) allows many features to be implemented without additional hardware (audio delay, digital voice recording, etc) and without any loss of audio quality. Voice library can be easily updated or extended using standard wav files. Windows control software makes reconfiguring things on the fly simple, provides real-time status, indicating exactly what s going on each moment. Embedded Linux operating system improves firmware and retains RLC-3 and RLC-Club flexibility with easy to use advanced features. A built-in Ethernet network interface enables remote management (which can be done over the serial port also), as well as VoIP/RoIP (Voice/Radio Over IP), over the Internet or a private network. RLC-DSP404 Cabinet RLC-DSP404 The most advanced repeater controller ever made. RLC-DSP404: Part Number: Price: $ 1, Autopatch Expansion Board Part Number: Price: $ Autopatch Expansion Board

RLC-ADM Audio Delay Module Dongle DVR RLC-MOT Squelch Module s RLC CABLES: 8 Ribbon Cable for

75 DB9F to DB9M Autopatch Cable Part Number: 600-100-0002 Price: $ 12.

DSP404 Cable Part Number: 600-100-0004 MSAT to RLC Controller Cable Part Number: 600-100-0005

RLC-2/2A Dongle - DVR8 or DVR16 for RLC-Club Part Number: 360-250-1001 Price: $ 192.

50 for RLC-1 Part Number: 360-100-0002 for RLC-4 Part Number: 360-120-1001 for RLC-Club Part

6 RLC-ADM Audio Delay Module Dongle DVR RLC-MOT Squelch Module s RLC CABLES: 8 Ribbon Cable for Deluxe Part Number: Price: $ 7.75 DB9F to DB9M Autopatch Cable Part Number: Price: $ Motorola 1225 Repeater to DSP404 Cable Part Number: Kenwood TKR850 Repeater to DSP404 Cable Part Number: MSAT to RLC Controller Cable Part Number: OPTIONS for RLC-1, RLC-4, RLC-Club, RLC-3 and RLC-2/2A for RLC-1, RLC-4, RLC-Club, RLC-3 and RLC-2/2A Dongle - DVR8 or DVR16 for RLC-Club Part Number: Price: $ RLC-DVR4 - Voice Recorder for RLC-4 Part Number: Price: $ for RLC-1 Part Number: for RLC-4 Part Number: for RLC-Club Part Number: Kenwood TK8180 to DSP 404 Cable Part Number: Tait 8115 DB-15 to RLC-Club Cable Part Number: MSAT to RLC Cable Part Number: Tait RLC-DSP404 Part Number:

2-10 Access Mode, Recall a Ports Access Mode (006) 2-8 Access Mode, Set Up a Ports Access Mode (005) 1-5 Adjusting the Receiver Port 1-5 Adjusting

2-10 Access Mode, Recall a Ports Access Mode (006) 2-8 Access Mode, Set Up a Ports Access Mode (005) 1-5 Adjusting the Receiver Port 1-5 Adjusting the RLC-3 Controller 1-5 Adjusting the Transmitter Port