V1.3 TV CONTROL BOARD SPECIFICATION. MODEL: T.MS6M182.81B-1 (Asia) Part Number: MST AUTHOR: CHECKED BY: RECHECKED1 BY: APPROVED BY:

Size: px

Start display at page:

Download "V1.3 TV CONTROL BOARD SPECIFICATION. MODEL: T.MS6M182.81B-1 (Asia) Part Number: MST AUTHOR: CHECKED BY: RECHECKED1 BY: APPROVED BY:"

Noreen Richard
5 years ago
Views:

1 V1.3 TV CONTROL BOARD SPECIFICATION MODEL: T.MS6M182.81B-1 (Asia) Part Number: MST AUTHOR: CHECKED BY: RECHECKED1 BY: APPROVED BY: PUBLISHED DATE: The information in the specification is subject to change without notice.

2 CONTENT ITEM PAGE 1.GENERAL DESCRIPTION 2 2.FUNCTION LAYOUT 2 3.FEATURES 3 4.PCB DIMENSIONS 6 5.SCHEMATICS OF IR & KEY BOARD 7 6.INTERFACE DEFINITION 7 7.CONFIGURATION & GENERAL PRECAUTIONS 11 REVISION HISTORY VERSION DATE BOARD ID PAGE DESCRIPTION AUTHOR V T.MS6M182.81B ,5,11 Modify the power supply for amplifier. Linda V V V T.MS6M182.81B T.MS6M182.81B T.MS6M182.81A Modify the board picture in part 2. Linda 2 Modify the board picture in part 2. Fanny All First issued. Fanny - 1 -

3 1. GENERAL DESCRIPTION T.MS6M182.81B-1 is an analog TV control board, which is suitable for Asia-Pacific and Middle-East market. It can support more than 26 inch LED panels which resolution is up to T.MS6M182.81B-1 s USB slot can be used for Software upgrade and multimedia playback. 2. FUNCTION LAYOUT The picture is for a reference only, the actual item is the standard. The optional connectors and terminals are marked with *. TOP VIEW OF T.MS6M182.81B-1 CNA1:Amp CNA2: Power Speaker CN1: Main *CN8: DVD CN14: LVDS CN2: Power Supply Power &Control Interface Inverter CN16: IR & *CN12: *CN6:AV *EUSB2: *CN9:DVD Key Board EXT-HDMI In or out EXT-USB Signal In - 2 -

4 FRONT VIEW OF T.MS6M182.81B-1 HDMI1 In HDMI2 In HDMI3 In Y Pb/Cb Pr/Cr PC-RGB Component In In Note: HDMI1 and external HDMI cannot coexist with each other. SIDE VIEW OF T.MS6M182.81B-1 PC Audio CVBS1 R L Component2 CVBS2 & (CVBS2 & RF Earphone Coaxial USB In In CVBS1 & Component1 Audio In In Component2) Audio In In Out Out Slot In REQUIREMENT OF WIRE HARNESS AV In Component In 3. FEATURES CHIPSET MARKET AREA OSD LANGUAGE MST6M182VS(without TELETEXT and NICAM) /MST6E182VS (with TELETEXT and NICAM) Asia-Pacific, Middle-East Chinese, English PANEL Panel Type Interface LED Single/Dual LVDS Interface Max Resolution Receiving Range 48.25MHz MHz Input impedance 75Ω VIDEO INPUT TV Video System PAL/SECAM Sound System B/G,D/K,I NICAM(only for MS6E182)/A2-3 -

5 Max storage Channels TELETEXT(only for MS6E182) 200CH 1000Pages PC-RGB Format CVBS Component HDMI Video System PAL/NTSC/SECAM Video level 1.0 V P-P ±5% 480i, 480p, 576i, 576p, 720p, 1080i, 1080p 480i, 480p, 576i, 576p, 720p, 1080i, 1080p PC Audio Earphone Input 0.2 ~ 2.0 V RMS AUDIO INPUT CVBS1 Audio Component1 Audio L/R RCA Input 0.2 ~ 2.0 V RMS CVBS2 Audio Component2 Audio L/R RCA Input 0.2 ~ 2.0 V RMS Frequency Response (1KHz 0dB reference signal) AUDIO OUTPUT Max Output power 2 8W(8Ω) (amplifier power: 12V) 2 9W(8Ω) (amplifier power: 24V) THD+N<10%@1KHz (Audio Input: 0.5V RMS ) POWER Requirement To Panel For amplifier Main board 5V, 12V 12V or 24V (CNA1, optional) 12V/5V/5VSB Management Standby Power Consumption < 0.5W(Board Only) COMB FILTER DEINTERLACE KEY FUNCTION EXPANDABLE FUNCTION 3D 3D MENU, CH+, CH-, VOL+, VOL-, INPUT, POWER DVD, External USB, External AV In or Out, External HDMI Note: Licenses involved in specifications above are supposed to be obtained by customers themselves. USB MULTIMEDIA PLAYBACK FORMAT File Codec Media Ext. Video Audio MJPEG.avi Xvid, MPEG-2, MPEG-4, DIVX, H.264 MP3, WMA, AAC Movie MPEG-2, MPEG-4, MP2, PCM, AC3.mp4 H.264.ts/ MPEG-2, H.264.trp.mkv/ MPEG-4, H.264 Remark Max Resolution And Frame Rate: @30fps Max Data Rate: 10 Mbps Max Resolution And Frame Rate: @30fps Max Data Rate: 20 Mbps - 4 -

6 Media File Ext. Video Codec Audio Remark.mov.mpg MPEG-1, MPEG-2.dat.vob MPEG-1 MPEG-2 MP2 Max Resolution: Max Data Rate: 20 Mbps Max Resolution: Max Data Rate: 20 Mbps.rm/.rmvb RV8, RV9, RV10 COOK Max Resolution And Frame Rate: 1280 Max Data Rate: 10 Mbps.mp3.wma MP3 WMA Sample Rate: 8K~48KHz Bit Rate: 16K~320Kbps Channel: Mono/Stereo Music Sample Rate: 16K~48KHz.m4a/ -- AAC Bit Rate: 32K~442Kbps.aac Channel: Mono/Stereo.jpg/ Progressive JPEG Max Resolution: jpeg Baseline JPEG Max Resolution: Max Resolution: Photo.bmp -- Pixel Depth: 1/4/8/16/24/32 bpp Non-Interlaced Max Resolution: png Interlaced Max Resolution: Text.txt ANSI/UNICODE GB/UTF8 File Size:Max 1MB File system: Hi Speed FS, FAT32, FAT16, NTFS(NTFS compressed file is not supported). Note: MP4 cannot support GMC. Note: Licenses involved in specifications above are supposed to be obtained by customers themselves. ELECTRICAL CHARACTERISTICS & REQUIREMENTS Power Supply Mode Symbol Voltage Range Max Current Ripple Startup Time Rise Time 12V or 24V/ 12V/5V/5VSB (Built-In) 24V or 12V 24V±5% 1000mA 240mV P-P 100ms 50ms (for amplifier) 12V±5% 2000mA 120mV P-P 100ms 50ms 12V 12V±5% 300mA 120mV P-P 100ms 50ms 5V 5V~5.25V 1000mA 50mV P-P 100ms 50ms 5VSB 5V~5.25V 500 ma 50mV P-P -- 50ms Note: The current of panel, inverter and extension modules are not included in max current. The power supply for amplifier is optional, 12V or 24V. As amplifier power is different, circuits are different. The amplifier power should be identified with the actual item

7 SUBSTITUTABLE PRIMARY MATERIALS The table is for reference only, the actual item is the standard. NAME TYPE BRAND BACKUP TYPE BACKUP BRAND FLASH GD25Q32SIP (32M bits) GIGA MX25L3206EM2I-12G W25Q32BVSSIG S25FL032POXMF1011 Macronix Winbond Spansion W9751G6JB-25 Winbond NT5TU32M16DG-AC DDR Nanya H5PS5162GFR-S5C Hynix (512M bits) K4T51163QI-HCF7 Samsung AMPLIFIER TPA3110D2 TI TUNER CDT-3SP5I2-36 China Dragon F02WT-3DSR-E AFT7W130G ET-9L1E-E01WR TCL QinJia GDC 4. PCB DIMENSIONS The size of T.MS6M182.81B-1 is 180mm(L)*169mm(w)*18 mm(h). NO. DESCRIPTION 1 HDMI1 2 HDMI2 3 HDMI3 4 YPbPr1-Y IN 5 YPbPr1-PbIN 6 YPbPr1-Pr IN 7 VGA IN 8 PC AUDIO IN 9 CVBS1 IN 10 CVBS1/YPbPr1 RIN 11 CVBS1/YPbPr1 LIN 12 YPbPR2 IN 13 AV2 IN /YPbPr2 AUDIO IN 14 RF IN 15 EARPHONE OUT 16 COAX OUT 17 USB IN - 6 -

8 5. SCHEMATICS OF IR BOARD & KEY BOARD Note: The Dividing resistor must be is the smallest, which is corresponding to the power key(default is K0 or K6) on the key board. Otherwise, the other keys with the smaller resistor than power key may boot. 6. INTERFACE DEFINITION The optional connectors are marked with *. CN1(10PIN/2.54): BUILT-IN POWER SUPPLY CONNECTOR 1 5VSB Power Supply Standby 2 PWON Power Supply Standby Control 3 GND 4 GND 5 P5V 6 P5V 7 5V 8 5V +5V Power Supply for Panel Main +5V Power Supply 9 GND 10 12V +12V DC Power Supply - 7 -

9 CN2 (6PIN/2.0): INVERTER CONNECTOR 1 12V +12V DC Power Supply 2 12V +12V DC Power Supply 3 BLO Back-Light ON/OFF Control for Panel 4 ADJ Brightness Adjustment for Panel 5 GND 6 GND *CN6(5PIN/2.0): AV IN OR OUT CONNECTOR 1 CVBS CVBS Signal Input/Ouput 2 GND 3 AVL CVBS Audio Left Channel Input/Ouput 4 GND 5 AVR CVBS Audio Right Channel Input/Ouput *CN8(8PIN/2.0): DVD POWER & CONTROL CONNECTOR 1 D5V 2 D5V 3 GND 4 GND +5V DC Power Supply for DVD 5 D12 +12V DC Power Supply for DVD 6 DIR IR Data Transfer to DVD 7 DAT/RX Data Receiver/Serial Data Receiver 8 STB/TX DVD Standby Control/Serial Data Transmitter *CN9(11PIN/2.0): DVD SIGNAL INPUT CONNECTOR 1 NC No Connection 2 GND 3 DRI DVD Audio Right Channel Input 4 GND 5 DLI DVD Audio Left Channel Input 6 DPB DVD Component-Pb Input 7 GND 8 DPR DVD Component-Pr Input 9 GND 10 DY DVD Component-Y Input 11 GND - 8 -

10 *CN12(2x10PIN/2.0): EXTERNAL HDMI CONNECTOR 1 HDMI_RX2+ HDMI 2+ Signal 2 HDMI_RX2- HDMI 2- Signal 3 HDMI_RX1+ HDMI 1+ Signal 4 HDMI_RX1- HDMI 1- Signal 5 HDMI_RX0+ HDMI 0+ Signal 6 HDMI_RX0- HDMI 0- Signal 7 HDMI_RXC+ HDMI Clock+ Signal 8 HDMI_RXC- HDMI Clock- Signal 9 HDMI_SCL HDMI DDC I 2 C SCL 10 HDMI_SDA HDMI DDC I 2 C SDA 11 GND 12 GND 13 POW_SINK HDMI 5V 14 HPD_CON Hot Plug Detect 15 GND 16 GND 17 CEC CEC Signal 18 +5V +5V DC Power Supply 19 M_SCL Main I 2 C SCL 20 M_SDA Main I 2 C SDA CN14(2 20PIN/2.0): LVDS INTERFACE CONNECTOR NOTE: PIN31~40 are optional. The connector or each PIN can refer to the panel specification. 1 VSEL 2 VSEL Power Supply for Panel 3 VSEL 4 GND 5 GND 6 GND 7 RXO0- LVDS ODD 0- Signal 8 RXO0+ LVDS ODD 0+ Signal 9 RXO1- LVDS ODD 1- Signal 10 RXO1+ LVDS ODD 1+ Signal 11 RXO2- LVDS ODD 2- Signal 12 RXO2+ LVDS ODD 2+ Signal 13 GND 14 GND 15 RXOC- LVDS ODD Clock- Signal 16 RXOC+ LVDS ODD Clock+ Signal 17 RXO3- LVDS ODD 3- Signal - 9 -

11 18 RXO3+ LVDS ODD 3+ Signal 19 RXE0- LVDS EVEN 0- Signal 20 RXE0+ LVDS EVEN 0+ Signal 21 RXE1- LVDS EVEN 1- Signal 22 RXE1+ LVDS EVEN 1+ Signal 23 RXE2- LVDS EVEN 2- Signal 24 RXE2+ LVDS EVEN 2+ Signal 25 GND 26 GND 27 RXEC- LVDS EVEN Clock- Signal 28 RXEC+ LVDS EVEN Clock+ Signal 29 RXE3- LVDS EVEN 3- Signal 30 RXE3+ LVDS EVEN 3+ Signal *31 GND *32 GND *33 CON1 Logic Level Control (Default For High Level) *34 NC No Connection *35 VSEL1 Reserved Power or I 2 C SCL *36 VSEL2 Reserved Power or I 2 C SDA *37 RXO4- LVDS ODD4- Signal *38 RXO4+ LVDS ODD4+ Signal *39 RXE4- LVDS EVEN 4- Signal *40 RXE4+ LVDS EVEN 4+ Signal CN16(14PIN/2.0): KEY & IR BOARD CONNECTOR 1 5V +5V DC Power Supply 2 RED Red Indicator 3 GRN Green Indicator 4 IR IR Receiver 5 GND 6 K0 K0 7 K1 K1 8 K2 K2 9 K3 K3 10 K4 K4 11 K5 K5 12 K6 K6 13 K7 K7 14 GND

12 CNA1(4PIN/2.54): AMPLIFIER POWER SUPPLY CONNECTOR 1 24V 2 24V 3 GND 4 GND DC Power Supply (12V or 24V, optional) CNA2 (4PIN/2.54): SPEAKER CONNECTOR 1 LOUT+ Audio Left Channel Output+ 2 LOUT- Audio Left Channel Output- 3 ROUT- Audio Right Channel Output- 4 ROUT+ Audio Right Channel Output+ *EUSB2(4PIN/2.0): EXTERNAL USB CONNECTOR 1 5V +5V DC Power Supply for USB 2 DM USB Data- 3 DP USB Data+ 4 GND 7. CONFIGURATION & GENERAL PRECAUTIONS Relative humidity: 80%. Storage temperature: -10~60 C. Operation temperature: 0~40 C. Protect the board from static electricity in case of damage to the IC. Keep the board away from conductor when it is working. Don t push or pull the connectors when the board is working. Don t press, distort or disassemble the board. Clean the board with soft dry cloth when it s dirty. Don t wire in the board to power supply before panel is correctly connected

V1.1 TV CONTROL BOARD SPECIFICATION. MODEL: T.MS6M182.21B(Asia) Part Number: MST AUTHOR: CHECKED BY: RECHECKED1 BY: RECHECKED2 BY:

V1.1 TV CONTROL BOARD SPECIFICATION. MODEL: T.MS6M182.21B(Asia) Part Number: MST AUTHOR: CHECKED BY: RECHECKED1 BY: RECHECKED2 BY: V. TV CONTROL BOARD SPECIFICATION MODEL: T.MS6M8.B(Asia) Part Number: MST-050 AUTHOR: CHECKED BY: RECHECKED BY: RECHECKED BY: APPROVED BY: PUBLISHED DATE: 0-05-0 The information in the specification is