1. Installation instruction:

Size: px

Start display at page:

Download "1. Installation instruction:"

Byron Hill
6 years ago
Views:

E06LR20004 This interface can insert navigation video, reverse camera video, DVR system, DVD or Digital TV video onto

All the above 3 models have the same installation.

OEM speaker is used for navigation sound, also can use external speaker.

1 E06LR20004 This interface can insert navigation video, reverse camera video, DVR system, DVD or Digital TV video onto the Land rover, Jaguar wide screens, etc. with 10inch screen, single screen display. All the above 3 models have the same installation. Features: E06LR20004 model has the built-in wince navigation, very simple connection. OEM speaker is used for navigation sound, also can use external speaker. OEM touch screen can be use to control inserted MP5, Navigation, DVR and so on. OEM Mode key is used to switch among each video. FN model has also the multimedia audio and video player for MP3/MP5 files playing. The files can be stored by U-disk or SD card. OEM Aux can be used for high quality sound. 1

This interface has the high quality image processor inside.

images on car screens in high quality, including live traffic, waze

Dismantle the OEM screen(see below picture) 2.

Take down this small original board and connect the white ribbon in

2 This interface has the high quality image processor inside. Together with the wireless mirror link box, it can mirror the phone images on car screens in high quality, including live traffic, waze and so on. 1. Installation instruction: 1. Dismantle the OEM screen(see below picture) 2. Open the back shell and replace OEM shell2 by our shell Take down this small original board and connect the white ribbon in place of the original one. 4. Put back the original small board together with the replacement shell and connect correctly these ribbons. 2

3 5. Fix these screws. 6. Connect these ribbons with our Sub-board correctly. 7. Fix our sub-board and let the LVDS cable go outside here. 8. Fix this back shell together with the frame. 3

Connect this yellow wire to OEM BATT, and connect this Black wire to GND Connect this brown wire to the yellow/white wire behind OEM head unit

4 Connect this red wire (ACC-OUT)to ACC. This ACC-OUT wire can supply power to added devices [max: 1A]. Connect this Camera in to reverse camera. connect this connector to external keypad for manual switch. Connect this yellow wire to OEM BATT, and connect this Black wire to GND Connect this brown wire to the yellow/white wire behind OEM head unit to use OEM key to switch. Reverse power output wire: can connect camera here for power. When install 360 systems or switch to reverse camera manually, pull out this connector, and connect this end, marked with in, to power. 4

2. User instruction: (1) navigation startup When starting up the navigation, if there is no SD card inserted, you will be asked to calibrate the touch screen.

You can also select to go to map directly at the map bottom. (2)setting When pressing the left upper icon, it will get back to menu.

GPS monitor: this icon is used to observe the GPS signal. Navigation baud rate: 9600, COM2 port. This navigation will be compatible with other baud rate automatically according to the map.

5 2. User instruction: (1) navigation startup When starting up the navigation, if there is no SD card inserted, you will be asked to calibrate the touch screen. Just follow to click each icon until it disappear. Then you will see the navigation menu. Each icon will have its own function. When pressing Navigation, it will go to navigation map. You can also select to go to map directly at the map bottom. (2)setting When pressing the left upper icon, it will get back to menu. You will see 8 icons here: Navigation setting: this icon is use to select the suitable map on SD card and set the path. Next time startup, it will remember this option automatically. GPS monitor: this icon is used to observe the GPS signal. Navigation baud rate: 9600, COM2 port. This navigation will be compatible with other baud rate automatically according to the map. General setting: this is mainly used to set the GPS system language. Touch screen: this is used to calibrate the touch screen when necessary. Screen: this is used to adjust the screen position, brightness etc. It has no function here. Volume: this is for key tone, usually select close Time: time setting, usually not use, it will show the GPS time when using map. System: it will show the system internal storage condition. (3)Entertainment This navigation module includes the powerful ARM A6 processor and entertainment processor. So, the MP3, MP5 files can be played fluently. Connect the AUX cable then can use OEM speaker for quality sound. USB covert cable is available for external USB storage, MP3, MP5 files stored here can be played, too. (4)Navigation module software update When the navigation system update, you just need to put the software into SD card, insert it and power up, it will update automatically. It will pop up the calibration image after finishing the update. 5

3. DIP setting DIP Down(=ON) Up(=OFF) 1 RGB on RGB off 2,3 AV1/2 on AV1/2 off 4 External navigation=high resolution External navigation=low resolution 5 When reversing[green wire=12v] : switch to

User instruction: (1)Switch: Mode This original key is used to switch displays among each video. Users can also use the external keypad to switch.

This interface has already included varied IR code for different video devices. Users can select the correct one through 3 side buttons.

6 3. DIP setting DIP Down(=ON) Up(=OFF) 1 RGB on RGB off 2,3 AV1/2 on AV1/2 off 4 External navigation=high resolution External navigation=low resolution 5 When reversing[green wire=12v] : switch to When reversing[green wire=12v] : added reverse camera video. switch to OEM reverse camera video. 6 No function, stay up. 7,8 No function, stay up. 4. User instruction: (1)Switch: Mode This original key is used to switch displays among each video. Users can also use the external keypad to switch. (2)Digital TV/DVD/DVR operation: When on AV1/AV2 video, and touch the screen, there will pop up on screen the control menu, press each icon. This interface has already included varied IR code for different video devices. Users can select the correct one through 3 side buttons. When pressing the Menu there will pop up the menu, and you can select in AV1 option the TV, DVR, or DVD. And in the AV2 option, you can also select TV and other devices. When selecting to None, this control setting frame will be closed. White/gray wire[ir-out]:it has powerful output capacity, can support maximum 5 external devices. (3)reverse When reversing, the green wire will output 12V, which can give power to reverse camera. It will display the corresponding video according to the DIP5 setting. Display OEM camera video[dip5=off]or display added camera video[dip5=on] 6

7 5. Parameter No. Name Parameter 1 Video input range 0.7Vpp with 75 Ω impedance 2 sync amplitude 3~5Vpp with 5K ohm impedance Sync should be negative polarity 3 Map resolution set by DIP4. High resolution:800x480 or VGA(640X480) 4 Av1, cam video 0.7Vpp with 75 Ω impedance 5 Av1, cam format NTSC/PAL/SECAM convert automatically 6 Normal work power consumption 2.4W 7 Standby current < 10uA 8 Reverse trigger threshold >5V trigger 9 SD map SD card storage,support varied map formats: NaviOne,navitel, Sygic, Igo,Primo etc. 10 Work temperature -40 ~ +85C 11 size 15.22cm * 9cm * 2.1cm 12 Navigation control 4-wire touch screen 13 USB port Max 1A output,with OTG Navigation module parameter 1 processor SiRFatlasVI (800M Cortex A M DSP) 2 RAM 256 MB DDR3 (support max 512MB) 3 FLASH 128MB (support max 8GB) 4 Software storage SD card(support SDHC) 5 OS system WINCE6.0 CORE 6 Audio type ape flac aac wav mp3 wma ogg 7 Video type rmvb mp4 3gp mov avi divx xvid wmv mpg rm flv mkv 8 Video decode performance QVGA>25 FPS 9 Software compile type ARMV4I 7

E06FO The features are:

E06FO The features are: E06FO100001 This interface can insert high definition RGB navigation video, DVR,360 parking system and reverse camera video onto Sync3 car screens. The car models are 2016 Lincoln, Ford mustang and some