CE LIVRET D INSTRUCTIONS PEUT CONTENIR DES ERREURS ET DES OMISSIONS LE DESIGN ET LES CARACTÉRISTIQUES SONT SUJETS AUX CHANGEMENT SANS PRÉAVIS

Transcription

1 THIS INSTRUCTION BOOK MAY CONTAIN ERRORS AND OMISSIONS. DESIGN AND SPECIFICATION ARE SUBJECT TO CHANGE WITHOUT NOTICE. ESTE MANUAL DE INSTRUCCIONES PUEDE CONTENER ERRORES Y OMISIONES. EL DISEÑO Y LAS ESPECIFICACIONES ESTÁN SUJETOS A CAMBIO SIN PREVIO AVISO. CE LIVRET D INSTRUCTIONS PEUT CONTENIR DES ERREURS ET DES OMISSIONS LE DESIGN ET LES CARACTÉRISTIQUES SONT SUJETS AUX CHANGEMENT SANS PRÉAVIS

2 IMPORTANT SAFETY INSTRUCTIONS RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER- SERVICEABLE PARTS INSIDE, REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The symbol for Class II (Double Insulation) CAUTION: THIS DIGITAL CD PLAYER EMPLOYS A LASER SYSTEM. TO ENSURE PROPER USE OF THIS PRODUCT, PLEASE READ THIS OWNER S MANUAL CAREFULLY AND RETAIN FOR FUTURE REFERENCE. SHOULD THE UNIT REQUIRE MAINTENANCE, CONTACT AN AUTHORIZED SERVICE LOCATION-SEE SERVICE PROCEDURE. USE OF CONTROLS, ADJUSTMENTS OR THE PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. TO PREVENT DIRECT EXPOSURE TO LASER BEAM, DO NOT TRY TO OPEN THE ENCLOSURE. VISIBLE LASER RADIATION MAY BE PRESENT WHEN THE ENCLOSURE IS OPENED. DO NOT STARE INTO BEAM. DANGER INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCK FAILED OR DEFEATED. AVOID DIRECT EXPOSURE TO LASER BEAM. LASER SAFETY This unit employs an optical laser beam system in the CD mechanism, designed with built -in safeguards. Do not attempt to disassemble, refer to qualified service personnel. Exposure to this invisible laser light beam may be harmful to the human eye. THIS IS A CLASS-1 LASER PRODUCT. USE OF CONTROLS, OR ADJUSTMENTS OR PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN, MAY RESULT IN HAZARDOUS LASER LIGHT BEAM EXPOSURE. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. WARNING Since CD circuitry may cause interference with other radio tuners nearby, switch this player off when not in use or move it away from an affected radio tuner. To prevent fire or shock hazard, do not expose this appliance to rain or moisture. The apparatus should not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus. The ventilation should not be impeded by covering the ventilation openings with items, such as newspapers, table-cloths, curtains, etc. No naked flame sources, such as lighted candlaes, should be placed on the apparatus. The mains plug is used as the disconnect device, the disconnect device should remain readily operable. In order to disconnect the apparatus from the mains completely, the mains plug should be disconnected from the mains socket outlet completely. SURGE PROTECTORS: It is recommended to use a surge protector for AC connection. Lightning and power surges ARE NOT covered under warranty for this product. Disposal: Please dispose of this product responsibly at approved waste or recycling facilities. Do not dispose of in household waste. GB - 1

3 IMPORTANT SAFETY INSTRUCTIONS FOR UK ONLY For your own safety read following instructions carefully before attempting to connect this CD Player to the mains. Mains Supply 220V - 240V~ 50Hz - AC only This unit is designed to operate on a 220V-240V~ 50Hz supply only. Connecting it to other power sources may damage it. Ensure that the supply corresponds to the information on the rating label on the rear panel of the unit. This component system may be fitted with a non-rewireable plug. If it is necessary to change the fuse in a non-rewireable plug the fuse over must be refitted. If the fuse cover becomes lost or damaged, the plug must not be used until a replacement, available from the manufacturer, is obtained. It is important that the colour of the replacement fuse cover corresponds with the colour marking on the base of the plug. If the plug needs to be changed because it is not suitable for your socket, or becomes damaged, it should be cut off and an appropriate plug fitted following the wiring instructions below. The plug must then be disposed of safely, as insertion into a 13A socket is likely to cause an electrical hazard. IMPORTANT The wires in the mains plug should be connected as shown in the diagram. The colours of the wires in the mains lead of the unit may not correspond with the coloured markings identifying the terminals in your plug. Connect them as follows:- The wire which is coloured blue must be connected to the terminal which is marked with the letter N or coloured black. The wire which is coloured brown must be connected to the terminal which is marked with the letter L or coloured red. There should be no connectin to the earth terminal of your plug. If a 13 Amp (BS1363) Plug is used, a 3 Amp Fuse must be fitted, or if any other type of Plug is used a 3 Amp or 5 Amp Fuse must be fitted, either in the Plug or Adaptor, or on the Distribution Board. BLUE (NEUTRAL) OUTER SLEEVE CORD GRIP FUSE BROWN (LIVE) GB - 2

4 LOCATION OF CONTROLS 1. Open Button Press to open the top cabinet cover. 2. Handles 1 3. Speakers 4. CD. Line In Button Switch to CD or Line-In mode. 5. Skip Button Press to skip (forward) a track; press and hold to 2 search through the disc. 6. Skip Button Press to skip (backward) a track; press and hold to search through the disc. 7. Display 8. Line In Socket 9. Stop Button Press to stop the CD 10. Volume +/- Buttons Press to raise or lower the volume 11. Button Press to turn the unit on; press again to turn the unit off 12. Play / Pause Button Press to Play or Pause the CD 13. AC Line Cord 14. Top Cabinet Cover 15. Storage compartments 16. CD Compartment Door Top heart shape will light up after top cabinet cover is open when power is ON. 17. CD Door Open Lift to open the CD compartment door GB - 3

5 Preparation CD BASIC OPERATION 1. Press the button once to turn unit on. 2. Press the CD.LINE IN button ( ) to select CD mode. 3. Press the OPEN button to open the top cabinet cover. 4. Lift open the CD compartment door and place a CD, label side up, onto the spindle. Close the CD door by pushing down on the front edge. 5. Player initializes by scanning the disc then displaying the total number of tracks available. 6. Press Volume +/- button to increase or decrease sound level. General Operation PLAY Press the PLAY/PAUSE button to start disc play in original order. PAUSE During "PLAY" press the PAUSE/PLAY button to pause play. "TRACK NO." will flash on display. Press once again to resume play. STOP Press the STOP button to stop disc play at any time. SKIP Press to skip (forward) a track; press and hold to search through the disc. Press to skip (backward) a track; press and hold to search through the disc. LINE IN OPERATION Caution : Turn off power and disconnect from the mains supply before connection. Connect to other audio equipment, including VCR, video recorder, MP3 to provide sound output for other auido equipment. Preparation 1. Connect these audio equipments LINE OUTPUT to LINE IN socket of the unit through an audio cable (not included). 2. Press the button once to turn unit on. 3. Press CD.LINE IN button ( ) to select Line-In function. 4. Press Volume +/- button to increase or decrease sound level. GB - 4

6 CARE AND MAINTENANCE Caring for Discs Treat the disc carefully. Handle the disc only by its edges. Never allow your fingers to come in contact with the shiny, unprinted side of the disc. Do not attach adhesive tape, stickers, etc. to the disc label. Clean the disc periodically with a soft, lint-free, dry cloth. Never use detergents or abrasive cleaners to clean the disc. If necessary, use a CD cleaning kit. If a disc skips or gets stuck on a section of the disc, it is probably dirty or damaged (scratched). When cleaning the disc, wipe in straight lines from the center of the disc to the outer edge of the disc. Never wipe in circular motions. Discs should be stored in their cases after each use to avoid damage. Do not expose discs to direct sunlight, high humidity, high temperatures or dust, etc. Prolonged exposure or extreme temperatures can warp the disc. Do not stick or write anything on either side of the disc. Sharp writing instruments, or the ink, may damage the surface. Cleaning the Unit To prevent fire or shock hazard, disconnect your unit from the AC power source when cleaning. The finish on your unit may be cleaned with a dust cloth and cared for as other furniture. Use caution when cleaning and wiping the plastic parts. Mild soap and a damp cloth may be used on the front panel. TROUBLESHOOTING GUIDE Check the following guide for the possible cause of a problem before contacting service. Symptom Player will not turn on. Disc will not play Erratic CD playback No sound from speakers Cause AC line cord not connected. CD Compartment not closed. Disc inserted incorrectly. Diry or defective disc. Moisture condensation on disc. Dirty or defective disc. Player is subject to vibrations or physical shock. Laser lens is dirty. button not selected to ON Voulme +/- button not controlled CD.LINE IN button not selected correctly. SPECIFICATIONS Power source AC 220V-240V ~ 50Hz Power consumption 12W Frequency response ,000 Hz Power Output 1W + 1W Speaker 3" 8 ohms x 2 External dimensions 288 (L) x 200 (W) x 206 (H) mm * Design and specification are subject to change without notice. GB - 5 Correction Check AC line cord connecting. Close CD Compartment. Reinsert disc correctly. Try another disc. Wipe disc with soft cloth. Clean or replace disc. Change the installation location. Clean using a quality laser lens cleaner. Press the button to ON ( ). Press the VOLUME + button to increase sound level. Press the CD.LINE IN button to CD mode ( ), or Line-In mode ( )