Sentinel Data Loggers

Transcription

1 Sentinel Data Loggers Voltage & Current Real-time display of waveforms and harmonics! Three- and four-channel voltage and current loggers True RMS measurements DC measurements (model dependent) Low-cost, self-contained and portable Includes DataView software for instrument configuration, data storage, real-time display, analysis and report generation Battery and line powered models USB 2.0 compliant communications port Records over 480,000 measurements (1MB) Three programmable storage modes Programmable storage rates Programmable start/stop times

2 SENTINEL DATA LOGGER Voltage & Current The Model SDL A302 recording AC current on a three-phase power panel. The Sentinel Data Logger line includes three- and four- channel voltage or current recording devices with Alkaline or rechargeable battery packs (model dependent). Line tracking is performed such that 64 samples over one line cycle are taken. Frequency tracking is performed over the range of ±3Hz around the nominal line frequency (50 or 60Hz). Measurements are calculated from these 64 samples for all input channels. The Sentinel records RMS values for each of the inputs at a rate of up to four times per second. Measurements for each channel are taken sequentially. RMS calculations from the 64 samples are performed on each single line cycle measured for each input. DC measurements are also on all voltage models and probe dependent on current models. The main advantage of the Sentinel logger is its ability to perform a variety of recording tasks with easy and intuitive setup from a computer using the DataView software, which is included. Analog information on the input is sampled and converted to a digital signal. This digital signal is processed and stored along with scale and time information. An optically isolated Universal Serial Bus (USB) port facilitates the transfer of data from internal memory to the computer for analysis. Features Isolated differential inputs Record voltages up to 600Vac or 850Vdc on voltage models Record current from ma to 3000Aac (model dependent) Real-time display of waveforms and harmonics Three- and four-channel models available Records up to 480,000 measurements (1MB) Programmable storage rate from four per second to one per 12 hours Three programmable storage modes Simple one button operation with color LED indication Comprehensive data analysis and reporting software included Storage Modes Extended Recording Mode (XRM ) This unique recording mode provides the opportunity to continuously record over long periods of time by reducing the stored samples of the oldest data and maintaining matching resolution for the newest data. Each time the memory fills using XRM every other stored sample is discarded making room for newer samples. This process continues until the recording is manually stopped. FIFO When the memory is full, a block of the oldest stored data is discarded to make room for the new sampled data. The sample/storage rate is unchanged. Stop When Full The memory is filled at the programmed sample/storage rate from four per second to one every 12 hours. When the memory is full, the recording stops automatically. Three LEDs on the front panel (red, yellow and green) indicate recording and memory status at a glance. User selectable storage rate, recording length and recording modes are provided. 2 Technical Assistance (800)

3 Sentinel AC & DC Voltage Logger Models SDL V301 & SDL V401 Model SDL V401 Specifications Models SDL V301 SDL V401 Electrical Number of Channels Three Four Input Termination Recessed banana jacks Voltage Range 0 to 600Vac; 0 to 850Vdc Resolution 0.1V Accuracy 5 to 85V: ±1% of Reading ± 0.6V 85 to 600Vac/850Vdc: ±0.25% of Reading ± 0.6V Sample Rate 64 samples/cycle Storage Rate Programmable from 250ms to 12 hours Storage Technique Stop when full, FIFO, and Extended Recording Mode (XRM ) Memory Capacity 480,000 measurements (1MB) USB 2.0 optically isolated Controls One button to turn logger on/off and start/stop recording Indicators Red, Yellow and Green status indicators Power Source Four 1.5V C AC power/rechargeable Alkaline batteries NiMH batteries Battery Life* 100 hours to 90 days Power ride through 10 hours Mechanical Protection Index IP50 Dimensions 6.73 x 4.76 x 2.17" (171 x 121 x 55mm) Case Material Polycarbonate UL94 V-2 Environmental Operating Temperature 14 to 122 F (-10 to 50 C) Storage Temperature -4 to 140 F (-20 to 60 C) Relative Humidity 0 to 85% RH Safety Safety Rating 600V Cat. III, 300V Cat. IV Double Insulation Yes *Dependent on sample rate. The Sentinel Voltage Logger Models SDL V301 and SDL V401 are designed for recording AC and DC voltages. Available in both three- and four-channel models, they are easy to configure and use. Features True RMS voltage measurements DC voltage measurements Low-cost, self-contained, portable Differential three-phase inputs Programmable storage mode Programmable data storage rate Records up to 480,000 measurements (1MB) 64 samples per cycle Includes DataView software Optically isolated USB 2.0 communication 600V Cat. III, 300V Cat. IV Applications Phase unbalance monitoring Surge and Sag recording Line surveys Battery bank monitoring Sentinel Voltage Logger Model SDL V301 includes three sets of color-coded (black and red) leads and alligator clips (one set pictured above). Model SDL V401 includes four sets of color-coded (black and red) leads and alligator clips. Model SDL V301 recording three-phase voltage on a lighting panel. Technical Assistance (800)

4 Sentinel Current Logger Models SDL A301, SDL A302, SDL A303 & SDL A304 Specifications Model SDL A302 Models SDL A301 SDL A302 SDL A303 SDL A304 Electrical Number of Channels Three Three Three Three Input Termination Hard-wired flexible CTs Hard-wired flexible CTs Hard-wired flexible CTs Hard-wired flexible CTs Current Range 5 to 1000A 15 to 3000A 5 to 1000A 15 to 3000A Resolution 0.1A 0.25A 0.1A 0.25A Accuracy ±1% of Reading ± 1.5A Sample Rate 64 samples/cycle Storage Rate Programmable from 250ms to 12 hours Storage Technique Stop when full, FIFO, and Extended Recording Mode (XRM ) Memory Capacity 480,000 measurements (1MB) USB 2.0 optically isolated Controls One button to turn logger on/off and start/stop recording Indicators Red, Yellow and Green status indicators Power Source Four 1.5V C Four 1.5V C AC power/rechargeable AC power/rechargeable Alkaline batteries Alkaline batteries NiMH batteries NiMH batteries Battery Life* 100 hours to 45 days 100 hours to 45 days Power ride through 10 hours Power ride through 10 hours Mechanical Protection Index IP50 Dimensions 6.73 x 4.76 x 2.17" (171 x 121 x 55mm) Case Material Polycarbonate UL94 V-2 Environmental Operating Temperature 14 to 122 F (-10 to 50 C) Storage Temperature -4 to 140 F (-20 to 60 C) Relative Humidity 0 to 85% RH Safety Safety Rating 600V Cat. III, 300V Cat. IV Double Insulation Yes *Dependent on sample rate. The Sentinel Current Logger Models SDL A301, SDL A302, SDL A303 and SDL A304 are designed for recording AC current through integral flexible current probes for each input. Features True RMS current measurements Low-cost, self-contained, portable Integral 24" flexible current probes for three-phases Measures up to 1000A or 3000A Programmable storage mode Programmable storage rate Records up to 480,000 measurements (1MB) 64 samples per cycle Includes DataView software Optically isolated USB 2.0 communication AC powered with rechargeable NiMH batteries (Models SDL A303 and SDL A304) 600V Cat. III, 300V Cat. IV Applications Load monitoring HVAC monitoring Energy management Preventative maintenance 4 Technical Assistance (800)

5 Sentinel Current Logger Models SDL A401 & SDL A402 Specifications Models SDL A401 SDL A402 Electrical Number of Channels Four Four Input Termination Sensor Type 24" AmpFlex Flexible Probe CT with 1V output* Current Range 5 to 1000A or 15 to 3000A, Probe dependent sensor dependent Resolution 0.25A Probe dependent Accuracy ±1% of Reading ± 1.5A Probe dependent Sample Rate 64 samples/cycle Storage Rate Programmable from 250ms to 12 hours Storage Technique Stop when full, FIFO, and Extended Recording Mode (XRM ) Memory Capacity 480,000 measurements (1MB) USB 2.0 optically isolated Controls One button to turn logger on/off and start/stop recording Indicators Red, Yellow and Green status indicators Power Source AC power/rechargeable NiMH batteries Battery Life Power ride through 10 hours Mechanical Protection Index IP50 Dimensions 6.73 x 4.76 x 2.17" (171 x 121 x 55mm) Case Material Polycarbonate UL94 V-2 Environmental Operating Temperature 14 to 122 F (-10 to 50 C) Storage Temperature -4 to 140 F (-20 to 60 C) Relative Humidity 0 to 85% RH Safety Safety Rating 600V Cat. III, 300V Cat. IV (factor of current probe) Double Insulation Yes *Use only specified current probes Model SDL A402 The Sentinel Current Logger Models SDL A401 and SDL A402 are designed for use with AEMC detachable current probes or AmpFlex sensors (model dependent see chart on page 11). Features True RMS current measurements DC current measurements when used with Hall Effect Current Probes on Model SDL A402 Low-cost, self-contained, portable Measures up to 1000A (probe dependent) (see Current Probe chart on page 11) Programmable storage mode Programmable storage rate Records up to 480,000 measurements (1MB) 64 samples per cycle Includes DataView software Optically isolated USB 2.0 communication Detachable current probes 600V Cat. III, 300V Cat. IV Applications Load profiling Energy management Preventative maintenance Stray current monitoring Model SDL A402 recording phase and neutral currents on a feeder. Technical Assistance (800)

6 Software Data Analysis and Reporting Software Features Display and analyze real-time waveform and harmonic data on your PC* Display waveforms, trend graphs, harmonics and text summaries Configure all data logger functions and parameters from your PC including sample rate, recording length, channel configuration and more Create and store a complete library of configurations that can be uploaded to the logger as needed Zoom in and out and pan through sections of the graph to analyze the data Download, display and analyze recorded data Create custom views and reports Print reports using standard or custom templates you design Free on-line software upgrades Minimum system Requirements *Real-time data is not stored in the logger, but can be stored in your PC on demand. System configuration as well as data retrieval and analysis is easily accomplished using DataView and Sentinel connected to your computer using a USB port. Windows 2000/XP/Vista 128MB of RAM for Windows 2000 (256MB recommended) 256MB of RAM for Windows XP 512MB of RAM for Windows Vista 80MB of hard disk space (200MB recommended) CD-ROM Drive DataView is included with all Sentinel Loggers Typical report printout showing graphical text and information from recorded data. 6 Technical Assistance (800)

7 Dataview Displays Tabbed configuration dialog boxes allow for easy setup of all recording functions. Recorded data dialog box allows clear and easy access to all stored data sessions in the Sentinel data logger. You can choose an individual session or all sessions to download. Technical Assistance (800)

8 Dataview Displays Clear and easy-to-read status update is displayed when DataView and Sentinel Loggers connect. From this menu you can view real-time data, download recorded data and configure the Sentinel Logger. Typical real-time waveform display of data being monitored or recorded. 8 Technical Assistance (800)

9 Dataview Displays Harmonic content displayed in bargraph form in real time using DataView for any or all inputs. Harmonic content information can be displayed in a text format for all harmonics out to the 30th. Technical Assistance (800)

10 Construction 3 Voltage Inputs 3 Hardwired Current Inputs LED Indicators ON/OFF Button Model SDL V301 USB2 Port ON/OFF Button Model SDL A301 LED Indicators USB2 Port Power Input (Models SDL A303 and SDL A304 only) 4 Voltage Inputs 24" Flexible Probes ON/OFF Button LED Indicators USB2 Port 4 Inputs for Iron Core Current Probes Power Input LED Indicators Model SDL V401 ON/OFF Button USB2 Port 4 Inputs for Flexible Current Probes Power Input Model SDL A402 ON/OFF button LED Indicators USB2 Port Power Input Model SDL A V US wall charger is included with Models SDL V401, SDL A303, SDL A304, SDL A401 and SDL A402 24" Flexible Probes (sold separately) USB cable is included with all Sentinel Data Loggers 10 Technical Assistance (800)

11 Accessories AEMC AmpFlex Sensors Compatible with Model SDL A401 Probe Measurement Range Sensor Length Maximum Conductor Output Catalog Model AC Inches (mm) Size Inches (mm) Connection No. SDL Lead/ A 5 to 1000A 24" (610mm) 8" (190mm) SDL A 5 to 1000A 36" (910mm) 11" (290mm) Lead/ SDL A 15 to 3000A 24" (610mm) 8" (190mm) Lead/ SDL A 15 to 3000A 36" (910mm) 11" (290mm) Lead/ AEMC Current Probes Compatible with Model SDL A402 Probe Measurement Range Output Signal Maximum Conductor Size Output Catalog AC DC Voltage ø Cable Bus Bar Connection No. 1mA to 10A 1mVac/mAac MN103* Lead to 100A 1mVac/Aac 0.47" (12mm) N/A MN114* 1mA to 10A 100mVac/Aac Lead MN251* 0.1 to 240A 1mVac/Aac Lead MN307* 10mA to 12A 100mV/Aac Lead " (20mm) N/A MN375* 0.1 to 10A 100mV/Aac Lead SL201* 50mA to 1.5A 50mA to 2A 1mV/mAac/dc 500mA to 120A 500mA to 150A 1mV/Aac/dc Lead SL206* 10mA to 1.5A 10mA to 2A 1mV/mAac/dc 50mA to 60A 50mA to 80A 10mV/Aac/dc 0.46" (12mm) N/A Lead SL mA to 10A 100mA to 10A 100mV/Aac/dc 1 to 100A 1 to 100A 10mV/Aac/dc Lead w/ MD301* 2 to 500A 1mVdc/Aac Lead " (30mm) 2.48 x 0.20" 2 x 500MCM (63 x 5mm) MD314* 4 to 500A 1mVac/Aac Lead SR652* 0.1 to 1000A 1mVac/Aac Lead SR752* 0.1 to 1000A 1mVac/Aac Lead " (52mm) 1.96 x 0.19" 1mA to 1A 1000mVac/Aac (50 x 5mm) 10mA to 10A 100mVac/Aac SR759* Lead to 100A 10mVac/Aac 1 to 1000A 1mVac/Aac MR to 40A 0.4 to 60A 10mV/Aac/dc One 1.18" (30mm) Two 1.2 x 0.4" 0.5 to 400A 0.5 to 600A 1mV/Aac/dc Two 0.95" (24mm) (31.5 x 10mm) 2 x 500MCM Lead w/ MR561 Consult AEMC Instruments for other probe selections. Note: Leads are attached and not shown in above Current Probe images. Output Terminations Lead with : Insulated 6.5 ft (2m) coaxial cable with insulated connector rated 600Vrms 0.2 to 100A 0.4 to 150A 10mV/Aac/dc One 1.5" (39mm) One 1.96 x 0.49" 0.5 to 1000A 0.5 to 1500A 1mV/Aac/dc Two 0.98" (25mm) (50 x 12.5mm) Two 1.96 x 0.19" (50 x 5mm) Lead: Double/reinforced 5 ft (1.5m) lead with safety 4mm banana plug *Requires Banana Plug (female) to (male) to connect the probe to the logger (below). Catalog # Lead w/ Technical Assistance (800)

12 Comparison Chart MODEL SDL V301 SDL V401 SDL A301 SDL A302 SDL A303 SDL A304 SDL A401 SDL A402 Input Type AC/DC Volts AC/DC Volts AC Amps AC Amps AC Amps AC Amps AC Amps AC/DC Amps AC Range 0 to 600Vac 0 to 600Vac 5 to 1000A 15 to 3000A 5 to 1000A 15 to 3000A 5 to 1000A or Probe 15 to 3000A, dependent sensor dependent DC Range 0 to 850Vdc 0 to 850Vdc Probe dependent Resolution 0.1V 0.1V 0.1A 0.25A 0.1A 0.25A 0.25A Probe dependent Input Termination Recessed Recessed Hard-wired Hard-wired Hard-wired Hard-wired banana jacks banana jacks flexible CTs flexible CTs flexible CTs flexible CTs No. of Inputs Three Four Three Three Three Three Four Four Sample Rate 64 samples/cycle 64 samples/cycle 64 samples/cycle 64 samples/cycle 64 samples/cycle 64 samples/cycle 64 samples/cycle 64 samples/cycle Memory Capacity (1MB) 480,000 (1MB) 480,000 (1MB) 480,000 (1MB) 480,000 (1MB) 480,000 (1MB) 480,000 (1MB) 480,000 (1MB) 480,000 measurements measurements measurements measurements measurements measurements measurements measurements Power Source Alkaline batteries AC power/ Alkaline batteries Alkaline batteries AC power/ AC power/ AC power/ AC power/ NiMH batteries NiMH batteries NiMH batteries NiMH batteries NiMH batteries Battery Life 100 hours Power ride 100 hours 100 hours Power ride Power ride Power ride Power ride to 90 days through 10 hours to 45 days to 45 days through 10 hours through 10 hours through 10 hours through 10 hours What s Six color-coded Eight color-coded Three hard-wired Three hard-wired Three hard-wired Three hard-wired DataView DataView Included leads, leads, flexible CTs, flexible CTs, flexible CTs, flexible CTs, software, software, DataView DataView DataView DataView DataView DataView batteries, batteries, software, software, software, software, software, software, 120V wall charger, 120V wall charger, batteries, batteries, batteries, batteries, batteries, batteries, user manual user manual user manual 120V wall charger, user manual user manual 120V wall charger, 120V wall charger, user manual user manual user manual ORDERING INFORMATION CATALOG NO. Sentinel Voltage Logger Model SDL V301 (3-Channel, 600Vac, three color-coded leads and alligator clips, four C-cell batteries)...cat. # Sentinel Voltage Logger Model SDL V401 (4-Channel, 600Vac, four color-coded leads and alligator clips, rechargeable NiMH batteries, 120V US wall charger)...cat. # Sentinel Current Logger Model SDL A301 (3-Channel, 1000Aac, 24" AmpFlex attached, four C-cell batteries)...cat. # Sentinel Current Logger Model SDL A302 (3-Channel, 3000Aac, 24" AmpFlex attached, four C-cell batteries)...cat. # Sentinel Current Logger Model SDL A303 (3-Channel, 1000Aac, 24" AmpFlex attached, rechargeable NiMH batteries, 120V US wall charger)...cat. # Sentinel Current Logger Model SDL A304 (3-Channel, 3000Aac, 24" AmpFlex attached, rechargeable NiMH batteries, 120V US wall charger)...cat. # Sentinel Current Logger Model SDL A401 (4-Channel, for use with AmpFlex sensors with Output, rechargeable NiMH batteries, 120V US wall charger) (Sensor not included)...cat. # Sentinel Current Logger Model SDL A402 (4-Channel, for use with Iron Core 1V current probes with Output, rechargeable NiMH batteries, 120V US wall charger) (Current probes not included)... Cat. # Sentinel Current Logger Model SDL A401 Kit (4-Channel, three 1000A 24" AmpFlex with Output, rechargeable NiMH batteries, 120V US wall charger, carrying bag)...cat. # Sentinel Current Logger Model SDL A401 Kit (4-Channel, four 1000A 24" AmpFlex with Output, rechargeable NiMH batteries, 120V US wall charger, carrying bag)...cat. # Sentinel Current Logger Model SDL A401 Kit (4-Channel, three 3000A 36" AmpFlex with Output, rechargeable NiMH batteries, 120V US wall charger, carrying bag)... Cat. # Sentinel Current Logger Model SDL A401 Kit (4-Channel, four 3000A 36" AmpFlex with Output, rechargeable NiMH batteries, 120V US wall charger, carrying bag)... Cat. # Accessories (Optional) Set of one black and one red leads with alligator clips...cat. # Banana (Female) (Male) Adapter (XM-BB)...Cat. # Bag Large Classic Tool Bag Cat. # AmpFlex Model SDL 1000A 24" with for use with Model SDL A401...Cat. # AmpFlex Model SDL 1000A 36" with for use with Model SDL A401...Cat. # AmpFlex Model SDL 3000A 24" with for use with Model SDL A401...Cat. # AmpFlex Model SDL 3000A 36" with for use with Model SDL A401...Cat. # Call the AEMC Instruments Technical Assistance Hotline for immediate consultation with an applications engineer: (800) Export Department: (978) Fax (978) export@aemc.com Chauvin Arnoux, Inc. d.b.a AEMC Instruments 200 Foxborough Blvd. Foxborough, MA USA (800) (508) Fax (508) Visit our website at BR-SENTINEL 03/08 Rev. 03 Printed in the USA