LED OUTDOOR Lighting Guide

Transcription

1 LED OUTDOOR Lighting Guide 1

2 LED OUTDOOR Lighting Guide Table of Contents Wallpacks... 3 Canopies... 9 Flood Lights Garage Lights Area Lights Roadway Lighting

3 Medium Wall Pack - LED Features Construction o o o o One-piece die-cast aluminum housing and hinged, removable die-cast aluminum door One-piece silicone gasket seals the optical chamber Housing has a textured bronze finish Borosilicate molded glass lens Specification Sheet o 1/2 conduit access, sides, top, or rear knockouts Photocell adaptable and UL listed for wet locations LED driver and electrical components are mounted to the diecast housing for optimal heat sinking and operating efficiency UL recognized integral LED electronic driver is Class 2 rated for V, 50/60Hz High output LEDs provide 80+ CRI in 5000 K CCT The LED system delivers, on average, 70% of lumen maintenance (L70) at 60,000 hours Suitable for ambient temperature up to 55 C (131 F) 5 Year warranty Date: MWP Classic look - modern performance Ordering Information Sample Model: MWP-5040R-LED-MV Series Color Configuration MWP 50 40R-LED-MV MWP- 50: 5000K Factory Installed Options (y) 28R-LED-MV 2,360 Lumens, 22W (blank): No FIO 40R-LED-MV 4,660 Lumens, 41W 55R-LED-MV 5,490 Lumens, 51W Note: Order with (-M) for title 24 compliance in CA Cross Reference Chart -M: Microwave Motion Sensor Comparable to HID LED Replacement Energy Savings Source Input Watts 1 Model # Input Watts Percentage 150W 185 MWP-5055R-LED-MV 51 72% 100W 129 MWP-5040R-LED-MV 41 68% 70W 91 MWP-5028R-LED-MV 22 76% 1 120V on Quad Tap Ballast Applications Ideal for parking facilities, entry ways, perimeter/pathway lighting for underpasses. Dimensions LED Product Partner Proudly Assembled IN THE USA* Online Resources Catalog # LCPCMV Accessories (sold separately) Description LED compatible external stem & swivel mount electronic photocontrol 2 2 Please use LED compatible electronic components to maintain warranty. 3 *Foreign and domestic components. Page 1 of 2 Rev: 8/24/2018

4 Specification Sheet MWP Photometric Details (Data shown for MWP-5055R model at 12ft. mounting height) Performance - Lighting Facts 4 Page 2 of 2 Rev: 8/24/2018

5 Large Wall Pack - LED Features Specification Sheet Construction o One-piece die-cast aluminum housing and hinged, removable die-cast aluminum door o One-piece silicone gasket seals the optical chamber o Housing has a textured bronze finish o Borosilicate molded glass lens o 1/2 conduit access, sides, top, or rear knockouts Photocell adaptable and UL listed for wet locations LED driver and electrical components are mounted to the diecast housing for optimal heat sinking and operating efficiency UL recognized integral LED electronic driver is Class 2 rated for V, 50/60Hz LEDs provide 80+ CRI in warm, neutral, and cool white colors 0-10V standard dimming capability The LED system delivers, on average, 70% of lumen maintenance (L70) at 100,000 hours Suitable for ambient temperature up to 55 C (131 F) for LWP- XX-55, LWP-XX-75 configurations and up to 45 C (113 F) for LWP-XX-90 configuration 5 Year warranty Date: LWP Classic look - modern performance Ordering Information Sample Model: LWP-5055-LED-MV Series Color Configuration LWP LED-MV LWP- 30: 3000K 40: 4000K 50: 5000K 55-LED-MV 6,600 Lumens, 53W 75-LED-MV 9,400 Lumens, 80W 90-LED-MV 12,000 Lumens, 95W Note: Order with (-M) for title 24 compliance in CA Cross Reference Chart Factory Installed Options (y) (blank): No FIO -M: Microwave Motion Sensor Comparable to HID LED Replacement Energy Savings Source Input Watts 1 Model # Input Watts Percentage 400W 464 LWP-5090-LED-MV 95 80% 250W 295 LWP-5075-LED-MV 80 73% 150W 185 LWP-5055-LED-MV 53 71% 1 120V on Quad Tap Ballast Applications Ideal for parking facilities, entry ways, perimeter/pathway lighting for underpasses. Dimensions Proudly Assembled IN THE USA* Online Resources Catalog # LCPCMV Accessories (sold separately) Description LED compatible external stem & swivel mount electronic photocontrol 2 2 Please use LED compatible electronic components to maintain warranty. 5 *Foreign and domestic components. Page 1 of 2 Rev: 8/24/2018

6 Specification Sheet LWP Photometric Details (Data shown for LWP-3075 model at a 12ft. mounting height) Performance - Lighting Facts 6 Page 2 of 2 Rev: 8/24/2018

7 Specification Sheet VL Series Versalite LED Wallpack 12, 30, 50, 80, and 120W ( V) Applications Wall Mount: Loading Docks Entrances Parking Areas Perimeter Flood Applications: Signage Building Façade Displays Security Lighting Underpasses Description Versalite VL Series Wallpack offers great energy savings compared to HID systems. It features a heavy-duty, spring-loaded hinge, which provides the flexibility of focusing light near the mounting surface (wallpack) or projecting light forward (flood). Warranty and Listings culus listed for wet locations (-20 C to 40 C / -4 F to 104 F). ROHS compliant. P65 rated. Complies with FCC Part 15, class B. Complies with EN , surge immunity (1kV). 5-year warranty on all electronics and housing. Features Die-Cast Housing Bronze polyester powder coat finish 69,000 hours maintenance-free operation to L 70 * Wall mount for wallpacks Heavy-duty, spring-loaded hinge provides vertical adjustability of the luminaire housing up to 65º. Adjustability provides for a range of lighting effects from full-cutoff downlight to forward throw. Knurled notches securely retain rotated position even in demanding environments. Mounting Options * L 70 hours are IES TM calculated hours. Dimensions Ordering Information Model Watts (W) Lumens Lm/W CCT/ CRI Voltage D VL , VL , VL , VL , VL , K; CRI V L W H S IES Zip File Installation Instructions Models L (in.) W (in.) H (in.) S (in.) D (in.) VL VL305, VL405, VL VL805, VL1005, VL Page 1 of 1 Rev: 5/8/2018

8 Medium Full-Cutoff Wall Pack - LED MCWP-5040R-LED-MV Rapid ship model available for next day shipment Specification Sheet Features Construction o One-piece die-cast aluminum housing and hinged, removable die-cast aluminum door o One-piece silicone gasket seals the optical chamber o Housing has a textured bronze finish o 1/2 conduit access, sides, top, or rear knockouts Photocell adaptable and UL listed for wet locations LED driver and electrical components are mounted to the diecast housing for optimal heat sinking and operating efficiency UL recognized integral LED electronic driver is Class 2 rated for V, 50/60Hz High output LEDs provide 80+ CRI in 5000 K CCT Minimum starting temperature: -35 C The LED system delivers, on average, 70% of lumen maintenance (L70) at 75,000 hours Suitable for ambient temperature up to 55 C (131 F) 5 Year warranty Date: MCWP-LED Applications Ideal for parking facilities, entry ways, perimeter/pathway lighting for underpasses. Dimensions Ordering Information UPC Code Catalogue # Lumens Input Watts MCWP-5040R-LED-MV Cross Reference Chart Comparable to HID LED Replacement Energy Savings Source Input Watts 1 LED Output Lumens Input Watts Percentage 150W % W % 1 120V on Quad Tap Ballast Photometrics Proudly Assembled IN THE USA* Catalog # LCPCMV Accessories (sold separately) Description LED compatible external stem & swivel mount electronic photocontrol 2 2 Please use LED compatible electronic components to maintain warranty. 8 *Foreign and domestic components. Page 1 of 1 Rev: 8/24/2018

9 LCN LED Canopy LCN Series 38W: 3,500 Lumens Description LCN series LED Canopy is designed to replace 70W metal halide fixtures. The long LED life and great color rendering makes this fixture attractive for new or retrofit projects. Features Low copper die-cast aluminum housing Durable polyester powder coat finish L70 lifespan: 50,000+ hours LED s available in 5000K/CRI 80 3,500 Lumens Minimum starting temperature: -40 F Suitable for use up to 40 C (104 F) ambient temperatures Acrylic prismatic refractor lens Mounts flush to standard J-box, surface mount conduit, or 3/4 conduit entry on top for pendant mounting using NPT threaded pipe 1/2 conduit entries on two sides Maximum pendant length is 12 (supplied by others) Warranty: 5 years Listings: UL and cul Listed for wet locations. Specification Sheet Date: LCN Click Logo to see DLC Listing Applications Ideal for parking areas, underpasses, entrances, loading docks, walkways and recreation areas Benefits Energy Saving compared to HID systems Replaces 70W Metal Halide System Efficacy Up to 92 Lm/W Long LED Life System Tested and Approved by Howard Industries in Mendenhall, Mississippi. Compliant with safety and performance standards. Dimensions Ordering Information 10 UPC Code Model Lumens Input Wattage Lm/W CCT/ CRI Suggested HID Replacement DLC ID LCN4050MV 3,500 38W K/ 80 CRI 70W MH PJC1AY1U Model Family Power (W) CRI/CCT Input Volts LCN MV LCN 38 Watts 50: 5000K CRI 80 MV: V Installation Instructions IES Zip File 9 Page 1 of 1 Rev: 11/29/2018

10 T Series LED Canopy 45W and 80W ( V) Specification Sheet Applications Parking areas Entrances Walkways T Series Underpasses Loading docks Recreation areas Description T Series LED canopy light is an ideal solution for illuminating parking garages, canopies, and other applications requiring low-profile luminaire that can be surface or pendant-mounted. With a die cast aluminum housing and a polycarbonate lens, the fixture will stand up to many years of punishing environmental conditions. High-efficacy, long-life LEDs provide both energy and maintenance cost savings compared to traditional canopy lights with HID, fluorescent or incandescent lamps. Features Die cast aluminum housing with durable, dark bronze, powder coat paint. Lens: High light transmittance PC, anti-uv fire resistant. Long-life LEDs provide a minimum of 60,000 hours of operation with at least 70% of initial lumen output (L70). L70 hours are IES TM calculated hours. Driver: V 50-60Hz 0-10vdc dimming capability is standard. Power factor > 0.90, total harmonic distortion < 20%. Color rendering index > kV surge protector is standard. Removable, threaded plugs for side attachment of ½ rigid electrical conduit. Easy installation in new construction or retrofit. Warranty: 5 years Warranty & Listings culus listed for wet locations (-40 C to 40 C / -40 F to 104 F). IP65 rated. Complies with FCC Part 15, class B. 5-year warranty on all electronics and housing. Mounting Options Junction box mounting plate is standard. Luminaire can also be directly surface-mounted to canopies by removing the lens, drilling holes in the cast housing, and screwing the luminaire to the canopy. Threaded hole on back of luminaire for ¾ rigid electrical conduit also provides for pendant-mounting. Dimensions L W H Click Logo to see DLC Listing Ordering Information Model Watts Lumens Lm/W Voltage DLC ID Length (L) Width (W) Height (H) Weight LSCT45DMV PLDVLHK72E2O /8 5.6 lbs V LMCT95DMV PLFW0K3UL50H lbs. 10 Page 1 of 2 Rev: 11/29/2018

11 Specification Sheet T Series Electrical Model CCT CRI 1 Lumens Watts Lm/W Input Input Current (A) Power Voltage 2 120V 240V 277V Factor THD 3 L 70 Hours 4 LSCT45DMV 4, , K > > 90% < 20% LMCT95DMV 9, ,000 1 Color rendering index. 2 All 50-60Hz. 3 Total harmonic distortion. 4 L 70 refers to the number of hours at which lumen output declines to 70% of the initial level. L 70 hours are IES TM calculated hours. Photometric Data LSCT45DMV (4,948 Lumens) LMCT95DMV (9,548 Lumens) Notes: Isofootcandle plots depict initial footcandles at grade. With a mounting height of 15 feet. 11 Page 2 of 2 Rev: 11/29/2018

12 Specification Sheet FLL8 LED Flood Light Howard FLL8 Series 8W: 900 Lumens Features Energy Saving Comparable to 50W halogen using less energy. 50,000 hour LED lifespan for maintenance-free operation Heat dissipating fins for optimized thermal management. Date: Applications Ideal for security, accenting architecture, displays, and signs. Housing Low-copper, aluminum die-cast housing and lens frame. Heat dissipating fins for optimized thermal management. Durable polyester powder coat finish Bronze or white housing Lens/Refractor Tempered glass lens, thermal shock and impact resistant. LEDs/LED Driver 8W Color temp: Neutral White (4100K) CRI: 80 Min. Starting Temperature: -30 C 900 Lumen Output 50,000 Hour Life Input voltage: V 50/60 Hz Photometric Dimensions Mounting 1/2 NPS aluminum die-cast swivel arm fits to standard junction box (not included). Side screw at arm knuckles allows for optics aiming. Certifications UL/CUL Listed, suitable for Wet Locations Warranty 2-Year Warranty INTENSITY (cd) H V 6 4 Ordering Information UPC Code Model # Input Wattage Lumens Driver Voltage Housing Color FLL LED Bronze FLL8-W LED White Sample Ordering Information Howard FLL8 LED Flood Light 8W 900 Lumens 4100K volts 12 Page 1 of 1 Rev: 6/14/2017

13 Specification Sheet FLL23 LED Flood Light Howard FLL23 Series 23W: 2540 Lumens Date: Features Energy Saving Comparable to 100W halogen using less energy. 50,000 hour LED lifespan for maintenance-free operation Heat dissipating fins for optimized thermal management. Applications Ideal for security, accenting architecture, displays, and signs. Housing Low-copper, aluminum die-cast housing and lens frame. Heat dissipating fins for optimized thermal management. Durable polyester powder coat finish Bronze or white housing Lens/Refractor Tempered glass lens, thermal shock and impact resistant. LEDs/LED Driver 23W Color temp: Neutral White (4100K) CRI: 80 Min. Starting Temperature: -30 C 2540 Lumen Output 50,000 Hour Life Driver: 700 ma output, constant current supply Input voltage: V 50/60 Hz Dimensions Mounting 1/2 NPS aluminum die-cast swivel arm fits to standard junction box. Side bolt at arm knuckles allows for optics aiming. Photometric Certifications UL/CUL Listed, suitable for Wet Locations Warranty 2-Year Warranty INTENSITY (cd) H V Ordering Information UPC Code Model # Input Wattage Lumens Driver Voltage Housing Color FLL LED Bronze FLL23-W LED White Sample Ordering Information Howard FLL23 LED Flood Light 23W 2540 Lumens 4100K volts 13 Page 1 of 1 Rev: 6/14/2017

14 LED Flood Light Howard FLL32 Series 32W: 3700 Lumens Specification Sheet Date: FLL32 Features Energy Saving Comparable to 250W halogen using less energy. 50,000 hour LED lifespan for maintenance-free operation Heat dissipating fins for optimized thermal management. Applications Ideal for security, accenting architecture, displays, and signs. Housing Low-copper, aluminum die-cast housing and lens frame. Heat dissipating fins for optimized thermal management. Durable polyester powder coat finish Bronze or white housing Lens/Refractor Tempered glass lens, thermal shock and impact resistant. LEDs/LED Driver 32W Color temp: Neutral White (4100K) CRI: 80 Min. Starting Temperature: -30 C 3700 Lumen Output 50,000 Hour Life Driver: 700 ma output, constant current supply Input voltage: V 50/60 Hz 7.5 Dimensions 5 6 Mounting 1/2 NPS aluminum die-cast swivel arm fits to standard junction box. Side bolt at arm knuckles allows for optics aiming. Photometric Certifications UL/CUL Listed, suitable for Wet Locations Warranty 2-Year Warranty Ordering Information UPC Code Model # Input Wattage Lumens Driver Voltage Housing Color FLL LED Bronze FLL32-W LED White INTENSITY (cd) 15 0 H V Sample Ordering Information Howard FLL32 LED Flood Light 32W 3700 Lumens 4100K volts Page 1 of 1 Rev: 6/14/2017

15 LED Flood Light Howard BLED Series 45W: 5590 Lumens 72W: 8475 Lumens Lens/Refractor Tempered glass lens, thermal shock and impact resistant. Housing Low-copper, aluminum die-cast housing and lens frame. Dark bronze polyester powder-coat finish. Specification Sheet Date: BLED Certifications UL/CUL Listed, suitable for Wet Locations Warranty 5-Year Warranty Applications Ideal for flag pole lighting, building facades, security, architectural landscaping, highlighting signs & displays. 1/2 Swivel Arm 2 Slip Fitter (Only for 72W model) Product Information Model Watts Lumens Color/CRI Mount HID Equivalent BLED-B /2 Swivel 100W HID 4000K BLED-D-4 1/2 Swivel 150W HID CRI BLED-D-4-SF 2 Slipfitter 150W HID Sample Ordering Information Howard BLED-D-4 LED Flood Light 150W HID Equivalent 72W 8475 Lumens volts 1/2 Swivel Mount Dimensions BLED-B-4 BLED-D-4 BLED-D-4-SF 4.4 lbs. 7.3 lbs. 9.2 lbs. 15 Page 1 of 2 Rev: 10/25/2017

16 Specification Sheet SLF-LED Small LED Flood SLF Series 46W: 4,520 Lumens Features Energy Saving Comparable to 100W HID using less energy. 50,000+ hour LED lifespan for maintenance-free operation Date: Specifications: Housing Aluminum die-cast housing and lens frame. Durable polyester powder coat finish Bronze housing Lens Tempered glass lens, thermal shock and impact resistant. LED 46 Watts 4,520 Lumen Output 98 Lm/W Color temp: 4000K CRI: 80+ L70 Lifespan: 50,000+ hours Min. Starting Temperature: -30 Input voltage: V 50/60 Hz Mounting 1/2 NPS aluminum die-cast swivel arm fits to standard junction box. Side bolt at arm knuckles allows for optics aiming. Applications Ideal for security, building facades, displays and signs Dimensions 9 Certifications UL/cUL Listed; suitable for wet locations UPC Code Model Input Wattage Lumens Driver Voltage SLF MV 46 4,520 LED Sample Ordering Number: Howard SLF MV Small LED Floodlight 46W (4520 Lumens) 4000K volts 7 Photometric Data Luminous Intensity Plot (cd) 6 Iso-candela Plot (cd) IES Installation Instructions Zip File 16 Page 1 of 1 Rev: 5/25/2017

17 GL Series LED Garage Light Series Specification Sheet Description GL Series LED garage light is an ideal solution for illuminating parking garages, canopies, and other applications requiring lowprofile luminaire that can be surface or pendant-mounted. With a die cast aluminum housing and a polycarbonate lens, the fixture will stand up to many years of punishing environmental conditions. Highefficacy, long-life LEDs provide both energy and maintenance cost savings compared to traditional canopy lights with HID, fluorescent or incandescent lamps. Features Long-life LEDs provide a minimum of 65,000 hours of operation with at least 90% of initial lumen output (L 90 ). L90 hours are IES TM calculated hours. Die cast aluminum housing with durable, white, powder coat paint. Lens: High light transmittance PC, anti-uv fire resistant. Color Temperature: 4000K (neutral white) standard, call factory for other color options. Driver: V, 50/60Hz 1-10vdc dimming capability is standard. Power factor > 0.90, total harmonic distortion < 20%. Color rendering index > 80. Removable, threaded plugs for side attachment of ½ rigid electrical conduit. Integral dimming occupancy sensor. Easy installation in new construction or retrofit. Warranty: 5 years Ordering Information Model Configuration CCT Voltage Housing Color Controls GL 40K MV W S GL (Garage Light) DLC ID: A: 41W, 5240 lm 40K: B: 62W, 7670 lm 4000K GL-A-40K-MV-*-S: PLQZSRZDW2R8 GL-B-40K-MV-*-S: PLHHQWBYNME0 MV: VAC Click Logo to see DLC Listing W: White 17 Date: S: Integral Dimming Occupancy Sensor Applications Parking Areas Entrances Walkways Photometrics 4.5 GL Series Underpasses Loading Docks Recreation Areas Warranty & Listings culus listed for wet locations (-40 C to 40 C / -40 F to 104 F). IP65 rated. 5-year warranty on all electronics and housing. Polar Candela Distribution Mounting Options Junction box mounting plate is standard. Luminaire can also be directly surface-mounted to canopies by removing the lens, drilling holes in the cast housing, and screwing the luminaire to the canopy. Threaded hole on back of luminaire for ¾ rigid electrical conduit also provides for pendant-mounting. Dimensions threaded 1/2 conduit plugs Threaded hole for 3/4 pendant installation Diameter: 11.4 Page 1 of 2 Rev: 11/29/2018

18 Specification Sheet GL Series Factory Set Occupancy Sensor Settings Sensor Setup* Sensor set-up 1. Remove the lens 2. Adjust DIP switches with appropriate tool as needed 3. Replace the lens and check the function of sensor *The sensor can be disabled by moving 3, 4 & 5 switches to off position. 18 Page 2 of 2 Rev: 11/29/2018

19 LED Flood Light XALE Series Features LED: Lumileds Color Temperature: 5000K (cool white), other colors available Color Rendering Index (CRI): > 70 Long LED life; L 70 > 150,000 hours* Rated for Ambient Temperatures between -40 C/- 40 F to 40 C/104 F Power Factor (PF) > 0.9 Total Harmonic Distribution (THD) < 20% Surge protection: 6kV Input Voltage: MV: V; 50/60 Hz Input Voltage: HV: V; 50/60 Hz Dimmable: 0-10Vdc Distribution: Type III standard, other types available Ultra-durable Powder Coat Paint Standard Color Bronze UL/cUL Listed IP65 Warranty: 5 years *L 70 hours are IES TM calculated hours. Mounting Options 6.5 long mounting arm is included with the fixture for square pole mounting Slip Fitter (XLE-SF), accessory, can be used to attach 3 fixture to a 2 OD tenon. 8 A round pole adapter (XAL-RPA), accessory, can be used to mount this fixture on round poles, up to 5 diameter. Dimensions Specification Sheet XALE Applications Security Outdoor Lighting Hotels Warehouses Parking Lots Street Lights Parks Model Length (in) Width (in) Height (in) Mounting Arm (in) Effective Projected Area EPA (sf) Weight (lbs) XALE Length: XALE Depth: 3 XALE Height: XALE Ordering Information Model CCT 1 Nominal Input Power Input Voltage 2 Light Distribution 3 Driver Identifier (not configurable) Housing Color 4 Comparable to HID XALE LED Flood Light K 100: 97W, 13,475 Lm 320W MV T: Towin 150: 150W, 20,680 Lm T3 (blank) 400W V 230: 227W, 31,312 Lm Type 3 Bronze 50/60 Hz 750W I: Inventronics 300: 293W, 40,718 Lm 1000W Call factory for lead times (12-16 weeks typical & MOQ 50 pcs.) on non-stocked options; 1 CCT - 3(3000K), 4(4000K); 2 Input Voltage HV( V, 50/60Hz) -Meanwell; 3 Light Distribution T2(Type 2), T3(Type 3), T4(Type 4); 4 Housing Color BK(Black), GY(Gray), WH(White) 19 Page 1 of 2 Rev: 9/11/2018

20 Specification Sheet XALE LED Flood Light XALE Series Accessories XLE-SF: Slip Fitter XLE-TR: Trunnion (100/150/230W models) XLE-TRL: Trunnion (300W model) XAL-RPA: Round Pole Adapter Mounting Hole Guide XALE with standard ARM Trunnion Details For 100, 150, & 230W w/ trunnion (XLE-TR) For 300W w/ trunnion (XLE-TRL) HV Series Performance Details (w/ T3 optic): Output Lumens Input Power Efficacy Comparable to CCT (W) LPW XALE-*100 HV Series 14, W XALE-*150 HV Series 21, W XALE-*230 HV Series 32, W XALE-*300 HV Series 41, W Where * represents CCT: 4=4000K, 5=5000K Note: HV Series are non-stocked, there is a typical weeks lead time & MOQ 50 pcs. 20 Page 2 of 2 Rev: 9/11/2018

21 LED Flood Light XFLE Series Features LED: Lumileds Color Temperature: 5000K (cool white), other colors available Color Rendering Index (CRI): > 70 Long LED life; L 70 > 150,000 hours* Rated for Ambient Temperatures between -40 C/- 40 F to 40 C/104 F Power Factor (PF) > 0.9 Total Harmonic Distribution (THD) < 20% Surge protection: 6kV Input Voltage: MV: V; 50/60 Hz Input Voltage: HV: V; 50/60 Hz Dimmable: 0-10Vdc Photocell and motion sensors are optional Beam Angle: 90 x120 (NEMA 7Hx6V) Ultra-durable Powder Coat Paint Standard Color Bronze UL/cUL Listed IP65 Warranty: 5 years *L 70 hours are IES TM calculated hours. Mounting Options Slip Fitter (XLE-SF), accessory, can be used to attach 3 fixture to a 2 OD tenon. 8 A mount arm (XLE-ARM), accessory, can be used to attach fixture on a square pole. Dimensions Specification Sheet XFLE Applications Security Building Facades Displays Signs Model Length (in) Width (in) Height (in) Trunnion (in) Effective Projected Area EPA (sf) Weight (lbs) XFLE Length: XFLE Depth: Height: 2.0 XFLE XFLE Ordering Information 1 2 Length: 5.7 Depth: 8.3 Height: Model CCT 1 Nominal Input Power Input Voltage 2 Mounting Light Distribution 3 Driver Identifier (not configurable) Housing Color 4 Comparable to HID XFLE LED Flood Light K 100: 97W, 13,494 Lm 320W MV TR F1 T: Towin 150: 150W, 20,680 Lm (blank) 400W V Trunnion NEMA 230: 227W, 31,312 Lm Bronze 50/60 Hz Standard 7Hx6V 750W I: Inventronics 300: 293W, 40,718 Lm 1000W Call factory for lead times (12-16 weeks typical & MOQ 50 pcs.) on non-stocked options; 1 CCT - 3(3000K), 4(4000K); 2 Input Voltage HV( V, 50/60Hz) -Meanwell; 3 Light Distribution T2(Type 2), T3(Type 3), T4(Type 4); 4 Housing Color BK(Black), GY(Gray), WH(White) 21 Page 1 of 2 Rev: 9/11/2018

22 Specification Sheet XFLE LED Flood Light XFLE Series Accessories XLE-SF: Slip Fitter XLE-ARM: Mount Arm XAL-RPA: Round Pole Adapter Mounting Details (inches): For 100, 150, & 230W luminaires For 300W luminaire Performance Details (w/ F1 optic): Output Lumens Input Power Efficacy Comparable to CCT (W) LPW XFLE-*100 HV Series 14, W XFLE-*150 HV Series 21, W XFLE-*230 HV Series 32, W XFLE-*300 HV Series 41, W Where * represents CCT: 4=4000K, 5=5000K Note: HV Series are non-stocked, there is a typical weeks lead time & MOQ 50 pcs. 22 Page 2 of 2 Rev: 9/11/2018

23 LED Area Light XAL Series Features LED: Lumileds Color Temperature: 5000K (cool white) Color Rendering Index (CRI): > 80 Long LED life; L 70 > 60,000 hours. L 70 hours are IES TM calculated hours. Rated for Ambient Temperatures up to 40 C/104 F Power Factor (PF) > 0.9 Total Harmonic Distribution (THD) < 20% Input Voltage: V; 50/60 Hz Dimmable: 0-10Vdc Distribution: Type III Ultra-durable Powder Coat Paint Standard Color Bronze UL/cUL Listed IP65 Warranty: 5 years Specification Sheet XAL Applications Security Outdoor Lighting Hotels Warehouses Parking Lots Street Lights Parks Options 6 long mounting arm pre-installed for square pole mounting Slip Fitter (XFL-SF), accessory, can be used to attach fixture to a OD tenon (2-inch pipe). A round pole adapter (XAL-RPA) accessory, can be used to mount this fixture on round poles, up to 5 diameter. Dimensions Model A B C D E F XAL-5080 XAL-5100 XAL XAL Visit for the Qualified Products List Effective Projected Area (sf) Top 1.24 Side 0.50 Front 0.49 Top 1.99 Side 0.66 Front 0.51 Weight 12.8 lbs 25.0 lbs All dimensions in inches XAL Series LED Area Light Model CCT Input Power Lumen Output Efficacy Voltage Mounting Comparable to HID XAL-5080-LED-MV 5000K 78W 9, LPW V Arm 200W XAL-5100-LED-MV K 99W 12, LPW V Arm 320W XAL-5150-LED-MV K 157W 18, LPW V Arm 400W XAL-5220-LED-MV K 227W 27, LPW V Arm 750W 1 Limited quantities available 23 Page 1 of 2 Rev: 1/17/2019

24 LED Area Light XAL Series Photometrics Specification Sheet XAL Accessories (Sold Separately) XFL-SF: Slip Fitter OD tenon (2-inch pipe). Compatible with all XAL & XFL-TR Models. XAL-TR: Trunnion XAL-RPA: Round Pole Adapter Can be used to mount this fixture on round poles, up to 5 diameter. XHGS-L: Half Glare Shield (220W) 24 Page 2 of 2 Rev: 1/17/2019

25 LED Flood Light XFL Series Features LED: Lumileds Color Temperature: 5000K (cool white) Color Rendering Index (CRI): > 80 Long LED life; L 70 > 60,000 hours. L 70 hours are IES TM calculated hours. Rated for Ambient Temperatures up to 40 C/104 F Power Factor (PF) > 0.9 Total Harmonic Distribution (THD) < 20% Input Voltage: V; 50/60 Hz Dimmable: 0-10Vdc Beam Angle: 90 x120 (NEMA 7x7) Ultra-durable Powder Coat Paint Standard Color Bronze UL/cUL Listed IP65 Warranty: 5 years Specification Sheet XFL Applications Security Building Facades Displays Signs XFL-5080-LED-MV-TR XFL-5220-LED-MV Mounting Options -TR in model configuration for trunnion. Slip Fitter (XFL-SF) can be used to attach fixture to a OD tenon (2-inch pipe). Fits -TR models only. Visit for the Qualified Products List Dimensions Model A B C D E XFL XFL All dimensions in inches Effective Projected Area (sf) Top 1.04 Side 0.28 Front 0.36 Top 1.79 Side 0.39 Front 0.36 Weight 12.0 lbs 25.0 lbs XFL Series LED Flood Light Model CCT Input Power Lumen Output Efficacy Voltage Mounting Comparable to HID XFL-5080-LED-MV-TR 5000K 79W 10, LPW V Trunnion 200W XFL-5220-LED-MV K 229W 26, LPW V Yoke 750W 1 Limited quantities available 25 Page 1 of 2 Rev: 1/16/2019

26 LED Flood Light XFL Series Photometrics Specification Sheet XFL Polar Candela Distribution Center Beam Footcandle (fc) Beam Spread (ft.) Height 080 Series 220 Series Horizontal Vertical 4 Ft Ft Ft Ft Ft Beam Angle 124º 89º Accessories (Sold Separately) XFL-SF: Slip Fitter OD tenon (2-inch pipe). Compatible with XFL-TR & all XAL Models. XAL-ARM: 6 Long Mounting Arm. Fits -TR models only. XHGS-L: Half Glare Shield (220W) 26 Page 2 of 2 Rev: 1/16/2019

27 UF - LED UTILITY FLOOD LED Utility Flood Utility Flood LED Flood / Area Lighting The UF is an LED energy saving cost-effective solution to replace 250, 400 and 1000 watt HID (HPS & MH) flood lights. hi Features: The driver compartment is secured with thumbscrews for easy access to the driver, surge suppressor, and terminal block. The optical compartment is IP66 rated to prevent the ingress of water. An optional glare-shield is available. This flood has an optional Adjustable Output Unit (AOU) that allows the installer to a wide range of output settings to meet the required wattage, illuminance level, and lumens per watt. The AOU simplifies the installer s inventory and allows for customization to the jobsite needs. Construction: Heavy duty die-cast aluminum housing Corrosion resistant (stainless steel) hardware Thumb-screw entry Three (3) station terminal block 14 to 6 AWG Wrap-around yoke standard or optional slip-fitter IP66 rated optical chamber Self cleaning heat sink Optical: IP66 rated optics enclosure Glass lens Standard 4000K (optional 3000K) 70 CRI Type 7x6 NEMA distribution Optional visor shield Performance Ratings: Electrical: Input Wattage 270W Lumen Output 30000Lm Driver power factor is 90% minimum Driver maximum THD of 20% Driver voltage v (50/60Hz), non-dimming standard with 3 pin photo control receptacle 0-10v dimming driver is standard with 7 pin photo control receptacle Electronic driver has an expected life of 100,000 hours at 25C ambient. Standard NEMA 3-pin twist lock photo control receptacle Optional NEMA 7-pin twist lock photo control receptacle Standard with 10kV/10kA surge protection (meets or exceeds ANSI/IEEEC62.41) Suitable for ambient temperatures from -40C to +45C 86% lumen maintenance greater than 36,000 hours per IESNA TM-21 Certification Ratings: UL, cul listed, suitable for wet locations IP66 fixture and optical enclosure (per ANSI C ) LM79/LM80 testing RoHS compliant Warranty: 5 year standard warranty Options: 20kV/20kA surge protector Long-Life photocontrol Slip-fitter mount with internal wiring or external cord Visor shield

28 28

29 掀瞰 Specification Sheet 6/7/2015 Dusk-to-Dawn Commercial DTDC High Output LED Series 30W: 2370 Lumens DTDC-HO-LED Series LED Fixture Features High-powered, energy efficient chip on board LED Replaces exiting HID fixtures up to 100 watts Quiet operation, no audible hum or noise Easy Installation Hardware Included Applications Provides excellent security lighting for residential areas, storage facilities, loading areas, or rural roadways. Specifications Housing Heavy-duty, die-cast aluminum housing Small, lightweight design Gray UV resistant powder coat finish Lens/Refractor Injection molded acrylic prismatic lens with UV resistance Silicone rubber gasket for superior moisture resistance LEDs/LED Driver Energy Efficiency, High Powered LED: 30 Input Watts 4000K, >80CRI 2,370 Delivered Lumens 50,000 hour life at L70 80 Lumens per watt (LPW) efficacy Operating Temperature: -25 C (-13 F) to 35 C (95 F) High quality, power factor corrected LED driver Low Tj for long-life LEDs Low lumen depreciation Electronic Class 2 LED Driver Input voltage: 120V 50/60 Hz DIMENSIONS Optional arm (See Option A on ordering table) Installation Easy Installation Hardware Included Install direct-to-wall or use with mounting arm (optional) 5 12 Photocell Factory installed photocontrol (120V) MOUNTING ARM 1-5/8 dia. Warranty 5-Year Warranty PHOTOMETRIC UPC Code Model # Input Wattage Driver Voltage Options DTDC-30HO-LED LED DTDC-30HO-LED-120-A 30 LED 120 A: with 24 arm Sample Ordering Number: DTDC-30HO-LED-120 Dusk-to-Dawn Commercial With Acrylic Prismatic Refractor LED: 30 Input Watts 4000K, >80CRI 120 volts 2 1 Maximum Candela = 886 Located At Horizontal Angle = 0, Vertical Angle = 14 # 1 - Vertical Plane Through Horizontal Angles (0-180) (Through Max. Cd.) # 2 - Vertical Plane Through Horizontal Angles (90-270) LED Product Partner 29

30 Specification Sheet DTDU-LED Series 12/9/2016 LED Dusk-to-Dawn -Utility DTDU-LED Series LED: 35 or 48 Watts LED Fixture Specifications Housing Heavy-duty, die-cast aluminum housing Gray powder coat PEC receptacle Stainless steel latch springs Wire tether Lens UV-stabilized acrylic prismatic refractor Features High-powered LEDs 35W replaces existing 70W HID 48W replaces existing 100W HID Tool less entry Easy Installation Hardware Included Listings: UL and cul Listed for outdoor applications Luminaire complies with IESNA LM79 and LM80 standards Applications Provides excellent security lighting for residential areas, storage facilities, loading areas, or rural roadways. Installation/Mounting Install direct-to-wall or post Use with mounting arm (optional) Utility mounting arm: 1.25 diameter (1.625 O.D.) Mounting hardware included Requires a shorting cap or a photocell (sold separately) LEDs/LED Driver Energy LED: 35 Watts / 3,638 Lumens / 102 Lm/W 48 Watts / 4,411 Lumens / 92 Lm/W 4100K / 80 CRI 50,000 Hour Life Input voltage: v 50/60 Hz Operating Temperature -25 C(-13 F) - 35 C(95 F) Surge Protection 10kV surge protection (standard) Fixture must be grounded Photocell Long-life Photocell (optional) IES Classification Type 5 VS BUG Rating B1-U2-G1 Warranty 5-Year Warranty Photometric Dimensions INTENSITY (cd) V 0.0deg H 0.0deg Visit designlights.org for a list of products. LED Product Partner Visit for a list of products. 30

31 31

32 32

33 L400 Series 09/09/2016 L401/L402 Models LED Street and Area Light The L400 Series captures the benefits of the latest in LED technology into a high performance, high efficacy, long-life luminaire. The outstanding photometric performance results in sites with excellent uniformity, greater pole spacing and lower power density. The L400 Series is the better alternative for traditional street and area lighting with quick payback and improved performance. Applications: Roadway, parking lots, walkways and general area spaces Warranty: Ten year limited warranty. 4.0 LED Street & Area Light L400 Series 18.0 EPA: 0.5 ft2 (0.05m2) Weight: 8.8 lbs (4.0 kgs) Ordering Information Model L401 Options Power Color Distribution Control Options 25W 30K: 3000 K 40K: 4000 K* T2: Type 2 T3: Type 3 T5: Type 5 10: 0-10V Dimming* L: No Photocontrol* LC: With Long Life Photocontrol L402 40W Finish GR: Grey* Input Voltage M: VAC* WH: White BL: Black BR: Brown 65W 80W *Standard Configuration 100W Standard Features: Standard 7-Pin Photocontrol Receptacle (per ANSI C136.41) Stand-alone 10KV/10KA Surge Suppression Device (consult factory for 20KV / 20KA option) Terminal block accepts 14-6 AWG conductors (Line, Neutral, Ground) (consult factory for 600V, 85A, 14 2AWG terminal block) Two Bolt Mounting accommodates 1 ¼" NPS to 2" NPS horizontal tenon (pre-configured for 2 NPS) Integral Tilt-adjustment Steps ±5 Bird-guard Tool-Less Entry Input Voltage: V, 50/60Hz Power Factor : > 0.9 at full load and Total Harmonic Distortion: < 20% at full load Ambient Operating Temperatures -40 C to +50 C

34 L400 Series LED Street & Area Light 07/26/2016 L400 Series L401/L402 Models LED Street and Area Light Lumen Output: Lumen values are from photometric tests performed in accordance with IESNA LM Data are considered to be representative of the configurations shown, within the tolerances allowed by Lighting Facts. Actual performance may differ as a result of end user environment and application. Actual wattage may differ by +/- 10%. Contact factory for performance data on any configurations not shown here. Model L401L Model L401L Electrical Data: LEDs LED Drive Current System Watts Operating Current (A) 120V 208V 240V 277V mA 25W L402L 28 LEDs 16 L402L 28 LED Current A 0.75A 1.15A 0.7A 1.0A System Watts 25W 40W 65W 80W 100W 750mA 40W mA 65W mA 80W mA 100W Performance Data 30K (3000K, 70CRI) 40K (4000K, 70CRI) Dist Type Lumens B U G LPW Lumens B U G LPW T T T T T T T T T T T T T T T Lumen Ambient Temperature (LAT) Multipliers: Ambient Lumen Multiplier 0 C 32 F C 50 F C 68 F C 77 F C 86 F C 104 F 0.99 Certifications: culus Listed Suitable for wet locations Certified to ANSI C , 3G vibration standards. Surge suppression protection tested in accordance with IEEE/ANSI C Precision molded optical assembly tested to IP65 Meets FCC Part 15 standards for conducted and radiated emissions Luminaire finish tested to withstand 3,000 hours (per ASTM Standard B 117) RoHS compliant. Consult factory for additional details Luminaire Lumen Maintenance Factors (LMF) Data references the extrapolated performance projections for the platforms noted in a25 C ambient, based on 10,000 hours of LED testing (tested per IESNA LM and projected per IESNA TM-21-11). To calculate LLF, use the lumen maintenance factor that corresponds to the desired number of operating hours below. For other lumen maintenance values, contact factory. Operating Hours Lumen Maintenance Factor L401L 10 LEDs 0.7A L402L 28 LEDs 1.0A

35 L400 Series LED Street & Area Light 09/09/2016 L400 Series L403/L404 Models LED Street and Area Light The L400 Series captures the benefits of the latest in LED technology into a high performance, high efficacy, long-life luminaire. The outstanding photometric performance results in sites with excellent uniformity, greater pole spacing and lower power density. The L400 Series is the better alternative for traditional street and area lighting with quick payback and improved performance. Applications: Roadway, parking lots, walkways and general area spaces. Warranty: Ten year limited warranty EPA: Weight: 0.8 ft 2 (0.08m 2 ) 14.5 lbs (6.5 kgs) Ordering Information Model Options Power Color Distribution Control Options Finish Input Voltage L403 L: No 120 W 30K: 3000 K T2: Type 2 10: 0-10V Dimming* GR: Grey* M: VAC* Photocontrol* 40K: 4000 K* T3: Type 3 WH: White H: VAC LC: With Long 180 W T4: Type 4 BL: Black Life Photocontrol BR: Brown T5: Type 5 L W *Standard Configuration 240 W Standard Features: Standard 7-Pin Photocontrol Receptacle (per ANSI C136.41) Stand-alone 10KV/10KA Surge Suppression Device (consult factory for 20KV / 20KA option) Terminal block accepts 14-6 AWG conductors (Line, Neutral, Ground) (consult factory for 600V, 85A, 14 2AWG terminal block) Four Bolt Mounting accommodates 1 ¼" NPS to 2" NPS horizontal tenon (pre-configured for 2 NPS) Integral Tilt-adjustment Steps ±5 Bird-guard Tool-Less Entry Input Voltage: V or V, 50/60Hz Power Factor : > 0.9 at full load and Total Harmonic Distortion: < 20% at full load Ambient Operating Temperatures -40 C to +50 C

36 LED Street & Area Light 07/26/2016 L400 Series L403/L404 Models LED Street and Area Light Performance Data Lumen Output: Lumen values are from photometric tests performed in accordance with IESNA LM Data are considered to be representative of the configurations shown, within the tolerances allowed by Lighting Facts. Actual performance may differ as a result of end user environment and application. Actual wattage may differ by +/- 10%. Contact factory for performance data on any configurations not shown here. Model L403L LEDs 48 L404L 64 LED Current 0.7A 1.0A 0.7A 1.0A System Watts 120W 180W 150W 240W 30K (3000K, 70CRI) 40K (4000K, 70CRI) Dist Type Lumens B U G LPW Lumens B U G LPW T T T T T T T T T T T T Electrical Data: Model LEDs L403L 48 L404L 64 LED Drive Current System Watts Operating Current (A) 120V 208V 240V 277V 347V 480V 700mA 120W mA 180W mA 150W mA 240W Lumen Ambient Temperature (LAT) Multipliers: Ambient Lumen Multiplier 0 C 32 F C 50 F C 68 F C 77 F C 86 F C 104 F 0.99 Certifications: culus Listed Suitable for wet locations Certified to ANSI C , 3G vibration standards. Surge suppression protection tested in accordance with IEEE/ANSI C Precision molded optical assembly tested to IP65 Meets FCC Part 15 standards for conducted and radiated emissions Luminaire finish tested to withstand 3,000 hours (per ASTM Standard B 117) RoHS compliant. Consult factory for additional details Luminaire Lumen Maintenance Factors (LMF) Data references the extrapolated performance projections for the platforms noted in a25 C ambient, based on 10,000 hours of LED testing (tested per IESNA LM and projected per IESNA TM-21-11). To calculate LLF, use the lumen maintenance factor that corresponds to the desired number of operating hours below. For other lumen maintenance values, contact factory. Operating Hours Lumen Maintenance Factor L403L 48 LEDs 0.7A L404L 64 LEDs 1.0A

37 SLS - Solar LED Streetlight Solar Lighting SLS Solar LED Streetlight SLS Series LED Solar Street Light is designed with an all-in-one streamlined design. High brightness LEDs combined with the long lifespan of the lithium iron phosphate battery make this a great lighting solution for applications where electric power is not available. Features: Die-cast housing with UV resistant powder coat finish Integrated monocrystalline silicon solar panel Adjustable slip fitter accommodates up to 50 tilt to compensate for latitude to improve solar efficiency Adjustable LED module for proper optical performance after tilting the solar panel. High performance LUMILEDS 5050 LED chips achieving 200Lm/W, CRI > 70 Motion sense, fixed output, or time-based control selectable with remote control programmer. (see other accessories for remote control ordering information) Automatically turns on and off without the need for additional photocontrol. LiFePO4 battery with 2000 cycle design life (~5.5 years) High efficiency MPPT charge controller Operating Temperature -10 C to +50 C High transmittance, UV-inhibited, flame retardant polycarbonate lens 6kA lightning surge protection IP65 rated Standard with slip fitter mounting Applications: Parking areas Roadway Recreation Areas Walkways Warranty & Listings: Five (5) year warranty CE listed NOTICE: One remote is required per installa on site. Ordering Information Model Wattage CCT Mounting 1 Housing Color SLS: Solar LED Streetlight 008: 8W 4: 4000K SF: Slip fitter G: Grey 020: 20W 030: 30W 1 - See addi onal moun ng accessories Model Details Model # Solar Panel Wattage Battery (WHr) Charging Time (Hr) Full Power Run Time (Hr) Max. Run Time 2 (Hr) Lumens 4000K Optics Dimension L x W x H (in) Weight (lbs.) Min. EPA 3 (in^2) Max. EPA 4 (in^2) SLS Type III 20.5x11.4x SLS Type III 25.98x16.54x SLS Type III 42.13x19.29x Half light output at 40% ba ery state of charge 3-15 solar panel lt 4-50 solar panel lt

38 SLS - Solar LED Streetlight Moun ng Accessories Mount Slip Fi er Trunnion S quare Hoop R ound Hoop Diagram SolarL ighting Applica on Ver cal or horizontal tenon 1-1/4NPS to 2NPS (1.66 to 2.37 ) Wall mount or square pole wider than 4.75 Round pole 2.36 to 3.94 or Square pole 1.97 to 3.94 Round pole 1.97 to 4.72 Parts to order I ncluded with SLS luminaire SLS-TR S LS-SH and SLS-TR S LS-RH and SLS-TR Other Accessories SLS-RC S LS008-BATT SLS020-BATT SLS030-BATT Remote control programmer Replacement ba ery kit for 8W Replacement ba ery kit for 20W Replacement ba ery kit for 30W One needed per site. Works with mul ple luminaires Replacement door with driver/charger, mo on sensor, and ba ery with modular connec ons Replacement door with driver/charger, mo on sensor, and ba ery with modular connec ons Replacement door with driver/charger, mo on sensor, and ba ery with modular connec ons SLS0084SFG Photometric Performance SLS0204SFG Photometric Performance SLS0304SFG Photometric Performance

39 Notes 39

40 580 Eastview Drive Laurel, MS P.O. Box 1590 Laurel, MS general fax Revision Revision Date: Date: 10/3/2017 1/22/