LED Lamps & Accessories Lighting Guide
|
|
|
- Sabina Holt
- 5 years ago
- Views:
Transcription
1 LED Lamps & Accessories Lighting Guide 1
2 LED Lamps & Accessories Lighting Guide Table of Contents Mogul Base LED... 3 Medium Base Linear LED Photocells
3 Mogul-Base Area LED Replacement Lamp 3000K, 4000K / 80W, 110W / 125 Lm/W Specification Sheet Project: Catalog#: Approved by: LEDMAR No Ballast needed (UL Type B) Internal driver/line voltage lamp Remove ballast from fixture Features 120 Lm/W Power Factor: >0.9 CCT: 3000K or 4000K; CRI: >80 Long Life: 10 years Operating temperature range: -40 C (-40 F) to +60 C (140 F) IP64 Design - Driver is fully potted with silicone. Waterproof, dust proof, and bug proof Flame retardant material Suitable for totally enclosed fixtures Built in 6kV surge protection UL/cUL Listed, UL Classified VAC, 50/60Hz Non-dimming Warranty: 5 Years No Fan Applications LEDMAR lamps are designed as an energy saving LED replacement for retrofitting HID area luminaires. Shoe Box Ordering Information Catalog # Lumens CCT Watts Lm/W Cover Base Replacement LEDMAR-3080-MV LEDMAR-4080-MV LEDMAR MV LEDMAR MV 9,600 13, K 4000K 3000K 4000K 80W 110W 120 Clear EX39 250W HPS or MH 400W HPS or MH Specifications subject to change without notice. Page 1 of 2 Rev: 10/4/2018 3
4 Specification Sheet LEDMAR Dimensions (in) W 110W LEDMAR vs. Common Lamp Sizes Lamp Base L (in.) D (in.) LEDMAR-XX80-MV (closed) LEDMAR-XX80-MV (open) 9.0 EX39 LEDMAR-XX110-MV (closed) LEDMAR-XX110-MV (open) 9.0 LU150/ LU MH250/U E MH400/U H37KB H33CD REPLAC E Accessories (sold seperately) Mogul Socket LH-MOE-01 Surge Protector 20kV, 10kA HL-LSP10GI277P Twist lock long life photocontrol Multi-volt, fail-on, 8A at 120V and 5A at 277V HI-LL BK-12 Specifications subject to change without notice. Page 2 of 2 Rev: 10/4/2018 4
5 Mogul-Base LED High Bay Replacement Lamp 3000K, 4000K / 115W / Lm/W Specification Sheet Project: Catalog#: Approved by: LEDMBR No Ballast needed (UL Type B) Internal driver/line voltage lamp Remove ballast from fixture Applications LEDMBR lamps are designed as an energy saving LED replacement for retrofitting HID high bay and garage luminaires. Features Retrofit to existing 400W HID High Bay fixtures in warehouse or garage applications Lm/W Power Factor: >0.9 CCT: 3000K or 4000K; CRI: >80 Long Life: 10 years Operating temperature range: -40 C (-40 F) to +60 C (140 F) Flame retardant material Suitable for totally enclosed fixtures Built in 6kV surge protection UL/cUL Listed, UL Classified VAC, 50/60Hz Non-dimming Warranty: 5 Years No Fan High Bay Ordering Information Catalog # Lumens CCT Watts Lm/W Cover Base Replacement LEDMBR MV 14, K W LEDMBR MV 14, K 130 Clear EX39 400W HPS or MH Specifications subject to change without notice. Page 1 of 2 Rev: 10/4/2018 5
6 Specification Sheet LEDMBR Dimensions (in) 8.0 LEDMHR vs. Common Lamp Sizes 8.1 Lamp Base L (in.) D (in.) LEDMBR-XX115-MV EX LU250 LU MH250/U E MH400/U H37KB Accessories (sold seperately) Specifications subject to change without notice. Mogul Socket LH-MOE-01 Surge Protector 20kV, 10kA HL-LSP10GI277P Page 2 of 2 Rev: 10/4/2018 6
7 Mogul-Base High Wattage LED Replacement Lamp 3000K, 4000K / 80W, 100W / 135 Lm/W Specification Sheet Project: Catalog#: Approved by: LEDMHR Applications No Ballast needed (UL Type B) Internal driver/line voltage lamp Remove ballast from fixture LEDMHR lamps are designed as an energy saving LED replacement for retrofitting high wattage HID post top and tear drop fixtures. Features 135 Lm/W Power Factor: >0.9 CCT: 3000K or 4000K; CRI: >80 Long Life: 10 years Operating temperature range: -40 C (-40 F) to +60 C (140 F) IP64 Design - Driver is fully potted with silicone. Waterproof, dust proof, and bug proof Flame retardant material Suitable for totally enclosed fixtures Built in 6kV surge protection UL/cUL Listed, Classified VAC, 50/60Hz Non-dimming Warranty: 5 Years No Fan Shoe Box High Bay Acorn Tear Drop Ordering Information Catalog # Lumens CCT Watts Lm/W Cover Base Replacement LEDMHR-3080-MV LEDMHR-4080-MV LEDMHR MV LEDMHR MV 10,800 13, K 4000K 3000K 4000K 80W 100W 135 Clear EX39 250W HPS or MH 400W HPS or MH Specifications subject to change without notice. Page 1 of 2 Rev: 10/4/2018 7
8 Specification Sheet LEDMHR Dimensions (in) LEDMHR vs. Common Lamp Sizes Lamp Base L (in.) D (in.) LEDMHR-XX80-MV EX39 LEDMHR-XX100-MV 12.7 LU150/55 LU LU MH250/U E MH400/U H37KB H33CD W 100W Accessories (sold seperately) Mogul Socket LH-MOE-01 Surge Protector 20kV, 10kA HL-LSP10GI277P Twist lock long life photocontrol Multi-volt, fail-on, 8A at 120V and 5A at 277V HI-LL BK-12 Specifications subject to change without notice. Page 2 of 2 Rev: 10/4/2018 8
9 Specification Sheet Mogul-Base LED Replacement Lamp 3000K, 4000K / 30W, 40W, 50W / 125 Lm/W Project: Catalog#: Approved by: LEDMR No Ballast needed (UL Type B) Internal driver/line voltage lamp Remove ballast from fixture Features 125 Lm/W 360 Beam Angle Power Factor: >0.9 CCT: 3000K or 4000K; CRI: >80 Long Life: 10 years Operating temperature range: -30 to +60 C IP65 Design - Driver is fully sealed with heat sink silicone Waterproof, dust proof, and bug proof Flame retardant material UL/cUL Listed, UL Classified VAC, 50/60Hz Built-in 4kV surge protection Non-dimming Warranty: 5 Years Applications Wallpack Posttop Posttop Acorn Ball Garage Light Visit for the Qualified Products List Pendant Floodlight Ordering Information Catalog # Lumens CCT Watts Lm/W Cover Base* Replacement LEDMR-3030-MV K 30W 125 Slight Frost E39 Mogul 70W HID LEDMR-4030-MV K 30W 125 Slight Frost E39 Mogul 70W HID LEDMR-4040-MV K 40W 125 Slight Frost E39 Mogul 100W HID LEDMR-3050-MV K 50W 125 Slight Frost E39 Mogul 175W HID LEDMR-4050-MV K 50W 125 Slight Frost E39 Mogul 175W HID *Will not fit Ex39 (Pink) socket Specifications subject to change without notice. Non-stock item. Call for lead times 9 Page 1 of 2 Rev: 10/4/2018
10 Specification Sheet Mogul-Base LED Replacement Lamp 3000K, 4000K / 30W, 40W, 50W / 125 Lm/W Project: Catalog#: Approved by: LEDMR After Dimensions Φ 3.37 Φ 83 mm will replace 125 lm/w 360º beam angle Flame retardant material IP65 waterproof design mm LEDMR vs. Common Lamp Sizes Lamp Base L (in.) D (in.) LEDMR-XXXX-MV E39 (default) w/ medium base adapter LU100 LU150/ MH150/U E MH175/U H39KB H37KC-175/DX 3.5 Visit for the Qualified Products List Accessories (sold seperately) Mogul Socket LH-MOE-01 Surge Protector 20kV, 10kA HL-LSP10GI277P Twist lock long life photocontrol Multi-volt, fail-on, 8A at 120V and 5A at 277V HI-LL BK-12 Specifications subject to change without notice. 10 Page 2 of 2 Rev: 10/4/2018
11 Mogul-Base LED Replacement Lamp 3000K, 4000K / 27W, 36W, 45W, 54W Specification Sheet Project: Catalog#: Approved by: LEDMXR No Ballast needed (UL Type B) Internal driver/line voltage lamp Remove ballast from fixture Features Reduced Uplight, Base Down Cutoff Distribution, No LED s on Top Lm/W Power Factor: >0.9 CCT: 3000K or 4000K; CRI: >80 Long Life: 10 years Operating temperature range: -40 to +140 F IP64 Design - Driver is fully potted with silicone. Waterproof, dust proof, and bug proof Flame retardant material UL/cUL Listed, UL Classified VAC, 50/60Hz Non-dimming Warranty: 5 Years No Fan Ordering Information Applications Acorn Post Top Ball Catalog # Lumens CCT Watts Lm/W Cover Base Replacement LEDMXR-3027-MV Clear EX39 100W HPS or MH LEDMXR-4027-MV Clear EX39 100W HPS or MH LEDMXR-3036-MV Clear EX39 150W HPS or MH LEDMXR-4036-MV Clear EX39 150W HPS or MH LEDMXR-3045-MV Clear EX39 175W MH LEDMXR-4045-MV Clear EX39 175W MH LEDMXR-3054-MV Clear EX39 200W HPS or MH LEDMXR-4054-MV Clear EX39 200W HPS or MH Specifications subject to change without notice. Page 1 of 2 Rev: 10/4/
12 Specification Sheet Mogul-Base LED Replacement Lamp 3000K, 4000K / 27W, 36W, 45W, 54W Project: Catalog#: Approved by: LEDMXR Dimensions (in) W 36W 45W 54W LEDMXR vs. Common Lamp Sizes Lamp Base L (in.) D (in.) LEDMXR-XX27-MV 8.2 LEDMXR-XX36-MV 8.5 EX39 LEDMXR-XX45-MV LEDMXR-XX59-MV 10.6 LU100 LU150/ MH150/U E MH175/U H39KB H37KC-175/DX 3.5 Specifications subject to change without notice. Page 2 of 2 Rev: 10/4/
13 Specification Sheet Medium-Base LED Replacement Lamp 3000K, 4000K / 15W, 19W, 24W / 130 Lm/W Project: Catalog#: Approved by: LEDMEDR No Ballast needed (UL Type B) Internal driver/line voltage lamp Remove ballast from fixture Features 130 Lm/W 360 Beam Angle (Omni Directional) Power Factor: >0.9 CCT: 3000K or 4000K; CRI: >80 Long Life: 10 years Operating temperature range: -40 to +60 C IP64 Design - Driver is fully potted with silicone. Waterproof, dust proof, and bug proof Flame retardant material UL/cUL Listed, UL Classified VAC, 50/60Hz Built-in 4kV surge protection Non-dimming Warranty: 5 Years Applications Wallpack Posttop Includes Mogul Base to Medium Base Socket Reducer (E39 - E26) Acorn Ball Pendant Floodlight Posttop Garage Light Ordering Information Catalog # Lumens CCT Watts Lm/W Cover Base Replacement LEDMEDR-3015-MV Clear E26 MED 50W HPS or MH LEDMEDR-4015-MV Clear E26 MED 50W HPS or MH LEDMEDR-3019-MV Clear E26 MED 70W HPS or MH LEDMEDR-4019-MV Clear E26 MED 70W HPS or MH LEDMEDR-3024-MV Clear E26 MED 100W HPS or MH LEDMEDR-4024-MV Clear E26 MED 100W HPS or MH Specifications subject to change without notice. Page 1 of 2 Rev: 10/4/
14 Specification Sheet Medium-Base LED Replacement Lamp 3000K, 4000K / 15W, 19W, 24W / 130 Lm/W Project: Catalog#: Approved by: LEDMEDR Dimensions (in) W 19W 24W LEDMEDR vs. Common Lamp Sizes Lamp Base L (in.) D (in.) LEDMEDR-XX15-MV 5.67 LEDMEDR-XX19-MV E26 (default) 6.1 LEDMEDR-XX24-MV LEDMEDR-XX15-MV 6.57 LEDMEDR-XX19-MV w/ adapter (Adds 0.9 inch) 7.0 LEDMEDR-XX24-MV 7.55 LU100 LU150/ MH150/U E MH175/U H39KB H37KC-175/DX 3.5 Specifications subject to change without notice. Page 2 of 2 Rev: 10/4/
15 F32T8/8XX/LED/16W/AC Linear LED Lamps 10/04/2016 Linear LED T8 Lamp F32T8 / 4Ft / 16W Internal Driver/Line Voltage LED Linear T8 Replacement Lamps are the ideal energy saving product when upgrading traditional T8 or T12 fluoescent lamps in fixtures. The LED T8 lamps are designed to provide a dedicated internal driver and utilizes nonshunted G13 medium bipin lamp holders. Features: F32T8 / 4 Foot LED Energy Saving Lamps 16W / 2,200 Lumens / 130 lm/w 82 CRI Power Factor ( PF ) > 0.9 Total Harmonic Distortion (THD) 20% Internal driver/line voltage (UL Type B) No ballast needed Must use non-shunted lamp holders Designed to operate between -20 C and 45 C ambient temperature Environmentally friendly: no mercury, no UV or infrared light Low lumen depreciation -- 50,000 hour rated life Minimum heat emission, reducing load on building cooling systems. Instant-on, no delay or flicker Used for upgrading T8 and T12 fixtures Uses G13 medium bipin lampholders Glass tube for superior optical performance Opal lens prevents glare 5-Year Warranty Colors Available 3000* * 5000 Catalog # Length (in) Power (W) F32T8/830/LED/16W/AC* Driver CCT Initial Lumens CRI Beam Angle Life 3000K ,000 F32T8/835/LED/16W/AC F32T8/840/LED/16W/AC F32T8/845/LED/16W/AC* Internal Driver allows for bypassing of existing ballast 3500K 4000K 4500K ,000 50,000 50,000 F32T8/850/LED/16W/AC K ,000 * Non-stock item Dimensions C D Dimension Min Max A B A N/A in. ( mm) B in. (1204 mm) in. ( mm) C in. ( mm) in. ( mm) D 0.98 in. (25 mm) 1.02 in. (26 mm) No Ballast needed (UL Type B) Internal driver/line voltage lamp Must use non-shunted lamp holders 5 Year Warranty Visit for the Qualified Products List Specifications subject to change without notice. 15
16 F32T8/8XX/LED/14W 4/3/2017 Linear LED T8 Lamp Direct Replacement LED T8: snap in, turn on! Linear LED Lamps Howard s Direct Replacement LED T8 lamp does not require an electrical re-wiring to install. Because the LED T8 s work with instant start ballasts and some programmed start ballasts, they are independent of the ballast operating voltage. This makes switching to LEDs as simple as changing a light bulb (no rewiring or special handling required). Features: No rewiring needed Direct replacement works with existing fluorescent T8 lamp fixtures (instant start and programmed start electronic ballasts) Low energy usage Environmentally friendly: no mercury, no UV or infrared light Low lumen depreciation -- maintains brightness over its 50,000 hour rated life Minimum heat emission, reducing load on building cooling systems. Instant-on, no delay Quick and easy installation Can utiliize existing instant start or rapid start sockets Works with dimming ballast Compatible with controls and sensors Works in cold temperature and applications Glass tube for superior optical performance No flickering Long-life High CRI 85 5-Year Warranty Auto-adjusts to the corresponding Ballast Factor 13w (Low Ballast Factor) 14w (Standard Ballast Factor) 20w (High Ballast Factor) Colors Available 3000* * 5000 UPC Code Catalog # Length (in) Power (W) F32T8/830/LED/14W* Driver CCT Initial Lumens** CRI Beam Angle Lamp Efficacy System Efficacy 3000K ,000 Life F32T8/835/LED/14W F32T8/840/LED/14W F32T8/845/LED/14W* Instant Start or Program Start Electronic T8 Ballast 3500K 4000K 4500K ,000 50,000 50, F32T8/850/LED/14W K ,000 *Non-stock item **Performance is ballast dependent 5 Year Warranty Visit for the Qualified Products List Specifications subject to change without notice. 16
17 F17T8/8XX/LED/11W 4/3/2017 Linear LED T8 Lamp F17T8 / 2Ft / 11W Linear LED Lamps Direct Replacement LED T8 lamp does not require an electrical re-wiring to install. Because the LED T8 s work with instant start ballasts and some programmed start ballasts, they are independent of the ballast operating voltage. This makes switching to LEDs as simple as changing a light bulb (no rewiring or special handling required). Features: F17T8 / 2 Foot LED Energy Saving Lamps 11W / 1,100 Lumens / 104 lm/w 82 CRI Replacement lamp ( Plug and Play ) (UL Type A) Works with existing fluorescent T8 lamp fixtures (instant start and programmed start electronic ballasts) Designed to operate between -20 C and 45 C ambient temperature Environmentally friendly: no mercury, no UV or infrared light Low lumen depreciation -- 50,000 hour rated life Minimum heat emission, reducing load on building cooling systems. Instant-on, no delay or flicker Glass tube for superior optical performance Opal lens prevents glare Works with G13 medium bipin lampholders 5-Year Warranty Catalog # Length (in) Power (W) F17T8/830/LED/11W* Driver CCT Initial Lumens CRI Colors Available 3000* * 5000 Beam Angle Life 3000K ,000 F17T8/835/LED/11W F17T8/840/LED/11W F17T8/845/LED/11W* Instant Start or Program Start Electronic T8 Ballast 3500K 4000K 4500K ,000 50,000 50,000 F17T8/850/LED/11W K ,000 * Non-stock item Dimensions C D Dimension Min Max A B A N/A in. (589.8 mm) B in. (594.4 mm) in. (596.9 mm) C in. (601.2 mm) in. (604 mm) D 0.98 in. (25 mm) 1.02 in. (26 mm) Plug and play replacement lamp (UL Type A); Ballast is necessary 5 Year Warranty Visit for the Qualified Products List Specifications subject to change without notice. 17
18 Direct Replacement T8 LED Lamps 9/5/2018 Linear LED T8 Lamp Direct Replacement LED T8: snap in, turn on! Howard s Direct Replacement LED T8 lamp does not require an electrical re-wiring to install. Because the LED T8 s work with instant start ballasts and some programmed start ballasts, they are independent of the ballast operating voltage. This makes switching to LEDs as simple as changing a light bulb (no rewiring or special handling required). Features: Performance Characteristics: Quick and easy installation. No rewiring needed Direct replacement works with most existing fluorescent T8 lamp ballasts (instant start and programmed start electronic ballasts) Compatible with emergency ballast Low energy usage Environmentally friendly: no mercury, no UV or infrared light Low lumen depreciation maintains brightness over its 50,000 hour rated life Minimum heat emission, reducing load on building cooling systems. Instant-on, no delay Can utilize existing instant start or rapid start sockets Compatible with controls and sensors Works in cold temperature and applications Glass tube for superior optical performance No flickering Long-life Complies with FCC 47 Part 15 Class B, ballast dependent Complies with UL1993/UL Year Warranty Length: 48 in. Ignition Time: 1.0 s High CRI >80 Beam Angle: 325 Operation temperature: -20 C (-4 F) to 45 C (113 F) Storage temperature: -40 C (-40 F) to 85 C (185 F) Target replacement lamps F25T8 (4ft), F28T8 (4ft), F30T8 (4ft), F32T8 (4ft) Plug and play replacement lamp (UL Type A); Ballast is necessary Model Code Power* (W) Initial Lumens* CCT CRI Life Cap DLC T8L ft-CBA ,000 Plastic T8L ft-EBA-A ,000 Aluminum T8L ft-CBA ,000 Plastic T8L ft-EBA ,000 Plastic T8L ft-EBA-A ,000 Aluminum * Performance is ballast dependent. Value shown above is based on standard ballast factor. 1. Full model number and DLC listed as: T8L-IDDM ft-CBA Full model number and DLC listed as: T8L-IDDM ft-EBA-A1 3. Full model number and DLC listed as: T8L-IDDM ft-CBA Full model number and DLC listed as: T8L-IDDM ft-EBA Full model number and DLC listed as: T8L-IDDM ft-EBA-A1 18
19 F32T8/8XXLED/12.5W/AC 08/29/18 Linear LED T8 Lamp Internal Driver/Line Voltage LED T8 Internal Driver/Line Voltage LED Linear T8 Replacement Lamps are the ideal energy saving product when upgrading traditional T8 or T12 fluorescent lamps in fixtures. The LED T8 lamps are designed to provide a dedicated internal driver and utilizes non-shunted G13 medium bi-pin lamp holders. Features: Performance Characteristics: F32T8 / 4 Foot LED Energy Saving Lamps Internal driver/line voltage (UL Type B) No ballast needed Uses G13 medium bi-pin lamp holders Must use non-shunted lamp holders Low energy usage Environmentally friendly: no mercury, no UV or infrared light Low lumen depreciation maintains brightness over its 50,000 hour rated life Minimum heat emission, reducing load on building cooling systems. Instant-on, no delay or flicker Used for upgrading T8 and T12 fixtures Compatible with controls and sensors Works in cold temperature and applications Glass tube for superior optical performance Opal lens prevents glare Used for upgrading T8 and T12 fixtures No flickering Length: 48 in. Input Voltage: Vac Power Factor: 0.90 (-3% tolerance) Total Harmonic Distortion : 20% (+5% tolerance) High CRI >80 Beam Angle: 240 Operation temperature: -20 C (-4 F) to 45 C (113 F) Storage temperature: -40 C (-40 F) to 85 C (185 F) Target replacement lamps F25T8 (4ft), F28T8 (4ft), F30T8 (4ft), F32T8 (4ft) No Ballast needed (UL Type B) Internal driver/line voltage lamp Must use non-shunted lamp holders Model # Power (W) Initial Lumens CCT CRI Life F32T8/840LED/12.5W/AC ,000 F32T8/850LED/12.5W/AC , DLC listed as T8L-IDFH ft-CBA DLC listed as T8L-IDFH ft-EBA-11 Dimensions: Dimension Min Max A N/A in. ( mm) B in. (1204 mm) in. ( mm) B in. ( mm) in. ( mm) D 0.98 in. (25 mm) 1.02 in. (26 mm) 19
20 4/10/2016 U-Shaped LED T8 Lamp FB32T8 / 6in Spacing / 12W FB32T8/8XX/LED/12W U-Shaped LED Lamps Direct Replacement LED T8 lamp does not require an electrical re-wiring to install. Because the LED T8 s work with instant start ballasts and some programmed start ballasts, they are independent of the ballast operating voltage. This makes switching to LEDs as simple as changing a light bulb (no rewiring or special handling required). Features: FB32T8 / 6 Inch Spacing LED Energy Saving Lamps 12W / 1,700 Lumens / 135 lm/w (3000K, 3500K) 12W / 1,800 Lumens / 145 lm/w (4000K, 4500K, 5000K) 82 CRI Replacement lamp ( Plug and Play ) (UL Type A) Works with existing fluorescent T8 lamp fixtures (instant start and programmed start electronic ballasts) Designed to operate between -20 C and 45 C ambient temperature Environmentally friendly: no mercury, no UV or infrared light Low lumen depreciation -- 50,000 hour rated life Minimum heat emission, reducing load on building cooling systems. Instant-on, no delay or flicker Glass tube for superior optical performance and frosted glass prevents glare Works with 2G13 medium bipin lampholders 5-Year Warranty Colors Available 3000* * 5000 Catalog # Length (in) Power (W) FB32T8/830/LED/12W 6in spacing 12 Driver CCT Initial Lumens CRI Life 3000K ,000 FB32T8/835/LED/12W FB32T8/840/LED/12W FB32T8/845/LED/12W 6in spacing 6in spacing 6in spacing Instant Start or Program Start Electronic T8 Ballast 3500K 4000K 4500K ,000 50,000 50,000 FB32T8/850/LED/12W 6in spacing K ,000 * Non-stock item Dimensions B A E Leg strap Dimension A B C D E D Max 5.98 in. (152 mm) in. (570 mm) 1.02 in. (26 mm) 0.98 in. (24.8 mm) 1.09 in. (27.8 mm) 5 Year Warranty C Plug and play replacement lamp (UL Type A); Ballast is necessary Specifications subject to change without notice. 20
21 LONG LIFE SERIES PHOTOCONTROL OVERVIEW Howard Lighting Products photocontrols were designed for the demands of HID and solid-state lighting (SSL), making them an excellent choice for LED, conventional & Electronic HID, and Induction luminaires. Controls APPLICATIONS LED luminaires that require dusk to dawn control. Recommended for luminaires that use solid state ballasts/drivers (e.g. CFL, Induction, Electronic HID, LED). FEATURES The HI-LL is specifically designed to provide long-life, enhanced light sensitivity, and superior surge protection when used with LED luminaires. Filtered Silicon Light Sensor - sensitive to Sunlight but not LED. Sealed relay. MOV Surge Suppressor rated for 640 Joules/20,000 Amp. Base Gasket has a continuous use temperature of 105 C. 3 6 second turn-off delay. Black cover standard. Other colors optional. SPECIFICATIONS REGULATORY LISTINGS Meets ANSI C ROHS compliant Manufactured in a ISO certified facility Surge Rated to (and exceeds) ANSI C Extreme surge level OPERATING CHARACTERISTICS Voltage 105 to 305 VAC, 60Hz Load rating: 1800VA driver or ballast load. Up to 200 amp inrush Temp. -40 to +70 C ambient ADDITIONAL FEATURES ENHANCED LIGHT SENSING The silicon photo sensor is designed to sense sunlight, while being blind to light emitted from LEDs. This reduces LED sensitivity and greatly decreases false turn-off in high ambient light situations. INRUSH PROTECTION Tested and approved for use with fixtures that use multiple LED drivers, the HI-LL can withstand the high inrush current that these drivers generate. SURGE PROTECTION Employing four MOV s exceeds ANSI Extreme Category (20kV, 10kA) surge protection for the control, and also protects the solid state driver from differential mode transients. DESIGN LIFE ENHANCEMENTS Design life is period of time that the product is expected to work within its specified parameters; the HI-LL is rated for 90,000 hours. Printed circuit board is fiber-glass/epoxy FR4 for superior strength and moisture resistance, and is conformally coated on both sides to reduce water absorption.the cover is inches thick for better impact resistance, compared to 0.06 inches on standard controls. Cover is sealed to the base to provide IP64 ingress protection. LONG LIFE CONTROL HI-LL VOLTAGE TURN ON LEVELS (1.5 ratio) COVER COLOR WARRANTY TERM FAILURE MODE 127: VAC 15: 1.5fc (ANSI Standard) BK: Black 12: 12 year Blank: Fail ON 480: VAC 10: 1.0fc BU: Blue F: Fail OFF 26: 2.6fc (IES) GN: Green WARRANTY All photocontrols are marked with date of manufacture. This product is warrantied to operate within its original specifications and shall be free of electrical or mechanical defects. Consult factory for the warranty time period. Manufacturer s warranty shall be limited to providing a replacement control of same type and shall not cover costs of removal, replacement or loss of service nor any consequential damages. This warranty is in lieu of and excludes all other warranties either expressed or implied. Full warranty statement is available by consulting factory Specifications subject to change without notice. 21
22 Notes 22
23 Notes 23
24 580 Eastview Drive Laurel, MS P.O. Box 1590 Laurel, MS general fax Revision Revision Date: Date: 10/3/2017 1/25/
LED T8 EXTERNAL DRIVER EXTERNAL DIMMABLE T8 PLASTIC SERIES UL TYPE-C
PROJECT NAME: CATALOG NUMBER: NOTES: FIXTURE SCHEDULE: Page: 1 of 7 LED T8 EXTERNAL DRIVER DDR2L18 DDR4L18 PRODUCT DESCRIPTION: MaxLite LED T8 with External Driver are the ideal energy saving choices when
UNIVERSAL LIGHT G4. IP64
t all products are qualified on the DLC QPL. To view our DLC qualified products, please consult the DLC Qualified Products List at www.designlights.org/qpl. UNIVERSAL LIGHT G4 www.trulygreensolutions.com
UNIVERSAL LIGHT 27-54W. IP64 WARRANTY
t all products are qualified on the DLC QPL. To view our DLC qualified products, please consult the DLC Qualified Products List at www.designlights.org/qpl. UNIVERSAL LIGHT 27-4W www.trulygreensolutions.com
UNIVERSAL LIGHT 15-24W. IP64 WARRANTY
t all products are qualified on the DLC QPL. To view our DLC qualified products, please consult the DLC Qualified Products List at www.designlights.org/qpl. UNIVERSAL LIGHT 15-24W www.trulygreensolutions.com
UNIVERSAL LIGHT 15-24W. IP64
view our DLC qualified products, please consult the DLC Qualified Products List at www.designlights.org/qpl. UNIVERSAL LIGHT 15- www.trulygreensolutions.com 3 MODELS AVAILABLE IN / / EXPECTED LIFE OVER
UNIVERSAL STREET LIGHT G4. IP64
t all products are qualified on the DLC QPL. To view our DLC qualified products, please consult the DLC Qualified Products List at www.designlights.org/qpl. UNIVERSAL STREET LIGHT G4 www.trulygreensolutions.com
www.greenelectricalsupply.com t all products are qualified on the DLC QPL. To view our DLC qualified products, please consult the DLC Qualified Products List at www.designlights.org/qpl. UNIVERSAL LIGHT
UNIVERSAL LIGHT DS. IP64 WARRANTY
t all products are qualified on the DLC QPL. To view our DLC qualified products, please consult the DLC Qualified Products List at www.designlights.org/qpl. UNIVERSAL LIGHT DS www.trulygreensolutions.com
UNIVERSAL LIGHT DS. IP64 WARRANTY
t all products are qualified on the DLC QPL. To view our DLC qualified products, please consult the DLC Qualified Products List at www.designlights.org/qpl. UNIVERSAL LIGHT DS www.trulygreensolutions.com
www.greenelectricalsupply.com t all products are qualified on the DLC QPL. To view our DLC qualified products, please consult the DLC Qualified Products List at www.designlights.org/qpl. UNIVERSAL STREET
IP64 WARRANTY UNIVERSAL LIGHT FLX.
UNIVERSAL LIGHT FLX www.trulygreensolutions.com Features 2 WATTAGE AVAILABLE IN 80W / 110W EXPECTED LIFE OVER 50,000 HRS 5 YEAR IES FILES @ www.trulygreensolutions.com Power By 6061 Aluminum alloy heat
directly into the line voltage in case of ballast failures. Straits Lighting X-Series Tubes are UL and DLC Certified.
STREAMLINE LED T8 X-SERIES TUBE PLUG & PLAY AND DIRECT WIRE SOLUTION DESCRIPTION The Straits Lighting LED T8 X-Series Tube delivers exceptional performance and can directly replace a fluorescent tube without
QHC. Modular Chassis LED High-Bay SPECIFICATIONS CERTIFICATION ORDERING INFORMATION EXAMPLE QHC-UL-60C K-AAO-10GYSH IP65
Product Information Project Name Catalog Number QHC Type Date SPECIFICATIONS Features Single 135W fixture directly replaces a 400W HID and equivalent systems. Modular design allows multiple chassis configurations
Industrial Baymaster HL LED Luminaire High Bay for Ordinary Locations
Applications Powerful, efficient weatherproof lighting for applications such as: Warehouses Waste water treatment facilities Production facilities Processing plants Storage areas Locations requiring, Type
HID LED SOLUTIONS OCTOBER 2017
HID LED SOLUTIONS OCTOER 2017 HID REPLACEMENT LED DirectDrive XPANDER 180º HORIZONTAL LAMPS UILT-IN SURGE PROTECTION YPASS THE ALLAST and connect the 120-277V line voltage directly to the sockets. No ballast
Industrial Baymaster LED Luminaire High Bay for Ordinary Locations
Applications Powerful, efficient weatherproof lighting for applications such as: Warehouses Waste water treatment facilities Production facilities Processing plants Storage areas Locations requiring, Type
Project: Catalog No.: CALCULATED LIFETIME. Fixture Type: 100,000 HOURS. Notes:
AL SERIES AREA LIGHT Finish Color Dark Bronze White AL Series LED Area Light luminaries provide substantial energy savings through efficient delivery of light into all areas of parking lots or other large
LED UFO HIGH BAY PRODUCT DESCRIPTION SPECIFICATION. Project Name Product Code SKU No. Memo Data
CUSTOMIZATION Project Name Product Code SKU No. Memo Data LED UFO HIGH BAY T CONTROLS IMAGE MAY VARY FROM ACTUAL PRODUCT PRODUCT DESCRIPTION LED UFO High Bay Light is for workshop, warehouse, indoor stadium
Albeo LED Luminaire LED High Bay Lighting (ABV3 - Series)
Albeo LED Luminaire LED High Bay Lighting (ABV3 - Series) Project name Date Type Product Description: The Albeo ABV3 LED luminaire is an exceptional mixture of value and performance. Ideal for high bay
Tellus 22 LED Area Light
Catalog # : Project : Prepared By : Date : Tellus LED Area Light The Tellus Area Light provides the best solution with the highest return on investment when replacing existing HID area lighting fixtures.
* Optional TLPC shown. Mounting for Square Pole ORDERING INFORMATION 72W 108W 141W 188W 108LED 141LED 188LED. DM 0-10V Dimming. (Std.
Revised: 11.1.16 LED AREA / PARKING / STREET LIGHT LAP-G APPLICATION For all applications in site, area, and general lighting requiring high uniformity, excellent vertical light distribution, reduced offsite
PROJECT INFORMATION. Project Name. Catalog #
PROJECT INFORMATION Project Name Type SLIM HIGH BAY LED Catalog # APPLICATIONS Retail Warehouses Manufacturing Plants Date Industrial Facilities Storage Facilities Large Open Areas UNLENSED (STANDARD)
UNIVERSAL LIGHT 27-54W. IP64
t all products are qualified on the DLC QPL. To view our DLC qualified products, please consult the DLC Qualified Products List at www.designlights.org/qpl. UNIVERSAL LIGHT 27-4W www.trulygreensolutions.com
CITY OF BOISE SPECIFICATIONS FOR LIGHT EMITTING DIODE (LED) STREET LIGHTING Effective 1 Feb, 2018
CITY OF BOISE SPECIFICATIONS FOR LIGHT EMITTING DIODE (LED) STREET LIGHTING Effective 1 Feb, 2018 1. LIGHT EMITTING DIODE (LED) LUMINAIRES FOR ROADWAY TYPE 3 ILLUMINATION A. Testing and Compliance I Manufacturer
60 Watt Portable LED Work Area Light - Waterproof - Aluminum Frame - Adjustable Light Head
60 Watt Portable LED Work Area Light - Waterproof - Aluminum Frame - Adjustable Light Head - 120-277 Part #: WAL-PM-WP60 Page: 1 Made in the USA The WAL-PM-WP60 Portable LED Work Light from Larson Electronics
TRUEFIT G2 TUBE.
t all products are qualified on the DLC QPL. To view our DLC qualified products, please consult the DLC Qualified Products List at www.designlights.org/qpl. TRUEFIT G2 TUBE www.trulygreensolutions.com
TROFFER RETROFIT KIT (TRK)
Not all products are qualified on the DLC QPL. To view our DLC qualified products, please consult the DLC Qualified Products List at www.designlights.org/qpl. www.trulygreensolutions.com 4 MODELS AVAILABLE
Freedom Industrial LED Luminaire
Freedom Industrial LED Luminaire Modular High & Low Bay Lighting 50W 100W 150W 300W 400W Freedom LED High Bay DESIGNED FOR DURABILITY & FLEXIBILITY Product Family Information The Freedom HBG-Series LED
Arca LED 5YEAR LED WARRANTY. Order Code: Pole Order Code: Customer: Date: Project: Qty: Type: ACL ACL. R2 Type II Distribution.
Date: Customer: Project: Type: Qty: Arca LED Order Code: Pole Order Code: ACL - R2 - - - - - - - - - HC - - - - - - - - - Series Height Finish Helicoil Options *Helicoil Locations Pair * Refer to chart
TRUEFIT U-BEND LED TUBE.
Not all products are qualified on the DLC QPL. To view our DLC qualified products, please consult the DLC Qualified Products List at www.designlights.org/qpl. TRUEFIT U-BEND LED TUBE www.trulygreensolutions.com
GE Evolve LED L-Series Wall Pack EWLS
The Evolve,, is a designed replacement for 50W to 250W HID, while offering significant energy savings in a long-life LED wall pack. The 's 2-screw housing design enables a fast and simplified installation.
Typical Applications Heavy industrial Light manufacturing Warehousing Large indoor ORDERING INFORMATION V V V 2
Catalog Number Type Phuzion DesignLights Consortium (DLC) qualified product. Not all versions of this product may be DLC qualified. Please check the DLC Qualified Products List at www.designlights.org
Project Name. Date. Cat. Number. Type
Hosedown Series 2.0 Enclosed and Gasketed LED Luminaires The improved Hosedown Series features LED high bay fixtures for use in demanding environments requiring watertight seals. Each model includes an
TRUEFIT LED TUBE.
t all products are qualified on the DLC QPL. To view our DLC qualified products, please consult the DLC Qualified Products List at www.designlights.org/qpl. TRUEFIT LED TUBE www.trulygreensolutions.com
Halco AL-Series Area Light
Catalog Number: Type: Project: Comments: Date: YR WARRANTY The Halco AL-Series is one of the most innovative area lighting solutions on the market today. While maintaining a slim, aesthetic design, the
ROUND PENDANT LED HIGH BAY HP Gen. 2 SERIES
PROJECT NAME: CATALOG NUMBER: NOTES: FIXTURE SCHEDULE: Page: 1 of 5 ROUND PENDANT LED HIGH BAY Fixture with Shade* Standard Fixture with Frosted Lens 3/4" NPT THREAD Fixture with Shade and Drop Lens* 10
LED FLOODS. Round Back VFloods. Benefits and Features. Accessories (Order as separate line items)
LED FLOODS Round Back VFloods Order Lumen Color Lumen Maint. Calc.L7@ C Fixture Amp. Draw (A) Replaces Existing Model Wattage Code Output Temp. CRI @, hours Amb.(hrs) Color V 77V HID Wattages Number W
LED Product Catalog LightFair 2016
LED Product Catalog LightFair 2016 Why RTG? With over 10 years in the industry, RTG Lighting has fine-tuned the lighting upgrade process. With our many products and services offered, you can count on RTG
Input Voltage: V. Efficacy. Dimming: 0-10V standard dimming capability.
Technical Specifications Description The High Bay luminaire delivers the illumination performance to replace up to a 400W HID fixture one-for-one. Lumecon s unique High Bay design makes this fixture an
FFC SERIES CONTRACTORS
FFC SERIES CONTRACTORS Project: Catalog No.: Fixture Type: Notes: Finish Color Dark Bronze White Save time and effort without the unnecessary work. At we ve made your product selection much simple. When
High Wattage, High Bay LED Fixture
High Wattage, High Bay LED Fixture ehid to LED Technology Introduction Metrolight introduces a high h wattage, high bay LED fixture that is powered by SmartHID technology and is fully compatible with Metrolight's
Mirada - XALM Outdoor LED Area Light
Catalog # : Project : Prepared By : Date : Mirada - XALM The Mirada s sleek design makes it perfectly-suited for architectural applications, while its cost-effective die-cast aluminum housing makes its
TITAN-HM. DOT Approved LED High Mast Luminaire E465685
TITAN-HM DOT Approved LED High Mast Luminaire E465685 Global Tech LED High Mast Advantages Benefits Meets DOT Criteria Replace 1,000 Watt HPS Up to 70% energy savings compared to HID 50% maintenance reduction
Indoor/Outdoor Modular Solution for Commercial Applications. series
Indoor/Outdoor Modular Solution for Commercial Applications a g e V RB series Vega RB SERIES Versatile for mounting on walls or ceilings, the Vega RB series is an excellent choice for tunnels or sloped
Light Engine. Tilt of. Mounting. Pole Series K. R3W Type III Distribution Wide R3N Type III Distribution Narrow R5 Type V Distribution
Project: AV6 Series Type: Mounting Options Tilt of Mounting Light Series Optics CCT Qty: Power Length (ft.) Height Finish Options Finish Voltage T30 Tilt of Series Mounting Light Power Mounting Optics
2016 Product Catalog-Q3
2016 Product Catalog-Q3 800-974-4LED (4533) www.leddirectsupply.com Dry Location LED Lamp MH/HPS/HID Replacement Part # Base Lumens Watts Equal Color Temp. Size D x L Per Case Qty. CL-30w-E26 Medium 3600
Specification Data Sheet
Specification Indoor Light : T8T Series Standard Standard Specification Data Sheet T8 Series ( Standard ) Product Picture : T8T-4ft Features 3 Years Warranty Specified Beam Angle CE / UL / DLC / RoHS Certificated
Premium Area Light QMP Unique Fixture
Page 1 of 8 QuadroMAX Plus is a modular area lighting fixture capable of replacing traditional metal halide solutions from 150W to 750W. Up to six LED modules can be interlocked to create lumen packages
PKG-304-5M-DM. 304 Series Parking Structure Luminaire Type V Medium Direct Mount. Product Description. Performance Summary
PKG-304-5M-DM 304 Series Parking Structure Luminaire Type V Medium Direct Mount Product Description Slim, low profile design. Lumianire is constructed from rugged die cast and extruded aluminum components.
High Bay Lighting. (ABV2-Series)
Albeo LED Luminaire High Bay Lighting (ABV2-Series) Product Features Expanding on the award-winning ABV-Series, the Albeo ABV2 LED luminaire is an exceptional mixture of value and performance. With improved
Premium Area Light QMP Unique Fixture
Page 1 of 6 QuadroMAX Plus is a modular area lighting fixture capable of replacing traditional metal halide solutions from 150W to 750W. Up to six LED modules can be interlocked to create lumen packages
www.greenelectricalsupply.com Page 1 of 4 DESCRIPTION Replacement for Conventional T12HO and T8HO Fluorescent Lamps for Sign Applications APPLICATION Used for Outdoor Signage (Single or Double Sided) PRODUCT
SPECIALTY FLOODLIGHTING. ACP Series LED ACP1 & ACP2 LED Floodlighting
SPECIALTY FLOODLIGHTING ACP Series LED ACP1 & ACP2 LED Floodlighting SPECIALTY FLOODLIGHTING The ACP Series LED ACP1LED & ACP2LED The ACP LED is a sustainable solution for floodlighting applications with
LED SLIM AREA LIGHTS AR-MAL SERIES
PROJECT NAME: CATALOG NUMBER: NOTES: FIXTURE SCHEDULE: Page: 1 of 5 LED SLIM AREA LIGHTS FEATURES: Replaces up to 750 PSMH Universal 120-277V dimming driver standard, 347-480V available Dusk-to-dawn and
THE HIGH. Retro-Fit Kits (all lengths & full specification) PERFORMANCE KEY FEATURES INCLUDE:
THE HIGH PERFORMANCE LED Replacement Series for Fluorescent Tubes, High Bays, and Parking Garages. KEY FEATURES INCLUDE: Advanced Thermal Management Industry Leading Deep Fin Heat Sinks with Aircraft Grade
ROADWAY & SECURITY LIGHTING. Autobahn Series ATBS LED Roadway & Security
ROADWAY & SECURITY LIGHTING Autobahn Series ATBS LED Roadway & Security ROADWAY & SECURITY LIGHTING ATBS LED Roadway & Security The ATBS is a true multi-use product. Through the use of Field Adjustable
QuadroMAX LED FIXTURE QM SERIES
PROJECT NAME: CATALOG NUMBER: NOTES: FIXTURE SCHEDULE: Page: 1 of 8 QuadroMAX LED FIXTURE Mounting Options Slipfitter Fixed Slipfitter Knuckle Pole Mount Fixed Surface Mount Canopy Knuckle Surface Mount
Premium Area Light 10 C O N T R O LLE D
Page 1 of 6 QuadroMAX Plus is a modular area lighting system capable of replacing traditional metal halide solutions from 150W to 750W. Up to six LED modules can be interlocked to create lumen packages
High Wattage, High Bay LED Fixture
High Wattage, High Bay LED Fixture ehid to LED Technology Introduction Metrolight introduces a high h wattage, high bay LED fixture that is powered by SmartHID technology and is fully compatible with Metrolight's
AphosTM. Luminaires by EYE Lighting. The smart lighting solution for indoor and outdoor applications.
AphosTM Luminaires by EYE Lighting The smart lighting solution for indoor and outdoor applications. AphosTM Luminaires by EYE Lighting RUGGED. RELIABLE. EFFICIENT. TM Aphos is a new energy-efficient line
LFS - LAL LED Large Wall Pack
Description The LFS-LAL large wall pack is the first of its kind in Lumecon s LED Fire Series. Combining a sleek fixture design with energy efficient performance allows this fixture to be used in parking
Noribachi DLC Zippy Kits!
Easy, flexible installation no need for a custom plate! High lumen packages One for one replacement with HID, MH or HPS bulbs Best in the business efficacy Consistent color temperature These are the only
LFS - SAL LED Small Wall Pack
Description The LFS-SAL small wall pack light is the first of its kind in Lumecon s LED Fire Series. Combining a sleek fixture design with energy efficient performance allows this fixture to be used in
Today s Lighting Installations Require Tomorrow s Lighting Controls
Electronic Photocontrols Photocontrols with Extended Life Expectancy Today s Lighting Installations Require Tomorrow s Lighting Controls Introducing Electronic Photocontrols from Intermatic The long life
LFS - SAL LED Small Area Light
Description The LFS-SAL small area light is the first of its kind in Lumecon s LED Fire Series. Combining a sleek fixture design with energy efficient performance allows this fixture to be used in parking
LFS - LAL LED Large Area Light
Description The LFS-LAL large area light is the first of its kind in Lumecon s LED Fire Series. Combining a sleek fixture design with energy efficient performance allows this fixture to be used in parking
specifications: Metrolight SmartHID Electronic Ballast 100/150/ Watt - HPS 175/200/250/320/400/450 Watt - MH
specifications: Metrolight SmartHID Electronic Ballast 100/150/250-400 Watt - HPS 175/200/250/320/400/450 Watt - MH Operating Specifications Metrolight SmartHID Electronic Ballasts superior lumen maintenance
LFS - SAL LED Small Area Light
FIRE SERIES Description The LFS-SAL small area light is the first of its kind in Lumecon s LED Fire Series. Combining a sleek fixture design with energy efficient performance allows this fixture to be
LED Shoebox/Area Light
Catalog #: Project : Type : Date: Notes: LED Shoebox/Area Light DESCRIPTION State-of-the-art design luminaire for parking lots & security lighting. Corrosion resistant with Type II, III, IV, & V Optics
Flexible Top Light 270. Features and Benefits.
Flexible Top Light 270 Features and Benefits Seamless Dot-free Illumination Domed profile allows for a 270 beam Angle Your choice of Epistar or Nichia LEDs Quick Lead Times Fabricated with Eco-friendly,
LED Product Catalog Buildings NY 2016
LED Product Catalog Buildings NY 2016 Why RTG? With over 10 years in the industry, RTG Lighting has fine-tuned the lighting upgrade process. With our many products and services offered, you can count on
ROAM 120V-277V Node Control Specification Guideline Division 16520
ROAM 120V-277V Node Control Specification Guideline Division 16520 PART 1. GENERAL 1.1 INTRODUCTION A. The intent of this specification is to provide for furnishing, installing, testing and placing into
DTL DSN Itron Ready Networked Photocontrol Specification Guideline
PART 1. GENERAL DTL DSN Itron Ready Networked Photocontrol Specification Guideline 1.1 INTRODUCTION A. The intent of this specification is to provide for furnishing, installing, testing and placing into
LFS - SFL LED Small Flood
Technical Specifications Description The LFS-SFL small flood light is the first of its kind in Lumecon s LED Fire Series. Combining a sleek fixture design with energy efficient performance allows this
LENDA. BBE LED Roadway Lighting Luminaire LENDA TM series V1: LDA-15/01/17. Performance Data:
V1: LDA-15/01/17 BBE LED Roadway Lighting Luminaire LENDA TM series LENDA Performance Data: Input Voltage: 220-240Vac / 120-277Vac 50/60Hz Wattage: 28-215W LED efficiency: >130lm/W @ 700mA Luminaire: >110lm/W
OSRAM ReliaSys D6 Area Light LED Retrofit Kit
www.sylvania.com/ledr OSRAM ReliaSys D6 Area Light LED Retrofit Kit Key Features & Benefits The D6 Area Light LED Retrofit Kit from OSRAM is an alternative to high-intensity discharge (HID) lamps up to
24" KittyHawk LED Area Light, Heritage Series
Project Name Fixture Type Catalog # 24" KittyHawk LED Area Light, Heritage Series Advanced light engine technology in a traditional housing design. Wisconsin engineering and craftsmanship utilizing premium
Performance Ratings and Certifications UL 1598 UL 8750 CSA C22.2#250.0 CSA C22.2# Performance Summary
Product Information The Highbay.C 2X is a Noribachi proprietary LED lighting solution that utilizes two compact fixtures that are attached by a steal plate in order to double the total lumen output for
LED55WPG Programmable LED Driver
Dimmable Constant Current Rev 8-9-7 Electrical Specifications Input Voltage Range: Frequency: Power Factor: Inrush Current: Input Current (Max): -77 Vac Nom. (8-35 V Min/Max) 5/6 Hz Nom. (47-63 Hz Min/Max)
PRODUCT DATA SHEETS LED Sports Lighting
PRODUCT DATA SHEETS LED Sports Lighting LED INDOOR TENNIS COURT FIXTURES INDIRECT PENDANT MOUNT REPLACEMENT FOR 1000W HID 3/4" Pipe 14.00" ** AVAILABLE ** GENERAL DESCRIPTION Neptun's High Power LED Indirect
EcoSpec Floodlight Bullet Mini
EcoSpec Floodlight Bullet Mini is a compact architectural floodlight and landscape luminaire offering superior binning and a full range of optical solutions. The EcoSpec Floodlight Bullet Mini is indoor
12" LED RoundBack Adjustable Flood Light, Heritage Series
Project Name Fixture Type Catalog # 12" LED RoundBack Adjustable Flood Light, Heritage Series Advanced light engine technology in a traditional housing design. Wisconsin engineering and craftsmanship utilizing
TITAN-HM. LED High Mast Luminaire E465685
TITAN-HM LED High Mast Luminaire E465685 Global Tech LED TITAN-HM High Mast Advantages Eliminates maintenance for 5-8 years Meets Lux requirements Up to 70% savings in energy costs compared to HID Replace
Cape Girardeau, MO 43W / 65W / 83W 131W / 165W. StreetSense LED Street Light for roadway and area illumination 190W / 252W.
Cape Girardeau, MO 43W / 65W / 83W 131W / 165W 190W / 252W for roadway and area illumination Patent Pending Features and Benefits Patented Optics Precision optics and unique mechanical design delivers
Today s Lighting Installations Require Tomorrow s Lighting Controls
Electronic Photo Controls Photo Controls with Extended Life Expectancy Today s Lighting Installations Require Tomorrow s Lighting Controls Are you installing light fixtures with extended life expectations?
Avista LED Light Engine
Patent Protected Features As LEDs change and improve, so does Avista with a second generation of LEDs, optics, and drivers. The Avista is designed to integrate into almost any post top luminaire as a powerful,
ZIPPY-168. Product Information. The Zippy-168 retrofit kit can be used in Arealight, Floodlight and Post Top lighting fixtures.
ZIPPY-168 Product Information Product Order Code: DLC Order Code: Common Replacement: ZIPPY-168-CW-MT L-C-CUS-168-REC-B-CW-MT 750-1250W MH The Zippy-168 retrofit kit can be used in Arealight, Floodlight
McGraw-Edison TT TOPTIER SITE LED
DESCRIPTION The TopTier area and site luminaire is an innovative solution that delivers an unparalleled combination of performance and visual comfort. The patented WaveStream optical technology blocks
NightFox TM Electronic Photocontrol Pro Series
NightFox TM Electronic Photocontrol Pro Series Customize our locking type photocontrols to meet your municipality, utility or co-op s specifications. Intermatic.com Customizable, budget-friendly, and maintenance-free
Savvano Decorative LED Highbay
Savvano Decorative Highbay CAT.# APPROVALS JOB TYPE SPECIFICATIONS Applications - The Hubbell Industrial Savvano is perfect for retail, school and light industrial use. Its wide variety of lumen packages
AREA LIGHT GT SERIES FEATURES & BENEFITS TECHNICAL PARAMETERS
AREA LIGHT GT SERIES The Arcadia GT Series Area Lights are high performance parking lot solution with an updated shoe box design. An efficient modular design combined with the right lens type will provide
WARRANTY FLEXOPTIX HIGH BAY/FLOOD.
www.trulygreensolutions.com 6 WATTAGES AVAILABLE IN 50W/100W/150W 200W/300W/450W EXPECTED LIFE OVER 100,000 HRS Powered by Features 5 YEAR IES FILES @ www.trulygreensolutions.com DIMMABLE Option Available
PLEDFHB-V2. Full-Body LED High Bay WARRANTY & LISTINGS FEATURES MOUNTING OPTIONS ORDERING INFORMATION. Color Temperature. Lumens Watts.
PLEDFHB-V2 215W model with option diffuse lens Full-Body LED High Bay STANDARD 25kV DAMP Surge Protection The PLEDFHB -V2 series is a group of full-body, premium-performance LED high bay luminaires These
LED Shoe Box light FEATURES AND BENEFITS: ORDERING MATRIX: LED SHOE BOX LIGHT:
ASD slim shoe box lights use up to 8% less energy than metal halide or high pressure sodium lights and put out a much nicer light. Lights up instantly, no warm-up period needed, type III distribution,
MnDOT Specification Light Emitting Diode (LED) Round Post Top Walkway Luminaire 07/15/2014
1. LISTING REQUIREMENTS MnDOT Specification Light Emitting Diode (LED) Round Post Top Walkway Luminaire 07/15/2014 1.1. The Luminaire shall be listed by a National Recognized Testing Laboratory (NRTL)
Evolve LED Area Lighting. Canopy Light (ECB)
Evolve LED Area Lighting Canopy Light (ECB) Product Features The GE Evolve LED Canopy Light family provides an energy-efficient and robust means for lighting areas with canopies, such as gas stations,
EcoSystem Digital Ballasts
EcoSystem Digital s 369339f 1 06.04.12 EcoSystem compact ballasts provide high-performance dimming for any compact uorescent application, including within an EcoSystem Lighting Control System. EcoSystem
Technical Application Guide
LED InstantFit T8 with EasySmart technology Technical Application Guide Philips is now introducing a new line of connected LED lighting products with EasySmart technology. Philips InstantFit LED T8 with
KEY BENEFITS: 2017 effinion. An LED Source Company Fairlane Farms Road, Suite 1, Wellington, FL effinion.
KEY BENEFITS: Die-cast aluminum housing with modular design, corrosion resistant High uniformity LED optics constructed of durable polycarbonate Over 20 optical lenses available 120-277VAC and 347-480VAC
LFS - SAL LED Small Area Light
Description The LFS-SAL small area light is the first of its kind in Lumecon s LED Fire Series. Combining a sleek fixture design with energy efficient performance allows this fixture to be used in parking