MEASURING AND TESTING INSTRUMENTS

Transcription

1 MEASURING AND TESTING INSTRUMENTS Whether measuring temperature, current or voltage testing the right measuring tool can facilitate the everyday work. If one wants to perform several measuring tasks at the same time, there are so-called digital multimeters, which are available in two new designs. Apart from the usual multimeter functions, the ammeter allows non-contact current measurement. Thanks to the clamp sensor, it is no longer necessary to disconnect the power circuit for the measurement. 0 Precise measurement results in the shortest possible time with the digital tape measure. The digital laser distance measuring instrument offers ergonomic technology and a very good price-performance ratio. 0

2 AC/DC voltage tester up to 0 V with LED and LCD display Incl. batteries. V AAA, LR0 Display: LCD digits, Cable length:. m LEDs (+ V, - V, V, 0 V, 0 V, 0 V, 00 V, 0 V) Overvoltage category CAT III / IV Continuity test with visual and acoustic display Tested in accordance with EN 00, EN -:00 Integrated single-pole testing Power consumption <. ma Impact-resistant modern housing Protection class: IP Bright LED display Measurement category: CAT IV 00 V, CAT III 000 V Quick single lever testing at earthed contact sockets Single-pole test > 0 0 V AC Frequency range AC 0-00 Hz Single-pole test, continuity test Voltage range - 0 V AC/DC Integrated torch Weight: 0 g 0 x x 0 AC/DC voltage tester up to 0 V with LED display Incl. batteries. V AAA, LR0 Display: LEDs Cable length:. m (+ V, - V, V, 0 V, 0 V, 0 V, 00 V, 0 V) Overvoltage category CAT III / IV Continuity test with visual and acoustic display Tested in accordance with EN 00, EN -:00 Integrated single-pole testing Power consumption <. ma Impact-resistant modern housing Protection class: IP Bright LED display Measurem. category: CAT IV 00 V, CAT III 000 V Quick single lever testing at earthed contact sockets Single-pole test > 0 0 V AC Frequency range AC, 0-00 Hz Single-pole test, continuity test Voltage range - 0 V AC/DC Integrated torch Weight: 0 g 0 x x 0 AC/DC voltage tester up to 0 V Incl. batteries. V AAA, LR0 Display: LEDs Cable length:. m (+ V, - V, V, 0 V, 0 V, 0 V, 00 V, 0 V) Overvoltage category CAT III / IV Continuity test with visual and acoustic display Tested in accordance with EN 00, EN -:00 Integrated single-pole testing Power consumption <. ma Impact-resistant modern housing Visual and acoustic diode test Bright LED display Protection class: IP Quick single lever testing at earthed contact sockets Measurement category: CAT III 00 V, CAT IV 00 V Single-pole test > 00 0 V AC Single-pole test, continuity test Frequency range: AC 0 - Hz Voltage range - 0 V AC/DC Weight: 0 g ELV 0 x x Advice and ordering: Phone: 0-0, Fax: 0 -, bestellung@cimco.de

3 AC/DC voltage tester up to 0 V Bright LED display Quick single lever testing at earthed contact sockets Impact-resistant modern housing Nominal voltages: - 0 V AC/DC Display: LEDs Frequency range: AC 0 - Hz (+ V, - V, V, 0 V, 0 V, 0 V, 00 V, 0 V) Measurement category: CAT III 00 V, CAT IV 00 V Power consumption <. ma at 0 V AC L-PE Protection class: IP Tested in accordance with EN -:00, IEC 00- Cable length:. m Works without batteries Weight: g 0 x x Continuity and circuit tester Dutest With additional torch function (continuous light) LED and buzzer Two-stage range indicator: 0-00 /0-0 k Low-resistance measuring range: 0-00 Visual by means of diode display (LED) With external voltage protection High-resistance measuring range: 0-0 k Protection class: IP 0 0 Continuity tester For resistance, semi-conductor, polarity With acoustic and visual display with resistance-dependent pitch Resistance range 0 to 00 k Test current approx.. ma External voltage display > 0 V Dielectric strength up to 00 V Power supply battery V IEC LR Weight: 0 g 00 x 0 x 00 Digital Multimeter Safety according to DIN VDE 0, EN 00, IEC 00, CAT III 00 V Visual (LED) and acoustic continuity test Device complies with the directive (00//EC) WEEE Shock- and impact-proof due to / -digit digital display with 000 digits Voltage, current and resistance measurement Temperature, capacity and frequency measurement Automatic measurement range selection protective sleeve included as standard x x 0 0

4 Digital Multimeter CAT III 00 V 000 counts Manual range Diode test Acoustic continuity test Non-contact AC voltage tester Non-contact voltage testing DC current measurement range Hold function Low-Batt display Temperature measurement Sturdy housing with soft rubber protection Torch function and display lighting 00 V high capacity fuses Scope of delivery Test leads K-type thermo sensor V battery 0 0 Digital Multimeter CAT III 00 V 000 counts Standard measurement ranges V/DC, V/AC, A/DC, A/AC Resistance Measurement jack display Diode test Manual range For professional use, in household and hobby Acoustic continuity test Battery test for. and V batteries Scope of delivery Impedance switching Test leads V battery Low-Batt display Digit height mm Sturdy housing with soft rubber protection 0 Clip-on adapter can be used in combination with any digital multimeter with a range of 00 mv/ V alternating current to carry out current measurements. The connection is made directly at the mm input jack on the multimeter. Measurement range: 0 A to 00 A at.% ± A Conversion A AC corresponds to mv Operating temperature: 0 C to 0 C Width of opening max. mm 0 AC mini ammeter CAT III 00 V Data-Hold AC current measurement (AVG) up to 00 A Auto-Power-Off function Non-contact voltage tester Voltage, frequency, temperature, capacity Scope of delivery and resistance measurement function micro batteries (type AAA) Diode test and acoustic continuity test Bag Non-contact voltage tester (NCV) Safety test leads Thermal probe K-type measurement adapter 0 Advice and ordering: Phone: 0-0, Fax: 0 -, bestellung@cimco.de

5 AC/DC-TrueRMS ammeter CAT II 00 V, CAT III 00 V Measurement functions: AC/DC current (range: A, 0 A, 00 A), AC/DC current measurement AC/DC voltage, resistance, capacity Multimeter functions Acoustic continuity test TrueRMS true effective value measurement Diode test Scope of delivery Data-Hold safety test leads Autorange in the voltage and resistance measurement range Batteries Display lighting can also be switched on Bag DC zero setting function Auto-Power-Off function Low-Batt display One-hand operation possible Integrated non-contact AC voltage tester (NCV) AC/DC mini ammeter CAT III 00 V Data-Hold AC/DC current measurement (AVG) up to 00 A Auto-Power-Off function Non-contact voltage tester Voltage, frequency, temperature, capacity and Scope of delivery resistance measurement function micro batteries (type AAA) Diode test and acoustic continuity test Bag Non-contact voltage tester (NCV) Safety test leads ZERO function Thermal probe K-type measurement adapter 0 Test probes With mm safety plug-in technique Short design, in accordance with DIN VDE 0 / EN 00 / IEC 00 Current carrying capacity up to A Measurement circuit category CAT III / 000 volts with mm tips made of stainless steel, length 0 mm -piece set grey / red and grey / black Crocodile clip set With mm safety plug-in technique Opening approx. mm in accordance with DIN VDE 0 / EN 00 / IEC 00 Current carrying capacity up to A Measurement circuit category CAT III / 000 Volt grey / red and grey / black 0 0

6 Test lead set, pieces Contains: item each of Test lead m red Test lead m black Crocodile clip grey / red Crocodile clip grey / black Test probe, grey / black Test probe, grey / red 0 Reliably displays voltages from V AC Two selectable voltage ranges/sensitivity levels The white tip forms a bright, all-round signal display Acoustic display via integrated tone generator Automatic time-controlled switch-off Splash-water-protected, robust housing Slim, insulated measuring sensor suitable for EU, UK and US electrical sockets Measurement category CAT IV 000 V Integrated torch Suitable for aircraft information systems up to 00 Hz On/Off switch with visual display Battery monitoring with visual warning 0 Cable detective Test instrument for mains copper cables, for discovering connection faults in customised data cables and complete installations. All coaxial connections with BNC/TNC connectors, USB cables and all UTP/STP cabling with or pin modular plugs can be checked in seconds for wire breaks, pin assignment and short circuits, both for individual conductors and for shielding. With visual (LED) and acoustic error signals. The Cable Detective reduces the tedious, fraught and expensive search for cable faults to a minimum. Even longer cables laid up to 00 m can be tested by a single person. In a practical belt bag, for -Volt E-block battery, with comprehensive operating instructions. x x 0 0 Voltage tester with clear transparent, impact-resistant plastic haft, VDE tested AC AC 0 Voltage tester Drei-Ve The new voltage tester from CIMCO simply sits better in the hand due to the innovative triangular handle. The Drei-Ve voltage tester has an ergonomically shaped triangular handle in transparent, impact-resistant plastic. The curved vertical contour allows the best possible contact pressure and the appropriately shaped holding clip on the handle will secure it to a shirt or overall pocket. The voltage tester is manufactured to meet the latest DIN standards and VDE/GS tested AC 00 Advice and ordering: Phone: 0-0, Fax: 0 -, bestellung@cimco.de

7 Voltage tester with clear, transparent, impact-resistance plastic haft in DIY pouch (not licensed for Germany) AC 0 Voltage tester with retractable screwdriver blade 0-0 AC 0 00 Voltage tester EURO with surrounding anti-slip protection t. - 0 AC