Programmable controller MCX06D

Size: px

Start display at page:

Download "Programmable controller MCX06D"

Georgiana Berry
5 years ago
Views:

MAKIG MODER IVIG POSSIBE Technical brochure Programmable controller Danfoss range of universal MCX programmable controllers offers the functionality and reliability you need to get the best out of

1 MAKIG MODER IVIG POSSIBE Technical brochure Programmable controller Danfoss range of universal MCX programmable controllers offers the functionality and reliability you need to get the best out of your heating, ventilation, air-conditioning and refrigeration (HVAC/R) equipment. With the MCX range, Danfoss is widening the concept of programmability and applying it to as many environments as possible is fitted with ED display, graphic CD display, or without display. It is an electronic controller that holds all the typical functionalities of MCX controllers in the compact size of 4 DI modules: programmability, connection to the CAbus local network, Modbus RS485 opto-insulated serial interface Features y 4 analog and 8 digital inputs y 3 analog and 6 digital outputs y Power supply 20/60 Vdc - 24 Vac y Remote access to data through CAbus connection for additional display (CD available) and keyboard y RTC clock for managing weekly time programs and data logging information y Modbus RS485 opto-insulated serial interface y Available with ED display, graphic CD display and without display for showing the desired information y Dimensions 4 DI modules MYK connection Modbus RS

2 General features FEATURES DESCRIPTIO 20/60 Vdc and 24 Vac ±15% 50/60 Hz. Maximum power consumption: 6 W, 9 VA Power supply Insulation between power supply and the extra-low voltage: functional DI rail mounting complying with E Plastic housing Self extinguishing V0 according to IEC and glowing/hot wire test at 960 C according to IEC Ball test 125 C according to IEC eakage current: 250 V according to IEC Operating conditions Storage conditions Integration Index of protection Period of electric stress across insulating parts Resistance to heat and fire Immunity against voltage surges Software class and structure Approvals CE: -20T60 / U: 0T55, 90% RH non-condensing -30T80, 90% RH non-condensing In Class I and/or II appliances IP40 only on the front cover ong Category D Category I Class A CE compliance: This product is designed to comply with the following EU standards: ow voltage guideline: 73/23/EEC Electromagnetic compatibility EMC: 89/336/EEC and with the following norms: E , E (immunity for residential, commercial and light-industrial environments) E , E (immunity and emission standard for industrial environments) E60730 (Automatic electrical controls for household and similar use) U approval: U file E

3 Inputs/outputs I/O TYPE UM SPECIFICATIOS Analog inputs Digital input Analog outputs Digital output TC, 0/1 V, 0/5 V 2 AI1, AI2 Analog inputs selectable via software between: TC temperature probes, default: 10 kω at 25 C pressure transducers with 0/5 V output Universal 2 AI3, AI4 Universal analog inputs selectable via software between: O/OFF (current: 20 ma) 0/1 V, 0/5 V, 0/10 V 0/20 ma, 4/20 ma TC (10 kω at 25 C) Pt V+ power supply 12 Vdc, 50 ma max for 4/20 ma transmitter (total on all outputs) 5 V+ power supply 5 Vdc, 80 ma max for 0/5 V transmitter (total on all outputs) Voltage free contact 0/10 V, PWM, PPM PWM, PPM 8 DI1, DI2, DI3, DI4, DI5, DI6, DI7, DI8 Current consumption: 5 ma 2 AO1, AO2 Analog outputs selectable via software between: pulsing output, synchronous with the line, at modulation of impulse position (PPM) or modulation of impulse width (PWM): pulsing output, at modulation of impulse width (PWM) with range from 100 Hz to 500 Hz: 0/10 Vdc non optoinsulated output, referred to the ground 10 ma maximum loads 1 AO3 Analog output selectable via software between: pulsing output, synchronous with the line, at modulation of impulse position (PPM) or modulation of impulse width (PWM): pulsing output, at modulation of impulse width (PWM) with range from 100 Hz to 500 Hz: Relay 6 Insulation between relays 1 to 5: functional Insulation between relay 6 and the other relays: reinforced Insulation between relays and the extra-low voltage parts: reinforced Total current load limit: 33 A C1-O1, C2-O2, C3-O3, C4-O4, C5-O5 ormally open contact relays characteristics of each relay: 30 Vdc / 250 Vac for resistive loads cycles 0.7 A 250 Vac for inductive load cycles with cos(phi) = 0.5 U: 250 Vac - 3 A resistive FA RA VA pilot duty cycles C6-C6-O6 Changeover contacts relay 8 A characteristics of each relay: 8 A 250 Vac for resistive loads cycles 4 A 250 Vac for inductive loads cycles with cos(phi) = 0.6 U: 240 Vac - 6 A resistive FA RA VA pilot duty cycles 3

4 Connection diagram: top and bottom board To the AI (80 ma max) To the AI (50 ma max) TC, Pt1000, O/OFF, 0/1 V, 0/5 V, 0/10 V, 0/20 ma 4/20 ma DI 1 DI 2 DI 3 DI 4 DI 5 - TOP DI 6 DI 7 DI 8 AI 1 AI 2 AO 1 AO 2 AO 3 GD 5V+ GD 12V+ AI 3 AI 4 DI 1 DI 2 DI 3 DI 4 DI 5 DI 6 DI 7 DI 8 UIVERSA UIVERSA AAOG IPUT 3-4 DIGITA IPUT BOTTOM O 1 C 1 O 2 optoinsulated RS485 AAOG I/O RS485 CA CA MMI D + C 2 D - O 3 C 3 O 4 C 4 O 5 C 5 DIGITA OUTPUT 1-5 R 120 CA H CA CA GD ID CA H CA CA GD POWER SUPPY SYC ** DIGITA OUTPUT V PWM-PPM 0-10 V PWM-PPM PWM-PPM * CAbus CAbus 1 1 SYC SYC C 6 C 6 O 6 24 Vac Vdc 8 A 8 A AO1 TC 0/5 V TC 0/5 V AO2 RS485 (Modbus) local network Power supply board 24 Vac Phase sync AO3 supervisory network *OTE: connection has to be made on the first and last local network units, make the connection as close as possible to the connector **OTE: when AO is used as synchronised output, the sync input must be in phase with the load on AO 4

5 Connection COECTORS TYPE DIMESIOS TOP BOARD Analog input 3-4 connector 7 way screw plug-in connector type Digital input 1-8 connector 10 way screw plug-in connector type Analog I/O connector 7 way screw plug-in connector type RS485 connector 3 way screw plug-in connector type CA connector 4 way screw plug-in connector type CA MMI connector 4 way Connection 2515 Series type ( ) crimping contact type: Connection ( ) section cable AWG22-28 ( mm²) instrument for the crimp type BOTTOM BOARD Digital output 1-5 connector 10 way screw plug-in connector type pitch 5 mm section cable mm² Power supply connector 2 way screw plug-in connector type Sync connector 2 way screw plug-in connector type Digital output 6 connector 3 way screw plug-in connector type pitch 5 mm section cable mm² Dimensions ED display CD display o display

6 User interface TYPE FEATURES DESCRIPTIO ED display Display ED display with two groups of digits and 18 icons CD display Digits Allarm/warning icons Other icons Meaning of the icons and digits Dimensions Display Backlight Contrast Format Active visible area Keyboard umber of keys 4 Keys function Green colour Red colour Yellow/amber colour Settled by the application software 45x17 mm ST blue transmissive White ED backlight adjustable via software Adjustable via software 98x64 dots 29.4x19.2 mm Set by the application software Ordering DESCRIPTIO, 24V, ED, S, 24V, ED, RS485, RTC, S CODE R. 080G G0109, 24V, CD, S, 24V, CD, RS485, RTC, S 080G G0112, 24V, S, 24V, RS485, RTC, S 080G G0115 (S): Single Pack ote: Single pack include standard kit connectors Industrial pack codes are avaliable on request (these do not include standard kit connectors) Accessories DESCRIPTIO /EXC06D COECTORS KIT ACCCX, WIRED COECTORS FOR TO MMIGRS, 2m CABE CODE R. 080G G0083 6

Programmable controller MCX152V

MAKIG MODER IVIG POSSIBE Technical brochure Programmable controller MCX152V MCX152V is a standard MCX electronic controller that stands on the top of MCX range thanks to its large number of input and output