Certificate of Compliance

Transcription

1 Certificate of Compliance Certificate: Master Contract: Project: Date Issued: Issued to: 206 Van Vorst St Jersey City, New Jersey Attention: Editha S. Vergara The products listed below are eligible to bear the CSA Mark shown with adjacent indicators 'C' and 'US' for Canada and US or with adjacent indicator 'US' for US only or without either indicator for Canada only. Issued by: Juan-Carlos Olivera Juan-Carlos Olivera, MSc. PRODUCTS CLASS POWER SUPPLIES - Component Type (CSA nd Ed) CLASS POWER SUPPLIES - Component Type (UL nd Ed) - Certified to U.S. Stds For details related to rating, size, configuration, etc. reference should be made to the CSA Certification Record or the descriptive report. Component type power supplies intended for use with Information Technology and Business Equipment, where the suitability of the combination is to be determined by CSA Group. Switching Power Supply, K Series and S Series, represented by YQXXXX-WZ, where: Y represents letters A F, or L Q represents letters K or S X represents a number 0-9 which represents the number of outputs and voltage ratings W represents operating ambient temperature, and Z represents a letter indicating non-safety critical options. See next page for detailed description of model designation nomenclature and electrical ratings. DQD 507 Rev Page 1

2 Certificate: Project: Master Contract: Date Issued: Rated Input Rated Output Output Power Number of outputs S Series YSXXXX-WZ K Series YKXXXX-WZ V dc V dc <100W V ac / 50-60Hz (Only LS) V dc V dc <150W V ac / 50-60Hz (Only LK) BK/CK/DK (on request) 250W 1-2 Nomenclature for 100W and 150W models: Typical Model Designation: (e.g. LK ER) Y Q X X XX - W Z a b c d ee - f gg a can be: And means input voltage range: b can be: Differences: A 8 35 V dc K The S-version is smaller than the K- B V dc S version (smaller heat sink) and has less output power. C V dc D V dc Maximum output power of K version is 150 W E V dc F V dc Maximum output power of S version is 100 W L V dc or V ac c can be: And means: d can be: And means output voltage: 1 One output 0, 1, V dc 2 Two outputs 3 12 V dc 6 or higher Customer specific models: Some with mechanical changes e.g. longer housing, other front plate, other LED s, and so on (not affecting safety). 4,5 15 V dc 6 24 V dc 7, 8 Customer specific models (not affecting safety) ee can be: And means (for models with two outputs): f can be: 00, 01 Single output models to 71 C V dc; 12 V dc to 71 C And means ambient range: DQD 507 Rev Page 2

3 Certificate: Project: Master Contract: Date Issued: V dc; 15 V dc -0, -5, -6 Customer specific models (not affecting safety) V dc; 24 V dc Other specifications and additional features (not affecting safety) gg can be: And means auxiliary functions and options: E 1 R 2 Inrush current limitation Output voltage control input P 2 Potentiometer (output voltage adjustment ) D 3 Save data signal (D0...DD, to be specified) V 3 ACFAIL signal (V2, V3) T Current sharing B.B1 Cooling plate standard case B2 Cooling plate for long case 220 mm 1... Option E is available for CK, DK, EK, LK, FS, CS, DS, ES and LS models; mandatory for all -9 model types Feature R excludes option P and vice versa Option D excludes Option V and vice versa; Option V is available for models with 5.1 V output only. Nomenclature for 250W models only: Typical Model Designation: (e.g. LK ER) Y Q X X XX - W Z a b c d ee - f gg a can be: And means input voltage range: b is: meaning: B V dc K The K-version 250 W C D V dc V dc or V dc c can be: And means: d can be: And means output voltage: 1 One output 0, 1, V dc DQD 507 Rev Page 3

4 Certificate: Project: Master Contract: Date Issued: Two outputs 3 12 V dc 6 or higher Customer specific models: Some with mechanical changes (e.g. longer housing, other front plate, other LED s, and so on), not considered safety relevant. 4,5 15 V dc 6 24 V dc 7, 8 Customer specific models (not affecting safety) ee can be: And means: Other specifications and f can be: And means ambient range: additional features (not affecting safety): 00, 01 Single output models to 71 C V dc; 12 V dc to 71 C V dc; 15 V dc -0, -5, -6 Customer specific models (not affecting safety) V dc; 24 V dc Other specifications e.g. other input voltages (not exceeding 165 V dc), other output voltages (e.g. 13V dc), and/or additional features (not affecting safety) such as different LEDs, different adjustments of options, etc gg can be: And means auxiliary functions and options: E 1 R 2 Inrush current limitation Output voltage control input P 2 Potentiometer (output voltage adjustment ) D Save data signal (D0...DD, to be specified) T Current sharing B,B1 Cooling plate standard case B2 Cooling plate for long case 220 mm 1... Option E is available for CK, DK, EK, and LK models; mandatory for all 9 model types Feature R excludes option P and vice versa. DQD 507 Rev Page 4

5 Certificate: Project: Master Contract: Date Issued: APPLICABLE REQUIREMENTS CAN/CSA-C22.2 No , +Am.1:2011 +Am.2:2014 Information Technology Equipment - Safety - Part 1: General Requirements UL Information Technology Equipment - Safety - Part 1: General Requirements CONDITIONS OF ACCEPTABILITY 1. The equipment has been evaluated for use in a Pollution Degree 2 environment and overvoltage category II environment and a maximum altitude of 2000 m. 2. Models meet fire enclosure requirements. 3. All secondary output circuits are separated from mains by reinforced insulation and rated SELV non hazardous energy levels. Some BK, CK and DK models can have hazardous energy at the output. 4. The input and output connector(s) was evaluated for factory wiring. 5. The power supply is rated class I. The power supply shall be properly bonded to the main protective bonding termination in the end product. The earth leakage current is below 3.5 ma. 6. Disconnect device is to be considered in end product. 7. Transformers TR1 (main board), TR81, TR71, TR72 (auxiliary converter board) provide reinforced insulation primary to secondary. 8. The manufacturer's recommended maximum ambient operating temperature is 71 C. DQD 507 Rev Page 5

6 Supplement to Certificate of Compliance Certificate: Master Contract: The products listed, including the latest revision described below, are eligible to be marked in accordance with the referenced Certificate. Project Date Description Product Certification History Switching Power Supply, K Series and S Series. (C/US) (transferred from and upgraded to include Am1 and Am2). DQD 507 Rev Page 1

7 CERTIFICATE No. P Order No Page 1 of 3 Product Applicant Manufacturer Factory Ratings Bel Power Solutions, s.r.o. Areal ZTS Dubnica nad Vahom Slovakia CK or CS Vdc Trade mark Model / Type Ref. Principal characteristics A sample of the product was tested and found to be in conformity with Validity Additional information CK series CS series See Test Report for output and optional ratings. The model name may be followed by up to 9 characters that can be and a numeral or letter and designate output options and auxiliary functions and customer options OFF EN :2006;A11;A1;A12;A2 This certificate documents conformity with the standards shown, and also applies as license for use of Nemkos name and certification mark. The certificate and license is valid as long as the applicable conditions are complied with, and provided that any changes to the product are notified to Nemko for acceptance prior to implementation. New standards or amendments to the standards may imply that the product design must be updated and/or that re-testing and re-certification is necessary. Additional model(s) (6) See page 2 Compliance with requirements regarding building-in, protection against electric shock and Electromagnetic Compatibility (EMC) must be checked when the equipment is built-in a completed product or forms a part of a complete system. Date of issue Nastaran Vadoodi Certification Department Nemko AS Gaustadalléen 30, P.O. Box 73 Blindern, 0314 Oslo, Norway TEL FAX info@nemko.com ENTERPRISE NUMBER NO nemko.com

8 CERTIFICATE No. P Order No Page 2 of 3 Additional model(s) Product Pos. No 1 Model / Type Ref. LK series LS series Trade mark (if different from page 1) Rating Input: LK or LS Vdc or Vac Principal characteristics See Test Report for output and optional ratings. The model name may be followed by up to 9 characters that can be and a numeral or letter and designate output options and auxiliary functions and customer options Product Pos. No 2 Model / Type Ref. BK series BS series Trade mark (if different from page 1) Rating Input: BK or BS 14-70Vdc Principal characteristics See Test Report for output and optional ratings. The model name may be followed by up to 9 characters that can be and a numeral or letter and designate output options and auxiliary functions and customer options Product Pos. No 3 Model / Type Ref. AK series AS series Trade mark (if different from page 1) Rating Input: AK or AS 8-35Vdc Principal characteristics See Test Report for output and optional ratings. The model name may be followed by up to 9 characters that can be and a numeral or letter and designate output options and auxiliary functions and customer options Product Pos. No 4 Model / Type Ref. DK series DS series Trade mark (if different from page 1) Rating Input: DK or DS Vdc Principal characteristics See Test Report for output and optional ratings. The model name may be followed by up to 9 characters that can be and a numeral or letter and designate output options and auxiliary functions and customer options Date of issue Nastaran Vadoodi Certification Department Nemko AS Gaustadalléen 30, P.O. Box 73 Blindern, 0314 Oslo, Norway TEL FAX info@nemko.com ENTERPRISE NUMBER NO nemko.com

9 CERTIFICATE No. P Order No Page 3 of 3 Product Pos. No 5 Model / Type Ref. EK series ES series Trade mark (if different from page 1) Rating Input: EK or ES Vdc Principal characteristics See Test Report for output and optional ratings. The model name may be followed by up to 9 characters that can be and a numeral or letter and designate output options and auxiliary functions and customer options Product Pos. No 6 Model / Type Ref. FK series FS series Trade mark (if different from page 1) Rating Input: FK or FS Vdc Principal characteristics See Test Report for output and optional ratings. The model name may be followed by up to 9 characters that can be and a numeral or letter and designate output options and auxiliary functions and customer options Date of issue Nastaran Vadoodi Certification Department Nemko AS Gaustadalléen 30, P.O. Box 73 Blindern, 0314 Oslo, Norway TEL FAX info@nemko.com ENTERPRISE NUMBER NO nemko.com

10 Ref. Certif. No. NO90691 IEC SYSTEM FOR MUTUAL RECOGNITION OF TEST CERTIFICATES FOR ELECTRICAL EQUIPMENT (IECEE) CB SCHEME SYSTEME CEI DACCEPTATION MUTUELLE DE CERTIFICATS DESSAIS DES EQUIPEMENTS ELECTRIQUES (IECEE) METHODE OC CB TEST CERTIFICATE CERTIFICAT D'ESSAI OC Product Produit Name and address of the applicant Nom et adresse du demandeur Name and address of the manufacturer Nom et adresse du fabricant Name and address of the factory Nom et adresse de l'usine Note: When more than one factory, please report on page 2 Note: Lorsque il y plus d'une usine, veuillez utiliser la deuxième page Ratings and principal characteristics Valeurs nominales et caractéristiques principales Trademark (if any) Marque de fabrique (si elle existe) Bel Power Solutions, s.r.o. Areal ZTS Dubnica nad Vahom Slovakia Additional information on page 2 Input: BK or BS 14-70Vdc See Test Report for output and optional ratings. Type of Manufacturer s Testing Laboratories used Type de programme du laboratoire d essais constructeur Model / Type Ref. Ref. De type BK series BS series Additional information (if necessary may also be reported on page 2) Les informations complémentaires (si nécessaire, peuvent être indiqués sur la deuxième page A sample of the product was tested and found to be in conformity with Un échantillon de ce produit a été essayé et a été considéré conforme à la As shown in the Test Report Ref. No. which forms part of this Certificate Comme indiqué dans le Rapport dessais numéro de référence qui constitue partie de ce Certificat The model name may be followed by up to 9 characters that can be and a numeral or letter and designate output options and auxiliary functions and customer options. Additional information on page 2 IEC (ed.2);am1;am This CB Test Certificate is issued by the National Certification Body Ce Certificat dessai OC est établi par l'organisme National de Certification Gaustadalléen 30 NO-0373 Oslo, Norway Date: Signature: Nastaran Vadoodi Certification Department Issued /1

11 Ref. Certif. No. NO90692 IEC SYSTEM FOR MUTUAL RECOGNITION OF TEST CERTIFICATES FOR ELECTRICAL EQUIPMENT (IECEE) CB SCHEME SYSTEME CEI DACCEPTATION MUTUELLE DE CERTIFICATS DESSAIS DES EQUIPEMENTS ELECTRIQUES (IECEE) METHODE OC CB TEST CERTIFICATE CERTIFICAT D'ESSAI OC Product Produit Name and address of the applicant Nom et adresse du demandeur Name and address of the manufacturer Nom et adresse du fabricant Name and address of the factory Nom et adresse de l'usine Note: When more than one factory, please report on page 2 Note: Lorsque il y plus d'une usine, veuillez utiliser la deuxième page Ratings and principal characteristics Valeurs nominales et caractéristiques principales Trademark (if any) Marque de fabrique (si elle existe) Bel Power Solutions, s.r.o. Areal ZTS Dubnica nad Vahom Slovakia Additional information on page 2 Input: LK or LS Vdc or Vac See Test Report for output and optional ratings. Type of Manufacturer s Testing Laboratories used Type de programme du laboratoire d essais constructeur Model / Type Ref. Ref. De type LK series LS series Additional information (if necessary may also be reported on page 2) Les informations complémentaires (si nécessaire, peuvent être indiqués sur la deuxième page A sample of the product was tested and found to be in conformity with Un échantillon de ce produit a été essayé et a été considéré conforme à la As shown in the Test Report Ref. No. which forms part of this Certificate Comme indiqué dans le Rapport dessais numéro de référence qui constitue partie de ce Certificat The model name may be followed by up to 9 characters that can be and a numeral or letter and designate output options and auxiliary functions and customer options. Additional information on page 2 IEC (ed.2);am1;am This CB Test Certificate is issued by the National Certification Body Ce Certificat dessai OC est établi par l'organisme National de Certification Gaustadalléen 30 NO-0373 Oslo, Norway Date: Signature: Nastaran Vadoodi Certification Department Issued /1

12 Ref. Certif. No. NO90693 IEC SYSTEM FOR MUTUAL RECOGNITION OF TEST CERTIFICATES FOR ELECTRICAL EQUIPMENT (IECEE) CB SCHEME SYSTEME CEI DACCEPTATION MUTUELLE DE CERTIFICATS DESSAIS DES EQUIPEMENTS ELECTRIQUES (IECEE) METHODE OC CB TEST CERTIFICATE CERTIFICAT D'ESSAI OC Product Produit Name and address of the applicant Nom et adresse du demandeur Name and address of the manufacturer Nom et adresse du fabricant Name and address of the factory Nom et adresse de l'usine Note: When more than one factory, please report on page 2 Note: Lorsque il y plus d'une usine, veuillez utiliser la deuxième page Ratings and principal characteristics Valeurs nominales et caractéristiques principales Trademark (if any) Marque de fabrique (si elle existe) Bel Power Solutions, s.r.o. Areal ZTS Dubnica nad Vahom Slovakia Additional information on page 2 Input: AK or AS 8-35Vdc See Test Report for output and optional ratings. Type of Manufacturer s Testing Laboratories used Type de programme du laboratoire d essais constructeur Model / Type Ref. Ref. De type AK series AS series Additional information (if necessary may also be reported on page 2) Les informations complémentaires (si nécessaire, peuvent être indiqués sur la deuxième page A sample of the product was tested and found to be in conformity with Un échantillon de ce produit a été essayé et a été considéré conforme à la As shown in the Test Report Ref. No. which forms part of this Certificate Comme indiqué dans le Rapport dessais numéro de référence qui constitue partie de ce Certificat The model name may be followed by up to 9 characters that can be and a numeral or letter and designate output options and auxiliary functions and customer options. Additional information on page 2 IEC (ed.2);am1;am This CB Test Certificate is issued by the National Certification Body Ce Certificat dessai OC est établi par l'organisme National de Certification Gaustadalléen 30 NO-0373 Oslo, Norway Date: Signature: Nastaran Vadoodi Certification Department Issued /1

13 Ref. Certif. No. NO90694 IEC SYSTEM FOR MUTUAL RECOGNITION OF TEST CERTIFICATES FOR ELECTRICAL EQUIPMENT (IECEE) CB SCHEME SYSTEME CEI DACCEPTATION MUTUELLE DE CERTIFICATS DESSAIS DES EQUIPEMENTS ELECTRIQUES (IECEE) METHODE OC CB TEST CERTIFICATE CERTIFICAT D'ESSAI OC Product Produit Name and address of the applicant Nom et adresse du demandeur Name and address of the manufacturer Nom et adresse du fabricant Name and address of the factory Nom et adresse de l'usine Note: When more than one factory, please report on page 2 Note: Lorsque il y plus d'une usine, veuillez utiliser la deuxième page Ratings and principal characteristics Valeurs nominales et caractéristiques principales Trademark (if any) Marque de fabrique (si elle existe) Bel Power Solutions, s.r.o. Areal ZTS Dubnica nad Vahom Slovakia Additional information on page 2 Input: EK or ES Vdc See Test Report for output and optional ratings. Type of Manufacturer s Testing Laboratories used Type de programme du laboratoire d essais constructeur Model / Type Ref. Ref. De type EK series ES series Additional information (if necessary may also be reported on page 2) Les informations complémentaires (si nécessaire, peuvent être indiqués sur la deuxième page A sample of the product was tested and found to be in conformity with Un échantillon de ce produit a été essayé et a été considéré conforme à la As shown in the Test Report Ref. No. which forms part of this Certificate Comme indiqué dans le Rapport dessais numéro de référence qui constitue partie de ce Certificat The model name may be followed by up to 9 characters that can be and a numeral or letter and designate output options and auxiliary functions and customer options Additional information on page 2 IEC (ed.2);am1;am This CB Test Certificate is issued by the National Certification Body Ce Certificat dessai OC est établi par l'organisme National de Certification Gaustadalléen 30 NO-0373 Oslo, Norway Date: Signature: Nastaran Vadoodi Certification Department Issued /1

14 Ref. Certif. No. NO90695 IEC SYSTEM FOR MUTUAL RECOGNITION OF TEST CERTIFICATES FOR ELECTRICAL EQUIPMENT (IECEE) CB SCHEME SYSTEME CEI DACCEPTATION MUTUELLE DE CERTIFICATS DESSAIS DES EQUIPEMENTS ELECTRIQUES (IECEE) METHODE OC CB TEST CERTIFICATE CERTIFICAT D'ESSAI OC Product Produit Name and address of the applicant Nom et adresse du demandeur Name and address of the manufacturer Nom et adresse du fabricant Name and address of the factory Nom et adresse de l'usine Note: When more than one factory, please report on page 2 Note: Lorsque il y plus d'une usine, veuillez utiliser la deuxième page Ratings and principal characteristics Valeurs nominales et caractéristiques principales Trademark (if any) Marque de fabrique (si elle existe) Bel Power Solutions, s.r.o. Areal ZTS Dubnica nad Vahom Slovakia Additional information on page 2 Input: DK or DS Vdc See Test Report for output and optional ratings. Type of Manufacturer s Testing Laboratories used Type de programme du laboratoire d essais constructeur Model / Type Ref. Ref. De type DK series DS series Additional information (if necessary may also be reported on page 2) Les informations complémentaires (si nécessaire, peuvent être indiqués sur la deuxième page A sample of the product was tested and found to be in conformity with Un échantillon de ce produit a été essayé et a été considéré conforme à la As shown in the Test Report Ref. No. which forms part of this Certificate Comme indiqué dans le Rapport dessais numéro de référence qui constitue partie de ce Certificat The model name may be followed by up to 9 characters that can be and a numeral or letter and designate output options and auxiliary functions and customer options. Additional information on page 2 IEC (ed.2);am1;am This CB Test Certificate is issued by the National Certification Body Ce Certificat dessai OC est établi par l'organisme National de Certification Gaustadalléen 30 NO-0373 Oslo, Norway Date: Signature: Nastaran Vadoodi Certification Department Issued /1

15 Ref. Certif. No. NO90696 IEC SYSTEM FOR MUTUAL RECOGNITION OF TEST CERTIFICATES FOR ELECTRICAL EQUIPMENT (IECEE) CB SCHEME SYSTEME CEI DACCEPTATION MUTUELLE DE CERTIFICATS DESSAIS DES EQUIPEMENTS ELECTRIQUES (IECEE) METHODE OC CB TEST CERTIFICATE CERTIFICAT D'ESSAI OC Product Produit Name and address of the applicant Nom et adresse du demandeur Name and address of the manufacturer Nom et adresse du fabricant Name and address of the factory Nom et adresse de l'usine Note: When more than one factory, please report on page 2 Note: Lorsque il y plus d'une usine, veuillez utiliser la deuxième page Ratings and principal characteristics Valeurs nominales et caractéristiques principales Trademark (if any) Marque de fabrique (si elle existe) Bel Power Solutions, s.r.o. Areal ZTS Dubnica nad Vahom Slovakia Additional information on page 2 Input: FK or FS Vdc See Test Report for output and optional ratings. Type of Manufacturer s Testing Laboratories used Type de programme du laboratoire d essais constructeur Model / Type Ref. Ref. De type FK series FS series Additional information (if necessary may also be reported on page 2) Les informations complémentaires (si nécessaire, peuvent être indiqués sur la deuxième page A sample of the product was tested and found to be in conformity with Un échantillon de ce produit a été essayé et a été considéré conforme à la As shown in the Test Report Ref. No. which forms part of this Certificate Comme indiqué dans le Rapport dessais numéro de référence qui constitue partie de ce Certificat The model name may be followed by up to 9 characters that can be and a numeral or letter and designate output options and auxiliary functions and customer options. Additional information on page 2 IEC (ed.2);am1;am This CB Test Certificate is issued by the National Certification Body Ce Certificat dessai OC est établi par l'organisme National de Certification Gaustadalléen 30 NO-0373 Oslo, Norway Date: Signature: Nastaran Vadoodi Certification Department Issued /1

16 Ref. Certif. No. NO90697 IEC SYSTEM FOR MUTUAL RECOGNITION OF TEST CERTIFICATES FOR ELECTRICAL EQUIPMENT (IECEE) CB SCHEME SYSTEME CEI DACCEPTATION MUTUELLE DE CERTIFICATS DESSAIS DES EQUIPEMENTS ELECTRIQUES (IECEE) METHODE OC CB TEST CERTIFICATE CERTIFICAT D'ESSAI OC Product Produit Name and address of the applicant Nom et adresse du demandeur Name and address of the manufacturer Nom et adresse du fabricant Name and address of the factory Nom et adresse de l'usine Note: When more than one factory, please report on page 2 Note: Lorsque il y plus d'une usine, veuillez utiliser la deuxième page Ratings and principal characteristics Valeurs nominales et caractéristiques principales Trademark (if any) Marque de fabrique (si elle existe) Bel Power Solutions, s.r.o. Areal ZTS Dubnica nad Vahom Slovakia Additional information on page 2 CK or CS Vdc See Test Report for output and optional ratings. Type of Manufacturer s Testing Laboratories used Type de programme du laboratoire d essais constructeur Model / Type Ref. Ref. De type CK series CS series Additional information (if necessary may also be reported on page 2) Les informations complémentaires (si nécessaire, peuvent être indiqués sur la deuxième page A sample of the product was tested and found to be in conformity with Un échantillon de ce produit a été essayé et a été considéré conforme à la As shown in the Test Report Ref. No. which forms part of this Certificate Comme indiqué dans le Rapport dessais numéro de référence qui constitue partie de ce Certificat The model name may be followed by up to 9 characters that can be and a numeral or letter and designate output options and auxiliary functions and customer options. Additional information on page 2 IEC (ed.2);am1;am This CB Test Certificate is issued by the National Certification Body Ce Certificat dessai OC est établi par l'organisme National de Certification Gaustadalléen 30 NO-0373 Oslo, Norway Date: Signature: Nastaran Vadoodi Certification Department Issued /1

17 Test Report issued under the responsibility of TEST REPORT IEC Information technology equipment Safety Part 1: General requirements Report Number.... : Date of issue... : 05 February 2016 Total number of pages Applicant s name... : Address... : Bel Fuse, Inc.,, Test specification: Standard... : IEC :2005 (Second Edition) + Am 1: Am 2:2013 Test procedure... : Non-standard test method... : CB-Scheme N/A Test Report Form No.... : Test Report Form(s) Originator... : IEC60950_1F SGS Fimko Ltd Master TRF... : Dated Copyright 2014 IEC System of Conformity Assessment Schemes for Electrotechnical Equipment and Components (IECEE System). All rights reserved. This publication may be reproduced in whole or in part for non-commercial purposes as long as the IECEE is acknowledged as copyright owner and source of the material. IECEE takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context. This report is not valid as a CB Test Report unless signed by an approved CB Testing Laboratory and appended to a CB Test Certificate issued by an NCB in accordance with IECEE 02. General disclaimer: The test results presented in this report relate only to the object tested. This report shall not be reproduced, except in full, without the written approval of the Issuing CB Testing Laboratory. The authenticity of this Test Report and its contents can be verified by contacting the NCB, responsible for this Test Report. This Test Report, when bearing the Nemko name and logo is only valid when issued by a Nemko laboratory, or by a laboratory having special agreement with Nemko.

18 Page 2 of Test item description... : Trade Mark... : Manufacturer... : Model/Type reference... : Ratings... : Same as Applicant AKxxxx-zw ASxxxx-zw BKxxxx-zw BSxxxx-zw CKxxxx-zw CSxxxx-zw DKxxxx-zw DSxxxx-zw EKxxxx-zw ESxxxx-zw FKxxxx-zw FSxxxx-zw LKxxxx-zw LSxxxx-zw x can be 0 thru 9 designating output options z can be 0,5,6,7,9 designating ambient rating W can be any combination of numbers, letters or blank, designating additional functions or options (up to 4 characters) For more details see General Product Information. Input: A 8-35Vdc B Vdc C Vdc D Vdc E Vdc F Vdc L Vdc or Vac see General Product Information for output an optional ratings Testing procedure and testing location: CB Testing Laboratory: Testing location/ address... : Nemko, Inc Faraday Avenue, Carlsbad CA, 92008, Associated CB Testing Laboratory: Testing location/ address... : Tested by (name + signature)... : George Daverin Approved by (name + signature)... : Jeff Busch TRF No. IEC60950_1F

19 Page 3 of Report History: Original report Add G option to model number. Update National Deviations. List of Attachments (including a total number of pages in each attachment): Attachment 1: Attachment 2: European Group Differences and National Deviations pages Documented deviations contain individual national documents for several European countries that are included in the European Group Deviations. The European Group Difference: EN60950:2006/A11:2009/A1:2010/A12:2011/A2:2013 are considered Normative. The individual national documents (Denmark, Finland, Germany, Ireland, Norway, Spain, Sweden, Switzerland and United Kingdom) are considered informative and included at the manufacturer s request. Miscellaneous Documentation, e.g. Photos, PWB Layout, Schematic etc pages (Not for publication Engineering use only) Summary of testing General Power supply All comments relate to all models, unless specifically stated. The equipment is an enclosed, Class I switch mode power supply with universal AC input and DC input, and multiple DC voltage outputs for building-in. This report covers multiple models and all comments / tests apply to all models unless otherwise indicated. 1.5, 3.2.5; Power supply cord set. A power supply cord set is not provided with the power supply. A power supply cord set, complying with the national regulations of the country in which the product is to be sold, shall be provided with the end-use equipment ; Safety instructions. Instructions and equipment markings related to safety are to be provided in a language, which is acceptable in the country in which the equipment is to be sold. English language verified ; IT power distribution systems. The equipment complies with the requirements for connection to the Norwegian IT power systems. The following information should be given (but is not required) in the installation instruction: This product is also designed for IT power system with Phase to Phase voltage 230V ; Number and location of protective devices. In Norway, IT power distribution system is used. Equipment with a single protective device is accepted in Norway. Other countries may have additional requirements ; Warning to service personnel. After operation of the protective device, the equipment is still under voltage if it is connected to an IT-power system. A warning is required for service personnel. TRF No. IEC60950_1F

20 Page 4 of Norway does not require this warning. TRF No. IEC60950_1F

21 Page 5 of Summary of testing: Tests performed (name of test and test clause): 1) Input Test ) Durability Test ) Energy hazards-d.c. mains supplies ) SELV Reliability Test ) Earthing test, earth trace test(ul PAG) ) Humidity Test ) Working Voltage Measurement ) Hazardous Voltage Measurement ) Hot swap Test ) Heating Test )Ball pressure test ) Electric Strength Test ) Component Failure Test ) Abnormal Operation Test ) PS Output Overload and Short Test Testing location: See page 2 Summary of compliance with National Differences: List of countries addressed Austria (AT), Australia (AU), Canada (CA), China (CH) Denmark (DK), Finland (FI), Germany (DE), Ireland (IE), Israel (IS), Korea (KR), Norway (NO), Slovenia (SI), Spain (ES), Sweden (SE), Switzerland (CH), United Kingdom (GB), United States of America (US) The product fulfils the requirements of : EN : A11: A1: A12: A2:2013 TRF No. IEC60950_1F

22 Page 6 of Copy of marking plate: The artwork below may be only a draft. The use of certification marks on a product must be authorized by the respective Certification Bodies that own these marks. TRF No. IEC60950_1F

23 Page 7 of Calibration Measurement uncertainty Evaluation of result All instruments used in the tests given in this test report are calibrated and traceable to national or international standards. Further information about traceability will be given on request. Measurement uncertainties are calculated for all instruments and instrument set-ups given in this report. Calculation are based in the principles given in the standard EZ-4/02 (Dec.1999), IEC Guide 155:2007, Nemko routine L227 and other relevant internal Nemko-procedures. Further information about measurement uncertainties will be given on request. If not explicitly stated otherwise in the standard, the test is passed if the measured value is equal to or below (above) the limit line, regardless of the measurement uncertainty. If the measured value is above (below) the limit line, the test is not passed-ref IEC Guide 115:2007, and Nemko routine L220. The instrumentation accuracy is within limits agreed by IECEE-CTL (ref. Nemko routine L227) TRF No. IEC60950_1F

24 Page 8 of Test item particulars: Equipment mobility... : [] movable [] hand-held [] transportable [] stationary [ X ] for building-in [] direct plug-in Connection to the mains... : Operating condition... : Access location... : [] pluggable equipment [] type A [] type B [] permanent connection [] detachable power supply cord [] non-detachable power supply cord [ X ] not directly connected to the mains [ X ] continuous [] rated operating / resting time: [] operator accessible [] restricted access location [ X ] service access location Over voltage category (OVC)...: [] OVC I [ X ] OVC II [] OVC III [] OVC IV [] other: Mains supply tolerance (%) or absolute mains supply values... : Tested for IT power systems... : IT testing, phase-phase voltage (V)... : 8-385Vdc/85-264Vac [ X ] Yes ( Norway) [] No AC rated: Norway (only), 230 Vac phase to phase voltage Class of equipment... : [ X ] Class I [] Class II [] Class III [] Not classified Considered current rating of protective device as part of the building installation (A)... : 16A (IEC), 20A () Pollution degree (PD)... : [] PD 1 [ X ] PD 2 [] PD 3 IP protection class... : IP30 Altitude during operation (m)... : 2000 Altitude of test laboratory (m)... : 300 Mass of equipment (kg)... : Approx. 1.2 Temperature, Ambient ( C)... : 71 C maximum Possible test case verdicts: - test case does not apply to the test object... : N/A - test object does meet the requirement... : P (Pass) - test object does not meet the requirement... : F (Fail) Testing... : Original report Date of receipt of test item... : October 2015 Date (s) of performance of tests... : October 2015 TRF No. IEC60950_1F

25 Page 9 of General remarks: "(See Enclosure #)" refers to additional information appended to the report. "(See appended table)" refers to a table appended to the report. Throughout this report a comma / point is used as the decimal separator. Manufacturer s Declaration per sub-clause of IECEE 02: The application for obtaining a CB Test Certificate includes more than one factory location and a declaration from the Manufacturer stating that the sample(s) submitted for evaluation is (are) representative of the products from each factory has been provided... When differences exist; they shall be identified in the General product information section. Name and address of factory (ies)... : Bel Power Solutions s.r.o ArealZTS Dubnica n.vahom c Dubnica nad Vahom SLOVAKIA Yes Not applicable General product information: This test report replaces Nemko test report Ref. No , with appended CB certificate No.NO This test report includes the addition of G options which indicates ROHS Compliance. For continuity, the entire report has been reissued, including the additional evaluation highlighted in Bold text. For continuity, data from the original Nemko test report Ref. No is included in this report, along with the additional evaluation referenced. Switch mode Power Supply without PFC. Functional description: The input voltage is fed via an input fuse, an input filter and an inrush current limiter to the input capacitor. This capacitor sources a single forward converter with either single or double output. Each output is powered by a separate secondary winding of the main transformer. The resultant voltages are rectified and their ripples smoothed by a power choke and output filter. The control logic senses the main output voltage Uo1 and generates with respect to the maximum admissible output current the control signal for the primary switching transistor. The second output of double output units is controlled by the main output but has independent current limitation. An independent auxiliary converter delivers the energy for start-up and auxiliary functions. Model nomenclature: Nomenclature for 100W and 150W models ad cdee-fgg (e.g.:lk ER) a can be: And means input voltage range: b can be: Differences: A 8-35Vdc K The S-version is smaller than the K B Vdc S version(smaller heat sink) and has less output power C Vdc Maximum output power of K version TRF No. IEC60950_1F

26 Page 10 of D Vdc is 150W Maximum output power of S version E Vdc is 100W F Vdc L Vdc or Vac c can be: And means: d can be: And means output voltage: 1 One output 0,1,2 5.1Vdc 2 Two outputs 3 12 Vdc 6 or higher Customer specific models: Some with mechanical changes (e.g. longer housing, other front plate, other LED s and so on). Not considered safety relevant ee can be: And means (for models with two outputs): 4,5 15 Vdc 6 24 Vdc 7,8 Customer specific models(not safety relevant) f can be: 00, 01 Single output models to 71 C 20 12Vdc;12Vdc to 71 C And means ambient range: 40 15Vdc;15Vdc -0,-5,-6 Customer specific models(not safety relevant) 60 24Vdc;24Vdc Other specifications and additional features(not safety relevant) gg can be: And means auxiliary functions and options: E 1 R 2 P 2 D 3 V 3 T Inrush current limitation Output voltage control input Potential meter(output voltage adjustment) Save data signal(d0 DD, to be specified) ACFAIL signal(v2,v3) Current sharing B, B1 Cooling plate standard case B2 Cooling plate for long case 220mm G ROHS Compliance 1 Option E is available for CK, DK, EK, LK, FS, CS, DS, ES and LS models, mandatory for all-9 model types 2 Feature R excludes option P and vice versa 3 Option D excludes option V and vice versa, Option V is available for models with 5.1V output only. TRF No. IEC60950_1F

27 Page 11 of Nomenclature for 250W models only ab cdee-fgg (e.g.:bk R) a can be: And means input voltage range: b is: Means: B Vdc K The K-version 250W C D Vdc Vdc or Vdc c can be: And means: d can be: And means output voltage: 1 One output 0,1,2 5.1Vdc 2 Two outputs 3 12 Vdc 6 or higher Customer specific models: Some with mechanical changes (e.g. longer housing, other front plate, other LED s and so on). Not considered safety relevant 4,5 15 Vdc 6 24 Vdc 7,8 Customer specific models(not safety relevant) ee can be: And means: Other specifications and additional features(not safety relevant) f can be: And means ambient range: 00, 01 Single output models to 71 C 20 12Vdc;12Vdc to 71 C 40 15Vdc;15Vdc -0,-5,-6 Customer specific models(not safety relevant) 60 24Vdc;24Vdc Other specifications, e.g.other input voltage (not exceeding 165Vdc),other output voltages(e.g.13vdc).and/or additional features(not safety relevant) such as LEDs, different adjustments of options, etc. gg can be: And means auxiliary functions and options E 1 R 2 P 2 D T Inrush current limitation Output voltage control input Potential meter(output voltage adjustment) Save data signal(d0 DD, to be specified) Current sharing B, B1 Cooling plate standard case B2 Cooling plate for long case 220mm 1 Option E is available for CK,DK,EK and LK models, mandatory for all-9 model types 2 Feature R excludes option P and vice versa TRF No. IEC60950_1F

28 Page 12 of Summary of testing: The component was tested according to the standard IEC :2005 (2nd Edition) +A1:2009 and/or EN : A1: A11: A12: The products with AC rating were tested on a 20 A () and a 16 A (IEC) branch circuit in series. External circuit breaker did not open during the testing. The unit is approved for TN mains star connections and IT mains with 230 Vac phase to phase voltage. The unit provides internally one fuse in line. For dc testing a 80A DC source was used. 2. All secondary output circuits are separated from mains by reinforced insulation and rated SELV nonhazardous energy levels. Some BK, CK and DK models can have hazardous energy at the output. 3. Safety Instructions with fuse rating: provided (see enclosure no. 4) 4. The input and output connector was evaluated for factory wiring. 5. The power supply is rated class I. The power supply shall be properly bonded to the main protective bonding termination in the end product. The earth leakage current is below 3.5 ma. 6. The equipment has been evaluated for use in a Pollution Degree 2 and overvoltage category II environment and a maximum altitude of 2000 m. 7. Disconnect device is considered as end product consideration. 8. Transformers TR1 (main board), TR81, TR71, TR72 (auxiliary converter board) provide reinforced insulation primary to secondary. 9. The unit is evaluated for a maximum ambient temperature of 71 C. 10. Unit fulfils requirements for fire enclosure. Abbreviations used in the report: - normal conditions...n.c. - single fault conditions... S.F.C - functional insulation... OP - basic insulation... BI - double insulation... DI - supplementary insulation... SI - between parts of opposite polarity... BOP - reinforced insulation... RI Indicate used abbreviations (if any):... None TRF No. IEC60950_1F