TEST REPORT IEC Part 2: Particular requirements: Section Thirteen d.c. or a.c. supplied electronic controlgear for LED modules
|
|
- Della Franklin
- 6 years ago
- Views:
Transcription
1 Test Report issued under the responsibility of: TEST REPORT IEC Part 2: Particular requirements: Section Thirteen d.c. or a.c. supplied electronic controlgear for LED modules Report Number....: Date of issue...: Total number of pages Applicant s name...: Darfon Electronics Corp. Address...: 167, Shanying Road, Gueishan, Taoyuan 33341, Taiwan R.O.C. Test specification: Standard...: IEC :2006 used in conjunction with IEC (Second Edition) : 2007+A1:2010 Test procedure...: CB Scheme Non-standard test method..: N/A Test Report Form No....: IEC61347_2_13C Test Report Form(s) Originator...: Intertek Semko AB Master TRF...: Copyright 2011 IEC System for Conformity Testing and Certification of Electrical Equipment (IECEE), Geneva, Switzerland. All rights reserved. This publication may be reproduced in whole or in part for non-commercial purposes as long as the IECEE is acknowledged as copyright owner and source of the material. IECEE takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context. If this Test Report Form is used by non-iecee members, the IECEE/IEC logo and the reference to the CB Scheme procedure shall be removed. This report is not valid as a CB Test Report unless signed by an approved CB Testing Laboratory and appended to a CB Test Certificate issued by an NCB in accordance with IECEE 02. Test item description... : LED DRIVER Trade Mark... : Manufacturer... : Same as applicant Model/Type reference... : MDC-120-x (x=0350, 0500, 0700, 1050) Ratings... : I/P: Vac, 50/60Hz, 1.5A O/P: See General Product Information for details. ta = 60 C, tc = 90 C, Class I
2 Page 2 of 67 Report No. : Testing procedure and testing location: CB Testing Laboratory: KTL (Korea Testing Laboratory) 87, Digital-ro 26-gil, Guro-gu, Seoul, , Korea Associated CB Laboratory: Jae-hoon Jung Jinwook Kwon Testing procedure: TMP Testing procedure: WMT Witnessed by (+ signature)...: Testing procedure: SMT Supervised by (+ signature)...: Testing procedure: RMT Tested by (name + signature)... : Approved by (+ signature)... : Supervised by (+ signature)... :
3 Page 3 of 67 Report No. : List of Attachments (including a total number of pages in each attachment): ATTACHMENT #1: Testing according to EN (3 pages) ATTACHMENT #2: National Differences (2 pages) ATTACHMENT #3: Photographs (3 pages) ATTACHMENT #4: PCB Layout (1 page) Summary of testing: Tests performed (name of test and test clause): All applicable tests were performed. Details see appended clauses and tables. The equipment operated at maximum specified LED module with maximum power condition. The test samples are pre-production without serial numbers. The maximum operational ambient temperature as specified by the manufacturer is ta = 60 C. The maximum operation temperature of the case as specified by the manufacturer is tc =90 C. The equipment has been evaluated with IP65 and IP67. Double M test requirement is verified according to DIN VDE as follows: Heating test was computed according to the installation. - During temp-rise test, the mounting surface and 95 C. - During abnormal-test, the mounting surface and 110 C. Tests were performed in a wooden test box with the following dimension: Testing location: All tests as described in Test Case and Measurement Sections were performed at the laboratory described on page 2. Unless otherwise specified, during all tests following conditions applied: - All applicable tests were performed in label side upward. - With sealing compound material, see component list for the details. - The highest load declared by manufacturer used. Unless otherwise specified, tests were performed on model MDC and MDC to represent other similar models.
4 Test Report issued under the responsibility of: TEST REPORT IEC Part 2: Particular requirements: Section Thirteen d.c. or a.c. supplied electronic controlgear for LED modules Report Number....: Date of issue...: Total number of pages pages Applicant s name...: Darfon Electronics Corp. Address...: 167, Shanying Road, Gueishan, Taoyuan 33341, Taiwan R.O.C. Test specification: Standard...: IEC :2006 used in conjunction with IEC (Second Edition) : 2007+A1:2010 Test procedure...: CB Scheme Non-standard test method..: N/A Test Report Form No....: IEC61347_2_13C Test Report Form(s) Originator...: Intertek Semko AB Master TRF...: Copyright 2011 IEC System for Conformity Testing and Certification of Electrical Equipment (IECEE), Geneva, Switzerland. All rights reserved. This publication may be reproduced in whole or in part for non-commercial purposes as long as the IECEE is acknowledged as copyright owner and source of the material. IECEE takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context. If this Test Report Form is used by non-iecee members, the IECEE/IEC logo and the reference to the CB Scheme procedure shall be removed. This report is not valid as a CB Test Report unless signed by an approved CB Testing Laboratory and appended to a CB Test Certificate issued by an NCB in accordance with IECEE 02. Test item description... : LED DRIVER Trade Mark... : Manufacturer...: Same as applicant Model/Type reference...: MDC-120-x (x= 1400, 2450, 2800, 3500, 4450) Ratings...: I/P: Vac, 50/60Hz, 1.5A O/P: See General Product Information for details. ta = 60 C, tc = 90 C, Class I
5 Page 2 of 69 Report No.: Testing procedure and testing location: CB Testing Laboratory: KTL (Korea Testing Laboratory) 87, Digital-ro 26-gil Guro-gu, Seoul, , Korea Associated CB Laboratory: Yong-Rho Lee Jinwook Kwon Testing procedure: TMP Testing procedure: WMT Witnessed by (+ signature)...: Testing procedure: SMT Supervised by (+ signature)...: Testing procedure: RMT Tested by (name + signature)... : Approved by (+ signature)... : Supervised by (+ signature)... :
6 Page 3 of 69 Report No.: List of Attachments (including a total number of pages in each attachment): ATTACHMENT #1: Testing according to EN (3 pages) ATTACHMENT #2: National Differences (2 pages) ATTACHMENT #3: Photographs (6 pages) Summary of testing: Tests performed (name of test and test clause): All applicable tests were performed. Details see appended clauses and tables. The equipment operated at maximum specified LED module with maximum power condition. The test samples are pre-production without serial numbers. The maximum operational ambient temperature as specified by the manufacturer is ta = 60 C. The maximum operation temperature of the case as specified by the manufacturer is tc =90 C. The equipment has been evaluated with IP65 and IP67. Double M test requirement is verified according to DIN VDE as follows: Heating test was computed according to the installation. - During temp-rise test, the mounting surface and 95 C. - During abnormal-test, the mounting surface and 110 C. Tests were performed in a wooden test box with the following dimension: Testing location: All tests as described in Test Case and Measurement Sections were performed at the laboratory described on page 2. Unless otherwise specified, during all tests following conditions applied: - All applicable tests were performed in label side upward. - With sealing compound material, see component list for the details. - The highest load declared by manufacturer used. Unless otherwise specified, tests were performed on model MDC and MDC to represent other similar models.
TEST REPORT IEC Safety requirements for electrical equipment for measurement, control, and laboratory use Part 1: General requirements
Test Report issued under the responsibility of: TEST REPORT IEC 61010-1 Safety requirements for electrical equipment for measurement, control, and laboratory use Part 1: General requirements Report Number....
More informationTEST REPORT IEC or ISO Reference Number Title of the IEC or ISO Standard
IECEE OD-2020-F8:2018 IEC 2018 Ed.1.0 Cyber Security TRF Template 2018-06-05 Test Report issued under responsibility of: TEST REPORT IEC or ISO Reference Number Title of IEC or ISO Standard Report Number....
More informationTEST REPORT IEC Safety of household and similar electrical appliances
Test Report issued under the responsibility of: TEST REPORT IEC 60335-1 Safety of household and similar electrical appliances Report Number.... : T211-0884/17 Date of issue... : 2017-11-20 Total number
More informationRef. Certificate No. KR-KTL-6008 IEC SYSTEM FOR MUTUAL RECOGNITION OF TEST CERTIFICATES FOR ELECTRICAL EQUIPMENT (IECEE) CB SCHEME
Ref. Certificate No. KR-KTL-6008 IEC SYSTEM FOR MUTUAL RECOGNITION OF TEST CERTIFICATES FOR ELECTRICAL EQUIPMENT (IECEE) CB SCHEME CB TEST CERTIFICATE SYSTEM CEI D'ACCEPTATION MUTUELLE DE CERTIFICATS D'ESSAIS
More informationTEST REPORT IEC Information technology equipment Safety Part 1: General requirements
Test Report issued under the responsibility of www.nemko.com TEST REPORT IEC 60950-1 Information technology equipment Safety Part 1: General requirements Report Number....: 285604 Date of issue...: 2015-09-25
More informationIEC60601_1K. Medical electrical equipment Part 1: General requirements for basic safety and essential performance
Page 1 of 150 Report No.: E349607-D1006-1/A0/C0-CB CB - IEC REPORT: Test Report issued under the responsibility of: IEC 60601-1 Medical electrical equipment Part 1: General requirements for basic safety
More informationTEST REPORT IEC Information technology equipment Safety Part 1: General requirements
Test Report issued under the responsibility of: TEST REPORT IEC 60950-1 Information technology equipment Safety Part 1: General requirements Report Number.... : 30581080.014 Date of issue... : 02/12/2016
More informationTEST REPORT IEC Information technology equipment - Safety - Part 1: General requirements
Issue Date: 2012-08-06 Page 1 of 10 Report Reference # E142692-A138-CB-3 Test Report issued under the responsibility of: Report Reference No... : TEST REPORT IEC 60950-1 Information technology equipment
More informationIEC Medical electrical equipment Part 1: General requirements for basic safety and essential performance
Test Report issued under the responsibility of: IEC 60601-1 Medical electrical equipment Part 1: General requirements for basic safety and essential performance Report Reference No.... : 4787490334 Date
More informationTEST REPORT IEC Self-Ballasted LED-Lamp for general lighting services by voltage > 50V Safety specifications
Test Report issued under the responsibility of: TEST REORT IEC 62560 Self-Ballasted LED-Lamp for general lighting services by voltage > 50V Safety specifications Report Number....3155304.50 Date of issue...
More informationTEST REPORT EN Alarm systems Intrusion systems Part 6: Power supplies
age 1 of 44 Report No. 100798960MIN-001 TEST REORT EN 50131-6 Alarm systems Intrusion systems art 6: ower supplies Report Reference No.... : Compiled by (+ signature)... : Approved by (+ signature)...
More informationPage 1 of 2. Power Supply SL POWER ELECTRONICS CORP 6050 KING DRIVE, BLDG A VENTURA CA 93003, USA
Page 1 of 2 US/14113A/UL Power Supply SL POWER ELECTRONICS CORP 6050 KING DRIVE, BLDG A VENTURA CA 93003, USA SL POWER ELECTRONICS CORP. 6050 KING DRIVE, BLDG A VENTURA CA 93003, USA SHENZHEN POWERLD ELECTRONIC
More informationIEC System of Conformity Assessment Schemes for Electrotechnical Equipment and Components (IECEE System)
IECEE 02 Edition 16.0 2016-06-01 IECEE PUBLICATION IEC System of Conformity Assessment Schemes for Electrotechnical Equipment and Components (IECEE System) Rules of Procedure CB Scheme Scheme of the IECEE
More informationLOVAG Certification for Low Voltage Industrial Equipment
SEC(LOVAG)16.010 LOVAG Certification for Low Voltage Industrial Equipment Presented by Dr. Horst HUTHMANN Secretary to LOVAG MEE 2016 Seminars Agenda Who are we? What are we doing? IEC 61439 Focus Useful
More informationIEC60601_1K. Medical electrical equipment Part 1: General requirements for basic safety and essential performance
Page 1 of 300 Report No.: E349607-D1000-2/A1/C0-ULCB CB - IEC REPORT: Test Report issued under the responsibility of: IEC 60601-1 Medical electrical equipment Part 1: General requirements for basic safety
More informationUL TEST REPORT AND PROCEDURE
Issue Date: 2015-05-15 Page 1 of 8 Report Reference # E300305-A99-UL UL TEST REPORT AND PROCEDURE Standard: Certification Type: CCN: Product: Model: Rating: UL 60950-1, 2nd Edition, 2014-10-14 (Information
More informationUL TEST REPORT AND PROCEDURE
Issue Date: 2010-07-15 Page 1 of 18 Report Reference # E317867-A26-UL UL TEST REPORT AND PROCEDURE Standard: Certification Type: CCN: UL 60950-1, 2nd Edition, 2011-12-19 (Information Technology Equipment
More informationSwitching Power Supply Series XP POWER L L C SUITE E DYER RD SANTA ANA CA 92705, USA
Ref. Certif. No. US-21344-UL IEC SYSTEM FOR MUTUAL RECOGNITION OF TEST CERTIFICATES FOR ELECTRICAL EQUIPMENT (IECEE) CB SCHEME SYSTEME CEI D'ACCEPTATION MUTUELLE DE CERTIFICATS D'ESSAIS DES EQUIPEMENTS
More informationIECEE OPERATIONAL DOCUMENT
IECEE OD-2011 Edition 1.4 2016-06-01 IECEE OPERATIONAL DOCUMENT IEC System of Conformity Assessment Schemes for Electrotechnical Equipment and Components (IECEE System) CBTL application form IECEE OD-2011:2016(EN)
More informationPage 1 of 2. Component - Power Supply SL POWER ELECTRONICS CORP 6050 KING DR. BLDG A VENTURA, CA 93003, USA
Page 1 of 2 US/14532A/UL Component - Power Supply SL POWER ELECTRONICS CORP 6050 KING DR. BLDG A VENTURA, CA 93003, USA SL POWER ELECTRONICS CORP 6050 KING DR. BLDG A VENTURA, CA 93003, USA SL POWER ELECTRONICS
More informationIECEE OPERATIONAL DOCUMENT
IECEE OD-2039 Edition 2.1 2017-05-17 IECEE OPERATIONAL DOCUMENT IEC System of Conformity Assessment Schemes for Electrotechnical Equipment and Components (IECEE System) Acceptance of Components within
More informationIECEE OPERATIONAL DOCUMENT
IECEE OD-2059 Edition 1.1 2017-05-17 IECEE OPERATIONAL DOCUMENT IEC System of Conformity Assessment Schemes for Electrotechnical Equipment and Components (IECEE System) Procedure for IECEE Document Management
More informationUL TEST REPORT AND PROCEDURE
Issue Date: 2011-12-16 Page 1 of 12 Report Reference # E135803-A65-UL UL TEST REPORT AND PROCEDURE Standard: Certification Type: CCN: Product: Model: UL 60950-1, 2nd Edition, 2007-03-27 (Information Technology
More informationUnderwriters Laboratories (UL LLC) Safety Certification Report
Underwriters Laboratories (UL LLC) Safety Certification Report Model: Device Description: Applicant: Manufacturer: ALM65USXXYY-ZZV (where XX is any number between 12-48 designating output voltage and YY
More informationIEC60601_1K. Medical electrical equipment Part 1: General requirements for basic safety and essential performance
Page 1 of 435 Report No.: E349607-D1002-1/A2/C0-ULCB CB - IEC REPORT: Test Report issued under the responsibility of: IEC 60601-1 Medical electrical equipment Part 1: General requirements for basic safety
More informationModel PM01 L L C UNIT D BREA. request
Poss se Aud io LLC Model PM01 CE Marki ng Technical Documentation File SUMMARY Complete Copy available from Manufacturer upon request POSSE AUDIO L L C UNIT D 2951 SATURN ST BREA CA 92821 UNITED STATES
More informationIECEE OPERATIONAL DOCUMENT
IECEE OD-2020 Edition 3.2 2017-05-17 IECEE OPERATIONAL DOCUMENT IEC System of Conformity Assessment Schemes for Electrotechnical Equipment and Components (IECEE System) TRF Development, maintenance and
More informationDEMKO CERTIFICATE. Certificate No Page 1/3 Date of Issue Certificate Holder. Manufacturer. Production site
DEMKO CERTIFICATE Certificate No. 146059-02 Page 1/3 Date of Issue 2008-11-04 Certificate Holder Manufacturer Production site SL POWER ELECTRONICS CORP. 6050 KING DR. BLDG A VENTURA CA 93003, USA SL POWER
More informationRef. Certificate No. KR-KTL-5987M1 IEC SYSTEM FOR MUTUAL RECOGNITION OF TEST CERTIFICATES FOR ELECTRICAL EQUIPMENT (IECEE) CB SCHEME
Ref. Certificate No. KR-KTL-5987M1 IEC SYSTEM FOR MUTUAL RECOGNITION OF TEST CERTIFICATES FOR ELECTRICAL EQUIPMENT (IECEE) CB SCHEME CB TEST CERTIFICATE SYSTEME CEI D'ACCEPTATION MUTUELLE DE CERTIFICATS
More informationUL TEST REPORT AND PROCEDURE
Page C-28 of C-39 Report No.: E309264-D1020-1-UL Description UL TEST REPORT AND PROCEDURE Standard: ANSI/AAMI ES60601-1:2005/(R)2012, CSA CAN/CSA-C22.2 NO. 60601-1:14 Certification Type: Component Recognition
More informationCOMMISSION ELECTROTECHNIQUE INTERNATIONALE INTERNATIONAL ELECTROTECHNICAL COMMISSION
COMMISSION ELECTROTECHNIQUE INTERNATIONALE INTERNATIONAL ELECTROTECHNICAL COMMISSION IECEE 02 Treizième édition Thirteenth edition 2009-12 Méthode de l IECEE d Acceptation Mutuelle de Certificats d Essai
More informationDALI LED Driver Economy Series
COSTAT CURRET & VOTAGE DAI ED Driver Economy Series Model: HED2020, HED20, HED2050, HED2060, HED2060-A2, HED30-A, HED6030-A, HED2075-A, HED3075-A Efficiency >0.93 Synchrony COSTAT CURRET & COSTAT VOTAGE
More informationOther Aspects: The completed test report includes the following documents: (total page 14)
Test Report No. SN0806032 TEST REPORT IEC 60945 Maritime navigation and radio communication equipment and systems-general requirements-methods of testing and required test results Report reference No :
More informationMiniature Relays Series M25 Type M25-1 pole 16 A Monostable
Miniature Relays Series M25 Type M25-1 pole 16 A Miniature size mm PCB mounting 5 kv / 10 mm insulation Switching capacity 16 A / 250 General purpose, industrial electronics Sealed according IP 67 Low
More informationDescription. SIMATIC Sensors. RF systems Wide-range power supply unit for SIMATIC RF systems. Operating Instructions 11/2007 J31069-D0169-U001-A4-7618
1 SIMATIC Sensors RF systems Wide-range power supply unit for SIMATIC RF systems Operating Instructions 11/2007 J31069-D0169-U001-A4-7618 Safety Guidelines This manual contains notices you have to observe
More informationBasic Temperature and Limit Controllers. Provide Economical Solution for a Wide Range of Applications SPECIFICATION SHEET
SPECIFICATION SHEET Basic Temperature and Limit Controllers Basic Temperature and Limit Controllers Provide Economical Solution for a Wide Range of Applications The basic and limit microprocessor-based
More informationBasic Temperature and Limit Controllers
Basic Temperature and Limit Controllers Basic Temperature and Limit Controller Provide Economical Solution for a Wide Range of Applications The basic and limit microprocessor-based controllers from Watlow
More informationUL TEST REPORT AND PROCEDURE
Issue Date: 2011-02-09 Page 1 of 16 Report Reference # E116994-A60-UL UL TEST REPORT AND PROCEDURE Standard: Certification Type: CCN: Product: Model: Rating: UL 60601-1, 1st Edition, 2006-04-26 (Medical
More informationDevices raised mounting
Devices raised mounting Illuminated pushbutton actuator Illuminated pushbutton actuator Front protection Switching system Contacts Diode (1N 47) Switching action Terminals b 18 x 18 mm Typ-Nr. a 18 x 24
More informationUL TEST REPORT AND PROCEDURE
Page C-30 of C-46 Report No.: E309264-D1028-1/A2/C0-UL UL TEST REPORT AND PROCEDURE Standard: ANSI/AAMI ES60601-1: A1:2012, C1:2009/(R)2012 and A2:2010/(R)2012, CSA CAN/CSA-C22.2 NO. 60601-1:14 Certification
More informationKUANTECH (SHEN ZHEN) COMPANY LIMITED KSAFD W1UK
1 GENERAL... 2 1.1 Description... 2 2 INPUT REQUIREMENTS... 2 2.1 Input Conditions... 2 2.2 AC Inrush Current... 2 3 OUTPUT REQUIREMENTS... 2 4 MECHANICAL... 3 4.1 Enclosure And Layout... 3 4.2 Input and
More informationDALI Bus Power Supply. DLP- 04 series VAC
0 05 VAC Ⅱ,. { File Name: DLP-0-SPEC 08-08-6 SPECIFICATION MODEL DLP-0R DLP-0L OUTPUT RATED POWER SETUP, RISE TIME HOLD UP TIME (Typ.) 70ms/0VAC 6ms/5VAC at full load VOLTAGE RANGE 90 ~ 6VAC 0 ~ 70VDC
More informationDescription Basic devices with positive operation contacts. Standards IEC/EN 60947, EN , VDE 0660, UL, CSA
Delivery program Contactor relay, 3N/O+1N/C, DC current Part no. DILA-31(24VDC) Catalog No. 276379 Eaton Catalog No. XTRE10B31TD EL-Nummer 4130206 (Norway) Product range DILA relays Application Contactor
More informationIECQ PUBLICATION IECQ 01A. IEC Quality Assessment System for Electronic Components (IECQ System)
IECQ 01A Edition 2.0 2013-05 IECQ PUBLICATION colour inside IEC Quality Assessment System for Electronic Components (IECQ System) IECQ Guide Guidance for the use of the IECQ Logo and IECQ Mark of Conformity
More informationUL TEST REPORT AND PROCEDURE
Issue Date: 2008-02-18 Page 1 of 17 Report Reference # E252373-A7-UL UL TEST REPORT AND PROCEDURE Standard: Certification Type: CCN: UL 60950-1, 2nd Edition, 2014-10-14 (Information Technology Equipment
More informationPower Supply XP POWER INC SUITE 150, 1241 E DYER RD SANTA ANA CA 92705, USA XP POWER LLC SUITE 150, 1241 E DYER RD SANTA ANA CA 92705, USA
Ref. Certif. No. US-18300-A3-UL IEC SYSTEM FOR MUTUAL RECOGNITION OF TEST CERTIFICATES FOR ELECTRICAL EQUIPMENT (IECEE) CB SCHEME SYSTEME CEI D ACCEPTATION MUTUELLE DE CERTIFICATS D ESSAIS DES EQUIPEMENTS
More informationXitanium. Xitanium 150W 0.7A 230V Y. LED Driver. Datasheet
Xitanium LED Driver Datasheet Xitanium 150W 0.7A 230V Y LED-based light sources are an excellent solution for outdoor environment. They are long-lasting and require low maintenance. However, to get the
More informationASI QUINT /2.4 EFD
Extract from the online catalog ASI QUINT 100-240/2.4 EFD Order No.: 2736686 Power supply unit für AS interface, 2.4 A, integrated ground fault detector, IP20 degree of protection Commercial data EAN 4017918959678
More informationST 200 M data sheet System pro M compact miniature circuit breakers for supplementary protection acc. to UL 1077
MINIATURE CIRCUIT BREAKERS ST 200 M data sheet System pro M compact miniature circuit breakers for supplementary protection acc. to UL 1077 The ST 200 M miniature circuit breaker provides supplementary
More informationPOWERSOLVE ELECTRONICS LTD PSL400-XX series Conduction Cooled Power Supply Engineering Specification
POWERSOLVE ELECTRONICS LTD PSL400-XX series Conduction Cooled Power Supply Engineering Specification 1. Scope 2. Electrical Specification 2.1. AC Input Requirements 2.1.1. Input Voltage 2.1.2. Input Frequency
More informationXitanium. Xitanium 150W 0.7A 230V Y. LED Driver. Datasheet
Xitanium LED Driver Datasheet Xitanium 150W 0.7A 230V Y LED-based light sources are an excellent solution for outdoor environment. They are long-lasting and require low maintenance. However, to get the
More informationLC35SE-CC LOOP
35 W SELV Constant current LED driver Product code: 5748 35 W 220 240 V 0/ 50 60 Hz SELV output protection for safety and flexibility in luminaires Very low current ripple, complying with IEEE 1789 standard
More informationLC51SE-CC LOOP
51 W SELV Constant current LED driver Product code: 5740 51 W 220 240 V 0/ 50 60 Hz SELV output protection for safety and flexibility in luminaires Very low current ripple, complying with IEEE 1789 standard
More informationC E R T I F I C A T E O F C O M P L I A N C E
C E R T I F I C A T E O F C O M P L I A N C E Certificate Number 20131004-E127643 Report Reference E127643-A162-UL Issue Date 2013-OCTOBER-04 Issued to: PHIHONG TECHNOLOGY CO LTD 568 FU XING 3RD RD, GUISHAN
More informationTest Report. Product Name : Stackable Gigabit Ethernet Switch Model No. : DGS-3224SR, DGS-3324SRI, DGS-3324SR, DPS-500, DPS-900
Test Report Product Name : Stackable Gigabit Ethernet Switch Model No. : DGS-3224SR, DGS-3324SRI, DGS-3324SR, DPS-500, DPS-900 Applicant : D-Link Corporation Address : No. 8, Li-Hsing Seventh Road, Science-Based
More informationUL TEST REPORT AND PROCEDURE
Issue Date: 2014-01-24 Page 1 of 16 Report Reference # E135803-A74-UL UL TEST REPORT AND PROCEDURE Standard: Certification Type: CCN: Product: Model: UL 60950-1, 2nd Edition, 2014-10-14 (Information Technology
More informationSTEP-PS/1AC/24DC/2.5. Extract from the online catalog. Order No.: DIN rail power supply of 24 V DC/2.5 A, primary switched, single phase.
Extract from the online catalog STEP-PS/1AC/24DC/2.5 Order No.: 2868651 DIN rail power supply of 24 V DC/2.5 A, primary switched, single phase. Commercial data EAN 4046356163224 Pack 1 pcs. Customs tariff
More informationSUPPLEMENTARY TYPE EXAMINATION CERTIFICATE
1. SUPPLEMENTARY TYPE EXAMINATION CERTIFICATE 2. Equipment or Protective System Intended for use in Potentially Explosive Atmospheres Directive 94/9/EC 3. Type Examination Certificate Number: ITS13ATEX47876X/1
More informationJtec 10kA Miniature Circuit Breaker
Jtec 0kA Miniature Circuit Breaker EN 60898 The Jtec range has been enthusiastically adopted by a diverse range of customers seeking a cost effective 0kA performance. Jtec MCBs are available in a wide
More informationSafety Standards. Model Number: Unit Weight:
MEA-250A24C Highlights & Features Meet Efficiency Level VI Safety Approvals to IEC 60601-1 3.1 Ed. & IEC 60950-1 Compliant with IEC 60601-1-2 3 th and 4 th Ed. Requirements IP22 ingress protection rating
More informationMotor-protective circuit-breaker, 3p, Ir=16-25A, screw connection. Product range PKZM4 motor protective circuit-breakers up to 65 A
DATASHEET - PKZM4-25 Delivery program Motor-protective circuit-breaker, 3p, Ir=16-25A, screw connection Part no. PKZM4-25 Catalog No. 222352 Eaton Catalog No. XTPR025DC1NL EL-Nummer 0004355158 (Norway)
More informationWithstands max. 320 VAC (max. 1 hour) *) Low frequency, LED load: Cree XP-G L LEDs. 350 ma 600 ma Fixed output 850 ma P Rated
35 W SELV Constant current LED driver Product code: 5732 35 W 220 240 V 0/ 50 60 Hz SELV output protection for safety and flexibility in luminaires Very low current ripple, complying with IEEE 1789 standard
More informationABL8RPS24100 regulated SMPS - 1 or 2-phase V - 24 V - 10 A
Product datasheet Characteristics ABL8RPS24100 regulated SMPS - 1 or 2-phase - 100..500 V - 24 V - 10 A Complementary Input voltage limits Network frequency Inrush current Cos phi Main Range of product
More informationSPST-NO SPDT DPST-NO DPDT
Next-generation PCB Relay Available in Various Models ROHS compliant. High sensitivity: (250mW) and high capacity (16A) models available Low profile: 15.7 mm max. in height. Conforms to EN 61810-1, UL508
More informationTEST REPORT. Address : Samsungtechwin R&D Center, 701, Sampyeong-dong, Bundang-gu, Seongnam-si, Gyeonggi-do , Korea
Page : 1 / 23 TEST REPORT Report No. : SGS-R13-1289-EN Applicant : SAMSUNG TECHWIN Co., Ltd. Address : Samsungtechwin R&D Center, 701, Sampyeong-dong, Bundang-gu, Seongnam-si, Gyeonggi-do 463-400, Korea
More informationC E R T I F I C A T E O F C O M P L I A N C E
C E R T I F I C A T E O F C O M P L I A N C E Certificate Number 20170930-E135493 Report Reference Issue Date E135493-A28-UL 2017-September-30 Issued to: VICOR CORP 25 FRONTAGE RD ANDOVER MA 01810 This
More informationMMA-15 series. 15W Medical Grade Ultraminiature Switching Power Supplies. Single / Dual / Triple Outputs. Universal 90 to 264VAC Input
Single / Dual / Triple Outputs Universal 90 to 264VAC Input 3.3VDC to 24VDC Outputs Chassis 3.96 L x 2.16 W x 1.0 H 4,000VAC Input to Output Isolation PCB and Chassis Mount Packages Full Safety Approvals
More informationDevices raised mounting
Devices raised mounting Illuminated actuator pushbutton Front protection Switching system Ø 29 mm Contacts Typ-Nr. e Illuminated actuator pushbutton IP 67 LL 1 NC - MA UT 14-476.36 1 4 17 12.15 M UT 14-436.36
More information1492-SP Supplementary Protectors
Dual terminals provide wiring/bus bar flexibility and clamp from both sides to improve connection reliability Approval marks are easily visible on dome Terminal design helps prevent wiring misses Scratch-
More informationCERTIFICATE OF COMPLIANCE
CERTIFICATE OF COMPLIANCE Certificate Number 20151010-E127643 Report Reference Issue Date E127643-A36-UL 2015-OCTOBER-10 Issued to: PHIHONG TECHNOLOGY CO LTD 568 Fu Xing 3rd Rd Guishan District Taoyuan
More informationTEST REPORT IEC Information technology equipment - Safety - Part 1: General requirements
Issue Date: 2016-04-22 Page 1 of 26 Report Reference # E186249-A314-CB-1 Test Report issued under the responsibility of: Report Reference No... : TEST REPORT Information technology equipment - Safety -
More informationEx. H3Y-2-C 110 VAC 30 s Rated time Supply voltage 2. Sockets and Hold-down Clips are not included with the H3Y. They must be ordered separately.
New Product Solid-state Timer H3Y-C Miniature Timer Compatible with the MY Relay On-delay function with precise time control. Large transparent time setting knob facilitates time setting. Pin configuration
More informationQuick Start Guide Elinx ESW200 Series. 5 and 8 port Unmanaged Ethernet Switch
Quick Start Guide Elinx ESW200 Series 5 and 8 port Unmanaged Ethernet Switch ESW200 Series Documentation Number: ESW200series-1112qsg International Headquarters: 707 Dayton Road Ottawa, IL 61350 USA Phone
More informationPR - PCB relay. 42 catalog 2002 e / the PR-PCB relay. By using best materials and because of the simple construction the highest failsecurity
PR - PCB relay the PR-PCB relay PCB-Relay from the PR family are small relays. The version has forced guided contacts, 2 normally open contacts, 2 normally closed contacts. In the industrial electronic
More informationDeltaV SIS Conditioning Components
DeltaV SIS Process Safety System DeltaV SIS Conditioning Components The DeltaV SIS conditioning components allow you to use the DeltaV SIS system with a variety of different field signal requirements.
More informationWorld most famous and successful Conformity Assessment Scheme for mutual recognition of test certificates for electrical equipment
IECEE CB Scheme World most famous and successful Conformity Assessment Scheme for mutual recognition of test certificates for electrical equipment 9/29/2004 1 IECEE CB Scheme history IECEE CB Scheme history
More informationUL TEST REPORT AND PROCEDURE
Issue Date: 2013-04-10 Page 1 of 16 Report Reference # E135803-A73-UL UL TEST REPORT AND PROCEDURE Standard: Certification Type: CCN: Product: Model: Rating: UL 60950-1, 2nd Edition, 2011-12-19 (Information
More informationThis is a preview - click here to buy the full publication. IEC Quality Assessment System for Electronic Components (IECQ System)
IECQ 03-3-1 Edition 1.0 2013-02 IECQ PUBLICATION IEC Quality Assessment System for Electronic Components (IECQ System) Rules of Procedure Part 3-1: IECQ Approved Component Products, Related Materials &
More informationDEK-REL- 5/I/1. Extract from the online catalog. Order No.:
Extract from the online catalog DEK-REL- 5/I/1 Order No.: 2941183 The illustration shows the version DEK-REL- 24/I/1 Relay terminal block, with soldered-in miniature relays, contact (AgNi +Au): small to
More informationControlNet-to-DeviceNet Linking Device
Installation Instructions ControlNet-to-DeviceNet Linking Device Catalog Number 1788-CN2DN Topic Page Important User Information 2 About the CN2DN Linking Device 7 Parts List 8 Required System Components
More informationABL8RPS24100 regulated SMPS - 1 or 2-phase V - 24 V - 10 A
Characteristics regulated SMPS - 1 or 2-phase - 100..500 V - 24 V - 10 A Main Range of product Product or component type Power supply type Input voltage Output voltage Rated power in W Jun 27, 2018 Phaseo
More informationTSXPAY262 Preventa safety module - 24 V DC - standard format - < 5 W
Characteristics Preventa safety module - 24 V DC - standard format - < 5 W Main Range of product Product or component type Complementary [Us] rated supply voltage Supply voltage limits Activation threshold
More informationC E R T I F I C A T E O F C O M P L I A N C E
C E R T I F I C A T E O F C O M P L I A N C E Certificate Number 20150625-E135493 Report Reference Issue Date E135493-A28-UL 2015-JUNE-25 Issued to: VICOR CORP 25 FRONTAGE RD ANDOVER MA 01810 This is to
More informationATTACHMENT TO TEST REPORT IEC EUROPEAN GROUP DIFFERENCES AND NATIONAL DIFFERENCES
Report No.: GZES120200117901 age 1 of 9 ATTACHMENT TO TEST REORT IEC 60335-2-32 EUROEAN GROU DIFFERENCES AND NATIONAL DIFFERENCES Household and similar electrical appliances Safety art 2: articular requirements
More informationLL1x150-CR-DA. 150 W Dimmable DALI-2 LED driver. 150 W V 0 / Hz. Functional Description. Mains Characteristics
150 W Dimmable DALI-2 LED driver DALI-2 certified LED driver, 1-100 % dimming range Filtered hybrid dimming technology Very high efficiency up to 96 % Low ripple and flicker (according to IEEE 1789) Suitable
More informationE A54-UL 2012-AUGUST-29 XP POWER L L C SUITE E DYER RD SANTA ANA CA 92705
CERTIFICATE OF COMPLIANCE Certificate Number 20120829-E139109 Report Reference Issue Date E139109-A54-UL 2012-AUGUST-29 Issued to: XP POWER L L C SUITE 150 1241 E DYER RD SANTA ANA CA 92705 This is to
More informationQUINT-PS/1AC/24DC/10. Extract from the online catalog. Order No.:
Extract from the online catalog QUINT-PS/1AC/24DC/10 Order No.: 2866763 DIN rail power supply unit 24 V DC/10 A, primary-switched mode, 1- phase. The SFB technology (Selective Fusebreaking Technology)
More informationTEST REPORT IEC Information technology equipment - Safety - Part 1: General requirements
Issue Date: 2015-03-20 Page 1 of 95 Report Reference # E135494-A55-CB-3 Test Report issued under the responsibility of: Report Reference No... : TEST REPORT IEC 60950-1 Information technology equipment
More informationDeltaV Bulk Power Supplies
DeltaV Distributed Control System Product Data Sheet DeltaV Bulk Power Supplies DeltaV 5 A, 10A, 20 A, 40 A Bulk Power Supplies. DeltaV 20 A, 40 A and 80 A Bulk Power Supply Redundancy Modules. Easy to
More informationDiffuse reflection light scanner with background suppression. Dimensioned drawing
Specifications and description HRTR 55 Ex Diffuse reflection light scanner with background suppression Dimensioned drawing en 01-2011/05 50113748 1 khz 5 400mm 200mm with black-white error < 10% 10-30
More informationQuick Start Guide Elinx ESW100 Series. 5 and 8 port Unmanaged Ethernet Switch
Quick Start Guide Elinx ESW100 Series 5 and 8 port Unmanaged Ethernet Switch ESW100 Series Documentation Number: ESW100series-1112qsg International Headquarters: 707 Dayton Road Ottawa, IL 61350 USA Phone
More informationLL1x80-CR-DA. 80 W Dimmable DALI-2 LED driver. 80 W V 0 / Hz. Functional Description. Mains Characteristics
80 W Dimmable DALI-2 LED driver Product code: 5559 80 W 220 240 V 0 / 50 60 Hz DALI-2 certified LED driver, 1-100 % dimming range Filtered hybrid dimming technology Very high efficiency up to 9 Low ripple
More informationIDC Assembly (depends on cable) -55/125 C. IDC Assembly (depends on cable) By ambient temperature: 20 C 1,2 A 70 C 0,9 A 100 C 0,6 A
mm Connectors Surface Mount Technology, Solderless Pressfit, IDC Electrical And Mechanical Characteristics Number of Pins Technical data Climate Category Bearing and operating temperature area Current
More informationABL8WPS24400 regulated SMPS - 3-phase V - 24 V - 40 A
Characteristics regulated SMPS - 3-phase - 380..500 V - 24 V - 40 A Main Range of product Product or component type Power supply type Input voltage Output voltage Rated power in W Jan 11, 2018 Phaseo Power
More informationFCC Rules & Procedures. Roy Uggerud, Nemko Norway 25th January 2018
FCC Rules & Procedures Roy Uggerud, Nemko Norway 25th January 2018 Certification requirement Nearly every country requires certification before import and sale of the product 2 25.01.2018 FCC RULES & PROCEDURES
More informationPV Monitoring System. PLC Box and Data Logger USER MANUAL
PV Monitoring System PLC Box and Data Logger USER MANUAL 0 Table of Content 1. Safety Information..2 1.1 Notifications. 2 1.2 Symbols... 2 1.3 Intended use and Safety Warnings.. 2 1.4 Safety of Installation
More informationElectrical Specifications VAC/390 VDC, Universal (Derate from 100% at 100V AC to 95% at 85V AC)
225 Watt Industrial Features 4 x 2 x 1 Inches Form factor 225 Watts with Forced Air Cooling Efficiencies upto 94% -40 to 70 degree operating temperature* 12V / 0.5A Fan Output, Thermal Shut-Down feature
More informationABL8BBU24200 battery control module V DC - 24 V - 20 A - for regulated SMPS
Characteristics battery control module - 24..28.8 V DC - 24 V - 20 A - for regulated SMPS Main Range of product Product or component type Input voltage Output voltage Maximum output current Phaseo Battery
More informationUL TEST REPORT AND PROCEDURE
Issue Date: 2012-02-09 Page 1 of 13 Report Reference # E116994-A76-UL UL TEST REPORT AND PROCEDURE Standard: ANSI/AAMI ES60601-1:2005, 3rd ed. (Medical Electrical Equipment - Part 1: General Requirements
More informationXitanium Dim 100W 0.8A 1-10V 230V I175
Xitanium LED Driver Datasheet LED-based light sources are an excellent solution for outdoor environment. They are long-lasting and require low maintenance. However, to get the best out of the LEDs, these
More information