16 x 1 Character LCD

Size: px

Start display at page:

Download "16 x 1 Character LCD"

Claud Robbins
6 years ago
Views:

LCD-16N1A-NFG-ET 16 x 1 Character LCD FEATURES Type: Character Display format: 16 x 1 characters Built-in controller: ST 766 or equivalent Duty cycle: 1/16 5 x 8 dots includes cursor + 5 V power

1 LCD-16N1A-NFG-ET 16 x 1 Character LCD FEATURES Type: Character Display format: 16 x 1 characters Built-in controller: ST 766 or equivalent Duty cycle: 1/16 5 x 8 dots includes cursor + 5 V power supply LED can be driven by pin 1, pin 2, pin 15, pin 16, or A and K Material categorization: For definitions of compliance please see MECHANICAL DATA ITEM STANDARD VALUE UNIT Module Dimension 8. x 36. x 9.7 Viewing Area 66. x 16. Dot Size.55 x.75 Dot Pitch.63 x.83 mm Mounting Hole 75. x 31. Character Size 3.7 x 6.56 ABSOLUTE MAXIMUM RATINGS STANDARD VALUE ITEM SYMBOL MIN. TYP. MAX. Power Supply V DD to V SS Input Voltage V I V SS - V DD Note V SS = V, V DD = 5. V UNIT V ELECTRICAL CHARACTERSITICS ITEM SYMBOL CONDITION STANDARD VALUE MIN. TYP. MAX. UNIT Input Voltage V DD V DD = + 5 V V Supply Current I DD V DD = + 5 V ma - 2 C Recommended LC Driving Voltage for Normal Temperature Version Module V DD to V C 25 C 5 C V 7 C LED Forward Voltage V F 25 C V LED Forward Current I F 25 C ma EL Power Supply Current I EL V EL = 11 V AC, 4 Hz ma DISPLAY CHARACTER ADDRESS CODE Display Position DD Address Revision: 8-Jan-13 1 Document Number: ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT

2 LCD-16N1A-NFG-ET INTERFACE PIN FUNCTION PIN NO. SYMBOL FUNCTION 1 V SS Ground 2 V DD Supply voltage for logic (+ 5 V) 3 V Operating voltage for LCD (variable) 4 RS H/L; H: data/l: instruction code 5 R/W H/L; H: read (MPU module)/l: write (MPU module) 6 E H, H L chip enable signal 7 DB H/L data bus line 8 DB1 H/L data bus line 9 DB2 H/L data bus line 1 DB3 H/L data bus line 11 DB4 H/L data bus line 12 DB5 H/L data bus line 13 DB6 H/L data bus line 14 DB7 H/L data bus line 15 A no connection 16 K no connection DIMENSIONS in millimeters ± ± (VA) 6.56 (AA) (VA) (AA) 38.1 (P4 x 15) x Ø Dot Size K A K A Max x Ø PTH 4 x Ø 5. PAD 4 x Ø 1. PTH 1.6 EL or NO B/L Revision: 8-Jan-13 2 Document Number: ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT

3 LCD-16N1A-NFG-ET 1.Module Classification Information LCD -16 N 1 A -N F G -ET Brand Intertechnology, Inc. 2. Horizontal Format: 16 characters 3. Display TypeNCharacter Type, HGraphic Type 4. Vertical Format: 1 lines 5. Model serials no.: A 6. Backlight Type NWithout backlight BEL, Blue green DEL, Green WEL, White FCCFL, White YLED, Yellow Green TLED, White ALED, Amber RLED, Red OLED, Orange GLED, Green 7. LCD Mode BTN Positive, Gray TFSTN Negative NTN Negative, GSTN Positive, Gray YSTN Positive, Yellow Green MSTN Negative, Blue FFSTN Positive 8. LCD Polarizer Type/ Temperature range/ View direction AReflective, N.T, 6: DReflective, N.T, 12: GReflective, W. T, 6: JReflective, W. T, 12: BTransflective, N.T,6: ETransflective, N.T.12: HTransflective, W.T,6: KTransflective, W.T,12: CTransmissive, N.T,6: FTransmissive, N.T,12: ITransmissive, W. T, 6: LTransmissive, W.T,12: 9. Special Code ET : English and European standard font Fits in with the ROHS Directions and regulations Revision: 8-Jan-13 3 Document Number: ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT

4 LCD-16N1A-NFG-ET 2.Precautions in use of LCD Modules (1)Avoid applying excessive shocks to the module or making any alterations or modifications to it. (2)Don t make extra holes on the printed circuit board, modify its shape or change the components of LCD module. (3)Don t disassemble the LCM. (4)Don t operate it above the absolute maximum rating. (5)Don t drop, bend or twist LCM. (6)Soldering: only to the I/O terminals. (7)Storage: please storage in anti-static electricity container and clean environment. (8)Supplier has the right to change the passive components (9)Supplier has the right to change the PCB Rev. 3.General Specification Item Dimension Unit Number of Characters 16 characters x 1 Lines Module dimension 8. x 36. x 9.7(MAX) mm View area 66. x 16. mm Active area x 6.56 mm Dot size.55 x.75 mm Dot pitch.63 x.83 mm Character size 3.7 x 6.56 mm Character pitch 3.77 x 6.56 mm LCD type FSTN Positive Reflective, (In LCD production, It will occur slightly color difference. We can only guarantee the same color in the same batch.) Duty 1/16 View direction 6 o clock Revision: 8-Jan-13 4 Document Number: ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT

5 LCD-16N1A-NFG-ET 4.Absolute Maximum Ratings Item Symbol Min Typ Max Unit Operating Temperature T OP Storage Temperature T ST Input Voltage V I V SS V DD V Supply Voltage For Logic VDD-V SS V Supply Voltage For LCD V DD -V V 5.Electrical Characteristics Item Symbol Condition Min Typ Max Unit Supply Voltage For Logic V DD -V SS V Supply Voltage For LCD *Note V DD -V Ta=-2 Ta=25 Ta= V V V Input High Volt. V IH.7 V DD V DD V Input Low Volt. V IL V SS.6 V Output High Volt. V OH 3.9 V Output Low Volt. V OL.4 V Supply Current I DD V DD =5V ma * Note: Please design the VOP adjustment circuit on customer's main board VR 1K~2K Vdd Vo VSS LCM Module Revision: 8-Jan-13 5 Document Number: ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT

6 LCD-16N1A-NFG-ET 6.Optical Characteristics View Angle Item Symbol Condition Min Typ Max Unit (V) CR2 3 6 deg (H) CR deg Contrast Ratio CR 5 Response 25C T rise 15 2 ms T fall 15 2 ms Definition of Operation Voltage (Vop) Definition of Response Time ( Tr, Tf ) Intensity Selected Wave Non-selected Conition Selected Conition Non-selected Conition 1 Non-selected Wave Intensity 1 Cr Max Cr = Lon / Loff 1 9 Vop Driving Voltage(V) Tr Tf [positive type] [positive type] Conditions : Operating Voltage : Vop Frame Frequency : 64 HZ Viewing Angle() : Driving Waveform : 1/N duty, 1/a bias Definition of viewing angle(cr2) f l b r = 18 = 27 = 9 = Revision: 8-Jan-13 6 Document Number: ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT

7 LCD-16N1A-NFG-ET 7.Interface Pin Function Pin No. Symbol Level Description 1 V SS V Ground 2 V DD 5.V Supply Voltage for logic 3 VO (Variable) Operating voltage for LCD 4 RS H/L H: DATA, L: Instruction code 5 R/W H/L H: Read(MPUModule) L: Write(MPUModule) 6 E H,HL Chip enable signal 7 DB H/L Data bus line 8 DB1 H/L Data bus line 9 DB2 H/L Data bus line 1 DB3 H/L Data bus line 11 DB4 H/L Data bus line 12 DB5 H/L Data bus line 13 DB6 H/L Data bus line 14 DB7 H/L Data bus line 15 A NC 16 K NC Revision: 8-Jan-13 7 Document Number: ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT

8 LCD-16N1A-NFG-ET 8.Contour Drawing &Block Diagram MPU 8 series or 68 series RS R/W E DB~DB7 Controller/Com Driver HD4478 or Equivalent Com1~8 Com9~16 16X1 LCD VR 1K~2K Vdd Vo Vss Bias and Power Circuit Seg1~4 External contrast adjustment. Character located DD address line display mode. Revision: 8-Jan-13 8 Document Number: ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT

9 LCD-16N1A-NFG-ET 9.Function Description The LCD display Module is built in a LSI controller, the controller has two 8-bit registers, an instruction register (IR) and a data register (DR). The IR stores instruction codes, such as display clear and cursor shift, and address information for display data (DD) and character generator (). The IR can only be written from the MPU. The DR temporarily stores data to be written or read from DD or. When address information is written into the IR, then data is stored into the DR from DD or. By the register selector (RS) signal, these two registers can be selected. RS R/W Operation IR write as an internal operation (display clear, etc.) 1 Read busy flag (DB7) and address counter (DB to DB7) 1 Write data to DD or (DR to DD or ) 1 1 Read data from DD or (DD or to DR) Busy Flag (BF) When the busy flag is 1, the controller LSI is in the internal operation mode, and the next instruction will not be accepted. When RS= and R/W=1, the busy flag is output to DB7. The next instruction must be written after ensuring that the busy flag is. Address Counter (AC) The address counter (AC) assigns addresses to both DD and Display Data (DD) This DD is used to store the display data represented in 8-bit character codes. Its extended capacity is 88 bits or 8 characters. Below figure is the relationship between DD addresses and positions on the liquid crystal display. High bits Low bits Example: DD addresses 4E AC (hexadecimal) AC6 AC5 AC4 AC3 AC2 AC1 AC Revision: 8-Jan-13 9 Document Number: ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT

10 LCD-16N1A-NFG-ET Display position DD address Line display mode Character Generator ROM (ROM) The ROM generate 58 dot or 51 dot character patterns from 8-bit character codes. See Table 2. Character Generator () In, the user can rewrite character by program. For 58 dots, eight character patterns can be written, and for 51 dots, four character patterns can be written. Write into DD the character code at the addresses shown as the left column of table 1. To show the character patterns stored in. Revision: 8-Jan-13 1 Document Number: ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT

11 LCD-16N1A-NFG-ET Relationship between Addresses, Character Codes (DD) and Character patterns Table 1. For 5 * 8 dot character patterns Character Codes ( DD data ) Address Character Patterns ( data ) High Low High Low High Low * * * 1 * * * 1 * * * 1 1 * * * * 1 * * * 1 1 * * * 1 1 * * * * * * * * * 1 * * * 1 * * * 1 1 * * * * * * * 1 1 * * * 1 1 * * * * * * * * * 1 Character pattern( 1 ) Cursor pattern Character pattern( 2 ) Cursor pattern * For 5 * 1 dot character patterns Character Codes Address ( DD data ) High Low * High Low * * * Character Patterns ( data ) High Low * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * Character pattern Cursor pattern : " High " * * * * * * * * Revision: 8-Jan Document Number: ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT

12 LCD-16N1A-NFG-ET 1.Character Generator ROM Pattern Table.2 Upper 4 bit Lower 4 bit LLLL LLLH LLHL LLHH LHLL LHLH LHHL LHHH HLLL HLLH HLHL HLHH HHLL HHLH HHHL HHHH LLLL LLLH LLHL LLHH LHLL LHLH LHHL LHHH HLLL HLLH HLHL HLHH HHLL HHLH HHHL HHHH ( 1 ) ( 2 ) ( 3 ) ( 4 ) ( 5 ) ( 6 ) ( 7 ) ( 8 ) ( 1 ) ( 2 ) ( 3 ) ( 4 ) ( 5 ) ( 6 ) ( 7 ) ( 8 ) Revision: 8-Jan Document Number: ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT

13 LCD-16N1A-NFG-ET 11.Instruction Table Instruction RS Instruction Code R/W DB7 DB6 DB5 DB4 DB3 DB2 DB1 DB Description Execution time (fosc=27khz) Clear Display 1 Write H to DD and set DD address to H from AC 1.53ms Return Home 1 Entry Mode Set Display ON/OFF Control Cursor or Display Shift 1 I/D SH 1 D C B 1 S/C R/L Function Set 1 DL N F Set Address Set DD Address Read Busy Flag and Address Write Data to Set DD address to H from AC and return cursor to its original position if shifted. The contents of DD are not changed. Assign cursor moving direction and enable the shift of entire display. Set display (D), cursor (C), and blinking of cursor (B) on/off control bit. Set cursor moving and display shift control bit, and the direction, without changing of DD data. Set interface data length (DL:8-bit/4-bit), numbers of display line (N:2-line/1-line)and, display font type (F:511 dots/58 dots) 1.53ms 39s 39s 39s 39s 1 AC5 AC4 AC3 AC2 AC1 AC Set address in address counter. 39s 1 AC6 AC5 AC4 AC3 AC2 AC1 AC Set DD address in address counter. 39s Whether during internal operation or not 1 BF can be known by reading BF. The AC6 AC5 AC4 AC3 AC2 AC1 AC contents of address counter can also be read. 1 D7 D6 D5 D4 D3 D2 D1 D Write data into internal (DD/). s 43s Read Data from 1 1 D7 D6 D5 D4 D3 D2 D1 D Read data from internal (DD/). 43s don t care Revision: 8-Jan Document Number: ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT

14 LCD-16N1A-NFG-ET 12. Timing Characteristics 12.1 Write Operation Ta=25, VDD=5V Item Symbol Min Typ Max Unit Enable cycle time T C 12 ns Enable pulse width T PW 14 ns Enable rise/fall time T R,T F 25 ns Address set-up time (RS, R/W to E) t AS ns Address hold time t AH 1 ns Data set-up time t DSW 4 ns Data hold time t H 1 ns Revision: 8-Jan Document Number: ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT

15 LCD-16N1A-NFG-ET 12.2 Read Operation Ta=25, VDD=5 Item Symbol Min Typ Max Unit Enable cycle time T C 12 ns Enable pulse width (high level) T PW 14 ns Enable rise/fall time T R,T F 25 ns Address set-up time (RS, R/W to E) t AS ns Address hold time t AH 1 ns Data delay time t DDR 1 ns Data hold time t H 1 ns Revision: 8-Jan Document Number: ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT

16 LCD-16N1A-NFG-ET 13. Initializing of LCM Power on Wait for more than 4 ms after VDD rises to 4.5 V RS R/W DB7 DB6 DB5 DB4 DB3 1 1 * DB2 * DB1 * DB * BF can not be checked before this instruction. Function set RS R/W Wait for more than 39us DB7 DB6 N F DB5 DB4 DB3 DB2 DB1 DB 1 * * * * * * * * * * BF can not be checked before this instruction. Function set Wait for more than 39 µs RS R/W DB7 DB6 DB5 DB4 DB3 DB2 DB1 DB BF can not be checked before this instruction. 1 * * * * N F * * * * * * Function set Wait for more than 37us RS R/W DB7 1 DB6 D DB5 C DB4 B DB3 * * DB2 * * DB1 * * DB * * Display ON/OFF control Wait for more than 37 µs RS R/W DB7 DB6 DB5 DB4 DB3 DB2 DB1 DB * * * * 1 * * * * Display Clear Wait for more than 1.53ms RS R/W DB7 DB6 DB5 DB4 DB3 DB2 DB1 DB * * * * 1 I/D SH * * * * Entry Mode Set Initialization ends 4-Bit Ineterface Revision: 8-Jan Document Number: ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT

17 LCD-16N1A-NFG-ET Power on Wait for more than 4 ms after VDD rises to 4.5 V RS R/W DB7 DB6 DB5 DB4 DB3 DB2 DB1 DB 1 1 N F * * BF can not be checked before this instruction. Function set Wait for more than 39us RS R/W DB7 DB6 DB5 1 DB4 1 DB3 DB2 DB1 DB N F * * BF can not be checked before this instruction. Function set Wait for more than 37us RS R/W DB7 DB6 DB5 DB4 DB3 DB2 DB1 DB 1 B C D Display ON/OFF control Wait for more than 37 µs RS R/W DB7 DB6 DB5 DB4 DB3 DB2 DB1 DB 1 Display Clear Wait for more than 1.53ms RS R/W DB7 DB6 DB5 DB4 DB3 DB2 DB1 DB 1 I/D S Entry Mode Set Initialization ends 8-Bit Ineterface Revision: 8-Jan Document Number: ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT

18 LCD-16N1A-NFG-ET 14.Reliability Content of Reliability Test (wide temperature, -2~7) Environmental Test Test Item Content of Test Test Condition Note High Temperature Endurance test applying the high storage temperature 8 storage for a long time. 2hrs 2 Low Temperature Endurance test applying the high storage temperature -3 storage for a long time. 2hrs 1,2 Endurance test applying the electric stress (Voltage & High Temperature 7 Current) and the thermal stress to the element for a Operation 2hrs long time. Low Temperature Operation High Temperature/ Humidity Operation Thermal shock resistance Endurance test applying the electric stress under low temperature for a long time. The module should be allowed to stand at 6,9%RH max For 96hrs under no-load condition excluding the polarizer, Then taking it out and drying it at normal temperature. The sample should be allowed stand the following 1 cycles of operation hrs 6,9%RH 96hrs -2/7 1 cycles 1 1,2 Vibration test Static electricity test 3min 5min 3min 1 cycle Endurance test applying the vibration during transportation and using. Endurance test applying the electric stress to the terminal. Total fixed amplitude : 1.5mm Vibration Frequency : 1~55Hz 3 One cycle 6 seconds to 3 directions of X,Y,Z for Each 15 minutes VS=8V,RS=1.5k CS=1pF 1 time Note1: No dew condensation to be observed. Note2: The function test shall be conducted after 4 hours storage at the normal Temperature and humidity after remove from the test chamber. Note3: Vibration test will be conducted to the product itself without putting it in a container. Revision: 8-Jan Document Number: ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT

19 LCD-16N1A-NFG-ET 15. Inspection specification NO Item Criterion AQL 1 Electrical Testing 1.1 Missing vertical, horizontal segment, segment contrast defect. 1.2 Missing character, dot or icon. 1.3 Display malfunction. 1.4 No function or no display. 1.5 Current consumption exceeds product specifications. 1.6 LCD viewing angle defect. 1.7 Mixed product types. 1.8 Contrast defect Black or white spots on LCD (display only) 2.1 White and black spots on display.25mm, no more than three white or black spots present. 2.2 Densely spaced: No more than two spots or lines within 3mm 3 LCD black spots, white spots, contamination (non-display) 3.1 Round type : As following drawing 3.2 Line type : (As following drawing) Length Width Acceptable Q TY --- W Accept no dense L L.2W.3W W As round type 4 Polarizer bubbles If bubbles are visible, judge using black spot specifications, not easy to find, must check in specify direction. Size Acceptable Q TY Accept no dense 3 2 Total Q TY 3 Revision: 8-Jan Document Number: ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT

20 LCD-16N1A-NFG-ET NO Item Criterion AQL 5 Scratches Follow NO.3 LCD black spots, white spots, contamination Symbols Define: x: Chip length y: Chip width z: Chip thickness k: Seal width t: Glass thickness a: LCD side length L: Electrode pad length: 6.1 General glass chip : Chip on panel surface and crack between panels: 6 Chipped glass Revision: 8-Jan-13 2 Document Number: ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT

LCD-16N1A-NFG-ET NO Item Criterion AQL x: Chip length y: Chip width z: Chip thickness k: Seal width t: Glass thickness a: LCD side length L: Electrode pad length 6.

21 LCD-16N1A-NFG-ET NO Item Criterion AQL x: Chip length y: Chip width z: Chip thickness k: Seal width t: Glass thickness a: LCD side length L: Electrode pad length 6.2 Protrusion over terminal : Chip on electrode pad : 6 Glass crack Revision: 8-Jan Document Number: ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT

22 LCD-16N1A-NFG-ET NO Item Criterion AQL 7 Cracked glass 8 Backlight elements 9 Bezel 1 PCBCOB 11 Soldering The height of the COB should not exceed the height indicated in the assembly diagram. 1.4 There may not be more than 2mm of sealant outside the seal area on the PCB. And there should be no more than three places. 1.5 No oxidation or contamination PCB terminals. 1.6 Parts on PCB must be the same as on the production characteristic chart. There should be no wrong parts, missing parts or excess parts. 1.7 The jumper on the PCB should conform to the product characteristic chart. 1.8 If solder gets on bezel tab pads, LED pad, zebra pad or screw hold pad, make sure it is smoothed down. The Scraping testing standard for Copper Coating of PCB X Y X * Y<=2mm Revision: 8-Jan Document Number: ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT

23 LCD-16N1A-NFG-ET NO Item Criterion AQL.65 General 12 appearance Revision: 8-Jan Document Number: ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT

24 LCD-16N1A-NFG-ET 16. Material List of Components for RoHS 1. Declaration that all of or part of products (with the mark N in code), including, but not limited to, the LCM, accessories or packages, manufactured and/or delivered to your company (including your subsidiaries and affiliated company) directly or indirectly by our company (including our subsidiaries or affiliated companies) do not intentionally contain any of the substances listed in all applicable EU directives and regulations, including the following substances.. Exhibit AThe Harmful Material List Material (Cd) (Pb) (Hg) (Cr6+) PBBs PBDEs Limited Value 1 ppm 1 ppm 1 ppm 1 ppm 1 ppm 1 ppm Above limited value is set up according to RoHS. 2.Process for RoHS requirement (1) Use the Sn/Ag/Cu soldering surfacethe surface of Pb-free solder is rougher than we used before. (2) Heat-resistance temp. Reflow25C,3 seconds Max. Connector soldering wave or hand soldering32c, 1 seconds max. (3) Temp. curve of reflow, max. Temp.235C±5 degrees Recommended customer s soldering temp. of connector28c, 3 seconds. Revision: 8-Jan Document Number: ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT

25 Legal Disclaimer Notice Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, ), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on s knowledge of typical requirements that are often placed on products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer s technical experts. Product specifications do not expand or otherwise modify s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the product could result in personal injury or death. Customers using or selling products not expressly indicated for use in such applications do so at their own risk. Please contact authorized personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of. Product names and markings noted herein may be trademarks of their respective owners. 217 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 8-Feb-17 1 Document Number: 91

Number of Characters 20 characters x 4Lines - Module dimension 98.0 x 60.0 x 13.6(MAX) mm. View area 77.0 x 25.2 mm. Active area 70.4 x 20.

Number of Characters 20 characters x 4Lines - Module dimension 98.0 x 60.0 x 13.6(MAX) mm. View area 77.0 x 25.2 mm. Active area 70.4 x 20. 2.Precautions in use of LCD Modules (1)Avoid applying excessive shocks to the module or making any alterations or modifications to it. (2)Don t make extra holes on the printed circuit board, modify its