Airfield Lighting Product Description. SafeCCR IDM8001 Constant Current Regulator

Transcription

1 Product Description SafeCCR IDM8001 Constant Current Regulator

2 Note: This page is blank for convenient double-sided printing.

3 Safegate Group Product Description Date: October 2011 Document: SG_AFL_Product_Description_IDM8001_CCR Version: INTRODUCTION Specification IEC ICAO Aerodrome Design Manual, Part 5, Electrical systems. Application Thyristor type constant current regulator especially designed for supply and control of airport lighting series circuits. Characteristics Powerful and reliable 16-bit microprocessor provides extensive monitoring functions and also possibility for future upgrades. Modular electrical design with plug-in electronic boards and possibility to add options later on. Space saving, user and maintenance friendly mechanical design. 2. MAIN ADVANTAGES Standard functions Display functions: Output current and voltage RMS-values. Input voltage and frequency. Lamp fault no and % of total lamps. Earth fault value. Actual power and load power factor. Apparent power and % of full load value. Cumulative energy consumption. Thyristor element temperature. Time and date. 10 patch fault log with time and date labels. Operating hour counters for all steps. CCR/system information aux displays. Page 1 of 4

4 Safegate Group Product Description Date: October 2011 Document: SG_AFL_Product_Description_IDM8001_CCR Version: 1.1 Monitoring functions Lamp fault: Accuracy ± 1 lamps up to10 faults and ± 3 lamps up to 30 lamps on all brilliancy steps with loads from 50% to full of the CCR rating. No and % of fault lamps displayed. 2 alarm levels with adjustable threshold and delay levels and remote control indication. VA-drop: Monitors the apparent output power against recorded full load values. Selectable tripping option for example. PAPI tilt-switch applications. 2 alarm levels with adjustable threshold and delay levels and remote control indication. Protective functions All protections with adjustable threshold and delay levels, selectable reset mode and remote control indication: Open circuit. Over current. Protections with 2 levels; the first is a pre-warning and the second the actual tripping function: Input voltage, 2 levels. Input frequency, 2 levels. Temperature, 2 levels. Power unit Dry-type output transformer with tapings to adjust the CCR capacity to actual load and therefore to improve the primary power factor of the CCR. Integrated thyristor pair with controller and RC-filter to ensure reliable operation. Passive filter to suppress harmonic distortion and RFI interferences. Local control interface Operation rotary switch: Remote / off / brilliancy steps. All display, monitoring and protective functions easily accessed via graphical multi-function display and 5 soft keys. Remote control interfaces Parallel control: Selectable control mode Dec/Bin and static/impulse. Selectable control voltage 24/48/60V DC. Selectable fail-safe step for static controls. 24 potential free back indication signals. Optional built in DC-source. Serial control: Integrated field-bus cards available for most major field buses. Duplicated interface as an option. Additional measuring data can be transmitted, for example no of lamps, isolation resistance, and so on. Page 2 of 4

5 Safegate Group Product Description Date: October 2011 Document: SG_AFL_Product_Description_IDM8001_CCR Version: 1.1 Optional units Earth fault monitor (E) Measuring range from 50 M ohm to 10 k ohms. Isolation resistance display and 2 alarm levels with adjustable threshold levels and delay times and remote control indication. Selectable maintenance mode provides extended protection by tripping the CCR on level 2 earth fault alarm. Surge arresters (S) Surge arresters on output and input. Parallel control interface with terminal block (PB) Parallel D37 interface is wired to additional terminals. Other features Serial interface, Profibus DP (SP) Serial interface, Modbus TCP (SM) Duplicated serial interface, Profibus DP (S2P) Duplicated serial interface, Modbus TCP (S2M) Assembly Installation alternatives: Floor mounting. Wall mounting. Stack mounting, max. 3 units. Page 3 of 4

6 Safegate Group Product Description Date: October 2011 Document: SG_AFL_Product_Description_IDM8001_CCR Version: TECHNICAL DATA Supply voltage: 230 V %, 50/60Hz. Full power down to -10%. Power ratings: 1 kva. Output current: 6.6 A nominal. Brilliancy control: 7-step control standard. Others on request. Remote control: Parallel or serial interface. Operating temperature: -20 C to +55 C. -40 C to +55 C on request. Dimensions: Width 608 mm. Depth 412 mm, floor mounting. 425 mm, wall mounting. Height 609 mm, floor mounting. 633 mm, wall mounting. Mechanical construction: Protection degree IP 20. Weight 67 kg. 4. ORDERING INFORMATION Description Order code IDM 8001 ES PB Earth fault monitor Surge arresters E S Parallel control interface with terminal block Serial interface, Profibus DP Serial interface, Modbus TCP Duplicated serial interface, Profibus DP Duplicated serial interface, Modbus TCP PB SP SM S2P S2M Note: All descriptions and characteristics in this publication present only general particulars and shall not form part of any contract. The right is reserved to change them without prior notification. Page 4 of 4

7 Note: This page is blank for convenient double-sided printing.

8 Check in to the future How many aircraft can your airport handle today? Can this number be increased without adverse effects on the airport s safety level? It is a known fact that traffic volume will rise in the foreseeable future. More movements will demand monitoring of the entire airport. Requirements will be sharpened and the development of an integrated system controlling not only ground movements but also air traffic close to the airport is of the highest interest. The International Civil Aviation Organization (ICAO) already describes A-SMGCS, Advanced Surface Movement Guidance and Control System, as the answer to the future modern airport need to control the entire airport space in one superior system. To a larger extent than today s systems, A-SMGCS will rely on automated processes to give both pilots and traffic controllers exact information about positions and directions. Safegate Group delivers complete A-SMGCS solutions already, as well as all vital parts relating to it. Safegate Group can check your airport into the future today! Singapore singapore@safegate.com Safegate Group HQ Djurhagegatan 19 SE Malmö, Sweden Phone: +46 (0) Fax: +46 (0) market@safegate.com China china@safegate.com Dubai dubai@safegate.com France france@safegate.com +33 (0) Germany germany@safegate.com +49 (0) Malaysia malaysia@safegate.com Qatar qatar@safegate.com Spain spain@safegate.com UK uk@safegate.com +44 (0) Australia australia@safegate.com +61 (0) Finland finland@safegate.com +358 (0) India india@safegate.com Russia russia@safegate.com USA usa@safegate.com Safegate Group offers solutions for increased safety, efficiency and environmental benefits to airports around the world. The company was founded in 1973 and has its headquarters in Malmö, Sweden. Safegate Group has over 70 partners around the globe in order to be close to its customers. The latest members of Safegate Group, Thorn AFL and Idman, have both over 40 years of experience in airfield lighting solutions for airports and heliports worldwide. Safegate Group s complete range of products and services, a one-stop shop, provides solutions to customers and airborne travellers around the globe. For more contact information and details: